@@ -539,6 +539,53 @@ static int dw_mci_exynos_prepare_hs400_tuning(struct dw_mci *host,
return 0;
}
+static void dw_mci_exynos_set_data_timeout(struct dw_mci *host,
+ unsigned int timeout_ns)
+{
+ u32 clk_div, tmout;
+ u64 tmp;
+ unsigned int tmp2;
+
+ clk_div = (mci_readl(host, CLKDIV) & 0xFF) * 2;
+ if (clk_div == 0)
+ clk_div = 1;
+
+ tmp = DIV_ROUND_UP_ULL((u64)timeout_ns * host->bus_hz, NSEC_PER_SEC);
+ tmp = DIV_ROUND_UP_ULL(tmp, clk_div);
+
+ /* TMOUT[7:0] (RESPONSE_TIMEOUT) */
+ tmout = 0xFF; /* Set maximum */
+
+ /*
+ * Extended HW timer (max = 0x6FFFFF2):
+ * ((TMOUT[10:8] - 1) * 0xFFFFFF + TMOUT[31:11] * 8)
+ */
+ if (!tmp || tmp > 0x6FFFFF2)
+ tmout |= (0xFFFFFF << 8);
+ else {
+ /* TMOUT[10:8] */
+ tmp2 = (((unsigned int)tmp / 0xFFFFFF) + 1) & 0x7;
+ tmout |= tmp2 << 8;
+
+ /* TMOUT[31:11] */
+ tmp = tmp - ((tmp2 - 1) * 0xFFFFFF);
+ tmout |= (tmp & 0xFFFFF8) << 8;
+ }
+
+ mci_writel(host, TMOUT, tmout);
+ dev_dbg(host->dev, "timeout_ns: %u => TMOUT[31:8]: 0x%#08x",
+ timeout_ns, tmout >> 8);
+}
+
+static u32 dw_mci_exynos_get_drto_clks(struct dw_mci *host)
+{
+ u32 drto_clks;
+
+ drto_clks = mci_readl(host, TMOUT) >> 8;
+
+ return (((drto_clks & 0x7) - 1) * 0xFFFFFF) + ((drto_clks & 0xFFFFF8));
+}
+
/* Common capabilities of Exynos4/Exynos5 SoC */
static unsigned long exynos_dwmmc_caps[4] = {
MMC_CAP_1_8V_DDR | MMC_CAP_8_BIT_DATA,
@@ -564,6 +611,8 @@ static const struct dw_mci_drv_data artpec_drv_data = {
.set_ios = dw_mci_exynos_set_ios,
.parse_dt = dw_mci_exynos_parse_dt,
.execute_tuning = dw_mci_exynos_execute_tuning,
+ .set_data_timeout = dw_mci_exynos_set_data_timeout,
+ .get_drto_clks = dw_mci_exynos_get_drto_clks,
};
static const struct of_device_id dw_mci_exynos_match[] = {
@@ -1287,9 +1287,13 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
static void dw_mci_set_data_timeout(struct dw_mci *host,
unsigned int timeout_ns)
{
+ const struct dw_mci_drv_data *drv_data = host->drv_data;
u32 clk_div, tmout;
u64 tmp;
+ if (drv_data && drv_data->set_data_timeout)
+ return drv_data->set_data_timeout(host, timeout_ns);
+
clk_div = (mci_readl(host, CLKDIV) & 0xFF) * 2;
if (clk_div == 0)
clk_div = 1;
@@ -1995,12 +1999,16 @@ static int dw_mci_data_complete(struct dw_mci *host, struct mmc_data *data)
static void dw_mci_set_drto(struct dw_mci *host)
{
+ const struct dw_mci_drv_data *drv_data = host->drv_data;
unsigned int drto_clks;
unsigned int drto_div;
unsigned int drto_ms;
unsigned long irqflags;
- drto_clks = mci_readl(host, TMOUT) >> 8;
+ if (drv_data && drv_data->get_drto_clks)
+ drto_clks = drv_data->get_drto_clks(host);
+ else
+ drto_clks = mci_readl(host, TMOUT) >> 8;
drto_div = (mci_readl(host, CLKDIV) & 0xff) * 2;
if (drto_div == 0)
drto_div = 1;
@@ -2008,6 +2016,8 @@ static void dw_mci_set_drto(struct dw_mci *host)
drto_ms = DIV_ROUND_UP_ULL((u64)MSEC_PER_SEC * drto_clks * drto_div,
host->bus_hz);
+ dev_dbg(host->dev, "drto_ms: %u\n", drto_ms);
+
/* add a bit spare time */
drto_ms += 10;
@@ -556,6 +556,8 @@ struct dw_mci_slot {
* @set_ios: handle bus specific extensions.
* @parse_dt: parse implementation specific device tree properties.
* @execute_tuning: implementation specific tuning procedure.
+ * @set_data_timeout: implementation specific timeout.
+ * @get_drto_clks: implementation specific cycle count for data read timeout.
*
* Provide controller implementation specific extensions. The usage of this
* data structure is fully optional and usage of each member in this structure
@@ -573,5 +575,8 @@ struct dw_mci_drv_data {
struct mmc_ios *ios);
int (*switch_voltage)(struct mmc_host *mmc,
struct mmc_ios *ios);
+ void (*set_data_timeout)(struct dw_mci *host,
+ unsigned int timeout_ns);
+ u32 (*get_drto_clks)(struct dw_mci *host);
};
#endif /* _DW_MMC_H_ */
Current dw_mci driver supports a TMOUT register which consists of a 24 bit field (TMOUT[31:8]) for the DATA_TIMEOUT. The maximum value of this field is 0xFFFFFF, which with a 200MHz clock will give a full DRTO of: 0xFFFFFF / 200000000 => ~84 ms However, the ARTPEC-8 SoC DWMMC IP version has a TMOUT register with an extended DATA_TIMEOUT field, which supports longer timers for the DRTO. In this version the DATA_TIMEOUT field is split into two, which with the same 200MHz clock as above will allow a maximum timeout of: ((TMOUT[10:8] -1) * 0xFFFFFF + TMOUT[31:11] * 8) / 200000000 => ~587 ms Add driver callbacks for implementation specific data timeout, and implement callback functions for the ARTPEC-8 SoC. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> --- v2: - Removed unnecessary comment - Change 1<<0 to BIT(0) v3: - Add callback for implementation specific control of data timeout - Add callback for implementation specific read of cycle count for data timeout. - Remove definition and use of DW_MMC_QUIRK_EXTENDED_TMOUT. drivers/mmc/host/dw_mmc-exynos.c | 49 ++++++++++++++++++++++++++++++++ drivers/mmc/host/dw_mmc.c | 12 +++++++- drivers/mmc/host/dw_mmc.h | 5 ++++ 3 files changed, 65 insertions(+), 1 deletion(-)