diff mbox series

[26/29] arm64: dts: exynos: Harmonize DWC USB3 DT nodes name

Message ID 20201020115959.2658-27-Sergey.Semin@baikalelectronics.ru
State Accepted
Headers show
Series dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name | expand

Commit Message

Serge Semin Oct. 20, 2020, 11:59 a.m. UTC
In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
 arch/arm64/boot/dts/exynos/exynos5433.dtsi | 4 ++--
 arch/arm64/boot/dts/exynos/exynos7.dtsi    | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

Comments

Krzysztof Kozlowski Oct. 20, 2020, 12:43 p.m. UTC | #1
On Tue, Oct 20, 2020 at 02:59:56PM +0300, Serge Semin wrote:
> In accordance with the DWC USB3 bindings the corresponding node
> name is suppose to comply with the Generic USB HCD DT schema, which
> requires the USB nodes to have the name acceptable by the regexp:
> "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
> named.
> 
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> ---
>  arch/arm64/boot/dts/exynos/exynos5433.dtsi | 4 ++--
>  arch/arm64/boot/dts/exynos/exynos7.dtsi    | 2 +-
>  2 files changed, 3 insertions(+), 3 deletions(-)

Thanks for the changes to DTSes. I'll take Exynos bits after the mege
window.

Best regards,
Krzysztof
Serge Semin Oct. 22, 2020, 11:25 a.m. UTC | #2
On Tue, Oct 20, 2020 at 02:43:28PM +0200, Krzysztof Kozlowski wrote:
> On Tue, Oct 20, 2020 at 02:59:56PM +0300, Serge Semin wrote:
> > In accordance with the DWC USB3 bindings the corresponding node
> > name is suppose to comply with the Generic USB HCD DT schema, which
> > requires the USB nodes to have the name acceptable by the regexp:
> > "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
> > named.
> > 
> > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> > ---
> >  arch/arm64/boot/dts/exynos/exynos5433.dtsi | 4 ++--
> >  arch/arm64/boot/dts/exynos/exynos7.dtsi    | 2 +-
> >  2 files changed, 3 insertions(+), 3 deletions(-)
> 

> Thanks for the changes to DTSes. I'll take Exynos bits after the mege
> window.

Ok. Thanks.

-Sergey

> 
> Best regards,
> Krzysztof
>
Krzysztof Kozlowski Oct. 26, 2020, 6:57 p.m. UTC | #3
On Tue, Oct 20, 2020 at 02:59:56PM +0300, Serge Semin wrote:
> In accordance with the DWC USB3 bindings the corresponding node
> name is suppose to comply with the Generic USB HCD DT schema, which
> requires the USB nodes to have the name acceptable by the regexp:
> "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
> named.
> 
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> ---
>  arch/arm64/boot/dts/exynos/exynos5433.dtsi | 4 ++--
>  arch/arm64/boot/dts/exynos/exynos7.dtsi    | 2 +-
>  2 files changed, 3 insertions(+), 3 deletions(-)

Thanks, applied.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 74ac4ac75865..3320e596cb3f 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -1651,7 +1651,7 @@  usbdrd30: usbdrd {
 			ranges;
 			status = "disabled";
 
-			usbdrd_dwc3: dwc3@15400000 {
+			usbdrd_dwc3: usb@15400000 {
 				compatible = "snps,dwc3";
 				clocks = <&cmu_fsys CLK_SCLK_USBDRD30>,
 					<&cmu_fsys CLK_ACLK_USBDRD30>,
@@ -1704,7 +1704,7 @@  usbhost30: usbhost {
 			ranges;
 			status = "disabled";
 
-			usbhost_dwc3: dwc3@15a00000 {
+			usbhost_dwc3: usb@15a00000 {
 				compatible = "snps,dwc3";
 				clocks = <&cmu_fsys CLK_SCLK_USBHOST30>,
 					<&cmu_fsys CLK_ACLK_USBHOST30>,
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index b9ed6a33e290..48cd3a04fd07 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -654,7 +654,7 @@  usbdrd3 {
 			#size-cells = <1>;
 			ranges;
 
-			dwc3@15400000 {
+			usb@15400000 {
 				compatible = "snps,dwc3";
 				reg = <0x15400000 0x10000>;
 				interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;