| Message ID | 20201222070520.710096-4-timon.baetz@protonmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v3,1/7] extcon: max8997: Add CHGINS and CHGRM interrupt handling | expand |
On Tue, Dec 22, 2020 at 07:31:40AM +0000, Timon Baetz wrote: > Register for extcon notification and set charging current depending on > the detected cable type. Current values are taken from vendor kernel, > where most charger types end up setting 650mA [0]. > > Also enable and disable the CHARGER regulator based on extcon events. > > [0] https://github.com/krzk/linux-vendor-backup/blob/samsung/galaxy-s2-epic-4g-touch-sph-d710-exynos4210-dump/drivers/misc/max8997-muic.c#L1675-L1678 > > Signed-off-by: Timon Baetz <timon.baetz@protonmail.com> > --- > drivers/power/supply/max8997_charger.c | 94 ++++++++++++++++++++++++++ > 1 file changed, 94 insertions(+) > > diff --git a/drivers/power/supply/max8997_charger.c b/drivers/power/supply/max8997_charger.c > index 1947af25879a..673ffff14ae0 100644 > --- a/drivers/power/supply/max8997_charger.c > +++ b/drivers/power/supply/max8997_charger.c > @@ -6,12 +6,14 @@ > // MyungJoo Ham <myungjoo.ham@samsung.com> > > #include <linux/err.h> > +#include <linux/extcon.h> > #include <linux/module.h> > #include <linux/slab.h> > #include <linux/platform_device.h> > #include <linux/power_supply.h> > #include <linux/mfd/max8997.h> > #include <linux/mfd/max8997-private.h> > +#include <linux/regulator/consumer.h> > > /* MAX8997_REG_STATUS4 */ > #define DCINOK_SHIFT 1 > @@ -31,6 +33,10 @@ struct charger_data { > struct device *dev; > struct max8997_dev *iodev; > struct power_supply *battery; > + struct regulator *reg; > + struct extcon_dev *edev; > + struct notifier_block extcon_nb; > + struct work_struct extcon_work; > }; > > static enum power_supply_property max8997_battery_props[] = { > @@ -88,6 +94,67 @@ static int max8997_battery_get_property(struct power_supply *psy, > return 0; > } > > +static void max8997_battery_extcon_evt_stop_work(void *data) > +{ > + struct charger_data *charger = data; > + > + cancel_work_sync(&charger->extcon_work); > +} > + > +static void max8997_battery_extcon_evt_worker(struct work_struct *work) > +{ > + struct charger_data *charger = > + container_of(work, struct charger_data, extcon_work); > + struct extcon_dev *edev = charger->edev; > + int current_limit; > + > + if (extcon_get_state(edev, EXTCON_CHG_USB_SDP) > 0) { > + dev_dbg(charger->dev, "USB SDP charger is connected\n"); > + current_limit = 450000; > + } else if (extcon_get_state(edev, EXTCON_CHG_USB_DCP) > 0) { > + dev_dbg(charger->dev, "USB DCP charger is connected\n"); > + current_limit = 650000; > + } else if (extcon_get_state(edev, EXTCON_CHG_USB_FAST) > 0) { > + dev_dbg(charger->dev, "USB FAST charger is connected\n"); > + current_limit = 650000; > + } else if (extcon_get_state(edev, EXTCON_CHG_USB_SLOW) > 0) { > + dev_dbg(charger->dev, "USB SLOW charger is connected\n"); > + current_limit = 650000; > + } else if (extcon_get_state(edev, EXTCON_CHG_USB_CDP) > 0) { > + dev_dbg(charger->dev, "USB CDP charger is connected\n"); > + current_limit = 650000; > + } else { > + dev_dbg(charger->dev, "USB charger is diconnected\n"); > + current_limit = -1; > + } > + > + if (current_limit > 0) { > + int ret = regulator_set_current_limit(charger->reg, current_limit, current_limit); > + > + if (ret) { > + dev_err(charger->dev, "failed to set current limit: %d\n", ret); > + return; > + } > + ret = regulator_enable(charger->reg); > + if (ret) > + dev_err(charger->dev, "failed to enable regulator: %d\n", ret); > + } else { > + int ret = regulator_disable(charger->reg); > + > + if (ret) > + dev_err(charger->dev, "failed to disable regulator: %d\n", ret); > + } > +} > + > +static int max8997_battery_extcon_evt(struct notifier_block *nb, > + unsigned long event, void *param) > +{ > + struct charger_data *charger = > + container_of(nb, struct charger_data, extcon_nb); > + schedule_work(&charger->extcon_work); > + return NOTIFY_OK; > +} > + > static const struct power_supply_desc max8997_battery_desc = { > .name = "max8997_pmic", > .type = POWER_SUPPLY_TYPE_BATTERY, > @@ -170,6 +237,33 @@ static int max8997_battery_probe(struct platform_device *pdev) > return PTR_ERR(charger->battery); > } > > + charger->reg = devm_regulator_get(&pdev->dev, "charger"); The code looks good but isn't it breaking all existing platforms? Best regards, Krzysztof > + if (IS_ERR(charger->reg)) { > + dev_err(&pdev->dev, "couldn't get charger regulator\n"); > + return PTR_ERR(charger->reg); > + } > +
On Tue, 22 Dec 2020 09:40:04 +0100, Krzysztof Kozlowski wrote: > On Tue, Dec 22, 2020 at 07:31:40AM +0000, Timon Baetz wrote: > > Register for extcon notification and set charging current depending on > > the detected cable type. Current values are taken from vendor kernel, > > where most charger types end up setting 650mA [0]. > > > > Also enable and disable the CHARGER regulator based on extcon events. > > > > [0] https://github.com/krzk/linux-vendor-backup/blob/samsung/galaxy-s2-epic-4g-touch-sph-d710-exynos4210-dump/drivers/misc/max8997-muic.c#L1675-L1678 > > > > Signed-off-by: Timon Baetz <timon.baetz@protonmail.com> > > --- > > drivers/power/supply/max8997_charger.c | 94 ++++++++++++++++++++++++++ > > 1 file changed, 94 insertions(+) > > > > diff --git a/drivers/power/supply/max8997_charger.c b/drivers/power/supply/max8997_charger.c > > index 1947af25879a..673ffff14ae0 100644 > > --- a/drivers/power/supply/max8997_charger.c > > +++ b/drivers/power/supply/max8997_charger.c > > @@ -6,12 +6,14 @@ > > // MyungJoo Ham <myungjoo.ham@samsung.com> > > > > #include <linux/err.h> > > +#include <linux/extcon.h> > > #include <linux/module.h> > > #include <linux/slab.h> > > #include <linux/platform_device.h> > > #include <linux/power_supply.h> > > #include <linux/mfd/max8997.h> > > #include <linux/mfd/max8997-private.h> > > +#include <linux/regulator/consumer.h> > > > > /* MAX8997_REG_STATUS4 */ > > #define DCINOK_SHIFT 1 > > @@ -31,6 +33,10 @@ struct charger_data { > > struct device *dev; > > struct max8997_dev *iodev; > > struct power_supply *battery; > > + struct regulator *reg; > > + struct extcon_dev *edev; > > + struct notifier_block extcon_nb; > > + struct work_struct extcon_work; > > }; > > > > static enum power_supply_property max8997_battery_props[] = { > > @@ -88,6 +94,67 @@ static int max8997_battery_get_property(struct power_supply *psy, > > return 0; > > } > > > > +static void max8997_battery_extcon_evt_stop_work(void *data) > > +{ > > + struct charger_data *charger = data; > > + > > + cancel_work_sync(&charger->extcon_work); > > +} > > + > > +static void max8997_battery_extcon_evt_worker(struct work_struct *work) > > +{ > > + struct charger_data *charger = > > + container_of(work, struct charger_data, extcon_work); > > + struct extcon_dev *edev = charger->edev; > > + int current_limit; > > + > > + if (extcon_get_state(edev, EXTCON_CHG_USB_SDP) > 0) { > > + dev_dbg(charger->dev, "USB SDP charger is connected\n"); > > + current_limit = 450000; > > + } else if (extcon_get_state(edev, EXTCON_CHG_USB_DCP) > 0) { > > + dev_dbg(charger->dev, "USB DCP charger is connected\n"); > > + current_limit = 650000; > > + } else if (extcon_get_state(edev, EXTCON_CHG_USB_FAST) > 0) { > > + dev_dbg(charger->dev, "USB FAST charger is connected\n"); > > + current_limit = 650000; > > + } else if (extcon_get_state(edev, EXTCON_CHG_USB_SLOW) > 0) { > > + dev_dbg(charger->dev, "USB SLOW charger is connected\n"); > > + current_limit = 650000; > > + } else if (extcon_get_state(edev, EXTCON_CHG_USB_CDP) > 0) { > > + dev_dbg(charger->dev, "USB CDP charger is connected\n"); > > + current_limit = 650000; > > + } else { > > + dev_dbg(charger->dev, "USB charger is diconnected\n"); > > + current_limit = -1; > > + } > > + > > + if (current_limit > 0) { > > + int ret = regulator_set_current_limit(charger->reg, current_limit, current_limit); > > + > > + if (ret) { > > + dev_err(charger->dev, "failed to set current limit: %d\n", ret); > > + return; > > + } > > + ret = regulator_enable(charger->reg); > > + if (ret) > > + dev_err(charger->dev, "failed to enable regulator: %d\n", ret); > > + } else { > > + int ret = regulator_disable(charger->reg); > > + > > + if (ret) > > + dev_err(charger->dev, "failed to disable regulator: %d\n", ret); > > + } > > +} > > + > > +static int max8997_battery_extcon_evt(struct notifier_block *nb, > > + unsigned long event, void *param) > > +{ > > + struct charger_data *charger = > > + container_of(nb, struct charger_data, extcon_nb); > > + schedule_work(&charger->extcon_work); > > + return NOTIFY_OK; > > +} > > + > > static const struct power_supply_desc max8997_battery_desc = { > > .name = "max8997_pmic", > > .type = POWER_SUPPLY_TYPE_BATTERY, > > @@ -170,6 +237,33 @@ static int max8997_battery_probe(struct platform_device *pdev) > > return PTR_ERR(charger->battery); > > } > > > > + charger->reg = devm_regulator_get(&pdev->dev, "charger"); > > The code looks good but isn't it breaking all existing platforms? So there is 2 other DTS in the kernel sources that are using MAX8997 pmic: - Insignal Origen evaluation board - Samsung Trats Non of them have charging regulators. Also probing of the charger has been failing for long time because of https://lore.kernel.org/lkml/20201109194251.562203-2-timon.baetz@protonmail.com/ but that seems to land in 5.11. That being said, I guess I could make extcon and charger-supply optional if you prefer. Thanks again for reviewing, Timon
On Wed, Dec 23, 2020 at 08:09:55AM +0000, Timon Baetz wrote: > On Tue, 22 Dec 2020 09:40:04 +0100, Krzysztof Kozlowski wrote: (...) > > > .name = "max8997_pmic", > > > .type = POWER_SUPPLY_TYPE_BATTERY, > > > @@ -170,6 +237,33 @@ static int max8997_battery_probe(struct platform_device *pdev) > > > return PTR_ERR(charger->battery); > > > } > > > > > > + charger->reg = devm_regulator_get(&pdev->dev, "charger"); > > > > The code looks good but isn't it breaking all existing platforms? > > So there is 2 other DTS in the kernel sources that are using MAX8997 > pmic: > - Insignal Origen evaluation board > - Samsung Trats > Non of them have charging regulators. But still the power supply was probing on them (if not the error you mentioned). Now, the charger will fail. > Also probing of the charger has been failing for long time because of > https://lore.kernel.org/lkml/20201109194251.562203-2-timon.baetz@protonmail.com/ > but that seems to land in 5.11. That's a good argument supporting introduced breakage. Use it in commit message. Don't hide such information. > That being said, I guess I could make extcon and charger-supply > optional if you prefer. Since at least two boards will loose now power supply, I don't think you have a choice. Best regards, Krzysztof
diff --git a/drivers/power/supply/max8997_charger.c b/drivers/power/supply/max8997_charger.c index 1947af25879a..673ffff14ae0 100644 --- a/drivers/power/supply/max8997_charger.c +++ b/drivers/power/supply/max8997_charger.c @@ -6,12 +6,14 @@ // MyungJoo Ham <myungjoo.ham@samsung.com> #include <linux/err.h> +#include <linux/extcon.h> #include <linux/module.h> #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/power_supply.h> #include <linux/mfd/max8997.h> #include <linux/mfd/max8997-private.h> +#include <linux/regulator/consumer.h> /* MAX8997_REG_STATUS4 */ #define DCINOK_SHIFT 1 @@ -31,6 +33,10 @@ struct charger_data { struct device *dev; struct max8997_dev *iodev; struct power_supply *battery; + struct regulator *reg; + struct extcon_dev *edev; + struct notifier_block extcon_nb; + struct work_struct extcon_work; }; static enum power_supply_property max8997_battery_props[] = { @@ -88,6 +94,67 @@ static int max8997_battery_get_property(struct power_supply *psy, return 0; } +static void max8997_battery_extcon_evt_stop_work(void *data) +{ + struct charger_data *charger = data; + + cancel_work_sync(&charger->extcon_work); +} + +static void max8997_battery_extcon_evt_worker(struct work_struct *work) +{ + struct charger_data *charger = + container_of(work, struct charger_data, extcon_work); + struct extcon_dev *edev = charger->edev; + int current_limit; + + if (extcon_get_state(edev, EXTCON_CHG_USB_SDP) > 0) { + dev_dbg(charger->dev, "USB SDP charger is connected\n"); + current_limit = 450000; + } else if (extcon_get_state(edev, EXTCON_CHG_USB_DCP) > 0) { + dev_dbg(charger->dev, "USB DCP charger is connected\n"); + current_limit = 650000; + } else if (extcon_get_state(edev, EXTCON_CHG_USB_FAST) > 0) { + dev_dbg(charger->dev, "USB FAST charger is connected\n"); + current_limit = 650000; + } else if (extcon_get_state(edev, EXTCON_CHG_USB_SLOW) > 0) { + dev_dbg(charger->dev, "USB SLOW charger is connected\n"); + current_limit = 650000; + } else if (extcon_get_state(edev, EXTCON_CHG_USB_CDP) > 0) { + dev_dbg(charger->dev, "USB CDP charger is connected\n"); + current_limit = 650000; + } else { + dev_dbg(charger->dev, "USB charger is diconnected\n"); + current_limit = -1; + } + + if (current_limit > 0) { + int ret = regulator_set_current_limit(charger->reg, current_limit, current_limit); + + if (ret) { + dev_err(charger->dev, "failed to set current limit: %d\n", ret); + return; + } + ret = regulator_enable(charger->reg); + if (ret) + dev_err(charger->dev, "failed to enable regulator: %d\n", ret); + } else { + int ret = regulator_disable(charger->reg); + + if (ret) + dev_err(charger->dev, "failed to disable regulator: %d\n", ret); + } +} + +static int max8997_battery_extcon_evt(struct notifier_block *nb, + unsigned long event, void *param) +{ + struct charger_data *charger = + container_of(nb, struct charger_data, extcon_nb); + schedule_work(&charger->extcon_work); + return NOTIFY_OK; +} + static const struct power_supply_desc max8997_battery_desc = { .name = "max8997_pmic", .type = POWER_SUPPLY_TYPE_BATTERY, @@ -170,6 +237,33 @@ static int max8997_battery_probe(struct platform_device *pdev) return PTR_ERR(charger->battery); } + charger->reg = devm_regulator_get(&pdev->dev, "charger"); + if (IS_ERR(charger->reg)) { + dev_err(&pdev->dev, "couldn't get charger regulator\n"); + return PTR_ERR(charger->reg); + } + + charger->edev = extcon_get_edev_by_phandle(&pdev->dev, 0); + if (IS_ERR(charger->edev)) { + if (PTR_ERR(charger->edev) != -EPROBE_DEFER) + dev_err(charger->dev, "couldn't get extcon device\n"); + return PTR_ERR(charger->edev); + } + + INIT_WORK(&charger->extcon_work, max8997_battery_extcon_evt_worker); + ret = devm_add_action(&pdev->dev, max8997_battery_extcon_evt_stop_work, charger); + if (ret) { + dev_err(&pdev->dev, "failed to add extcon evt stop action: %d\n", ret); + return ret; + } + charger->extcon_nb.notifier_call = max8997_battery_extcon_evt; + ret = devm_extcon_register_notifier_all(&pdev->dev, charger->edev, + &charger->extcon_nb); + if (ret) { + dev_err(&pdev->dev, "failed to register extcon notifier\n"); + return ret; + }; + return 0; }
Register for extcon notification and set charging current depending on the detected cable type. Current values are taken from vendor kernel, where most charger types end up setting 650mA [0]. Also enable and disable the CHARGER regulator based on extcon events. [0] https://github.com/krzk/linux-vendor-backup/blob/samsung/galaxy-s2-epic-4g-touch-sph-d710-exynos4210-dump/drivers/misc/max8997-muic.c#L1675-L1678 Signed-off-by: Timon Baetz <timon.baetz@protonmail.com> --- drivers/power/supply/max8997_charger.c | 94 ++++++++++++++++++++++++++ 1 file changed, 94 insertions(+)