diff mbox series

[RFC,v6,4/6] ARM: dts: exynos: Add interconnect properties to Exynos4412 bus nodes

Message ID 20200702163724.2218-5-s.nawrocki@samsung.com (mailing list archive)
State Superseded
Headers show
Series Exynos: Simple QoS for exynos-bus using interconnect | expand

Commit Message

This patch adds the following properties for Exynos4412 interconnect
bus nodes:
 - samsung,interconnect-parent: to declare connections between
   nodes in order to guarantee PM QoS requirements between nodes,
 - #interconnect-cells: required by the interconnect framework,
 - bus-width: the bus width in bits, required to properly derive
   minimum bus clock frequency from requested bandwidth for each
   bus.

Note that #interconnect-cells is always zero and node IDs are not
hardcoded anywhere.

Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
---
Changes for v6:
 - added bus-width property in bus_dmc node.

Changes for v5:
 - adjust to renamed exynos,interconnect-parent-node property,
 - add properties in common exynos4412.dtsi file rather than
   in Odroid specific odroid4412-odroid-common.dtsi.
---
 arch/arm/boot/dts/exynos4412.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

--
2.7.4
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 4886894..24529d4 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -381,6 +381,8 @@ 
 			clocks = <&clock CLK_DIV_DMC>;
 			clock-names = "bus";
 			operating-points-v2 = <&bus_dmc_opp_table>;
+			bus-width = <4>;
+			#interconnect-cells = <0>;
 			status = "disabled";
 		};

@@ -450,6 +452,8 @@ 
 			clocks = <&clock CLK_DIV_GDL>;
 			clock-names = "bus";
 			operating-points-v2 = <&bus_leftbus_opp_table>;
+			samsung,interconnect-parent = <&bus_dmc>;
+			#interconnect-cells = <0>;
 			status = "disabled";
 		};

@@ -466,6 +470,8 @@ 
 			clocks = <&clock CLK_ACLK160>;
 			clock-names = "bus";
 			operating-points-v2 = <&bus_display_opp_table>;
+			samsung,interconnect-parent = <&bus_leftbus>;
+			#interconnect-cells = <0>;
 			status = "disabled";
 		};