diff mbox series

[2/5] ARM: dts: add Samsung's exynos4412-based p4note boards

Message ID 20201024144421.34435-3-martin.juecker@gmail.com
State Superseded
Headers show
Series add exynos4412-based p4note device family support | expand

Commit Message

Martin Jücker Oct. 24, 2020, 2:44 p.m. UTC
The p4note family contains a couple of variants of the Galaxy Note 10.1
tablet with mainly different modems. The GT-N8010/GT-N8013 is the wifi
only version.

Signed-off-by: Martin Jücker <martin.juecker@gmail.com>
---
 arch/arm/boot/dts/Makefile                    |    1 +
 arch/arm/boot/dts/exynos4412-p4note-n801x.dts |   16 +
 arch/arm/boot/dts/exynos4412-p4note.dtsi      | 1057 +++++++++++++++++
 3 files changed, 1074 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos4412-p4note-n801x.dts
 create mode 100644 arch/arm/boot/dts/exynos4412-p4note.dtsi

Comments

Marek Szyprowski Oct. 26, 2020, 11:55 a.m. UTC | #1
Hi Martin,

On 24.10.2020 16:44, Martin Jücker wrote:
> The p4note family contains a couple of variants of the Galaxy Note 10.1
> tablet with mainly different modems. The GT-N8010/GT-N8013 is the wifi
> only version.
>
> Signed-off-by: Martin Jücker <martin.juecker@gmail.com>
> ---
>   arch/arm/boot/dts/Makefile                    |    1 +
>   arch/arm/boot/dts/exynos4412-p4note-n801x.dts |   16 +
>   arch/arm/boot/dts/exynos4412-p4note.dtsi      | 1057 +++++++++++++++++
>   3 files changed, 1074 insertions(+)
>   create mode 100644 arch/arm/boot/dts/exynos4412-p4note-n801x.dts
>   create mode 100644 arch/arm/boot/dts/exynos4412-p4note.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 4572db3fa5ae..b6d72bd7ebac 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -195,6 +195,7 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \
>   	exynos4412-odroidx.dtb \
>   	exynos4412-odroidx2.dtb \
>   	exynos4412-origen.dtb \
> +	exynos4412-p4note-n801x.dtb \
>   	exynos4412-smdk4412.dtb \
>   	exynos4412-tiny4412.dtb \
>   	exynos4412-trats2.dtb
> diff --git a/arch/arm/boot/dts/exynos4412-p4note-n801x.dts b/arch/arm/boot/dts/exynos4412-p4note-n801x.dts
> new file mode 100644
> index 000000000000..e7fb5b96e6c6
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos4412-p4note-n801x.dts
> @@ -0,0 +1,16 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Samsung's Galaxy Note 10.1 - N801x (wifi only version)
> + *
> + * Copyright (c) 2020 Martin Jücker <martin.juecker@gmail.com>
> + */
> +
> +/dts-v1/;
> +#include "exynos4412-p4note.dtsi"
> +
> +/ {
> +	model = "Samsung Galaxy Note 10.1 (GT-N8010/N8013) based on Exynos4412";
> +	compatible = "samsung,n801x", "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
> +
> +	/* this is the base variant without any kind of modem */
> +};
> diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
> new file mode 100644
> index 000000000000..6d7e84f40e92
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
> @@ -0,0 +1,1057 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Samsung's Exynos4412 based p4note device family base DT
> + *
> + * Copyright (c) 2020 Martin Jücker <martin.juecker@gmail.com>
> + */
> +
> +/dts-v1/;
> +#include "exynos4412.dtsi"
> +#include "exynos4412-ppmu-common.dtsi"
> +
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/gpio-keys.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/clock/maxim,max77686.h>
> +#include <dt-bindings/pinctrl/samsung.h>
> +
> +/ {
> +	compatible = "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
> +
> +	memory@40000000 {
> +		device_type = "memory";
> +		reg = <0x40000000 0x80000000>;
> +	};
> +
> +	chosen {
> +		stdout-path = &serial_2;
> +	};
> +
> +	firmware@204f000 {
> +		compatible = "samsung,secure-firmware";
> +		reg = <0x0204F000 0x1000>;
> +	};
> +
> +	fixed-rate-clocks {
> +		xxti {
> +			compatible = "samsung,clock-xxti";
> +			clock-frequency = <0>;
> +		};
> +
> +		xusbxti {
> +			compatible = "samsung,clock-xusbxti";
> +			clock-frequency = <24000000>;
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&gpio_keys>;
> +
> +		key-down {
> +			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_VOLUMEDOWN>;
> +			label = "volume down";
> +			debounce-interval = <10>;
> +		};
> +
> +		key-up {
> +			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_VOLUMEUP>;
> +			label = "volume up";
> +			debounce-interval = <10>;
> +		};
> +
> +		key-power {
> +			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_POWER>;
> +			label = "power";
> +			debounce-interval = <10>;
> +			linux,can-disable;
> +			wakeup-source;
> +		};
> +	};
> +
> +	tsp_reg_1: voltage-regulator-1 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "TSP_FIXED_VOLTAGES_1";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&tsp_reg_gpio_1>;
> +		gpios = <&gpm4 5 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		regulator-always-on;
> +	};
> +
> +	tsp_reg_2: voltage-regulator-2 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "TSP_FIXED_VOLTAGES_2";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&tsp_reg_gpio_2>;
> +		gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		regulator-always-on;
> +	};
> +
> +	tsp_reg_3: voltage-regulator-3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "TSP_FIXED_VOLTAGES_3";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&tsp_reg_gpio_3>;
> +		gpios = <&gpb 7 GPIO_ACTIVE_HIGH>;
> +		startup-delay-us = <20000>;
> +		enable-active-high;
> +		regulator-always-on;
> +	};
> +
> +	wlan_pwrseq: sdhci3-pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +		reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>;
> +		pinctrl-0 = <&wifi_reset>;
> +		pinctrl-names = "default";
> +		clocks = <&max77686 MAX77686_CLK_PMIC>;
> +		clock-names = "ext_clock";
> +	};
> +
> +	i2c-gpio-10 {
> +		compatible = "i2c-gpio";
> +		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +		i2c-gpio,delay-us = <2>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ak8975@c {
> +			compatible = "asahi-kasei,ak8975";
> +			reg = <0x0c>;
> +			interrupt-parent = <&gpm4>;
> +			interrupts = <7 IRQ_TYPE_EDGE_RISING>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&ak8975_irq>;
> +		};
> +	};
> +
> +	i2c-gpio-14 {
> +		compatible = "i2c-gpio";
> +		sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +		scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +		i2c-gpio,delay-us = <2>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		max17042@36 {
> +			compatible = "maxim,max17042";
> +			reg = <0x36>;
> +			interrupt-parent = <&gpx2>;
> +			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
> +			maxim,rsns-microohm = <10000>;
> +			maxim,over-heat-temp = <600>;
> +			maxim,over-volt = <4300>;
> +		};
> +	};
> +
> +	i2c-gpio-19 {
> +		compatible = "i2c-gpio";
> +		sda-gpios = <&gpm4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +		scl-gpios = <&gpm4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +		i2c-gpio,delay-us = <5>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		stmpe_mfd@41 {
> +			compatible = "st,stmpe811";
> +			reg = <0x41>;
> +			interrupt-parent = <&gpx0>;
> +			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
> +			interrupt-controller;
> +			irq-trigger = <0x1>;
> +			st,adc-freq = <3>;
> +			st,mod-12b = <1>;
> +			st,ref-sel = <0>;
> +			st,sample-time = <3>;
> +
> +			stmpe_adc: stmpe_adc {
> +				compatible = "st,stmpe-adc";
> +				#io-channel-cells = <1>;
> +				st,norequest-mask = <0x2F>;
> +			};
> +		};
> +	};
> +};
> +
> +&adc {
> +	status = "okay";
> +};
> +
> +&bus_dmc {
> +	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
> +	vdd-supply = <&buck1_reg>;
> +	status = "okay";
> +};
> +
> +&bus_acp {
> +	devfreq = <&bus_dmc>;
> +	status = "okay";
> +};
> +
> +&bus_c2c {
> +	devfreq = <&bus_dmc>;
> +	status = "okay";
> +};
> +
> +&bus_leftbus {
> +	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
> +	vdd-supply = <&buck3_reg>;
> +	status = "okay";
> +};
> +
> +&bus_rightbus {
> +	devfreq = <&bus_leftbus>;
> +	status = "okay";
> +};
> +
> +&bus_display {
> +	devfreq = <&bus_leftbus>;
> +	status = "okay";
> +};
> +
> +&bus_fsys {
> +	devfreq = <&bus_leftbus>;
> +	status = "okay";
> +};
> +
> +&bus_peri {
> +	devfreq = <&bus_leftbus>;
> +	status = "okay";
> +};
> +
> +&bus_mfc {
> +	devfreq = <&bus_leftbus>;
> +	status = "okay";
> +};
> +
> +&cpu0 {
> +	cpu0-supply = <&buck2_reg>;
> +};
> +
> +&cpu_thermal {
> +	cooling-maps {
> +		map0 {
> +			/* Corresponds to 800MHz at freq_table */
> +			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, <&cpu2 7 7>, <&cpu3 7 7>;
> +		};
> +		map1 {
> +			/* Corresponds to 200MHz at freq_table */
> +			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>, <&cpu2 13 13>, <&cpu3 13 13>;
> +		};
> +	};
> +};
> +
> +&ehci {
> +	status = "okay";
> +};
Which EHCI ports are used on this board? You probably need to limit PHYs 
only to the supported ports (see exynos4412-odroidu3.dts for the example).
> +
> +&exynos_usbphy {
> +	status = "okay";
> +};
> +
> +&fimd {
> +	pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	display-timings {
> +		timing0 {
> +			clock-frequency = <66666666>;
> +			hactive = <1280>;
> +			vactive = <800>;
> +			hfront-porch = <18>;
> +			hback-porch = <36>;
> +			hsync-len = <16>;
> +			vback-porch = <16>;
> +			vfront-porch = <4>;
> +			vsync-len = <3>;
> +			hsync-active = <1>;
> +		};
> +	};

IMHO using a proper panel binding and simple-panel driver is a more 
appropriate approach, see exynos4412-tiny4412.dts for the example.

> +};
> +
> +&gpu {
> +	mali-supply = <&buck4_reg>;
> +	status = "okay";
> +};
> +
> +&hsotg {
> +	vusb_a-supply = <&ldo12_reg>;
> +	dr_mode = "peripheral";
> +	status = "okay";
> +};
> +
> +&i2c_3 {
> +	samsung,i2c-sda-delay = <100>;
> +	samsung,i2c-slave-addr = <0x10>;
> +	samsung,i2c-max-bus-freq = <400000>;
> +	pinctrl-0 = <&i2c3_bus>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	touchscreen@4a {
> +		compatible = "atmel,maxtouch";
> +		reg = <0x4a>;
> +		reset-gpios = <&gpm0 4 GPIO_ACTIVE_HIGH>;
> +		interrupt-parent = <&gpm2>;
> +		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> +		pinctrl-0 = <&tsp_rst &tsp_irq>;
> +		pinctrl-names = "default";
> +	};
> +};
> +
> +&i2c_7 {
> +	samsung,i2c-sda-delay = <100>;
> +	samsung,i2c-slave-addr = <0x10>;
> +	samsung,i2c-max-bus-freq = <400000>;
> +	pinctrl-0 = <&i2c7_bus>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	max77686: max77686_pmic@9 {
> +		compatible = "maxim,max77686";
> +		interrupt-parent = <&gpx0>;
> +		interrupts = <7 IRQ_TYPE_NONE>;
> +		pinctrl-0 = <&max77686_irq>;
> +		pinctrl-names = "default";
> +		reg = <0x09>;
> +		#clock-cells = <1>;
> +
> +		voltage-regulators {
> +
> +			/* WM8994 audio */
> +			ldo3_reg: LDO3 {
> +				regulator-name = "VCC_1.8V_AP";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +				};
> +			};
> +
> +			/* Unknown */
> +			ldo5_reg: LDO5 {
> +				regulator-name = "VCC_1.8V_IO";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			/* CSI IP block */
> +			ldo8_reg: LDO8 {
> +				regulator-name = "VMIPI_1.0V";
> +				regulator-min-microvolt = <1000000>;
> +				regulator-max-microvolt = <1000000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +				};
> +			};
> +
> +			/* IR LED on/off */
> +			ldo9_reg: LDO9 {
> +				regulator-name = "VLED_IC_1.9V";
> +				regulator-min-microvolt = <1950000>;
> +				regulator-max-microvolt = <1950000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			/* CSI IP block */
> +			ldo10_reg: LDO10 {
> +				regulator-name = "VMIPI_1.8V";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +				};
> +			};
> +
> +			/* Unknown */
> +			ldo11_reg: LDO11 {
> +				regulator-name = "VABB1_1.9V";
> +				regulator-min-microvolt = <1950000>;
> +				regulator-max-microvolt = <1950000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			/* USB OTG */
> +			ldo12_reg: LDO12 {
> +				regulator-name = "VUOTG_3.0V";
> +				regulator-min-microvolt = <3000000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +				};
> +			};
> +
> +			/* Unknown */
> +			ldo14_reg: LDO14 {
> +				regulator-name = "VABB2_1.9V";
> +				regulator-min-microvolt = <1950000>;
> +				regulator-max-microvolt = <1950000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			/* Camera ISX012 */
> +			ldo18_reg: LDO18 {
> +				regulator-name = "CAM_IO_1.8V";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			/* Camera S5K6A3 */
> +			ldo19_reg: LDO19 {
> +				regulator-name = "VT_CORE_1.8V";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			/* MMC2 */
> +			ldo21_reg: LDO21 {
> +				regulator-name = "VTF_2.8V";
> +				regulator-min-microvolt = <2800000>;
> +				regulator-max-microvolt = <2800000>;
> +				maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
> +			};
> +
> +			/* ADC */
> +			ldo23_reg: LDO23 {
> +				regulator-name = "VDD_ADC_3.3V";
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			/* Camera S5K6A3 */
> +			ldo24_reg: LDO24 {
> +				regulator-name = "CAM_A2.8V";
> +				regulator-min-microvolt = <2800000>;
> +				regulator-max-microvolt = <2800000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			/* IR LED sending */
> +			ldo25_reg: LDO25 {
> +				regulator-name = "VLED_3.3V";
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			/* Camera ISX012 */
> +			ldo26_reg: LDO26 {
> +				regulator-name = "3MP_AF_2.8V";
> +				regulator-min-microvolt = <2800000>;
> +				regulator-max-microvolt = <2800000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			buck1_reg: BUCK1 {
> +				regulator-name = "VDD_MIF";
> +				regulator-min-microvolt = <850000>;
> +				regulator-max-microvolt = <1050000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			buck2_reg: BUCK2 {
> +				regulator-name = "VDD_ARM";
> +				regulator-min-microvolt = <850000>;
> +				regulator-max-microvolt = <1500000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			buck3_reg: BUCK3 {
> +				regulator-name = "VDD_INT";
> +				regulator-min-microvolt = <850000>;
> +				regulator-max-microvolt = <1100000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			buck4_reg: BUCK4 {
> +				regulator-name = "VDD_G3D";
> +				regulator-min-microvolt = <850000>;
> +				regulator-max-microvolt = <1075000>;
> +				regulator-boot-on;
> +			};
> +
> +			buck9_reg: BUCK9 {
> +				regulator-name = "3MP_CORE_1.2V";
> +				regulator-min-microvolt = <1200000>;
> +				regulator-max-microvolt = <1200000>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&mshc_0 {
> +	broken-cd;
> +	non-removable;
> +	card-detect-delay = <200>;
> +	clock-frequency = <400000000>;
> +	samsung,dw-mshc-ciu-div = <0>;
> +	samsung,dw-mshc-sdr-timing = <2 3>;
> +	samsung,dw-mshc-ddr-timing = <1 2>;
> +	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
> +	pinctrl-names = "default";
> +	bus-width = <4>;
> +	cap-mmc-highspeed;
> +	cap-sd-highspeed;
> +	status = "okay";
> +};
> +
> +&pinctrl_0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sleep0>;
> +
> +	tsp_reg_gpio_2: tsp-reg-gpio-2 {
> +		samsung,pins = "gpb-5";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> +	};
> +
> +	tsp_reg_gpio_3: tsp-reg-gpio-3 {
> +		samsung,pins = "gpb-7";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> +	};
> +
> +	sleep0: sleep-states {
> +		PIN_SLP(gpa0-0, INPUT, NONE);
> +		PIN_SLP(gpa0-1, OUT0, NONE);
> +		PIN_SLP(gpa0-2, INPUT, NONE);
> +		PIN_SLP(gpa0-3, INPUT, UP);
> +		PIN_SLP(gpa0-4, INPUT, NONE);
> +		PIN_SLP(gpa0-5, INPUT, DOWN);
> +		PIN_SLP(gpa0-6, INPUT, DOWN);
> +		PIN_SLP(gpa0-7, INPUT, UP);
> +
> +		PIN_SLP(gpa1-0, INPUT, DOWN);
> +		PIN_SLP(gpa1-1, INPUT, DOWN);
> +		PIN_SLP(gpa1-2, INPUT, DOWN);
> +		PIN_SLP(gpa1-3, INPUT, DOWN);
> +		PIN_SLP(gpa1-4, INPUT, DOWN);
> +		PIN_SLP(gpa1-5, INPUT, DOWN);
> +
> +		PIN_SLP(gpb-0, INPUT, NONE);
> +		PIN_SLP(gpb-1, INPUT, NONE);
> +		PIN_SLP(gpb-2, INPUT, NONE);
> +		PIN_SLP(gpb-3, INPUT, NONE);
> +		PIN_SLP(gpb-4, INPUT, DOWN);
> +		PIN_SLP(gpb-5, INPUT, DOWN);
> +		PIN_SLP(gpb-6, INPUT, DOWN);
> +		PIN_SLP(gpb-7, INPUT, DOWN);
> +
> +		PIN_SLP(gpc0-0, INPUT, DOWN);
> +		PIN_SLP(gpc0-1, INPUT, DOWN);
> +		PIN_SLP(gpc0-2, INPUT, DOWN);
> +		PIN_SLP(gpc0-3, INPUT, DOWN);
> +		PIN_SLP(gpc0-4, INPUT, DOWN);
> +
> +		PIN_SLP(gpc1-0, INPUT, UP);
> +		PIN_SLP(gpc1-1, PREV, NONE);
> +		PIN_SLP(gpc1-2, INPUT, UP);
> +		PIN_SLP(gpc1-3, INPUT, UP);
> +		PIN_SLP(gpc1-4, INPUT, UP);
> +
> +		PIN_SLP(gpd0-0, INPUT, DOWN);
> +		PIN_SLP(gpd0-1, OUT0, NONE);
> +		PIN_SLP(gpd0-2, INPUT, NONE);
> +		PIN_SLP(gpd0-3, INPUT, NONE);
> +
> +		PIN_SLP(gpd1-0, INPUT, DOWN);
> +		PIN_SLP(gpd1-1, INPUT, DOWN);
> +		PIN_SLP(gpd1-2, INPUT, NONE);
> +		PIN_SLP(gpd1-3, INPUT, NONE);
> +
> +		PIN_SLP(gpf0-0, OUT0, NONE);
> +		PIN_SLP(gpf0-1, OUT0, NONE);
> +		PIN_SLP(gpf0-2, OUT0, NONE);
> +		PIN_SLP(gpf0-3, OUT0, NONE);
> +		PIN_SLP(gpf0-4, OUT0, NONE);
> +		PIN_SLP(gpf0-5, OUT0, NONE);
> +		PIN_SLP(gpf0-6, OUT0, NONE);
> +		PIN_SLP(gpf0-7, OUT0, NONE);
> +
> +		PIN_SLP(gpf1-0, OUT0, NONE);
> +		PIN_SLP(gpf1-1, OUT0, NONE);
> +		PIN_SLP(gpf1-2, OUT0, NONE);
> +		PIN_SLP(gpf1-3, OUT0, NONE);
> +		PIN_SLP(gpf1-4, OUT0, NONE);
> +		PIN_SLP(gpf1-5, OUT0, NONE);
> +		PIN_SLP(gpf1-6, OUT0, NONE);
> +		PIN_SLP(gpf1-7, OUT0, NONE);
> +
> +		PIN_SLP(gpf2-0, OUT0, NONE);
> +		PIN_SLP(gpf2-1, OUT0, NONE);
> +		PIN_SLP(gpf2-2, OUT0, NONE);
> +		PIN_SLP(gpf2-3, OUT0, NONE);
> +		PIN_SLP(gpf2-4, OUT0, NONE);
> +		PIN_SLP(gpf2-5, OUT0, NONE);
> +		PIN_SLP(gpf2-6, OUT0, NONE);
> +		PIN_SLP(gpf2-7, OUT0, NONE);
> +
> +		PIN_SLP(gpf3-0, OUT0, NONE);
> +		PIN_SLP(gpf3-1, OUT0, NONE);
> +		PIN_SLP(gpf3-2, OUT0, NONE);
> +		PIN_SLP(gpf3-3, OUT0, NONE);
> +		PIN_SLP(gpf3-4, OUT0, NONE);
> +		PIN_SLP(gpf3-5, OUT0, NONE);
> +
> +		PIN_SLP(gpj0-0, INPUT, DOWN);
> +		PIN_SLP(gpj0-1, INPUT, DOWN);
> +		PIN_SLP(gpj0-2, INPUT, DOWN);
> +		PIN_SLP(gpj0-3, PREV, NONE);
> +		PIN_SLP(gpj0-4, PREV, NONE);
> +		PIN_SLP(gpj0-5, OUT0, NONE);
> +		PIN_SLP(gpj0-6, OUT0, NONE);
> +		PIN_SLP(gpj0-7, OUT0, NONE);
> +
> +		PIN_SLP(gpj1-0, OUT0, NONE);
> +		PIN_SLP(gpj1-1, INPUT, DOWN);
> +		PIN_SLP(gpj1-2, PREV, NONE);
> +		PIN_SLP(gpj1-3, OUT0, NONE);
> +	};
> +};
> +
> +&pinctrl_1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sleep1>;
> +
> +	uart_sel: uart-sel {
> +		samsung,pins = "gpl2-7";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> +		samsung,pin-val = <1>;
> +		/* 0 = CP, 1 = AP (serial output) */
> +	};
> +
> +	gpio_keys: gpio-keys {
> +		samsung,pins = "gpx2-2", "gpx2-7", "gpx3-3";
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> +	};
> +
> +	wifi_host_wake: wifi-host-wake {
> +		samsung,pins = "gpx2-5";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> +	};
> +
> +	bt_shutdown: bt-shutdown {
> +		samsung,pins = "gpl0-6";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> +		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> +		samsung,pin-val = <1>;
> +	};
> +
> +	bt_device_wakeup: bt-device-wakeup {
> +		samsung,pins = "gpx3-1";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> +	};
> +
> +	bt_host_wakeup: bt-host-wakeup {
> +		samsung,pins = "gpx2-6";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> +		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> +	};
> +
> +	max77686_irq: max77686-irq {
> +		samsung,pins = "gpx0-7";
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> +	};
> +
> +	sdhci2_cd_irq: sdhci2-cd-irq {
> +		samsung,pins = "gpx3-4";
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> +	};
> +
> +	tsp_rst: tsp-rst {
> +		samsung,pins = "gpm0-4";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> +		samsung,pin-val = <1>;
> +	};
> +
> +	tsp_reg_gpio_1: tsp-reg-gpio-1 {
> +		samsung,pins = "gpm4-5";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> +	};
> +
> +	tsp_irq: tsp-irq {
> +		samsung,pins = "gpm2-3";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> +	};
> +
> +	wifi_reset: wifi-reset {
> +		samsung,pins = "gpm3-5";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> +	};
> +
> +	sd3_wifi: sd3-wifi {
> +		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> +	};
> +
> +	ak8975_irq: ak8975-irq {
> +		samsung,pins = "gpm4-7";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> +	};
> +
> +	sleep1: sleep-states {
> +		PIN_SLP(gpk0-0, PREV, NONE);
> +		PIN_SLP(gpk0-1, PREV, NONE);
> +		PIN_SLP(gpk0-2, PREV, NONE);
> +		PIN_SLP(gpk0-3, PREV, NONE);
> +		PIN_SLP(gpk0-4, PREV, NONE);
> +		PIN_SLP(gpk0-5, PREV, NONE);
> +		PIN_SLP(gpk0-6, PREV, NONE);
> +
> +		PIN_SLP(gpk1-0, INPUT, DOWN);
> +		PIN_SLP(gpk1-1, INPUT, DOWN);
> +		PIN_SLP(gpk1-2, INPUT, DOWN);
> +		PIN_SLP(gpk1-3, PREV, NONE);
> +		PIN_SLP(gpk1-4, PREV, NONE);
> +		PIN_SLP(gpk1-5, PREV, NONE);
> +		PIN_SLP(gpk1-6, PREV, NONE);
> +
> +		PIN_SLP(gpk2-0, INPUT, DOWN);
> +		PIN_SLP(gpk2-1, INPUT, DOWN);
> +		PIN_SLP(gpk2-2, INPUT, DOWN);
> +		PIN_SLP(gpk2-3, INPUT, DOWN);
> +		PIN_SLP(gpk2-4, INPUT, DOWN);
> +		PIN_SLP(gpk2-5, INPUT, DOWN);
> +		PIN_SLP(gpk2-6, INPUT, DOWN);
> +
> +		PIN_SLP(gpk3-0, OUT0, NONE);
> +		PIN_SLP(gpk3-1, INPUT, NONE);
> +		PIN_SLP(gpk3-2, INPUT, DOWN);
> +		PIN_SLP(gpk3-3, INPUT, NONE);
> +		PIN_SLP(gpk3-4, INPUT, NONE);
> +		PIN_SLP(gpk3-5, INPUT, NONE);
> +		PIN_SLP(gpk3-6, INPUT, NONE);
> +
> +		PIN_SLP(gpl0-0, OUT0, NONE);
> +		PIN_SLP(gpl0-1, INPUT, NONE);
> +		PIN_SLP(gpl0-2, INPUT, NONE);
> +		PIN_SLP(gpl0-3, INPUT, DOWN);
> +		PIN_SLP(gpl0-4, PREV, NONE);
> +		PIN_SLP(gpl0-6, PREV, NONE);
> +
> +		PIN_SLP(gpl1-0, OUT0, NONE);
> +		PIN_SLP(gpl1-1, OUT0, NONE);
> +
> +		PIN_SLP(gpl2-0, INPUT, DOWN);
> +		PIN_SLP(gpl2-1, INPUT, DOWN);
> +		PIN_SLP(gpl2-2, INPUT, DOWN);
> +		PIN_SLP(gpl2-3, INPUT, DOWN);
> +		PIN_SLP(gpl2-4, OUT0, NONE);
> +		PIN_SLP(gpl2-5, INPUT, DOWN);
> +		PIN_SLP(gpl2-6, PREV, NONE);
> +		PIN_SLP(gpl2-7, PREV, NONE);
> +
> +		PIN_SLP(gpm0-0, PREV, NONE);
> +		PIN_SLP(gpm0-1, OUT0, NONE);
> +		PIN_SLP(gpm0-2, INPUT, DOWN);
> +		PIN_SLP(gpm0-3, INPUT, NONE);
> +		PIN_SLP(gpm0-4, OUT0, NONE);
> +		PIN_SLP(gpm0-5, OUT0, NONE);
> +		PIN_SLP(gpm0-6, INPUT, DOWN);
> +		PIN_SLP(gpm0-7, OUT0, NONE);
> +
> +		PIN_SLP(gpm1-0, INPUT, NONE);
> +		PIN_SLP(gpm1-1, INPUT, NONE);
> +		PIN_SLP(gpm1-2, INPUT, NONE);
> +		PIN_SLP(gpm1-3, INPUT, NONE);
> +		PIN_SLP(gpm1-4, INPUT, NONE);
> +		PIN_SLP(gpm1-5, INPUT, NONE);
> +		PIN_SLP(gpm1-6, INPUT, DOWN);
> +
> +		PIN_SLP(gpm2-0, INPUT, NONE);
> +		PIN_SLP(gpm2-1, INPUT, NONE);
> +		PIN_SLP(gpm2-2, OUT0, NONE);
> +		PIN_SLP(gpm2-3, OUT0, DOWN);
> +		PIN_SLP(gpm2-4, INPUT, DOWN);
> +
> +		PIN_SLP(gpm3-0, PREV, NONE);
> +		PIN_SLP(gpm3-1, PREV, NONE);
> +		PIN_SLP(gpm3-2, PREV, NONE);
> +		PIN_SLP(gpm3-3, OUT1, NONE);
> +		PIN_SLP(gpm3-4, OUT0, DOWN);
> +		PIN_SLP(gpm3-5, PREV, NONE);
> +		PIN_SLP(gpm3-6, PREV, NONE);
> +		PIN_SLP(gpm3-7, OUT0, NONE);
> +
> +		PIN_SLP(gpm4-0, INPUT, NONE);
> +		PIN_SLP(gpm4-1, INPUT, NONE);
> +		PIN_SLP(gpm4-2, INPUT, DOWN);
> +		PIN_SLP(gpm4-3, INPUT, DOWN);
> +		PIN_SLP(gpm4-4, PREV, NONE);
> +		PIN_SLP(gpm4-5, OUT0, NONE);
> +		PIN_SLP(gpm4-6, OUT0, NONE);
> +		PIN_SLP(gpm4-7, INPUT, DOWN);
> +
> +		PIN_SLP(gpy0-0, INPUT, DOWN);
> +		PIN_SLP(gpy0-1, INPUT, DOWN);
> +		PIN_SLP(gpy0-2, INPUT, NONE);
> +		PIN_SLP(gpy0-3, INPUT, NONE);
> +		PIN_SLP(gpy0-4, INPUT, NONE);
> +		PIN_SLP(gpy0-5, INPUT, NONE);
> +
> +		PIN_SLP(gpy1-0, INPUT, DOWN);
> +		PIN_SLP(gpy1-1, INPUT, DOWN);
> +		PIN_SLP(gpy1-2, INPUT, DOWN);
> +		PIN_SLP(gpy1-3, INPUT, DOWN);
> +
> +		PIN_SLP(gpy2-0, PREV, NONE);
> +		PIN_SLP(gpy2-1, INPUT, DOWN);
> +		PIN_SLP(gpy2-2, INPUT, NONE);
> +		PIN_SLP(gpy2-3, INPUT, NONE);
> +		PIN_SLP(gpy2-4, INPUT, NONE);
> +		PIN_SLP(gpy2-5, INPUT, NONE);
> +
> +		PIN_SLP(gpy3-0, INPUT, DOWN);
> +		PIN_SLP(gpy3-1, INPUT, DOWN);
> +		PIN_SLP(gpy3-2, INPUT, DOWN);
> +		PIN_SLP(gpy3-3, INPUT, DOWN);
> +		PIN_SLP(gpy3-4, INPUT, DOWN);
> +		PIN_SLP(gpy3-5, INPUT, DOWN);
> +		PIN_SLP(gpy3-6, INPUT, DOWN);
> +		PIN_SLP(gpy3-7, INPUT, DOWN);
> +
> +		PIN_SLP(gpy4-0, INPUT, DOWN);
> +		PIN_SLP(gpy4-1, INPUT, DOWN);
> +		PIN_SLP(gpy4-2, INPUT, DOWN);
> +		PIN_SLP(gpy4-3, INPUT, DOWN);
> +		PIN_SLP(gpy4-4, INPUT, DOWN);
> +		PIN_SLP(gpy4-5, INPUT, DOWN);
> +		PIN_SLP(gpy4-6, INPUT, DOWN);
> +		PIN_SLP(gpy4-7, INPUT, DOWN);
> +
> +		PIN_SLP(gpy5-0, INPUT, DOWN);
> +		PIN_SLP(gpy5-1, INPUT, DOWN);
> +		PIN_SLP(gpy5-2, INPUT, DOWN);
> +		PIN_SLP(gpy5-3, INPUT, DOWN);
> +		PIN_SLP(gpy5-4, INPUT, DOWN);
> +		PIN_SLP(gpy5-5, INPUT, DOWN);
> +		PIN_SLP(gpy5-6, INPUT, DOWN);
> +		PIN_SLP(gpy5-7, INPUT, DOWN);
> +
> +		PIN_SLP(gpy6-0, INPUT, DOWN);
> +		PIN_SLP(gpy6-1, INPUT, DOWN);
> +		PIN_SLP(gpy6-2, INPUT, DOWN);
> +		PIN_SLP(gpy6-3, INPUT, DOWN);
> +		PIN_SLP(gpy6-4, INPUT, DOWN);
> +		PIN_SLP(gpy6-5, INPUT, DOWN);
> +		PIN_SLP(gpy6-6, INPUT, DOWN);
> +		PIN_SLP(gpy6-7, INPUT, DOWN);
> +	};
> +};
> +
> +&pinctrl_2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sleep2>;
> +
> +	sleep2: sleep-states {
> +		PIN_SLP(gpz-0, INPUT, DOWN);
> +		PIN_SLP(gpz-1, INPUT, DOWN);
> +		PIN_SLP(gpz-2, INPUT, DOWN);
> +		PIN_SLP(gpz-3, INPUT, DOWN);
> +		PIN_SLP(gpz-4, INPUT, DOWN);
> +		PIN_SLP(gpz-5, INPUT, DOWN);
> +		PIN_SLP(gpz-6, INPUT, DOWN);
> +	};
> +};
> +
> +&pinctrl_3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sleep3>;
> +
> +	sleep3: sleep-states {
> +		PIN_SLP(gpv0-0, INPUT, DOWN);
> +		PIN_SLP(gpv0-1, INPUT, DOWN);
> +		PIN_SLP(gpv0-2, INPUT, DOWN);
> +		PIN_SLP(gpv0-3, INPUT, DOWN);
> +		PIN_SLP(gpv0-4, INPUT, DOWN);
> +		PIN_SLP(gpv0-5, INPUT, DOWN);
> +		PIN_SLP(gpv0-6, INPUT, DOWN);
> +		PIN_SLP(gpv0-7, INPUT, DOWN);
> +
> +		PIN_SLP(gpv1-0, INPUT, DOWN);
> +		PIN_SLP(gpv1-1, INPUT, DOWN);
> +		PIN_SLP(gpv1-2, INPUT, DOWN);
> +		PIN_SLP(gpv1-3, INPUT, DOWN);
> +		PIN_SLP(gpv1-4, INPUT, DOWN);
> +		PIN_SLP(gpv1-5, INPUT, DOWN);
> +		PIN_SLP(gpv1-6, INPUT, DOWN);
> +		PIN_SLP(gpv1-7, INPUT, DOWN);
> +
> +		PIN_SLP(gpv2-0, INPUT, DOWN);
> +		PIN_SLP(gpv2-1, INPUT, DOWN);
> +		PIN_SLP(gpv2-2, INPUT, DOWN);
> +		PIN_SLP(gpv2-3, INPUT, DOWN);
> +		PIN_SLP(gpv2-4, INPUT, DOWN);
> +		PIN_SLP(gpv2-5, INPUT, DOWN);
> +		PIN_SLP(gpv2-6, INPUT, DOWN);
> +		PIN_SLP(gpv2-7, INPUT, DOWN);
> +
> +		PIN_SLP(gpv3-0, INPUT, DOWN);
> +		PIN_SLP(gpv3-1, INPUT, DOWN);
> +		PIN_SLP(gpv3-2, INPUT, DOWN);
> +		PIN_SLP(gpv3-3, INPUT, DOWN);
> +		PIN_SLP(gpv3-4, INPUT, DOWN);
> +		PIN_SLP(gpv3-5, INPUT, DOWN);
> +		PIN_SLP(gpv3-6, INPUT, DOWN);
> +		PIN_SLP(gpv3-7, INPUT, DOWN);
> +
> +		PIN_SLP(gpv4-0, INPUT, DOWN);
> +		PIN_SLP(gpv4-1, INPUT, DOWN);
> +	};
> +};
> +
> +&pmu_system_controller {
> +	assigned-clocks = <&pmu_system_controller 0>;
> +	assigned-clock-parents =  <&clock CLK_XUSBXTI>;
> +};
> +
> +&rtc {
> +	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
> +	clock-names = "rtc", "rtc_src";
> +	status = "okay";
> +};
> +
> +&sdhci_2 {
> +	bus-width = <4>;
> +	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
> +	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd_irq>;
> +	pinctrl-names = "default";
> +	vmmc-supply = <&ldo21_reg>;
> +	status = "okay";
> +};
> +
> +&sdhci_3 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	non-removable;
> +	bus-width = <4>;
> +	mmc-pwrseq = <&wlan_pwrseq>;
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_wifi &wifi_host_wake>;
> +	status = "okay";
> +
> +	brcmf: wifi@1 {
> +		reg = <0x1>;
> +		compatible = "brcm,bcm4329-fmac";
> +		interrupt-parent = <&gpx2>;
> +		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "host-wake";
> +	};
> +};
> +
> +&serial_0 {
> +	pinctrl-0 = <&uart0_data &uart0_fctl>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	bluetooth {
> +		compatible = "brcm,bcm4330-bt";
> +		pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
> +		pinctrl-names = "default";
> +
> +		max-speed = <2000000>;
> +		shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>;
> +		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
> +		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
> +		clocks = <&max77686 MAX77686_CLK_PMIC>;
> +		clock-names = "lpo";
> +	};
Thanks for the above bluetooth device definition - also works nice on 
Midas boards family. :)
> +};
> +
> +&serial_1 {
> +	status = "okay";
> +};
> +
> +&serial_2 {
> +	pinctrl-0 = <&uart_sel>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
> +&serial_3 {
> +	status = "okay";
> +};
Do we really need serial_1 and serial_3? IMHO they should be also 
removed from Midas boards family.
> +
> +&tmu {
> +	status = "okay";
> +};

Best regards
Krzysztof Kozlowski Oct. 26, 2020, 2:48 p.m. UTC | #2
On Sat, Oct 24, 2020 at 04:44:18PM +0200, Martin Jücker wrote:
> The p4note family contains a couple of variants of the Galaxy Note 10.1
> tablet with mainly different modems. The GT-N8010/GT-N8013 is the wifi
> only version.
> 
> Signed-off-by: Martin Jücker <martin.juecker@gmail.com>
> ---
>  arch/arm/boot/dts/Makefile                    |    1 +
>  arch/arm/boot/dts/exynos4412-p4note-n801x.dts |   16 +
>  arch/arm/boot/dts/exynos4412-p4note.dtsi      | 1057 +++++++++++++++++
>  3 files changed, 1074 insertions(+)
>  create mode 100644 arch/arm/boot/dts/exynos4412-p4note-n801x.dts
>  create mode 100644 arch/arm/boot/dts/exynos4412-p4note.dtsi
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 4572db3fa5ae..b6d72bd7ebac 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -195,6 +195,7 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \
>  	exynos4412-odroidx.dtb \
>  	exynos4412-odroidx2.dtb \
>  	exynos4412-origen.dtb \
> +	exynos4412-p4note-n801x.dtb \
>  	exynos4412-smdk4412.dtb \
>  	exynos4412-tiny4412.dtb \
>  	exynos4412-trats2.dtb
> diff --git a/arch/arm/boot/dts/exynos4412-p4note-n801x.dts b/arch/arm/boot/dts/exynos4412-p4note-n801x.dts
> new file mode 100644
> index 000000000000..e7fb5b96e6c6
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos4412-p4note-n801x.dts
> @@ -0,0 +1,16 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Samsung's Galaxy Note 10.1 - N801x (wifi only version)
> + *
> + * Copyright (c) 2020 Martin Jücker <martin.juecker@gmail.com>
> + */
> +
> +/dts-v1/;
> +#include "exynos4412-p4note.dtsi"
> +
> +/ {
> +	model = "Samsung Galaxy Note 10.1 (GT-N8010/N8013) based on Exynos4412";
> +	compatible = "samsung,n801x", "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";

Compatible without the wildcard, so samsung,n8010.

> +
> +	/* this is the base variant without any kind of modem */
> +};
> diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
> new file mode 100644
> index 000000000000..6d7e84f40e92
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
> @@ -0,0 +1,1057 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Samsung's Exynos4412 based p4note device family base DT
> + *
> + * Copyright (c) 2020 Martin Jücker <martin.juecker@gmail.com>
> + */
> +
> +/dts-v1/;
> +#include "exynos4412.dtsi"
> +#include "exynos4412-ppmu-common.dtsi"
> +
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/gpio-keys.h>

Looks unused.

> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/clock/maxim,max77686.h>
> +#include <dt-bindings/pinctrl/samsung.h>
> +
> +/ {
> +	compatible = "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
> +
> +	memory@40000000 {
> +		device_type = "memory";
> +		reg = <0x40000000 0x80000000>;
> +	};
> +
> +	chosen {
> +		stdout-path = &serial_2;
> +	};
> +
> +	firmware@204f000 {
> +		compatible = "samsung,secure-firmware";
> +		reg = <0x0204F000 0x1000>;
> +	};
> +
> +	fixed-rate-clocks {
> +		xxti {
> +			compatible = "samsung,clock-xxti";
> +			clock-frequency = <0>;
> +		};
> +
> +		xusbxti {
> +			compatible = "samsung,clock-xusbxti";
> +			clock-frequency = <24000000>;
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&gpio_keys>;
> +
> +		key-down {
> +			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_VOLUMEDOWN>;
> +			label = "volume down";
> +			debounce-interval = <10>;
> +		};
> +
> +		key-up {
> +			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_VOLUMEUP>;
> +			label = "volume up";
> +			debounce-interval = <10>;
> +		};
> +
> +		key-power {
> +			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_POWER>;
> +			label = "power";
> +			debounce-interval = <10>;
> +			linux,can-disable;
> +			wakeup-source;
> +		};
> +	};
> +
> +	tsp_reg_1: voltage-regulator-1 {

All labels are not used.

> +		compatible = "regulator-fixed";
> +		regulator-name = "TSP_FIXED_VOLTAGES_1";

Would be better to have a real name matching either schematics (which I
guess you do not have) or vendor sources.

> +		pinctrl-names = "default";
> +		pinctrl-0 = <&tsp_reg_gpio_1>;
> +		gpios = <&gpm4 5 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		regulator-always-on;
> +	};
> +
> +	tsp_reg_2: voltage-regulator-2 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "TSP_FIXED_VOLTAGES_2";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&tsp_reg_gpio_2>;
> +		gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +		regulator-always-on;
> +	};
> +
> +	tsp_reg_3: voltage-regulator-3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "TSP_FIXED_VOLTAGES_3";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&tsp_reg_gpio_3>;
> +		gpios = <&gpb 7 GPIO_ACTIVE_HIGH>;
> +		startup-delay-us = <20000>;
> +		enable-active-high;
> +		regulator-always-on;
> +	};
> +
> +	wlan_pwrseq: sdhci3-pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +		reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>;
> +		pinctrl-0 = <&wifi_reset>;
> +		pinctrl-names = "default";
> +		clocks = <&max77686 MAX77686_CLK_PMIC>;
> +		clock-names = "ext_clock";
> +	};
> +
> +	i2c-gpio-10 {

Numbering should start from 1 unless there is a reason for 10/14/19?

> +		compatible = "i2c-gpio";
> +		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +		i2c-gpio,delay-us = <2>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ak8975@c {

Node name: magnetometer

> +			compatible = "asahi-kasei,ak8975";
> +			reg = <0x0c>;
> +			interrupt-parent = <&gpm4>;
> +			interrupts = <7 IRQ_TYPE_EDGE_RISING>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&ak8975_irq>;
> +		};
> +	};
> +
> +	i2c-gpio-14 {
> +		compatible = "i2c-gpio";
> +		sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +		scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +		i2c-gpio,delay-us = <2>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		max17042@36 {

Node name: fuel-gauge

> +			compatible = "maxim,max17042";
> +			reg = <0x36>;
> +			interrupt-parent = <&gpx2>;
> +			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;

You might need to disable the pull-down on the pin, whcih is usually the
default.

> +			maxim,rsns-microohm = <10000>;
> +			maxim,over-heat-temp = <600>;
> +			maxim,over-volt = <4300>;
> +		};
> +	};
> +
> +	i2c-gpio-19 {
> +		compatible = "i2c-gpio";
> +		sda-gpios = <&gpm4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +		scl-gpios = <&gpm4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +		i2c-gpio,delay-us = <5>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		stmpe_mfd@41 {

Node name: touchscreen?
Although you already have a touchscreen later, so what is it?

> +			compatible = "st,stmpe811";
> +			reg = <0x41>;
> +			interrupt-parent = <&gpx0>;
> +			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;

Disable the pull-down of interrupt pin?

> +			interrupt-controller;
> +			irq-trigger = <0x1>;
> +			st,adc-freq = <3>;
> +			st,mod-12b = <1>;
> +			st,ref-sel = <0>;
> +			st,sample-time = <3>;
> +
> +			stmpe_adc: stmpe_adc {

Node name: adc
Label seems unused, so remove it.

> +				compatible = "st,stmpe-adc";
> +				#io-channel-cells = <1>;
> +				st,norequest-mask = <0x2F>;
> +			};
> +		};
> +	};
> +};
> +
> +&adc {
> +	status = "okay";

Missing vdd-supply

> +};
> +
> +&bus_dmc {
> +	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
> +	vdd-supply = <&buck1_reg>;
> +	status = "okay";
> +};
> +
> +&bus_acp {
> +	devfreq = <&bus_dmc>;
> +	status = "okay";
> +};
> +
> +&bus_c2c {
> +	devfreq = <&bus_dmc>;
> +	status = "okay";
> +};
> +
> +&bus_leftbus {
> +	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
> +	vdd-supply = <&buck3_reg>;
> +	status = "okay";
> +};
> +
> +&bus_rightbus {
> +	devfreq = <&bus_leftbus>;
> +	status = "okay";
> +};
> +
> +&bus_display {
> +	devfreq = <&bus_leftbus>;
> +	status = "okay";
> +};
> +
> +&bus_fsys {
> +	devfreq = <&bus_leftbus>;
> +	status = "okay";
> +};
> +
> +&bus_peri {
> +	devfreq = <&bus_leftbus>;
> +	status = "okay";
> +};
> +
> +&bus_mfc {
> +	devfreq = <&bus_leftbus>;
> +	status = "okay";
> +};
> +
> +&cpu0 {
> +	cpu0-supply = <&buck2_reg>;
> +};
> +
> +&cpu_thermal {
> +	cooling-maps {
> +		map0 {
> +			/* Corresponds to 800MHz at freq_table */
> +			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, <&cpu2 7 7>, <&cpu3 7 7>;
> +		};
> +		map1 {
> +			/* Corresponds to 200MHz at freq_table */
> +			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>, <&cpu2 13 13>, <&cpu3 13 13>;
> +		};
> +	};
> +};
> +
> +&ehci {
> +	status = "okay";
> +};
> +
> +&exynos_usbphy {
> +	status = "okay";
> +};
> +
> +&fimd {
> +	pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	display-timings {
> +		timing0 {
> +			clock-frequency = <66666666>;
> +			hactive = <1280>;
> +			vactive = <800>;
> +			hfront-porch = <18>;
> +			hback-porch = <36>;
> +			hsync-len = <16>;
> +			vback-porch = <16>;
> +			vfront-porch = <4>;
> +			vsync-len = <3>;
> +			hsync-active = <1>;
> +		};
> +	};
> +};
> +
> +&gpu {
> +	mali-supply = <&buck4_reg>;
> +	status = "okay";
> +};
> +
> +&hsotg {
> +	vusb_a-supply = <&ldo12_reg>;
> +	dr_mode = "peripheral";
> +	status = "okay";
> +};
> +
> +&i2c_3 {
> +	samsung,i2c-sda-delay = <100>;
> +	samsung,i2c-slave-addr = <0x10>;
> +	samsung,i2c-max-bus-freq = <400000>;
> +	pinctrl-0 = <&i2c3_bus>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	touchscreen@4a {
> +		compatible = "atmel,maxtouch";
> +		reg = <0x4a>;
> +		reset-gpios = <&gpm0 4 GPIO_ACTIVE_HIGH>;
> +		interrupt-parent = <&gpm2>;
> +		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> +		pinctrl-0 = <&tsp_rst &tsp_irq>;
> +		pinctrl-names = "default";
> +	};
> +};
> +
> +&i2c_7 {
> +	samsung,i2c-sda-delay = <100>;
> +	samsung,i2c-slave-addr = <0x10>;
> +	samsung,i2c-max-bus-freq = <400000>;
> +	pinctrl-0 = <&i2c7_bus>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	max77686: max77686_pmic@9 {
> +		compatible = "maxim,max77686";
> +		interrupt-parent = <&gpx0>;
> +		interrupts = <7 IRQ_TYPE_NONE>;
> +		pinctrl-0 = <&max77686_irq>;
> +		pinctrl-names = "default";
> +		reg = <0x09>;
> +		#clock-cells = <1>;
> +
> +		voltage-regulators {

Just "regulators" and no empty line after this.

You should define all regulators here. If some are unknown, keep the
min-max the same as in driver.

> +
> +			/* WM8994 audio */
> +			ldo3_reg: LDO3 {
> +				regulator-name = "VCC_1.8V_AP";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +				};
> +			};
> +
> +			/* Unknown */
> +			ldo5_reg: LDO5 {
> +				regulator-name = "VCC_1.8V_IO";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			/* CSI IP block */
> +			ldo8_reg: LDO8 {
> +				regulator-name = "VMIPI_1.0V";
> +				regulator-min-microvolt = <1000000>;
> +				regulator-max-microvolt = <1000000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +				};
> +			};
> +
> +			/* IR LED on/off */
> +			ldo9_reg: LDO9 {
> +				regulator-name = "VLED_IC_1.9V";
> +				regulator-min-microvolt = <1950000>;
> +				regulator-max-microvolt = <1950000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			/* CSI IP block */
> +			ldo10_reg: LDO10 {
> +				regulator-name = "VMIPI_1.8V";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +				};
> +			};
> +
> +			/* Unknown */
> +			ldo11_reg: LDO11 {
> +				regulator-name = "VABB1_1.9V";
> +				regulator-min-microvolt = <1950000>;
> +				regulator-max-microvolt = <1950000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			/* USB OTG */
> +			ldo12_reg: LDO12 {
> +				regulator-name = "VUOTG_3.0V";
> +				regulator-min-microvolt = <3000000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +				};
> +			};
> +
> +			/* Unknown */
> +			ldo14_reg: LDO14 {
> +				regulator-name = "VABB2_1.9V";
> +				regulator-min-microvolt = <1950000>;
> +				regulator-max-microvolt = <1950000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			/* Camera ISX012 */
> +			ldo18_reg: LDO18 {
> +				regulator-name = "CAM_IO_1.8V";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			/* Camera S5K6A3 */
> +			ldo19_reg: LDO19 {
> +				regulator-name = "VT_CORE_1.8V";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			/* MMC2 */
> +			ldo21_reg: LDO21 {
> +				regulator-name = "VTF_2.8V";
> +				regulator-min-microvolt = <2800000>;
> +				regulator-max-microvolt = <2800000>;
> +				maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
> +			};
> +
> +			/* ADC */
> +			ldo23_reg: LDO23 {
> +				regulator-name = "VDD_ADC_3.3V";
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			/* Camera S5K6A3 */
> +			ldo24_reg: LDO24 {
> +				regulator-name = "CAM_A2.8V";
> +				regulator-min-microvolt = <2800000>;
> +				regulator-max-microvolt = <2800000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			/* IR LED sending */
> +			ldo25_reg: LDO25 {
> +				regulator-name = "VLED_3.3V";
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			/* Camera ISX012 */
> +			ldo26_reg: LDO26 {
> +				regulator-name = "3MP_AF_2.8V";
> +				regulator-min-microvolt = <2800000>;
> +				regulator-max-microvolt = <2800000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			buck1_reg: BUCK1 {
> +				regulator-name = "VDD_MIF";
> +				regulator-min-microvolt = <850000>;
> +				regulator-max-microvolt = <1050000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			buck2_reg: BUCK2 {
> +				regulator-name = "VDD_ARM";
> +				regulator-min-microvolt = <850000>;
> +				regulator-max-microvolt = <1500000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			buck3_reg: BUCK3 {
> +				regulator-name = "VDD_INT";
> +				regulator-min-microvolt = <850000>;
> +				regulator-max-microvolt = <1100000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +			};
> +
> +			buck4_reg: BUCK4 {
> +				regulator-name = "VDD_G3D";
> +				regulator-min-microvolt = <850000>;
> +				regulator-max-microvolt = <1075000>;
> +				regulator-boot-on;
> +			};
> +
> +			buck9_reg: BUCK9 {
> +				regulator-name = "3MP_CORE_1.2V";
> +				regulator-min-microvolt = <1200000>;
> +				regulator-max-microvolt = <1200000>;

Empty line to match the other nodes.

> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&mshc_0 {
> +	broken-cd;
> +	non-removable;
> +	card-detect-delay = <200>;
> +	clock-frequency = <400000000>;
> +	samsung,dw-mshc-ciu-div = <0>;
> +	samsung,dw-mshc-sdr-timing = <2 3>;
> +	samsung,dw-mshc-ddr-timing = <1 2>;
> +	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
> +	pinctrl-names = "default";
> +	bus-width = <4>;
> +	cap-mmc-highspeed;
> +	cap-sd-highspeed;
> +	status = "okay";
> +};
> +
> +&pinctrl_0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sleep0>;
> +
> +	tsp_reg_gpio_2: tsp-reg-gpio-2 {
> +		samsung,pins = "gpb-5";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> +	};
> +
> +	tsp_reg_gpio_3: tsp-reg-gpio-3 {
> +		samsung,pins = "gpb-7";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> +	};
> +
> +	sleep0: sleep-states {
> +		PIN_SLP(gpa0-0, INPUT, NONE);
> +		PIN_SLP(gpa0-1, OUT0, NONE);
> +		PIN_SLP(gpa0-2, INPUT, NONE);
> +		PIN_SLP(gpa0-3, INPUT, UP);
> +		PIN_SLP(gpa0-4, INPUT, NONE);
> +		PIN_SLP(gpa0-5, INPUT, DOWN);
> +		PIN_SLP(gpa0-6, INPUT, DOWN);
> +		PIN_SLP(gpa0-7, INPUT, UP);
> +
> +		PIN_SLP(gpa1-0, INPUT, DOWN);
> +		PIN_SLP(gpa1-1, INPUT, DOWN);
> +		PIN_SLP(gpa1-2, INPUT, DOWN);
> +		PIN_SLP(gpa1-3, INPUT, DOWN);
> +		PIN_SLP(gpa1-4, INPUT, DOWN);
> +		PIN_SLP(gpa1-5, INPUT, DOWN);
> +
> +		PIN_SLP(gpb-0, INPUT, NONE);
> +		PIN_SLP(gpb-1, INPUT, NONE);
> +		PIN_SLP(gpb-2, INPUT, NONE);
> +		PIN_SLP(gpb-3, INPUT, NONE);
> +		PIN_SLP(gpb-4, INPUT, DOWN);
> +		PIN_SLP(gpb-5, INPUT, DOWN);
> +		PIN_SLP(gpb-6, INPUT, DOWN);
> +		PIN_SLP(gpb-7, INPUT, DOWN);
> +
> +		PIN_SLP(gpc0-0, INPUT, DOWN);
> +		PIN_SLP(gpc0-1, INPUT, DOWN);
> +		PIN_SLP(gpc0-2, INPUT, DOWN);
> +		PIN_SLP(gpc0-3, INPUT, DOWN);
> +		PIN_SLP(gpc0-4, INPUT, DOWN);
> +
> +		PIN_SLP(gpc1-0, INPUT, UP);
> +		PIN_SLP(gpc1-1, PREV, NONE);
> +		PIN_SLP(gpc1-2, INPUT, UP);
> +		PIN_SLP(gpc1-3, INPUT, UP);
> +		PIN_SLP(gpc1-4, INPUT, UP);
> +
> +		PIN_SLP(gpd0-0, INPUT, DOWN);
> +		PIN_SLP(gpd0-1, OUT0, NONE);
> +		PIN_SLP(gpd0-2, INPUT, NONE);
> +		PIN_SLP(gpd0-3, INPUT, NONE);
> +
> +		PIN_SLP(gpd1-0, INPUT, DOWN);
> +		PIN_SLP(gpd1-1, INPUT, DOWN);
> +		PIN_SLP(gpd1-2, INPUT, NONE);
> +		PIN_SLP(gpd1-3, INPUT, NONE);
> +
> +		PIN_SLP(gpf0-0, OUT0, NONE);
> +		PIN_SLP(gpf0-1, OUT0, NONE);
> +		PIN_SLP(gpf0-2, OUT0, NONE);
> +		PIN_SLP(gpf0-3, OUT0, NONE);
> +		PIN_SLP(gpf0-4, OUT0, NONE);
> +		PIN_SLP(gpf0-5, OUT0, NONE);
> +		PIN_SLP(gpf0-6, OUT0, NONE);
> +		PIN_SLP(gpf0-7, OUT0, NONE);
> +
> +		PIN_SLP(gpf1-0, OUT0, NONE);
> +		PIN_SLP(gpf1-1, OUT0, NONE);
> +		PIN_SLP(gpf1-2, OUT0, NONE);
> +		PIN_SLP(gpf1-3, OUT0, NONE);
> +		PIN_SLP(gpf1-4, OUT0, NONE);
> +		PIN_SLP(gpf1-5, OUT0, NONE);
> +		PIN_SLP(gpf1-6, OUT0, NONE);
> +		PIN_SLP(gpf1-7, OUT0, NONE);
> +
> +		PIN_SLP(gpf2-0, OUT0, NONE);
> +		PIN_SLP(gpf2-1, OUT0, NONE);
> +		PIN_SLP(gpf2-2, OUT0, NONE);
> +		PIN_SLP(gpf2-3, OUT0, NONE);
> +		PIN_SLP(gpf2-4, OUT0, NONE);
> +		PIN_SLP(gpf2-5, OUT0, NONE);
> +		PIN_SLP(gpf2-6, OUT0, NONE);
> +		PIN_SLP(gpf2-7, OUT0, NONE);
> +
> +		PIN_SLP(gpf3-0, OUT0, NONE);
> +		PIN_SLP(gpf3-1, OUT0, NONE);
> +		PIN_SLP(gpf3-2, OUT0, NONE);
> +		PIN_SLP(gpf3-3, OUT0, NONE);
> +		PIN_SLP(gpf3-4, OUT0, NONE);
> +		PIN_SLP(gpf3-5, OUT0, NONE);
> +
> +		PIN_SLP(gpj0-0, INPUT, DOWN);
> +		PIN_SLP(gpj0-1, INPUT, DOWN);
> +		PIN_SLP(gpj0-2, INPUT, DOWN);
> +		PIN_SLP(gpj0-3, PREV, NONE);
> +		PIN_SLP(gpj0-4, PREV, NONE);
> +		PIN_SLP(gpj0-5, OUT0, NONE);
> +		PIN_SLP(gpj0-6, OUT0, NONE);
> +		PIN_SLP(gpj0-7, OUT0, NONE);
> +
> +		PIN_SLP(gpj1-0, OUT0, NONE);
> +		PIN_SLP(gpj1-1, INPUT, DOWN);
> +		PIN_SLP(gpj1-2, PREV, NONE);
> +		PIN_SLP(gpj1-3, OUT0, NONE);
> +	};
> +};
> +
> +&pinctrl_1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sleep1>;
> +
> +	uart_sel: uart-sel {
> +		samsung,pins = "gpl2-7";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> +		samsung,pin-val = <1>;
> +		/* 0 = CP, 1 = AP (serial output) */
> +	};
> +
> +	gpio_keys: gpio-keys {
> +		samsung,pins = "gpx2-2", "gpx2-7", "gpx3-3";
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> +	};
> +
> +	wifi_host_wake: wifi-host-wake {
> +		samsung,pins = "gpx2-5";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> +	};
> +
> +	bt_shutdown: bt-shutdown {
> +		samsung,pins = "gpl0-6";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> +		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> +		samsung,pin-val = <1>;
> +	};
> +
> +	bt_device_wakeup: bt-device-wakeup {
> +		samsung,pins = "gpx3-1";

Please order the nodes in pinctrl by pins (first entry), so:

sd3-wifi {
	samsung,pins = "gpk3-3",  ...
}
...
bt-shutdown {
	samsung,pins = "gpl0-6";
}
...
gpx0
gpx2
gpx3

etc.


Best regards,
Krzysztof
Krzysztof Kozlowski Oct. 26, 2020, 4 p.m. UTC | #3
On Mon, Oct 26, 2020 at 03:48:30PM +0100, Krzysztof Kozlowski wrote:
> On Sat, Oct 24, 2020 at 04:44:18PM +0200, Martin Jücker wrote:

(...)

> > +&i2c_7 {
> > +	samsung,i2c-sda-delay = <100>;
> > +	samsung,i2c-slave-addr = <0x10>;
> > +	samsung,i2c-max-bus-freq = <400000>;
> > +	pinctrl-0 = <&i2c7_bus>;
> > +	pinctrl-names = "default";
> > +	status = "okay";
> > +
> > +	max77686: max77686_pmic@9 {
> > +		compatible = "maxim,max77686";
> > +		interrupt-parent = <&gpx0>;
> > +		interrupts = <7 IRQ_TYPE_NONE>;
> > +		pinctrl-0 = <&max77686_irq>;
> > +		pinctrl-names = "default";
> > +		reg = <0x09>;
> > +		#clock-cells = <1>;
> > +
> > +		voltage-regulators {
> 
> Just "regulators" and no empty line after this.

Skip this comment, it's obviously wrong, as the regulator driver and
bindings require the exact name "voltage-regulator".

Best regards,
Krzysztof
Martin Jücker Oct. 26, 2020, 11:27 p.m. UTC | #4
Hello Krzysztof,

thank you for the feedback.

On Mon, Oct 26, 2020 at 03:48:30PM +0100, Krzysztof Kozlowski wrote:
> On Sat, Oct 24, 2020 at 04:44:18PM +0200, Martin Jücker wrote:

(...)

> > +/dts-v1/;
> > +#include "exynos4412-p4note.dtsi"
> > +
> > +/ {
> > +	model = "Samsung Galaxy Note 10.1 (GT-N8010/N8013) based on Exynos4412";
> > +	compatible = "samsung,n801x", "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
> 
> Compatible without the wildcard, so samsung,n8010.

I went with the n710x style compatible but I'm fine with this, too.

> 
> > +
> > +	/* this is the base variant without any kind of modem */
> > +};
> > diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
> > new file mode 100644
> > index 000000000000..6d7e84f40e92
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
> > @@ -0,0 +1,1057 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Samsung's Exynos4412 based p4note device family base DT
> > + *
> > + * Copyright (c) 2020 Martin Jücker <martin.juecker@gmail.com>
> > + */
> > +
> > +/dts-v1/;
> > +#include "exynos4412.dtsi"
> > +#include "exynos4412-ppmu-common.dtsi"
> > +
> > +#include <dt-bindings/input/input.h>
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/input/gpio-keys.h>
> 
> Looks unused.

Indeed, a leftover while trying things.

(...)

>
> > +	tsp_reg_1: voltage-regulator-1 {
> 
> All labels are not used.
>

Removed the labels.

> > +		compatible = "regulator-fixed";
> > +		regulator-name = "TSP_FIXED_VOLTAGES_1";
> 
> Would be better to have a real name matching either schematics (which I
> guess you do not have) or vendor sources.
> 

You are right, there is no schematics, the old vendor sources only have
gpio calls with the names TSP_LDO_ON, TSP_LDO_ON1 and TSP_LDO_ON2. Those
regulators are for the Atmel 1664S touchscreen which has a public data
sheet. My best guess would be that those are VDD, AVDD and XVDD but I
have no idea how to match them or whether this is actually an accurate
observation. My electronics knowledge is rather limited.

> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&tsp_reg_gpio_1>;
> > +		gpios = <&gpm4 5 GPIO_ACTIVE_HIGH>;
> > +		enable-active-high;
> > +		regulator-always-on;
> > +	};
> > +
> > +	tsp_reg_2: voltage-regulator-2 {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "TSP_FIXED_VOLTAGES_2";
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&tsp_reg_gpio_2>;
> > +		gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
> > +		enable-active-high;
> > +		regulator-always-on;
> > +	};
> > +
> > +	tsp_reg_3: voltage-regulator-3 {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "TSP_FIXED_VOLTAGES_3";
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&tsp_reg_gpio_3>;
> > +		gpios = <&gpb 7 GPIO_ACTIVE_HIGH>;
> > +		startup-delay-us = <20000>;
> > +		enable-active-high;
> > +		regulator-always-on;
> > +	};
> > +
> > +	wlan_pwrseq: sdhci3-pwrseq {
> > +		compatible = "mmc-pwrseq-simple";
> > +		reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>;
> > +		pinctrl-0 = <&wifi_reset>;
> > +		pinctrl-names = "default";
> > +		clocks = <&max77686 MAX77686_CLK_PMIC>;
> > +		clock-names = "ext_clock";
> > +	};
> > +
> > +	i2c-gpio-10 {
> 
> Numbering should start from 1 unless there is a reason for 10/14/19?
> 

I used the numbers from the vendor sources but it shouldn't really
matter, changed it.

> > +		compatible = "i2c-gpio";
> > +		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> > +		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> > +		i2c-gpio,delay-us = <2>;
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		ak8975@c {
> 
> Node name: magnetometer
> 

Done.

> > +			compatible = "asahi-kasei,ak8975";
> > +			reg = <0x0c>;
> > +			interrupt-parent = <&gpm4>;
> > +			interrupts = <7 IRQ_TYPE_EDGE_RISING>;
> > +			pinctrl-names = "default";
> > +			pinctrl-0 = <&ak8975_irq>;
> > +		};
> > +	};
> > +
> > +	i2c-gpio-14 {
> > +		compatible = "i2c-gpio";
> > +		sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> > +		scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> > +		i2c-gpio,delay-us = <2>;
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		max17042@36 {
> 
> Node name: fuel-gauge
> 

Done.

> > +			compatible = "maxim,max17042";
> > +			reg = <0x36>;
> > +			interrupt-parent = <&gpx2>;
> > +			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
> 
> You might need to disable the pull-down on the pin, whcih is usually the
> default.
> 

Found the configuration for this in the vendor sources, it was in a
different place than the rest.

> > +			maxim,rsns-microohm = <10000>;
> > +			maxim,over-heat-temp = <600>;
> > +			maxim,over-volt = <4300>;
> > +		};
> > +	};
> > +
> > +	i2c-gpio-19 {
> > +		compatible = "i2c-gpio";
> > +		sda-gpios = <&gpm4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> > +		scl-gpios = <&gpm4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> > +		i2c-gpio,delay-us = <5>;
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		stmpe_mfd@41 {
> 
> Node name: touchscreen?
> Although you already have a touchscreen later, so what is it?
> 

The stmpe 811 is a mfd but the p4note is actually only using the adc
part of it for checking the accessory type of the usb cable and what was
connected to the headphone jack. I renamed it to adc@41

> > +			compatible = "st,stmpe811";
> > +			reg = <0x41>;
> > +			interrupt-parent = <&gpx0>;
> > +			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
> 
> Disable the pull-down of interrupt pin?
> 

Same as above.

> > +			interrupt-controller;
> > +			irq-trigger = <0x1>;
> > +			st,adc-freq = <3>;
> > +			st,mod-12b = <1>;
> > +			st,ref-sel = <0>;
> > +			st,sample-time = <3>;
> > +
> > +			stmpe_adc: stmpe_adc {
> 
> Node name: adc
> Label seems unused, so remove it.
> 

I removed the label but I cannot rename the node as the name is used by
the driver to find and load the driver for the subcomponent.

> > +				compatible = "st,stmpe-adc";
> > +				#io-channel-cells = <1>;
> > +				st,norequest-mask = <0x2F>;
> > +			};
> > +		};
> > +	};
> > +};
> > +
> > +&adc {
> > +	status = "okay";
> 
> Missing vdd-supply
> 

I'm not sure about the supply here, it's not actually in the vendor
sources. It seems the bootloader is setting this up. The regulator
naming suggests, that it would be LDO23. What should I do here?
Currently no driver is using it but it's needed for the backlight
dimming which I currently still have some trouble with.

> > +};

(...)

> > +
> > +&i2c_7 {
> > +	samsung,i2c-sda-delay = <100>;
> > +	samsung,i2c-slave-addr = <0x10>;
> > +	samsung,i2c-max-bus-freq = <400000>;
> > +	pinctrl-0 = <&i2c7_bus>;
> > +	pinctrl-names = "default";
> > +	status = "okay";
> > +
> > +	max77686: max77686_pmic@9 {
> > +		compatible = "maxim,max77686";
> > +		interrupt-parent = <&gpx0>;
> > +		interrupts = <7 IRQ_TYPE_NONE>;
> > +		pinctrl-0 = <&max77686_irq>;
> > +		pinctrl-names = "default";
> > +		reg = <0x09>;
> > +		#clock-cells = <1>;
> > +
> > +		voltage-regulators {
> 
> Just "regulators" and no empty line after this.
> 
> You should define all regulators here. If some are unknown, keep the
> min-max the same as in driver.
> 

I used the driver to read all the voltages, it also reads values for
the LDOs that are not defined in the DT, so I have values for all of
them setup by the bootloader. What I don't know is their name and what
they are used for. Interestingly apart from two LDOs, the voltages did
match exactly with those from the midas DT, so it could be very
similar. The two non-matching were only off by 0.1V. How should I go
about this?

> > +
> > +			/* WM8994 audio */
> > +			ldo3_reg: LDO3 {
> > +				regulator-name = "VCC_1.8V_AP";
> > +				regulator-min-microvolt = <1800000>;
> > +				regulator-max-microvolt = <1800000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +				};
> > +			};
> > +
> > +			/* Unknown */
> > +			ldo5_reg: LDO5 {
> > +				regulator-name = "VCC_1.8V_IO";
> > +				regulator-min-microvolt = <1800000>;
> > +				regulator-max-microvolt = <1800000>;
> > +
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			/* CSI IP block */
> > +			ldo8_reg: LDO8 {
> > +				regulator-name = "VMIPI_1.0V";
> > +				regulator-min-microvolt = <1000000>;
> > +				regulator-max-microvolt = <1000000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +				};
> > +			};
> > +
> > +			/* IR LED on/off */
> > +			ldo9_reg: LDO9 {
> > +				regulator-name = "VLED_IC_1.9V";
> > +				regulator-min-microvolt = <1950000>;
> > +				regulator-max-microvolt = <1950000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			/* CSI IP block */
> > +			ldo10_reg: LDO10 {
> > +				regulator-name = "VMIPI_1.8V";
> > +				regulator-min-microvolt = <1800000>;
> > +				regulator-max-microvolt = <1800000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +				};
> > +			};
> > +
> > +			/* Unknown */
> > +			ldo11_reg: LDO11 {
> > +				regulator-name = "VABB1_1.9V";
> > +				regulator-min-microvolt = <1950000>;
> > +				regulator-max-microvolt = <1950000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			/* USB OTG */
> > +			ldo12_reg: LDO12 {
> > +				regulator-name = "VUOTG_3.0V";
> > +				regulator-min-microvolt = <3000000>;
> > +				regulator-max-microvolt = <3000000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +				};
> > +			};
> > +
> > +			/* Unknown */
> > +			ldo14_reg: LDO14 {
> > +				regulator-name = "VABB2_1.9V";
> > +				regulator-min-microvolt = <1950000>;
> > +				regulator-max-microvolt = <1950000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			/* Camera ISX012 */
> > +			ldo18_reg: LDO18 {
> > +				regulator-name = "CAM_IO_1.8V";
> > +				regulator-min-microvolt = <1800000>;
> > +				regulator-max-microvolt = <1800000>;
> > +
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			/* Camera S5K6A3 */
> > +			ldo19_reg: LDO19 {
> > +				regulator-name = "VT_CORE_1.8V";
> > +				regulator-min-microvolt = <1800000>;
> > +				regulator-max-microvolt = <1800000>;
> > +
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			/* MMC2 */
> > +			ldo21_reg: LDO21 {
> > +				regulator-name = "VTF_2.8V";
> > +				regulator-min-microvolt = <2800000>;
> > +				regulator-max-microvolt = <2800000>;
> > +				maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
> > +			};
> > +
> > +			/* ADC */
> > +			ldo23_reg: LDO23 {
> > +				regulator-name = "VDD_ADC_3.3V";
> > +				regulator-min-microvolt = <3300000>;
> > +				regulator-max-microvolt = <3300000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			/* Camera S5K6A3 */
> > +			ldo24_reg: LDO24 {
> > +				regulator-name = "CAM_A2.8V";
> > +				regulator-min-microvolt = <2800000>;
> > +				regulator-max-microvolt = <2800000>;
> > +
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			/* IR LED sending */
> > +			ldo25_reg: LDO25 {
> > +				regulator-name = "VLED_3.3V";
> > +				regulator-min-microvolt = <3300000>;
> > +				regulator-max-microvolt = <3300000>;
> > +
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			/* Camera ISX012 */
> > +			ldo26_reg: LDO26 {
> > +				regulator-name = "3MP_AF_2.8V";
> > +				regulator-min-microvolt = <2800000>;
> > +				regulator-max-microvolt = <2800000>;
> > +
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +
> > +			buck1_reg: BUCK1 {
> > +				regulator-name = "VDD_MIF";
> > +				regulator-min-microvolt = <850000>;
> > +				regulator-max-microvolt = <1050000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +			};
> > +
> > +			buck2_reg: BUCK2 {
> > +				regulator-name = "VDD_ARM";
> > +				regulator-min-microvolt = <850000>;
> > +				regulator-max-microvolt = <1500000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +			};
> > +
> > +			buck3_reg: BUCK3 {
> > +				regulator-name = "VDD_INT";
> > +				regulator-min-microvolt = <850000>;
> > +				regulator-max-microvolt = <1100000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +			};
> > +
> > +			buck4_reg: BUCK4 {
> > +				regulator-name = "VDD_G3D";
> > +				regulator-min-microvolt = <850000>;
> > +				regulator-max-microvolt = <1075000>;
> > +				regulator-boot-on;
> > +			};
> > +
> > +			buck9_reg: BUCK9 {
> > +				regulator-name = "3MP_CORE_1.2V";
> > +				regulator-min-microvolt = <1200000>;
> > +				regulator-max-microvolt = <1200000>;
> 
> Empty line to match the other nodes.
> 

Done.

> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +				};
> > +			};
> > +		};
> > +	};
> > +};
> > +

(...)

> > +
> > +&pinctrl_1 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&sleep1>;
> > +
> > +	uart_sel: uart-sel {
> > +		samsung,pins = "gpl2-7";
> > +		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> > +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> > +		samsung,pin-val = <1>;
> > +		/* 0 = CP, 1 = AP (serial output) */
> > +	};
> > +
> > +	gpio_keys: gpio-keys {
> > +		samsung,pins = "gpx2-2", "gpx2-7", "gpx3-3";
> > +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> > +	};
> > +
> > +	wifi_host_wake: wifi-host-wake {
> > +		samsung,pins = "gpx2-5";
> > +		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
> > +		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
> > +	};
> > +
> > +	bt_shutdown: bt-shutdown {
> > +		samsung,pins = "gpl0-6";
> > +		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> > +		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> > +		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> > +		samsung,pin-val = <1>;
> > +	};
> > +
> > +	bt_device_wakeup: bt-device-wakeup {
> > +		samsung,pins = "gpx3-1";
> 
> Please order the nodes in pinctrl by pins (first entry), so:
> 
> sd3-wifi {
> 	samsung,pins = "gpk3-3",  ...
> }
> ...
> bt-shutdown {
> 	samsung,pins = "gpl0-6";
> }
> ...
> gpx0
> gpx2
> gpx3
> 
> etc.
> 

Done.

> 
> Best regards,
> Krzysztof

Cheers
Martin
Krzysztof Kozlowski Oct. 27, 2020, 8:17 a.m. UTC | #5
On Tue, Oct 27, 2020 at 12:27:09AM +0100, Martin Juecker wrote:
> Hello Krzysztof,
> 
> thank you for the feedback.
> 
> On Mon, Oct 26, 2020 at 03:48:30PM +0100, Krzysztof Kozlowski wrote:
> > On Sat, Oct 24, 2020 at 04:44:18PM +0200, Martin Jücker wrote:
> 
> (...)
> 
> > > +/dts-v1/;
> > > +#include "exynos4412-p4note.dtsi"
> > > +
> > > +/ {
> > > +	model = "Samsung Galaxy Note 10.1 (GT-N8010/N8013) based on Exynos4412";
> > > +	compatible = "samsung,n801x", "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
> > 
> > Compatible without the wildcard, so samsung,n8010.
> 
> I went with the n710x style compatible but I'm fine with this, too.
> 
> > 
> > > +
> > > +	/* this is the base variant without any kind of modem */
> > > +};
> > > diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
> > > new file mode 100644
> > > index 000000000000..6d7e84f40e92
> > > --- /dev/null
> > > +++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
> > > @@ -0,0 +1,1057 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * Samsung's Exynos4412 based p4note device family base DT
> > > + *
> > > + * Copyright (c) 2020 Martin Jücker <martin.juecker@gmail.com>
> > > + */
> > > +
> > > +/dts-v1/;
> > > +#include "exynos4412.dtsi"
> > > +#include "exynos4412-ppmu-common.dtsi"
> > > +
> > > +#include <dt-bindings/input/input.h>
> > > +#include <dt-bindings/gpio/gpio.h>
> > > +#include <dt-bindings/input/gpio-keys.h>
> > 
> > Looks unused.
> 
> Indeed, a leftover while trying things.
> 
> (...)
> 
> >
> > > +	tsp_reg_1: voltage-regulator-1 {
> > 
> > All labels are not used.
> >
> 
> Removed the labels.
> 
> > > +		compatible = "regulator-fixed";
> > > +		regulator-name = "TSP_FIXED_VOLTAGES_1";
> > 
> > Would be better to have a real name matching either schematics (which I
> > guess you do not have) or vendor sources.
> > 
> 
> You are right, there is no schematics, the old vendor sources only have
> gpio calls with the names TSP_LDO_ON, TSP_LDO_ON1 and TSP_LDO_ON2. Those
> regulators are for the Atmel 1664S touchscreen which has a public data
> sheet. My best guess would be that those are VDD, AVDD and XVDD but I
> have no idea how to match them or whether this is actually an accurate
> observation. My electronics knowledge is rather limited.

Then how about TSP_LDO1, TSP_LDO2, TSP_LDO3?

> > > +		pinctrl-names = "default";
> > > +		pinctrl-0 = <&tsp_reg_gpio_1>;
> > > +		gpios = <&gpm4 5 GPIO_ACTIVE_HIGH>;
> > > +		enable-active-high;
> > > +		regulator-always-on;
> > > +	};
> > > +
> > > +	tsp_reg_2: voltage-regulator-2 {
> > > +		compatible = "regulator-fixed";
> > > +		regulator-name = "TSP_FIXED_VOLTAGES_2";
> > > +		pinctrl-names = "default";
> > > +		pinctrl-0 = <&tsp_reg_gpio_2>;
> > > +		gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
> > > +		enable-active-high;
> > > +		regulator-always-on;
> > > +	};
> > > +
> > > +	tsp_reg_3: voltage-regulator-3 {
> > > +		compatible = "regulator-fixed";
> > > +		regulator-name = "TSP_FIXED_VOLTAGES_3";
> > > +		pinctrl-names = "default";
> > > +		pinctrl-0 = <&tsp_reg_gpio_3>;
> > > +		gpios = <&gpb 7 GPIO_ACTIVE_HIGH>;
> > > +		startup-delay-us = <20000>;
> > > +		enable-active-high;
> > > +		regulator-always-on;
> > > +	};
> > > +
> > > +	wlan_pwrseq: sdhci3-pwrseq {
> > > +		compatible = "mmc-pwrseq-simple";
> > > +		reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>;
> > > +		pinctrl-0 = <&wifi_reset>;
> > > +		pinctrl-names = "default";
> > > +		clocks = <&max77686 MAX77686_CLK_PMIC>;
> > > +		clock-names = "ext_clock";
> > > +	};
> > > +
> > > +	i2c-gpio-10 {
> > 
> > Numbering should start from 1 unless there is a reason for 10/14/19?
> > 
> 
> I used the numbers from the vendor sources but it shouldn't really
> matter, changed it.
> 
> > > +		compatible = "i2c-gpio";
> > > +		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> > > +		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> > > +		i2c-gpio,delay-us = <2>;
> > > +		#address-cells = <1>;
> > > +		#size-cells = <0>;
> > > +
> > > +		ak8975@c {
> > 
> > Node name: magnetometer
> > 
> 
> Done.
> 
> > > +			compatible = "asahi-kasei,ak8975";
> > > +			reg = <0x0c>;
> > > +			interrupt-parent = <&gpm4>;
> > > +			interrupts = <7 IRQ_TYPE_EDGE_RISING>;
> > > +			pinctrl-names = "default";
> > > +			pinctrl-0 = <&ak8975_irq>;
> > > +		};
> > > +	};
> > > +
> > > +	i2c-gpio-14 {
> > > +		compatible = "i2c-gpio";
> > > +		sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> > > +		scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> > > +		i2c-gpio,delay-us = <2>;
> > > +		#address-cells = <1>;
> > > +		#size-cells = <0>;
> > > +
> > > +		max17042@36 {
> > 
> > Node name: fuel-gauge
> > 
> 
> Done.
> 
> > > +			compatible = "maxim,max17042";
> > > +			reg = <0x36>;
> > > +			interrupt-parent = <&gpx2>;
> > > +			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
> > 
> > You might need to disable the pull-down on the pin, whcih is usually the
> > default.
> > 
> 
> Found the configuration for this in the vendor sources, it was in a
> different place than the rest.
> 
> > > +			maxim,rsns-microohm = <10000>;
> > > +			maxim,over-heat-temp = <600>;
> > > +			maxim,over-volt = <4300>;
> > > +		};
> > > +	};
> > > +
> > > +	i2c-gpio-19 {
> > > +		compatible = "i2c-gpio";
> > > +		sda-gpios = <&gpm4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> > > +		scl-gpios = <&gpm4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> > > +		i2c-gpio,delay-us = <5>;
> > > +		#address-cells = <1>;
> > > +		#size-cells = <0>;
> > > +
> > > +		stmpe_mfd@41 {
> > 
> > Node name: touchscreen?
> > Although you already have a touchscreen later, so what is it?
> > 
> 
> The stmpe 811 is a mfd but the p4note is actually only using the adc
> part of it for checking the accessory type of the usb cable and what was
> connected to the headphone jack. I renamed it to adc@41
> 
> > > +			compatible = "st,stmpe811";
> > > +			reg = <0x41>;
> > > +			interrupt-parent = <&gpx0>;
> > > +			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
> > 
> > Disable the pull-down of interrupt pin?
> > 
> 
> Same as above.
> 
> > > +			interrupt-controller;
> > > +			irq-trigger = <0x1>;
> > > +			st,adc-freq = <3>;
> > > +			st,mod-12b = <1>;
> > > +			st,ref-sel = <0>;
> > > +			st,sample-time = <3>;
> > > +
> > > +			stmpe_adc: stmpe_adc {
> > 
> > Node name: adc
> > Label seems unused, so remove it.
> > 
> 
> I removed the label but I cannot rename the node as the name is used by
> the driver to find and load the driver for the subcomponent.

Ok.

> 
> > > +				compatible = "st,stmpe-adc";
> > > +				#io-channel-cells = <1>;
> > > +				st,norequest-mask = <0x2F>;
> > > +			};
> > > +		};
> > > +	};
> > > +};
> > > +
> > > +&adc {
> > > +	status = "okay";
> > 
> > Missing vdd-supply
> > 
> 
> I'm not sure about the supply here, it's not actually in the vendor
> sources. It seems the bootloader is setting this up. The regulator
> naming suggests, that it would be LDO23. What should I do here?
> Currently no driver is using it but it's needed for the backlight
> dimming which I currently still have some trouble with.

The LDO23 is most likely for the touch panel ADC, not for the SoC one.
Here it could be LDO3. You have to put something otherwise dtschema will
complain.

Go with the LDO3 and maybe a comment like: "TBD, not confirmed".

> 
> > > +};
> 
> (...)
> 
> > > +
> > > +&i2c_7 {
> > > +	samsung,i2c-sda-delay = <100>;
> > > +	samsung,i2c-slave-addr = <0x10>;
> > > +	samsung,i2c-max-bus-freq = <400000>;
> > > +	pinctrl-0 = <&i2c7_bus>;
> > > +	pinctrl-names = "default";
> > > +	status = "okay";
> > > +
> > > +	max77686: max77686_pmic@9 {
> > > +		compatible = "maxim,max77686";
> > > +		interrupt-parent = <&gpx0>;
> > > +		interrupts = <7 IRQ_TYPE_NONE>;
> > > +		pinctrl-0 = <&max77686_irq>;
> > > +		pinctrl-names = "default";
> > > +		reg = <0x09>;
> > > +		#clock-cells = <1>;
> > > +
> > > +		voltage-regulators {
> > 
> > Just "regulators" and no empty line after this.
> > 
> > You should define all regulators here. If some are unknown, keep the
> > min-max the same as in driver.
> > 
> 
> I used the driver to read all the voltages, it also reads values for
> the LDOs that are not defined in the DT, so I have values for all of
> them setup by the bootloader. What I don't know is their name and what
> they are used for. Interestingly apart from two LDOs, the voltages did
> match exactly with those from the midas DT, so it could be very
> similar. The two non-matching were only off by 0.1V. How should I go
> about this?

Actually, let's skip the constraints (min-max) for unknown regulators.
Just add the entries with generic names, like:
arch/arm/boot/dts/exynos5410-odroidxu.dts

I would not put here min-max constraints from bootloader because pretty
often it has only an initial setup for specific frequency - just to make
it booting.

If you have the constraints (min-max, always on) from vendor sources,
you could add them.

Best regards,
Krzysztof
Martin Jücker Oct. 29, 2020, 9:40 p.m. UTC | #6
On Tue, Oct 27, 2020 at 09:17:51AM +0100, Krzysztof Kozlowski wrote:
> On Tue, Oct 27, 2020 at 12:27:09AM +0100, Martin Juecker wrote:
> > > > +
> > > > +	max77686: max77686_pmic@9 {
> > > > +		compatible = "maxim,max77686";
> > > > +		interrupt-parent = <&gpx0>;
> > > > +		interrupts = <7 IRQ_TYPE_NONE>;
> > > > +		pinctrl-0 = <&max77686_irq>;
> > > > +		pinctrl-names = "default";
> > > > +		reg = <0x09>;
> > > > +		#clock-cells = <1>;
> > > > +
> > > > +		voltage-regulators {
> > > 
> > > Just "regulators" and no empty line after this.
> > > 
> > > You should define all regulators here. If some are unknown, keep the
> > > min-max the same as in driver.
> > > 
> > 
> > I used the driver to read all the voltages, it also reads values for
> > the LDOs that are not defined in the DT, so I have values for all of
> > them setup by the bootloader. What I don't know is their name and what
> > they are used for. Interestingly apart from two LDOs, the voltages did
> > match exactly with those from the midas DT, so it could be very
> > similar. The two non-matching were only off by 0.1V. How should I go
> > about this?
> 
> Actually, let's skip the constraints (min-max) for unknown regulators.
> Just add the entries with generic names, like:
> arch/arm/boot/dts/exynos5410-odroidxu.dts
> 
> I would not put here min-max constraints from bootloader because pretty
> often it has only an initial setup for specific frequency - just to make
> it booting.
> 
> If you have the constraints (min-max, always on) from vendor sources,
> you could add them.
> 
> Best regards,
> Krzysztof

As all the missing regulators are not defined in the vendor sources, I
have no constraints to work with.

What I noticed when all the LDOs are defined, the device reboot
behaviour is different. Instead of the usual 1-2 seconds for screen off
and on again, it's now more like 10 seconds.

Cheers
Martin
Marek Szyprowski Oct. 30, 2020, 7:41 a.m. UTC | #7
Hi Martin,

On 29.10.2020 22:40, Martin Juecker wrote:
> On Tue, Oct 27, 2020 at 09:17:51AM +0100, Krzysztof Kozlowski wrote:
>> On Tue, Oct 27, 2020 at 12:27:09AM +0100, Martin Juecker wrote:
>>>>> +
>>>>> +	max77686: max77686_pmic@9 {
>>>>> +		compatible = "maxim,max77686";
>>>>> +		interrupt-parent = <&gpx0>;
>>>>> +		interrupts = <7 IRQ_TYPE_NONE>;
>>>>> +		pinctrl-0 = <&max77686_irq>;
>>>>> +		pinctrl-names = "default";
>>>>> +		reg = <0x09>;
>>>>> +		#clock-cells = <1>;
>>>>> +
>>>>> +		voltage-regulators {
>>>> Just "regulators" and no empty line after this.
>>>>
>>>> You should define all regulators here. If some are unknown, keep the
>>>> min-max the same as in driver.
>>>>
>>> I used the driver to read all the voltages, it also reads values for
>>> the LDOs that are not defined in the DT, so I have values for all of
>>> them setup by the bootloader. What I don't know is their name and what
>>> they are used for. Interestingly apart from two LDOs, the voltages did
>>> match exactly with those from the midas DT, so it could be very
>>> similar. The two non-matching were only off by 0.1V. How should I go
>>> about this?
>> Actually, let's skip the constraints (min-max) for unknown regulators.
>> Just add the entries with generic names, like:
>> arch/arm/boot/dts/exynos5410-odroidxu.dts
>>
>> I would not put here min-max constraints from bootloader because pretty
>> often it has only an initial setup for specific frequency - just to make
>> it booting.
>>
>> If you have the constraints (min-max, always on) from vendor sources,
>> you could add them.
>>
>> Best regards,
>> Krzysztof
> As all the missing regulators are not defined in the vendor sources, I
> have no constraints to work with.
>
> What I noticed when all the LDOs are defined, the device reboot
> behaviour is different. Instead of the usual 1-2 seconds for screen off
> and on again, it's now more like 10 seconds.

Then it looks that some regulators get turned off too early and shutdown 
sequence encounters timeout. You can try to find which regulator is 
responsible for that by adding 'always-on' property to those regulators 
and doing the reboot test. Once found you may either keep it as always 
on, or check in if its consumers are properly defined.

Best regards
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4572db3fa5ae..b6d72bd7ebac 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -195,6 +195,7 @@  dtb-$(CONFIG_ARCH_EXYNOS4) += \
 	exynos4412-odroidx.dtb \
 	exynos4412-odroidx2.dtb \
 	exynos4412-origen.dtb \
+	exynos4412-p4note-n801x.dtb \
 	exynos4412-smdk4412.dtb \
 	exynos4412-tiny4412.dtb \
 	exynos4412-trats2.dtb
diff --git a/arch/arm/boot/dts/exynos4412-p4note-n801x.dts b/arch/arm/boot/dts/exynos4412-p4note-n801x.dts
new file mode 100644
index 000000000000..e7fb5b96e6c6
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-p4note-n801x.dts
@@ -0,0 +1,16 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Galaxy Note 10.1 - N801x (wifi only version)
+ *
+ * Copyright (c) 2020 Martin Jücker <martin.juecker@gmail.com>
+ */
+
+/dts-v1/;
+#include "exynos4412-p4note.dtsi"
+
+/ {
+	model = "Samsung Galaxy Note 10.1 (GT-N8010/N8013) based on Exynos4412";
+	compatible = "samsung,n801x", "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
+
+	/* this is the base variant without any kind of modem */
+};
diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
new file mode 100644
index 000000000000..6d7e84f40e92
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
@@ -0,0 +1,1057 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4412 based p4note device family base DT
+ *
+ * Copyright (c) 2020 Martin Jücker <martin.juecker@gmail.com>
+ */
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77686.h>
+#include <dt-bindings/pinctrl/samsung.h>
+
+/ {
+	compatible = "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = &serial_2;
+	};
+
+	firmware@204f000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0204F000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys>;
+
+		key-down {
+			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume down";
+			debounce-interval = <10>;
+		};
+
+		key-up {
+			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume up";
+			debounce-interval = <10>;
+		};
+
+		key-power {
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			debounce-interval = <10>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	tsp_reg_1: voltage-regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "TSP_FIXED_VOLTAGES_1";
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_reg_gpio_1>;
+		gpios = <&gpm4 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	tsp_reg_2: voltage-regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "TSP_FIXED_VOLTAGES_2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_reg_gpio_2>;
+		gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	tsp_reg_3: voltage-regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "TSP_FIXED_VOLTAGES_3";
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_reg_gpio_3>;
+		gpios = <&gpb 7 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&wifi_reset>;
+		pinctrl-names = "default";
+		clocks = <&max77686 MAX77686_CLK_PMIC>;
+		clock-names = "ext_clock";
+	};
+
+	i2c-gpio-10 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ak8975@c {
+			compatible = "asahi-kasei,ak8975";
+			reg = <0x0c>;
+			interrupt-parent = <&gpm4>;
+			interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&ak8975_irq>;
+		};
+	};
+
+	i2c-gpio-14 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		max17042@36 {
+			compatible = "maxim,max17042";
+			reg = <0x36>;
+			interrupt-parent = <&gpx2>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			maxim,rsns-microohm = <10000>;
+			maxim,over-heat-temp = <600>;
+			maxim,over-volt = <4300>;
+		};
+	};
+
+	i2c-gpio-19 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpm4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpm4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		stmpe_mfd@41 {
+			compatible = "st,stmpe811";
+			reg = <0x41>;
+			interrupt-parent = <&gpx0>;
+			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			irq-trigger = <0x1>;
+			st,adc-freq = <3>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,sample-time = <3>;
+
+			stmpe_adc: stmpe_adc {
+				compatible = "st,stmpe-adc";
+				#io-channel-cells = <1>;
+				st,norequest-mask = <0x2F>;
+			};
+		};
+	};
+};
+
+&adc {
+	status = "okay";
+};
+
+&bus_dmc {
+	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&bus_acp {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_c2c {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_leftbus {
+	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+	vdd-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&bus_rightbus {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_display {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_fsys {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_peri {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			/* Corresponds to 800MHz at freq_table */
+			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, <&cpu2 7 7>, <&cpu3 7 7>;
+		};
+		map1 {
+			/* Corresponds to 200MHz at freq_table */
+			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>, <&cpu2 13 13>, <&cpu3 13 13>;
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&exynos_usbphy {
+	status = "okay";
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	display-timings {
+		timing0 {
+			clock-frequency = <66666666>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <18>;
+			hback-porch = <36>;
+			hsync-len = <16>;
+			vback-porch = <16>;
+			vfront-porch = <4>;
+			vsync-len = <3>;
+			hsync-active = <1>;
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&buck4_reg>;
+	status = "okay";
+};
+
+&hsotg {
+	vusb_a-supply = <&ldo12_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_3 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c3_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		reset-gpios = <&gpm0 4 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpm2>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&tsp_rst &tsp_irq>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c_7 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c7_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	max77686: max77686_pmic@9 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&gpx0>;
+		interrupts = <7 IRQ_TYPE_NONE>;
+		pinctrl-0 = <&max77686_irq>;
+		pinctrl-names = "default";
+		reg = <0x09>;
+		#clock-cells = <1>;
+
+		voltage-regulators {
+
+			/* WM8994 audio */
+			ldo3_reg: LDO3 {
+				regulator-name = "VCC_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			/* Unknown */
+			ldo5_reg: LDO5 {
+				regulator-name = "VCC_1.8V_IO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* CSI IP block */
+			ldo8_reg: LDO8 {
+				regulator-name = "VMIPI_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			/* IR LED on/off */
+			ldo9_reg: LDO9 {
+				regulator-name = "VLED_IC_1.9V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* CSI IP block */
+			ldo10_reg: LDO10 {
+				regulator-name = "VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			/* Unknown */
+			ldo11_reg: LDO11 {
+				regulator-name = "VABB1_1.9V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* USB OTG */
+			ldo12_reg: LDO12 {
+				regulator-name = "VUOTG_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			/* Unknown */
+			ldo14_reg: LDO14 {
+				regulator-name = "VABB2_1.9V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* Camera ISX012 */
+			ldo18_reg: LDO18 {
+				regulator-name = "CAM_IO_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* Camera S5K6A3 */
+			ldo19_reg: LDO19 {
+				regulator-name = "VT_CORE_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* MMC2 */
+			ldo21_reg: LDO21 {
+				regulator-name = "VTF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			/* ADC */
+			ldo23_reg: LDO23 {
+				regulator-name = "VDD_ADC_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* Camera S5K6A3 */
+			ldo24_reg: LDO24 {
+				regulator-name = "CAM_A2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* IR LED sending */
+			ldo25_reg: LDO25 {
+				regulator-name = "VLED_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* Camera ISX012 */
+			ldo26_reg: LDO26 {
+				regulator-name = "3MP_AF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_INT";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_G3D";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1075000>;
+				regulator-boot-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "3MP_CORE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&mshc_0 {
+	broken-cd;
+	non-removable;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <0>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	status = "okay";
+};
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep0>;
+
+	tsp_reg_gpio_2: tsp-reg-gpio-2 {
+		samsung,pins = "gpb-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	tsp_reg_gpio_3: tsp-reg-gpio-3 {
+		samsung,pins = "gpb-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	sleep0: sleep-states {
+		PIN_SLP(gpa0-0, INPUT, NONE);
+		PIN_SLP(gpa0-1, OUT0, NONE);
+		PIN_SLP(gpa0-2, INPUT, NONE);
+		PIN_SLP(gpa0-3, INPUT, UP);
+		PIN_SLP(gpa0-4, INPUT, NONE);
+		PIN_SLP(gpa0-5, INPUT, DOWN);
+		PIN_SLP(gpa0-6, INPUT, DOWN);
+		PIN_SLP(gpa0-7, INPUT, UP);
+
+		PIN_SLP(gpa1-0, INPUT, DOWN);
+		PIN_SLP(gpa1-1, INPUT, DOWN);
+		PIN_SLP(gpa1-2, INPUT, DOWN);
+		PIN_SLP(gpa1-3, INPUT, DOWN);
+		PIN_SLP(gpa1-4, INPUT, DOWN);
+		PIN_SLP(gpa1-5, INPUT, DOWN);
+
+		PIN_SLP(gpb-0, INPUT, NONE);
+		PIN_SLP(gpb-1, INPUT, NONE);
+		PIN_SLP(gpb-2, INPUT, NONE);
+		PIN_SLP(gpb-3, INPUT, NONE);
+		PIN_SLP(gpb-4, INPUT, DOWN);
+		PIN_SLP(gpb-5, INPUT, DOWN);
+		PIN_SLP(gpb-6, INPUT, DOWN);
+		PIN_SLP(gpb-7, INPUT, DOWN);
+
+		PIN_SLP(gpc0-0, INPUT, DOWN);
+		PIN_SLP(gpc0-1, INPUT, DOWN);
+		PIN_SLP(gpc0-2, INPUT, DOWN);
+		PIN_SLP(gpc0-3, INPUT, DOWN);
+		PIN_SLP(gpc0-4, INPUT, DOWN);
+
+		PIN_SLP(gpc1-0, INPUT, UP);
+		PIN_SLP(gpc1-1, PREV, NONE);
+		PIN_SLP(gpc1-2, INPUT, UP);
+		PIN_SLP(gpc1-3, INPUT, UP);
+		PIN_SLP(gpc1-4, INPUT, UP);
+
+		PIN_SLP(gpd0-0, INPUT, DOWN);
+		PIN_SLP(gpd0-1, OUT0, NONE);
+		PIN_SLP(gpd0-2, INPUT, NONE);
+		PIN_SLP(gpd0-3, INPUT, NONE);
+
+		PIN_SLP(gpd1-0, INPUT, DOWN);
+		PIN_SLP(gpd1-1, INPUT, DOWN);
+		PIN_SLP(gpd1-2, INPUT, NONE);
+		PIN_SLP(gpd1-3, INPUT, NONE);
+
+		PIN_SLP(gpf0-0, OUT0, NONE);
+		PIN_SLP(gpf0-1, OUT0, NONE);
+		PIN_SLP(gpf0-2, OUT0, NONE);
+		PIN_SLP(gpf0-3, OUT0, NONE);
+		PIN_SLP(gpf0-4, OUT0, NONE);
+		PIN_SLP(gpf0-5, OUT0, NONE);
+		PIN_SLP(gpf0-6, OUT0, NONE);
+		PIN_SLP(gpf0-7, OUT0, NONE);
+
+		PIN_SLP(gpf1-0, OUT0, NONE);
+		PIN_SLP(gpf1-1, OUT0, NONE);
+		PIN_SLP(gpf1-2, OUT0, NONE);
+		PIN_SLP(gpf1-3, OUT0, NONE);
+		PIN_SLP(gpf1-4, OUT0, NONE);
+		PIN_SLP(gpf1-5, OUT0, NONE);
+		PIN_SLP(gpf1-6, OUT0, NONE);
+		PIN_SLP(gpf1-7, OUT0, NONE);
+
+		PIN_SLP(gpf2-0, OUT0, NONE);
+		PIN_SLP(gpf2-1, OUT0, NONE);
+		PIN_SLP(gpf2-2, OUT0, NONE);
+		PIN_SLP(gpf2-3, OUT0, NONE);
+		PIN_SLP(gpf2-4, OUT0, NONE);
+		PIN_SLP(gpf2-5, OUT0, NONE);
+		PIN_SLP(gpf2-6, OUT0, NONE);
+		PIN_SLP(gpf2-7, OUT0, NONE);
+
+		PIN_SLP(gpf3-0, OUT0, NONE);
+		PIN_SLP(gpf3-1, OUT0, NONE);
+		PIN_SLP(gpf3-2, OUT0, NONE);
+		PIN_SLP(gpf3-3, OUT0, NONE);
+		PIN_SLP(gpf3-4, OUT0, NONE);
+		PIN_SLP(gpf3-5, OUT0, NONE);
+
+		PIN_SLP(gpj0-0, INPUT, DOWN);
+		PIN_SLP(gpj0-1, INPUT, DOWN);
+		PIN_SLP(gpj0-2, INPUT, DOWN);
+		PIN_SLP(gpj0-3, PREV, NONE);
+		PIN_SLP(gpj0-4, PREV, NONE);
+		PIN_SLP(gpj0-5, OUT0, NONE);
+		PIN_SLP(gpj0-6, OUT0, NONE);
+		PIN_SLP(gpj0-7, OUT0, NONE);
+
+		PIN_SLP(gpj1-0, OUT0, NONE);
+		PIN_SLP(gpj1-1, INPUT, DOWN);
+		PIN_SLP(gpj1-2, PREV, NONE);
+		PIN_SLP(gpj1-3, OUT0, NONE);
+	};
+};
+
+&pinctrl_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep1>;
+
+	uart_sel: uart-sel {
+		samsung,pins = "gpl2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-val = <1>;
+		/* 0 = CP, 1 = AP (serial output) */
+	};
+
+	gpio_keys: gpio-keys {
+		samsung,pins = "gpx2-2", "gpx2-7", "gpx3-3";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	wifi_host_wake: wifi-host-wake {
+		samsung,pins = "gpx2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	bt_shutdown: bt-shutdown {
+		samsung,pins = "gpl0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-val = <1>;
+	};
+
+	bt_device_wakeup: bt-device-wakeup {
+		samsung,pins = "gpx3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_host_wakeup: bt-host-wakeup {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	max77686_irq: max77686-irq {
+		samsung,pins = "gpx0-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	sdhci2_cd_irq: sdhci2-cd-irq {
+		samsung,pins = "gpx3-4";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	tsp_rst: tsp-rst {
+		samsung,pins = "gpm0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-val = <1>;
+	};
+
+	tsp_reg_gpio_1: tsp-reg-gpio-1 {
+		samsung,pins = "gpm4-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	tsp_irq: tsp-irq {
+		samsung,pins = "gpm2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	wifi_reset: wifi-reset {
+		samsung,pins = "gpm3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	sd3_wifi: sd3-wifi {
+		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	ak8975_irq: ak8975-irq {
+		samsung,pins = "gpm4-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	sleep1: sleep-states {
+		PIN_SLP(gpk0-0, PREV, NONE);
+		PIN_SLP(gpk0-1, PREV, NONE);
+		PIN_SLP(gpk0-2, PREV, NONE);
+		PIN_SLP(gpk0-3, PREV, NONE);
+		PIN_SLP(gpk0-4, PREV, NONE);
+		PIN_SLP(gpk0-5, PREV, NONE);
+		PIN_SLP(gpk0-6, PREV, NONE);
+
+		PIN_SLP(gpk1-0, INPUT, DOWN);
+		PIN_SLP(gpk1-1, INPUT, DOWN);
+		PIN_SLP(gpk1-2, INPUT, DOWN);
+		PIN_SLP(gpk1-3, PREV, NONE);
+		PIN_SLP(gpk1-4, PREV, NONE);
+		PIN_SLP(gpk1-5, PREV, NONE);
+		PIN_SLP(gpk1-6, PREV, NONE);
+
+		PIN_SLP(gpk2-0, INPUT, DOWN);
+		PIN_SLP(gpk2-1, INPUT, DOWN);
+		PIN_SLP(gpk2-2, INPUT, DOWN);
+		PIN_SLP(gpk2-3, INPUT, DOWN);
+		PIN_SLP(gpk2-4, INPUT, DOWN);
+		PIN_SLP(gpk2-5, INPUT, DOWN);
+		PIN_SLP(gpk2-6, INPUT, DOWN);
+
+		PIN_SLP(gpk3-0, OUT0, NONE);
+		PIN_SLP(gpk3-1, INPUT, NONE);
+		PIN_SLP(gpk3-2, INPUT, DOWN);
+		PIN_SLP(gpk3-3, INPUT, NONE);
+		PIN_SLP(gpk3-4, INPUT, NONE);
+		PIN_SLP(gpk3-5, INPUT, NONE);
+		PIN_SLP(gpk3-6, INPUT, NONE);
+
+		PIN_SLP(gpl0-0, OUT0, NONE);
+		PIN_SLP(gpl0-1, INPUT, NONE);
+		PIN_SLP(gpl0-2, INPUT, NONE);
+		PIN_SLP(gpl0-3, INPUT, DOWN);
+		PIN_SLP(gpl0-4, PREV, NONE);
+		PIN_SLP(gpl0-6, PREV, NONE);
+
+		PIN_SLP(gpl1-0, OUT0, NONE);
+		PIN_SLP(gpl1-1, OUT0, NONE);
+
+		PIN_SLP(gpl2-0, INPUT, DOWN);
+		PIN_SLP(gpl2-1, INPUT, DOWN);
+		PIN_SLP(gpl2-2, INPUT, DOWN);
+		PIN_SLP(gpl2-3, INPUT, DOWN);
+		PIN_SLP(gpl2-4, OUT0, NONE);
+		PIN_SLP(gpl2-5, INPUT, DOWN);
+		PIN_SLP(gpl2-6, PREV, NONE);
+		PIN_SLP(gpl2-7, PREV, NONE);
+
+		PIN_SLP(gpm0-0, PREV, NONE);
+		PIN_SLP(gpm0-1, OUT0, NONE);
+		PIN_SLP(gpm0-2, INPUT, DOWN);
+		PIN_SLP(gpm0-3, INPUT, NONE);
+		PIN_SLP(gpm0-4, OUT0, NONE);
+		PIN_SLP(gpm0-5, OUT0, NONE);
+		PIN_SLP(gpm0-6, INPUT, DOWN);
+		PIN_SLP(gpm0-7, OUT0, NONE);
+
+		PIN_SLP(gpm1-0, INPUT, NONE);
+		PIN_SLP(gpm1-1, INPUT, NONE);
+		PIN_SLP(gpm1-2, INPUT, NONE);
+		PIN_SLP(gpm1-3, INPUT, NONE);
+		PIN_SLP(gpm1-4, INPUT, NONE);
+		PIN_SLP(gpm1-5, INPUT, NONE);
+		PIN_SLP(gpm1-6, INPUT, DOWN);
+
+		PIN_SLP(gpm2-0, INPUT, NONE);
+		PIN_SLP(gpm2-1, INPUT, NONE);
+		PIN_SLP(gpm2-2, OUT0, NONE);
+		PIN_SLP(gpm2-3, OUT0, DOWN);
+		PIN_SLP(gpm2-4, INPUT, DOWN);
+
+		PIN_SLP(gpm3-0, PREV, NONE);
+		PIN_SLP(gpm3-1, PREV, NONE);
+		PIN_SLP(gpm3-2, PREV, NONE);
+		PIN_SLP(gpm3-3, OUT1, NONE);
+		PIN_SLP(gpm3-4, OUT0, DOWN);
+		PIN_SLP(gpm3-5, PREV, NONE);
+		PIN_SLP(gpm3-6, PREV, NONE);
+		PIN_SLP(gpm3-7, OUT0, NONE);
+
+		PIN_SLP(gpm4-0, INPUT, NONE);
+		PIN_SLP(gpm4-1, INPUT, NONE);
+		PIN_SLP(gpm4-2, INPUT, DOWN);
+		PIN_SLP(gpm4-3, INPUT, DOWN);
+		PIN_SLP(gpm4-4, PREV, NONE);
+		PIN_SLP(gpm4-5, OUT0, NONE);
+		PIN_SLP(gpm4-6, OUT0, NONE);
+		PIN_SLP(gpm4-7, INPUT, DOWN);
+
+		PIN_SLP(gpy0-0, INPUT, DOWN);
+		PIN_SLP(gpy0-1, INPUT, DOWN);
+		PIN_SLP(gpy0-2, INPUT, NONE);
+		PIN_SLP(gpy0-3, INPUT, NONE);
+		PIN_SLP(gpy0-4, INPUT, NONE);
+		PIN_SLP(gpy0-5, INPUT, NONE);
+
+		PIN_SLP(gpy1-0, INPUT, DOWN);
+		PIN_SLP(gpy1-1, INPUT, DOWN);
+		PIN_SLP(gpy1-2, INPUT, DOWN);
+		PIN_SLP(gpy1-3, INPUT, DOWN);
+
+		PIN_SLP(gpy2-0, PREV, NONE);
+		PIN_SLP(gpy2-1, INPUT, DOWN);
+		PIN_SLP(gpy2-2, INPUT, NONE);
+		PIN_SLP(gpy2-3, INPUT, NONE);
+		PIN_SLP(gpy2-4, INPUT, NONE);
+		PIN_SLP(gpy2-5, INPUT, NONE);
+
+		PIN_SLP(gpy3-0, INPUT, DOWN);
+		PIN_SLP(gpy3-1, INPUT, DOWN);
+		PIN_SLP(gpy3-2, INPUT, DOWN);
+		PIN_SLP(gpy3-3, INPUT, DOWN);
+		PIN_SLP(gpy3-4, INPUT, DOWN);
+		PIN_SLP(gpy3-5, INPUT, DOWN);
+		PIN_SLP(gpy3-6, INPUT, DOWN);
+		PIN_SLP(gpy3-7, INPUT, DOWN);
+
+		PIN_SLP(gpy4-0, INPUT, DOWN);
+		PIN_SLP(gpy4-1, INPUT, DOWN);
+		PIN_SLP(gpy4-2, INPUT, DOWN);
+		PIN_SLP(gpy4-3, INPUT, DOWN);
+		PIN_SLP(gpy4-4, INPUT, DOWN);
+		PIN_SLP(gpy4-5, INPUT, DOWN);
+		PIN_SLP(gpy4-6, INPUT, DOWN);
+		PIN_SLP(gpy4-7, INPUT, DOWN);
+
+		PIN_SLP(gpy5-0, INPUT, DOWN);
+		PIN_SLP(gpy5-1, INPUT, DOWN);
+		PIN_SLP(gpy5-2, INPUT, DOWN);
+		PIN_SLP(gpy5-3, INPUT, DOWN);
+		PIN_SLP(gpy5-4, INPUT, DOWN);
+		PIN_SLP(gpy5-5, INPUT, DOWN);
+		PIN_SLP(gpy5-6, INPUT, DOWN);
+		PIN_SLP(gpy5-7, INPUT, DOWN);
+
+		PIN_SLP(gpy6-0, INPUT, DOWN);
+		PIN_SLP(gpy6-1, INPUT, DOWN);
+		PIN_SLP(gpy6-2, INPUT, DOWN);
+		PIN_SLP(gpy6-3, INPUT, DOWN);
+		PIN_SLP(gpy6-4, INPUT, DOWN);
+		PIN_SLP(gpy6-5, INPUT, DOWN);
+		PIN_SLP(gpy6-6, INPUT, DOWN);
+		PIN_SLP(gpy6-7, INPUT, DOWN);
+	};
+};
+
+&pinctrl_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep2>;
+
+	sleep2: sleep-states {
+		PIN_SLP(gpz-0, INPUT, DOWN);
+		PIN_SLP(gpz-1, INPUT, DOWN);
+		PIN_SLP(gpz-2, INPUT, DOWN);
+		PIN_SLP(gpz-3, INPUT, DOWN);
+		PIN_SLP(gpz-4, INPUT, DOWN);
+		PIN_SLP(gpz-5, INPUT, DOWN);
+		PIN_SLP(gpz-6, INPUT, DOWN);
+	};
+};
+
+&pinctrl_3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep3>;
+
+	sleep3: sleep-states {
+		PIN_SLP(gpv0-0, INPUT, DOWN);
+		PIN_SLP(gpv0-1, INPUT, DOWN);
+		PIN_SLP(gpv0-2, INPUT, DOWN);
+		PIN_SLP(gpv0-3, INPUT, DOWN);
+		PIN_SLP(gpv0-4, INPUT, DOWN);
+		PIN_SLP(gpv0-5, INPUT, DOWN);
+		PIN_SLP(gpv0-6, INPUT, DOWN);
+		PIN_SLP(gpv0-7, INPUT, DOWN);
+
+		PIN_SLP(gpv1-0, INPUT, DOWN);
+		PIN_SLP(gpv1-1, INPUT, DOWN);
+		PIN_SLP(gpv1-2, INPUT, DOWN);
+		PIN_SLP(gpv1-3, INPUT, DOWN);
+		PIN_SLP(gpv1-4, INPUT, DOWN);
+		PIN_SLP(gpv1-5, INPUT, DOWN);
+		PIN_SLP(gpv1-6, INPUT, DOWN);
+		PIN_SLP(gpv1-7, INPUT, DOWN);
+
+		PIN_SLP(gpv2-0, INPUT, DOWN);
+		PIN_SLP(gpv2-1, INPUT, DOWN);
+		PIN_SLP(gpv2-2, INPUT, DOWN);
+		PIN_SLP(gpv2-3, INPUT, DOWN);
+		PIN_SLP(gpv2-4, INPUT, DOWN);
+		PIN_SLP(gpv2-5, INPUT, DOWN);
+		PIN_SLP(gpv2-6, INPUT, DOWN);
+		PIN_SLP(gpv2-7, INPUT, DOWN);
+
+		PIN_SLP(gpv3-0, INPUT, DOWN);
+		PIN_SLP(gpv3-1, INPUT, DOWN);
+		PIN_SLP(gpv3-2, INPUT, DOWN);
+		PIN_SLP(gpv3-3, INPUT, DOWN);
+		PIN_SLP(gpv3-4, INPUT, DOWN);
+		PIN_SLP(gpv3-5, INPUT, DOWN);
+		PIN_SLP(gpv3-6, INPUT, DOWN);
+		PIN_SLP(gpv3-7, INPUT, DOWN);
+
+		PIN_SLP(gpv4-0, INPUT, DOWN);
+		PIN_SLP(gpv4-1, INPUT, DOWN);
+	};
+};
+
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents =  <&clock CLK_XUSBXTI>;
+};
+
+&rtc {
+	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+	status = "okay";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd_irq>;
+	pinctrl-names = "default";
+	vmmc-supply = <&ldo21_reg>;
+	status = "okay";
+};
+
+&sdhci_3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wlan_pwrseq>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_wifi &wifi_host_wake>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <0x1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&serial_0 {
+	pinctrl-0 = <&uart0_data &uart0_fctl>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
+		pinctrl-names = "default";
+
+		max-speed = <2000000>;
+		shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+		clocks = <&max77686 MAX77686_CLK_PMIC>;
+		clock-names = "lpo";
+	};
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	pinctrl-0 = <&uart_sel>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&tmu {
+	status = "okay";
+};