| Message ID | 20200528011658.71590-11-alim.akhtar@samsung.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | exynos-ufs: Add support for UFS HCI | expand |
On Thu, May 28, 2020 at 06:46:58AM +0530, Alim Akhtar wrote: > Adding dt node foe UFS and UFS-PHY for exynos7 SoC. > > Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> > Tested-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> > --- > .../boot/dts/exynos/exynos7-espresso.dts | 4 ++ > arch/arm64/boot/dts/exynos/exynos7.dtsi | 43 ++++++++++++++++++- Thanks, applied to next/dt-late. It might miss this merge window and in such case I will keep it for v5.9 cycle. Best regards, Krzysztof
> -----Original Message----- > From: Krzysztof Kozlowski <krzk@kernel.org> > Sent: 29 May 2020 13:36 > To: Alim Akhtar <alim.akhtar@samsung.com> > Cc: robh@kernel.org; devicetree@vger.kernel.org; linux-scsi@vger.kernel.org; > avri.altman@wdc.com; martin.petersen@oracle.com; > kwmad.kim@samsung.com; stanley.chu@mediatek.com; > cang@codeaurora.org; linux-samsung-soc@vger.kernel.org; linux-arm- > kernel@lists.infradead.org; linux-kernel@vger.kernel.org > Subject: Re: [PATCH v10 10/10] arm64: dts: Add node for ufs exynos7 > > On Thu, May 28, 2020 at 06:46:58AM +0530, Alim Akhtar wrote: > > Adding dt node foe UFS and UFS-PHY for exynos7 SoC. > > > > Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> > > Tested-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> > > --- > > .../boot/dts/exynos/exynos7-espresso.dts | 4 ++ > > arch/arm64/boot/dts/exynos/exynos7.dtsi | 43 ++++++++++++++++++- > > Thanks, applied to next/dt-late. It might miss this merge window and in such > case I will keep it for v5.9 cycle. Thanks Krzysztof. > > Best regards, > Krzysztof
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index 7af288fa9475..790f12ca8981 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -406,6 +406,10 @@ }; }; +&ufs { + status = "okay"; +}; + &usbdrd_phy { vbus-supply = <&usb30_vbus_reg>; vbus-boost-supply = <&usb3drd_boost_5v>; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 5558045637ac..300ad7326ea8 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -220,9 +220,14 @@ #clock-cells = <1>; clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>, <&clock_top1 DOUT_SCLK_MMC0>, - <&clock_top1 DOUT_SCLK_MMC1>; + <&clock_top1 DOUT_SCLK_MMC1>, + <&clock_top1 DOUT_SCLK_UFSUNIPRO20>, + <&clock_top1 DOUT_SCLK_PHY_FSYS1>, + <&clock_top1 DOUT_SCLK_PHY_FSYS1_26M>; clock-names = "fin_pll", "dout_aclk_fsys1_200", - "dout_sclk_mmc0", "dout_sclk_mmc1"; + "dout_sclk_mmc0", "dout_sclk_mmc1", + "dout_sclk_ufsunipro20", "dout_sclk_phy_fsys1", + "dout_sclk_phy_fsys1_26m"; }; serial_0: serial@13630000 { @@ -601,6 +606,40 @@ }; }; + ufs: ufs@15570000 { + compatible = "samsung,exynos7-ufs"; + reg = <0x15570000 0x100>, /* 0: HCI standard */ + <0x15570100 0x100>, /* 1: Vendor specificed */ + <0x15571000 0x200>, /* 2: UNIPRO */ + <0x15572000 0x300>; /* 3: UFS protector */ + reg-names = "hci", "vs_hci", "unipro", "ufsp"; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock_fsys1 ACLK_UFS20_LINK>, + <&clock_fsys1 SCLK_UFSUNIPRO20_USER>; + clock-names = "core_clk", "sclk_unipro_main"; + freq-table-hz = <0 0>, <0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>; + phys = <&ufs_phy>; + phy-names = "ufs-phy"; + status = "disabled"; + }; + + ufs_phy: ufs-phy@15571800 { + compatible = "samsung,exynos7-ufs-phy"; + reg = <0x15571800 0x240>; + reg-names = "phy-pma"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <0>; + clocks = <&clock_fsys1 SCLK_COMBO_PHY_EMBEDDED_26M>, + <&clock_fsys1 PHYCLK_UFS20_RX1_SYMBOL_USER>, + <&clock_fsys1 PHYCLK_UFS20_RX0_SYMBOL_USER>, + <&clock_fsys1 PHYCLK_UFS20_TX0_SYMBOL_USER>; + clock-names = "ref_clk", "rx1_symbol_clk", + "rx0_symbol_clk", + "tx0_symbol_clk"; + }; + usbdrd_phy: phy@15500000 { compatible = "samsung,exynos7-usbdrd-phy"; reg = <0x15500000 0x100>;