| Message ID | 20211031234137.87070-2-paul@crapouillou.net (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 8e14b530f8c90346eab43c7b59b03ff9fec7d171 |
| Headers | show |
| Series | [v2,1/2] ARM: dts: exynos/i9100: Fix BCM4330 Bluetooth reset polarity | expand |
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts index 5f5d9b135736..76b1017e05e8 100644 --- a/arch/arm/boot/dts/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -829,7 +829,10 @@ bluetooth { shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpl1 0 GPIO_ACTIVE_LOW>; device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; + + interrupt-parent = <&gpx2>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wakeup"; }; };
Switch away from using the deprecated 'host-wakeup-gpios' property, and use a 'host-wakeup' interrupt instead, as suggested by the binding documentation. Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- arch/arm/boot/dts/exynos4210-i9100.dts | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)