diff mbox series

[02/24] pinctrl: samsung: accept GPIO bank nodes with a suffix

Message ID 20211231161930.256733-3-krzysztof.kozlowski@canonical.com (mailing list archive)
State Superseded
Headers show
Series pinctrl: dt-bindings: samsung: convert to dtschema | expand

Commit Message

Krzysztof Kozlowski Dec. 31, 2021, 4:19 p.m. UTC
Existing dt-bindings expected that each GPIO/pin bank within pin
controller has its own node with name matching the bank (e.g. gpa0,
gpx2) and "gpio-controller" property.  The node name is then used for
matching between driver data and DTS.

Newly introduced dtschema expects to have nodes ending with "-gpio-bank"
suffix, so rewrite bank-devicetree matching to look for old and new
style of naming.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
 drivers/pinctrl/samsung/pinctrl-samsung.c | 57 ++++++++++++++++++-----
 1 file changed, 45 insertions(+), 12 deletions(-)

Comments

Sam Protsenko Jan. 3, 2022, 6:43 p.m. UTC | #1
On Fri, 31 Dec 2021 at 18:20, Krzysztof Kozlowski
<krzysztof.kozlowski@canonical.com> wrote:
>
> Existing dt-bindings expected that each GPIO/pin bank within pin
> controller has its own node with name matching the bank (e.g. gpa0,
> gpx2) and "gpio-controller" property.  The node name is then used for
> matching between driver data and DTS.
>
> Newly introduced dtschema expects to have nodes ending with "-gpio-bank"
> suffix, so rewrite bank-devicetree matching to look for old and new
> style of naming.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> ---
>  drivers/pinctrl/samsung/pinctrl-samsung.c | 57 ++++++++++++++++++-----
>  1 file changed, 45 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
> index f2864a7869b3..561853df8ef7 100644
> --- a/drivers/pinctrl/samsung/pinctrl-samsung.c
> +++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
> @@ -1011,13 +1011,56 @@ static void samsung_banks_of_node_put(struct samsung_pinctrl_drv_data *d)
>                 of_node_put(bank->of_node);
>  }
>
> +/*
> + * Iterate over all driver pin banks to find one matching the name of node,
> + * skipping optional "-gpio" node suffix. When found, assign node to the bank.
> + */
> +static void samsung_banks_of_node_get(struct device *dev,
> +                                     struct samsung_pinctrl_drv_data *d,
> +                                     struct device_node *node)
> +{
> +       const char *suffix = "-gpio-bank";
> +       struct samsung_pin_bank *bank;
> +       struct device_node *child;
> +       /* Pin bank names are up to 4 characters */
> +       char node_name[20];
> +       unsigned int i;
> +       size_t len;
> +
> +       bank = d->pin_banks;
> +       for (i = 0; i < d->nr_banks; ++i, ++bank) {
> +               strscpy(node_name, bank->name, sizeof(node_name));
> +               len = strlcat(node_name, suffix, sizeof(node_name));
> +               if (len == sizeof(sizeof(node_name))) {

Double sizeof is probably wrong?

> +                       dev_err(dev, "Too long pin bank name '%s', ignoring\n",
> +                               bank->name);
> +                       continue;
> +               }
> +
> +               for_each_child_of_node(node, child) {
> +                       if (!of_find_property(child, "gpio-controller", NULL))
> +                               continue;
> +                       if (of_node_name_eq(child, node_name))
> +                               break;
> +                       else if (of_node_name_eq(child, bank->name))
> +                               break;
> +               }
> +
> +               if (child)
> +                       bank->of_node = child;
> +               else
> +                       dev_warn(dev, "Missing node for bank %s - invalid DTB\n",
> +                                bank->name);
> +               /* child reference dropped in samsung_drop_banks_of_node() */
> +       }
> +}
> +
>  /* retrieve the soc specific data */
>  static const struct samsung_pin_ctrl *
>  samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d,
>                              struct platform_device *pdev)
>  {
>         struct device_node *node = pdev->dev.of_node;
> -       struct device_node *np;
>         const struct samsung_pin_bank_data *bdata;
>         const struct samsung_pin_ctrl *ctrl;
>         struct samsung_pin_bank *bank;
> @@ -1081,17 +1124,7 @@ samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d,
>          */
>         d->virt_base = virt_base[0];
>
> -       for_each_child_of_node(node, np) {
> -               if (!of_find_property(np, "gpio-controller", NULL))
> -                       continue;
> -               bank = d->pin_banks;
> -               for (i = 0; i < d->nr_banks; ++i, ++bank) {
> -                       if (of_node_name_eq(np, bank->name)) {
> -                               bank->of_node = np;
> -                               break;
> -                       }
> -               }
> -       }
> +       samsung_banks_of_node_get(&pdev->dev, d, node);
>
>         d->pin_base = pin_base;
>         pin_base += d->nr_pins;
> --
> 2.32.0
>
Krzysztof Kozlowski Jan. 5, 2022, 8:31 p.m. UTC | #2
On 03/01/2022 19:43, Sam Protsenko wrote:
> On Fri, 31 Dec 2021 at 18:20, Krzysztof Kozlowski
> <krzysztof.kozlowski@canonical.com> wrote:
>>
>> Existing dt-bindings expected that each GPIO/pin bank within pin
>> controller has its own node with name matching the bank (e.g. gpa0,
>> gpx2) and "gpio-controller" property.  The node name is then used for
>> matching between driver data and DTS.
>>
>> Newly introduced dtschema expects to have nodes ending with "-gpio-bank"
>> suffix, so rewrite bank-devicetree matching to look for old and new
>> style of naming.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
>> ---
>>  drivers/pinctrl/samsung/pinctrl-samsung.c | 57 ++++++++++++++++++-----
>>  1 file changed, 45 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
>> index f2864a7869b3..561853df8ef7 100644
>> --- a/drivers/pinctrl/samsung/pinctrl-samsung.c
>> +++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
>> @@ -1011,13 +1011,56 @@ static void samsung_banks_of_node_put(struct samsung_pinctrl_drv_data *d)
>>                 of_node_put(bank->of_node);
>>  }
>>
>> +/*
>> + * Iterate over all driver pin banks to find one matching the name of node,
>> + * skipping optional "-gpio" node suffix. When found, assign node to the bank.
>> + */
>> +static void samsung_banks_of_node_get(struct device *dev,
>> +                                     struct samsung_pinctrl_drv_data *d,
>> +                                     struct device_node *node)
>> +{
>> +       const char *suffix = "-gpio-bank";
>> +       struct samsung_pin_bank *bank;
>> +       struct device_node *child;
>> +       /* Pin bank names are up to 4 characters */
>> +       char node_name[20];
>> +       unsigned int i;
>> +       size_t len;
>> +
>> +       bank = d->pin_banks;
>> +       for (i = 0; i < d->nr_banks; ++i, ++bank) {
>> +               strscpy(node_name, bank->name, sizeof(node_name));
>> +               len = strlcat(node_name, suffix, sizeof(node_name));
>> +               if (len == sizeof(sizeof(node_name))) {
> 
> Double sizeof is probably wrong?

Thanks, copy-paste error... it should be also "len >= sizeof".


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index f2864a7869b3..561853df8ef7 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -1011,13 +1011,56 @@  static void samsung_banks_of_node_put(struct samsung_pinctrl_drv_data *d)
 		of_node_put(bank->of_node);
 }
 
+/*
+ * Iterate over all driver pin banks to find one matching the name of node,
+ * skipping optional "-gpio" node suffix. When found, assign node to the bank.
+ */
+static void samsung_banks_of_node_get(struct device *dev,
+				      struct samsung_pinctrl_drv_data *d,
+				      struct device_node *node)
+{
+	const char *suffix = "-gpio-bank";
+	struct samsung_pin_bank *bank;
+	struct device_node *child;
+	/* Pin bank names are up to 4 characters */
+	char node_name[20];
+	unsigned int i;
+	size_t len;
+
+	bank = d->pin_banks;
+	for (i = 0; i < d->nr_banks; ++i, ++bank) {
+		strscpy(node_name, bank->name, sizeof(node_name));
+		len = strlcat(node_name, suffix, sizeof(node_name));
+		if (len == sizeof(sizeof(node_name))) {
+			dev_err(dev, "Too long pin bank name '%s', ignoring\n",
+				bank->name);
+			continue;
+		}
+
+		for_each_child_of_node(node, child) {
+			if (!of_find_property(child, "gpio-controller", NULL))
+				continue;
+			if (of_node_name_eq(child, node_name))
+				break;
+			else if (of_node_name_eq(child, bank->name))
+				break;
+		}
+
+		if (child)
+			bank->of_node = child;
+		else
+			dev_warn(dev, "Missing node for bank %s - invalid DTB\n",
+				 bank->name);
+		/* child reference dropped in samsung_drop_banks_of_node() */
+	}
+}
+
 /* retrieve the soc specific data */
 static const struct samsung_pin_ctrl *
 samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d,
 			     struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;
-	struct device_node *np;
 	const struct samsung_pin_bank_data *bdata;
 	const struct samsung_pin_ctrl *ctrl;
 	struct samsung_pin_bank *bank;
@@ -1081,17 +1124,7 @@  samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d,
 	 */
 	d->virt_base = virt_base[0];
 
-	for_each_child_of_node(node, np) {
-		if (!of_find_property(np, "gpio-controller", NULL))
-			continue;
-		bank = d->pin_banks;
-		for (i = 0; i < d->nr_banks; ++i, ++bank) {
-			if (of_node_name_eq(np, bank->name)) {
-				bank->of_node = np;
-				break;
-			}
-		}
-	}
+	samsung_banks_of_node_get(&pdev->dev, d, node);
 
 	d->pin_base = pin_base;
 	pin_base += d->nr_pins;