diff mbox series

[1/2] pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt

Message ID 20211224145748.18754-2-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive)
State New
Headers show
Series [1/2] pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt | expand

Commit Message

Prabhakar Mahadev Lad Dec. 24, 2021, 2:57 p.m. UTC
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_optional().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/pinctrl/samsung/pinctrl-samsung.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

Comments

Krzysztof Kozlowski Dec. 25, 2021, 10:18 a.m. UTC | #1
On Fri, 24 Dec 2021 14:57:47 +0000, Lad Prabhakar wrote:
> platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> allocation of IRQ resources in DT core code, this causes an issue
> when using hierarchical interrupt domains using "interrupts" property
> in the node as this bypasses the hierarchical setup and messes up the
> irq chaining.
> 
> In preparation for removal of static setup of IRQ resource from DT core
> code use platform_get_irq_optional().
> 
> [...]

Applied, thanks!

[1/2] pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt
      commit: a382d568f144b9e533ad210117c6c50d8dbdcaf1

Best regards,
Andy Shevchenko Dec. 25, 2021, 3:34 p.m. UTC | #2
On Sat, Dec 25, 2021 at 3:59 AM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
>
> platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> allocation of IRQ resources in DT core code, this causes an issue
> when using hierarchical interrupt domains using "interrupts" property
> in the node as this bypasses the hierarchical setup and messes up the
> irq chaining.
>
> In preparation for removal of static setup of IRQ resource from DT core
> code use platform_get_irq_optional().

> +       ret = platform_get_irq_optional(pdev, 0);
> +       if (ret < 0 && ret != -ENXIO)
> +               return ret;
> +       if (ret > 0)
> +               drvdata->irq = ret;

Yes, this is how platform_get_irq_optional() is expected to be used
right now. We are going to fix it a bit, so this code won't be
affected.
diff mbox series

Patch

diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index 8941f658e7f1..0f6e9305fec5 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -1095,7 +1095,6 @@  static int samsung_pinctrl_probe(struct platform_device *pdev)
 	struct samsung_pinctrl_drv_data *drvdata;
 	const struct samsung_pin_ctrl *ctrl;
 	struct device *dev = &pdev->dev;
-	struct resource *res;
 	int ret;
 
 	drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
@@ -1109,9 +1108,11 @@  static int samsung_pinctrl_probe(struct platform_device *pdev)
 	}
 	drvdata->dev = dev;
 
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (res)
-		drvdata->irq = res->start;
+	ret = platform_get_irq_optional(pdev, 0);
+	if (ret < 0 && ret != -ENXIO)
+		return ret;
+	if (ret > 0)
+		drvdata->irq = ret;
 
 	if (ctrl->retention_data) {
 		drvdata->retention_ctrl = ctrl->retention_data->init(drvdata,