diff mbox series

[1/2] ARM: dts: exynos: split dmas into array of phandles in Exynos5250

Message ID 20220102155807.42758-1-krzysztof.kozlowski@canonical.com (mailing list archive)
State Accepted
Commit 88829baee3db050a06fd5ce8a2be0c39992f90da
Headers show
Series [1/2] ARM: dts: exynos: split dmas into array of phandles in Exynos5250 | expand

Commit Message

Krzysztof Kozlowski Jan. 2, 2022, 3:58 p.m. UTC
"dmas" property should be rather an array of phandles, as dtschema
points.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
 arch/arm/boot/dts/exynos5250.dtsi | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

Comments

Andi Shyti Jan. 3, 2022, 9:40 a.m. UTC | #1
Hi Krzysztof,

On Sun, Jan 02, 2022 at 04:58:06PM +0100, Krzysztof Kozlowski wrote:
> "dmas" property should be rather an array of phandles, as dtschema
> points.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

Reviewed-by: Andi Shyti <andi@etezian.org>

Thanks,
Andi
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 139778928b93..102bb57bf704 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -496,8 +496,7 @@  spi_0: spi@12d20000 {
 			status = "disabled";
 			reg = <0x12d20000 0x100>;
 			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 5
-				&pdma0 4>;
+			dmas = <&pdma0 5>, <&pdma0 4>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -512,8 +511,7 @@  spi_1: spi@12d30000 {
 			status = "disabled";
 			reg = <0x12d30000 0x100>;
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma1 5
-				&pdma1 4>;
+			dmas = <&pdma1 5>, <&pdma1 4>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -528,8 +526,7 @@  spi_2: spi@12d40000 {
 			status = "disabled";
 			reg = <0x12d40000 0x100>;
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 7
-				&pdma0 6>;
+			dmas = <&pdma0 7>, <&pdma0 6>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;