diff mbox series

[1/8] arm64: dts: exynos: add necessary clock inputs in Exynos7

Message ID 20220102115356.75796-1-krzysztof.kozlowski@canonical.com (mailing list archive)
State Accepted
Commit 372d171cd9b472cff7852211195f211150bc27d2
Headers show
Series [1/8] arm64: dts: exynos: add necessary clock inputs in Exynos7 | expand

Commit Message

Krzysztof Kozlowski Jan. 2, 2022, 11:53 a.m. UTC
Exynos7 devicetree bindings require more input clocks for TOP0 and
PERIC1 clock controllers, than already provided.  Existing DTS was not
matching the bindings, so let's update the DTS, even though the error
could be in the bindings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
 arch/arm64/boot/dts/exynos/exynos7.dtsi | 33 ++++++++++++++++++++-----
 1 file changed, 27 insertions(+), 6 deletions(-)

Comments

Krzysztof Kozlowski Jan. 23, 2022, 5:09 p.m. UTC | #1
On Sun, 2 Jan 2022 12:53:49 +0100, Krzysztof Kozlowski wrote:
> Exynos7 devicetree bindings require more input clocks for TOP0 and
> PERIC1 clock controllers, than already provided.  Existing DTS was not
> matching the bindings, so let's update the DTS, even though the error
> could be in the bindings.
> 
> 

Applied, thanks!

[1/8] arm64: dts: exynos: add necessary clock inputs in Exynos7
      commit: 372d171cd9b472cff7852211195f211150bc27d2

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index c3efbc8add38..3e53ff2be455 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -177,10 +177,11 @@  clock_top0: clock-controller@105d0000 {
 			clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>,
 				 <&clock_topc DOUT_SCLK_BUS1_PLL>,
 				 <&clock_topc DOUT_SCLK_CC_PLL>,
-				 <&clock_topc DOUT_SCLK_MFC_PLL>;
+				 <&clock_topc DOUT_SCLK_MFC_PLL>,
+				 <&clock_topc DOUT_SCLK_AUD_PLL>;
 			clock-names = "fin_pll", "dout_sclk_bus0_pll",
 				      "dout_sclk_bus1_pll", "dout_sclk_cc_pll",
-				      "dout_sclk_mfc_pll";
+				      "dout_sclk_mfc_pll", "dout_sclk_aud_pll";
 		};
 
 		clock_top1: clock-controller@105e0000 {
@@ -218,12 +219,32 @@  clock_peric1: clock-controller@14c80000 {
 			compatible = "samsung,exynos7-clock-peric1";
 			reg = <0x14c80000 0xd00>;
 			#clock-cells = <1>;
-			clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC1>,
+			clocks = <&fin_pll>,
+				 <&clock_top0 DOUT_ACLK_PERIC1>,
 				 <&clock_top0 CLK_SCLK_UART1>,
 				 <&clock_top0 CLK_SCLK_UART2>,
-				 <&clock_top0 CLK_SCLK_UART3>;
-			clock-names = "fin_pll", "dout_aclk_peric1_66",
-				      "sclk_uart1", "sclk_uart2", "sclk_uart3";
+				 <&clock_top0 CLK_SCLK_UART3>,
+				 <&clock_top0 CLK_SCLK_SPI0>,
+				 <&clock_top0 CLK_SCLK_SPI1>,
+				 <&clock_top0 CLK_SCLK_SPI2>,
+				 <&clock_top0 CLK_SCLK_SPI3>,
+				 <&clock_top0 CLK_SCLK_SPI4>,
+				 <&clock_top0 CLK_SCLK_I2S1>,
+				 <&clock_top0 CLK_SCLK_PCM1>,
+				 <&clock_top0 CLK_SCLK_SPDIF>;
+			clock-names = "fin_pll",
+				      "dout_aclk_peric1_66",
+				      "sclk_uart1",
+				      "sclk_uart2",
+				      "sclk_uart3",
+				      "sclk_spi0",
+				      "sclk_spi1",
+				      "sclk_spi2",
+				      "sclk_spi3",
+				      "sclk_spi4",
+				      "sclk_i2s1",
+				      "sclk_pcm1",
+				      "sclk_spdif";
 		};
 
 		clock_peris: clock-controller@10040000 {