@@ -76,7 +76,7 @@ &i2c_0 {
samsung,i2c-max-bus-freq = <100000>;
status = "okay";
- s2mps14_pmic@66 {
+ pmic@66 {
compatible = "samsung,s2mps14-pmic";
interrupt-parent = <&gpx3>;
interrupts = <5 IRQ_TYPE_NONE>;
@@ -34,10 +34,10 @@ firmware@205f000 {
reg = <0x0205F000 0x1000>;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- power_key {
+ power-key {
gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "power key";
@@ -62,7 +62,7 @@ i2c_max77836: i2c-gpio-0 {
#address-cells = <1>;
#size-cells = <0>;
- max77836: subpmic@25 {
+ max77836: pmic@25 {
compatible = "maxim,max77836";
interrupt-parent = <&gpx1>;
interrupts = <5 IRQ_TYPE_NONE>;
@@ -197,7 +197,7 @@ &i2c_0 {
samsung,i2c-max-bus-freq = <100000>;
status = "okay";
- s2mps14_pmic@66 {
+ pmic@66 {
compatible = "samsung,s2mps14-pmic";
interrupt-parent = <&gpx0>;
interrupts = <7 IRQ_TYPE_NONE>;
@@ -38,10 +38,10 @@ firmware@205f000 {
reg = <0x0205F000 0x1000>;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- power_key {
+ power-key {
gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "power key";
@@ -62,7 +62,7 @@ i2c_max77836: i2c-gpio-0 {
#address-cells = <1>;
#size-cells = <0>;
- max77836: subpmic@25 {
+ max77836: pmic@25 {
compatible = "maxim,max77836";
interrupt-parent = <&gpx1>;
interrupts = <5 IRQ_TYPE_NONE>;
@@ -267,7 +267,7 @@ &i2c_0 {
samsung,i2c-max-bus-freq = <100000>;
status = "okay";
- s2mps14_pmic@66 {
+ pmic@66 {
compatible = "samsung,s2mps14-pmic";
interrupt-parent = <&gpx0>;
interrupts = <7 IRQ_TYPE_NONE>;
The Devicetree specification expects device node names to have a generic name, representing the class of a device. Also the convention for node names is to use hyphens, not underscores. No functional changes. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm/boot/dts/exynos3250-artik5.dtsi | 2 +- arch/arm/boot/dts/exynos3250-monk.dts | 8 ++++---- arch/arm/boot/dts/exynos3250-rinato.dts | 8 ++++---- 3 files changed, 9 insertions(+), 9 deletions(-)