| Message ID | 20211107202943.8859-3-semen.protsenko@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | watchdog: s3c2410: Add Exynos850 support | expand |
On 07/11/2021 21:29, Sam Protsenko wrote: > Exynos850 SoC has two CPU clusters: > - cluster 0: contains CPUs #0, #1, #2, #3 > - cluster 1: contains CPUs #4, #5, #6, #7 > > Each cluster has its own dedicated watchdog timer. Those WDT instances > are controlled using different bits in PMU registers, new > "samsung,index" property is added to tell the driver which bits to use > for defined watchdog node. > > Also on Exynos850 the peripheral clock and the source clock are two > different clocks. Provide a way to specify two clocks in watchdog device > tree node. > > Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> > --- > Changes in v3: > - Renamed "samsung,index" property to more descriptive > "samsung,cluster-index" > - Disabled "samsung,cluster-index" property for SoCs other than > Exynos850 > > Changes in v2: > - Stated explicitly that Exynos850 driver requires 2 clocks > - Used single compatible for Exynos850 > - Added "index" property to specify CPU cluster index > - Fixed a typo in commit message: dedicater -> dedicated > > .../bindings/watchdog/samsung-wdt.yaml | 45 +++++++++++++++++-- > 1 file changed, 41 insertions(+), 4 deletions(-) > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Best regards, Krzysztof
On Sun, 07 Nov 2021 22:29:33 +0200, Sam Protsenko wrote: > Exynos850 SoC has two CPU clusters: > - cluster 0: contains CPUs #0, #1, #2, #3 > - cluster 1: contains CPUs #4, #5, #6, #7 > > Each cluster has its own dedicated watchdog timer. Those WDT instances > are controlled using different bits in PMU registers, new > "samsung,index" property is added to tell the driver which bits to use > for defined watchdog node. > > Also on Exynos850 the peripheral clock and the source clock are two > different clocks. Provide a way to specify two clocks in watchdog device > tree node. > > Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> > --- > Changes in v3: > - Renamed "samsung,index" property to more descriptive > "samsung,cluster-index" > - Disabled "samsung,cluster-index" property for SoCs other than > Exynos850 > > Changes in v2: > - Stated explicitly that Exynos850 driver requires 2 clocks > - Used single compatible for Exynos850 > - Added "index" property to specify CPU cluster index > - Fixed a typo in commit message: dedicater -> dedicated > > .../bindings/watchdog/samsung-wdt.yaml | 45 +++++++++++++++++-- > 1 file changed, 41 insertions(+), 4 deletions(-) > Reviewed-by: Rob Herring <robh@kernel.org>
On Sun, Nov 07, 2021 at 10:29:33PM +0200, Sam Protsenko wrote: > Exynos850 SoC has two CPU clusters: > - cluster 0: contains CPUs #0, #1, #2, #3 > - cluster 1: contains CPUs #4, #5, #6, #7 > > Each cluster has its own dedicated watchdog timer. Those WDT instances > are controlled using different bits in PMU registers, new > "samsung,index" property is added to tell the driver which bits to use > for defined watchdog node. > > Also on Exynos850 the peripheral clock and the source clock are two > different clocks. Provide a way to specify two clocks in watchdog device > tree node. > > Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> > --- > Changes in v3: > - Renamed "samsung,index" property to more descriptive > "samsung,cluster-index" > - Disabled "samsung,cluster-index" property for SoCs other than > Exynos850 > > Changes in v2: > - Stated explicitly that Exynos850 driver requires 2 clocks > - Used single compatible for Exynos850 > - Added "index" property to specify CPU cluster index > - Fixed a typo in commit message: dedicater -> dedicated > > .../bindings/watchdog/samsung-wdt.yaml | 45 +++++++++++++++++-- > 1 file changed, 41 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml > index 93cd77a6e92c..b08373336b16 100644 > --- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml > +++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml > @@ -22,25 +22,32 @@ properties: > - samsung,exynos5250-wdt # for Exynos5250 > - samsung,exynos5420-wdt # for Exynos5420 > - samsung,exynos7-wdt # for Exynos7 > + - samsung,exynos850-wdt # for Exynos850 > > reg: > maxItems: 1 > > clocks: > - maxItems: 1 > + minItems: 1 > + maxItems: 2 > > clock-names: > - items: > - - const: watchdog > + minItems: 1 > + maxItems: 2 > > interrupts: > maxItems: 1 > > + samsung,cluster-index: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Index of CPU cluster on which watchdog is running (in case of Exynos850) > + > samsung,syscon-phandle: > $ref: /schemas/types.yaml#/definitions/phandle > description: > Phandle to the PMU system controller node (in case of Exynos5250, > - Exynos5420 and Exynos7). > + Exynos5420, Exynos7 and Exynos850). > > required: > - compatible > @@ -59,9 +66,39 @@ allOf: > - samsung,exynos5250-wdt > - samsung,exynos5420-wdt > - samsung,exynos7-wdt > + - samsung,exynos850-wdt > then: > required: > - samsung,syscon-phandle > + - if: > + properties: > + compatible: > + contains: > + enum: > + - samsung,exynos850-wdt > + then: > + properties: > + clocks: > + items: > + - description: Bus clock, used for register interface > + - description: Source clock (driving watchdog counter) > + clock-names: > + items: > + - const: watchdog > + - const: watchdog_src > + samsung,cluster-index: > + enum: [0, 1] > + required: > + - samsung,cluster-index > + else: > + properties: > + clocks: > + items: > + - description: Bus clock, which is also a source clock > + clock-names: > + items: > + - const: watchdog > + samsung,cluster-index: false > > unevaluatedProperties: false > > -- > 2.30.2 >
diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml index 93cd77a6e92c..b08373336b16 100644 --- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml @@ -22,25 +22,32 @@ properties: - samsung,exynos5250-wdt # for Exynos5250 - samsung,exynos5420-wdt # for Exynos5420 - samsung,exynos7-wdt # for Exynos7 + - samsung,exynos850-wdt # for Exynos850 reg: maxItems: 1 clocks: - maxItems: 1 + minItems: 1 + maxItems: 2 clock-names: - items: - - const: watchdog + minItems: 1 + maxItems: 2 interrupts: maxItems: 1 + samsung,cluster-index: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Index of CPU cluster on which watchdog is running (in case of Exynos850) + samsung,syscon-phandle: $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to the PMU system controller node (in case of Exynos5250, - Exynos5420 and Exynos7). + Exynos5420, Exynos7 and Exynos850). required: - compatible @@ -59,9 +66,39 @@ allOf: - samsung,exynos5250-wdt - samsung,exynos5420-wdt - samsung,exynos7-wdt + - samsung,exynos850-wdt then: required: - samsung,syscon-phandle + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos850-wdt + then: + properties: + clocks: + items: + - description: Bus clock, used for register interface + - description: Source clock (driving watchdog counter) + clock-names: + items: + - const: watchdog + - const: watchdog_src + samsung,cluster-index: + enum: [0, 1] + required: + - samsung,cluster-index + else: + properties: + clocks: + items: + - description: Bus clock, which is also a source clock + clock-names: + items: + - const: watchdog + samsung,cluster-index: false unevaluatedProperties: false
Exynos850 SoC has two CPU clusters: - cluster 0: contains CPUs #0, #1, #2, #3 - cluster 1: contains CPUs #4, #5, #6, #7 Each cluster has its own dedicated watchdog timer. Those WDT instances are controlled using different bits in PMU registers, new "samsung,index" property is added to tell the driver which bits to use for defined watchdog node. Also on Exynos850 the peripheral clock and the source clock are two different clocks. Provide a way to specify two clocks in watchdog device tree node. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> --- Changes in v3: - Renamed "samsung,index" property to more descriptive "samsung,cluster-index" - Disabled "samsung,cluster-index" property for SoCs other than Exynos850 Changes in v2: - Stated explicitly that Exynos850 driver requires 2 clocks - Used single compatible for Exynos850 - Added "index" property to specify CPU cluster index - Fixed a typo in commit message: dedicater -> dedicated .../bindings/watchdog/samsung-wdt.yaml | 45 +++++++++++++++++-- 1 file changed, 41 insertions(+), 4 deletions(-)