| Message ID | 20211229160245.1338-6-jszhang@kernel.org (mailing list archive) |
|---|---|
| State | Rejected |
| Headers | show |
| Series | arm/arm64: dts: Remove unused num-viewport from pcie node | expand |
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi index adbfecc678b5..860912e47732 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi @@ -180,7 +180,6 @@ &cp0_pcie0 { pinctrl-names = "default"; pinctrl-0 = <&cp0_pcie_pins>; num-lanes = <4>; - num-viewport = <8>; reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts index dac85fa748de..c5ba03c2194d 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts @@ -330,7 +330,6 @@ &cp0_pcie0 { pinctrl-names = "default"; pinctrl-0 = <&cp0_pcie_pins>; num-lanes = <1>; - num-viewport = <8>; reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; phys = <&cp0_comphy0 0>; diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb-A.dts b/arch/arm64/boot/dts/marvell/cn9130-crb-A.dts index a7b6dfba8af5..ccb48d81604a 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-crb-A.dts +++ b/arch/arm64/boot/dts/marvell/cn9130-crb-A.dts @@ -12,7 +12,6 @@ / { &cp0_pcie0 { status = "okay"; num-lanes = <4>; - num-viewport = <8>; /* Generic PHY, providing serdes lanes */ phys = <&cp0_comphy0 0 &cp0_comphy1 0 diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts b/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts index 0904cb0309ae..4c68c8c310ae 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts +++ b/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts @@ -12,7 +12,6 @@ / { &cp0_pcie0 { status = "okay"; num-lanes = <1>; - num-viewport = <8>; /* Generic PHY, providing serdes lanes */ phys = <&cp0_comphy0 0>; iommu-map = diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi index c00b69b88bd2..54f40674808b 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi @@ -271,7 +271,6 @@ partition@1000000 { &cp0_pcie0 { status = "okay"; num-lanes = <4>; - num-viewport = <8>; /* Generic PHY, providing serdes lanes */ phys = <&cp0_comphy0 0 &cp0_comphy1 0 diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi index f995b1bcda01..ccf162fa751b 100644 --- a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi @@ -112,7 +112,6 @@ &cp1_pcie0 { pinctrl-names = "default"; pinctrl-0 = <&cp1_pcie_reset_pins>; num-lanes = <2>; - num-viewport = <8>; marvell,reset-gpio = <&cp1_gpio1 0 GPIO_ACTIVE_HIGH>; status = "okay"; /* Generic PHY, providing serdes lanes */ diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi index 3f1795fb4fe7..be96d5f3398e 100644 --- a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi @@ -153,7 +153,6 @@ cp2_module_expander1: pca9555@21 { &cp2_pcie0 { status = "okay"; num-lanes = <2>; - num-viewport = <8>; /* Generic PHY, providing serdes lanes */ phys = <&cp2_comphy0 0 &cp2_comphy1 0>; @@ -163,7 +162,6 @@ &cp2_pcie0 { &cp2_pcie2 { status = "okay"; num-lanes = <1>; - num-viewport = <8>; /* Generic PHY, providing serdes lanes */ phys = <&cp2_comphy5 2>; };
After commit 281f1f99cf3a("PCI: dwc: Detect number of iATU windows"), the number of iATU windows is detected at runtime, what's more, the 'num-viewport' property parsing has been removed, so remove the unused num-viewport from pcie nodes. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> --- arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi | 1 - arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts | 1 - arch/arm64/boot/dts/marvell/cn9130-crb-A.dts | 1 - arch/arm64/boot/dts/marvell/cn9130-crb-B.dts | 1 - arch/arm64/boot/dts/marvell/cn9130-db.dtsi | 1 - arch/arm64/boot/dts/marvell/cn9131-db.dtsi | 1 - arch/arm64/boot/dts/marvell/cn9132-db.dtsi | 2 -- 7 files changed, 8 deletions(-)