diff mbox series

[14/23] arm64: dts: fsd: Add initial device tree support

Message ID 20220113121143.22280-15-alim.akhtar@samsung.com (mailing list archive)
State Superseded
Headers show
Series [01/23] dt-bindings: clock: Document FSD CMU bindings | expand

Commit Message

Alim Akhtar Jan. 13, 2022, 12:11 p.m. UTC
Add initial device tree support for "Full Self-Driving" (FSD) SoC
This SoC contain three clusters of four cortex-a72 CPUs and various
peripheral IPs.

Cc: linux-fsd@tesla.com
Signed-off-by: Arjun K V <arjun.kv@samsung.com>
Signed-off-by: Aswani Reddy <aswani.reddy@samsung.com>
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
Signed-off-by: Chandrasekar R <rcsekar@samsung.com>
Signed-off-by: Shashank Prashar <s.prashar@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
---
 MAINTAINERS                        |   8 +
 arch/arm64/Kconfig.platforms       |   6 +
 arch/arm64/boot/dts/Makefile       |   1 +
 arch/arm64/boot/dts/tesla/Makefile |   3 +
 arch/arm64/boot/dts/tesla/fsd.dts  | 140 ++++++
 arch/arm64/boot/dts/tesla/fsd.dtsi | 715 +++++++++++++++++++++++++++++
 6 files changed, 873 insertions(+)
 create mode 100644 arch/arm64/boot/dts/tesla/Makefile
 create mode 100644 arch/arm64/boot/dts/tesla/fsd.dts
 create mode 100644 arch/arm64/boot/dts/tesla/fsd.dtsi

Comments

Krzysztof Kozlowski Jan. 13, 2022, 1:16 p.m. UTC | #1
On 13/01/2022 13:11, Alim Akhtar wrote:
> Add initial device tree support for "Full Self-Driving" (FSD) SoC
> This SoC contain three clusters of four cortex-a72 CPUs and various
> peripheral IPs.
> 
> Cc: linux-fsd@tesla.com
> Signed-off-by: Arjun K V <arjun.kv@samsung.com>
> Signed-off-by: Aswani Reddy <aswani.reddy@samsung.com>
> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
> Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
> Signed-off-by: Chandrasekar R <rcsekar@samsung.com>
> Signed-off-by: Shashank Prashar <s.prashar@samsung.com>
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> ---
>  MAINTAINERS                        |   8 +
>  arch/arm64/Kconfig.platforms       |   6 +
>  arch/arm64/boot/dts/Makefile       |   1 +
>  arch/arm64/boot/dts/tesla/Makefile |   3 +
>  arch/arm64/boot/dts/tesla/fsd.dts  | 140 ++++++
>  arch/arm64/boot/dts/tesla/fsd.dtsi | 715 +++++++++++++++++++++++++++++
>  6 files changed, 873 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/tesla/Makefile
>  create mode 100644 arch/arm64/boot/dts/tesla/fsd.dts
>  create mode 100644 arch/arm64/boot/dts/tesla/fsd.dtsi
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index fb18ce7168aa..02d56909c5e2 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2726,6 +2726,14 @@ S:	Maintained
>  F:	Documentation/devicetree/bindings/media/tegra-cec.txt
>  F:	drivers/media/cec/platform/tegra/
>  
> +ARM/TESLA FSD SoC SUPPORT
> +M:	Alim Akhtar <alim.akhtar@samsung.com>
> +M:	linux-fsd@tesla.com
> +L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> +L:	linux-samsung-soc@vger.kernel.org
> +S:	Maintained
> +F:	arch/arm64/boot/dts/tesla*
> +

+Cc Arnd,

Please Cc all SoC maintainers in new sub-architecture submissions, so
Olof and Arnd.

>  ARM/TETON BGA MACHINE SUPPORT
>  M:	"Mark F. Brown" <mark.brown314@gmail.com>
>  L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
> index 54e3910e8b9b..bb8a047c2359 100644
> --- a/arch/arm64/Kconfig.platforms
> +++ b/arch/arm64/Kconfig.platforms
> @@ -267,6 +267,12 @@ config ARCH_TEGRA
>  	help
>  	  This enables support for the NVIDIA Tegra SoC family.
>  
> +config ARCH_TESLA_FSD
> +	bool "ARMv8 based Tesla platform"
> +	select ARCH_EXYNOS

How similar it is? I think it is better to duplicate Exynos
selections/options here, instead of selecting entire ARCH. If this would
require "depends on ARCH_EXYNOS || ARCH_TESLA_FSD" everywhere in the
drivers, it's a hint that it is not a separate SoC but it is an Exynos,
so it might not need a new sub-architecture.


> +	help
> +	  Support for ARMv8 based Tesla platforms.
> +
>  config ARCH_SPRD
>  	bool "Spreadtrum SoC platform"
>  	help
> diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
> index 639e01a4d855..1ba04e31a438 100644
> --- a/arch/arm64/boot/dts/Makefile
> +++ b/arch/arm64/boot/dts/Makefile
> @@ -27,6 +27,7 @@ subdir-y += rockchip
>  subdir-y += socionext
>  subdir-y += sprd
>  subdir-y += synaptics
> +subdir-y += tesla
>  subdir-y += ti
>  subdir-y += toshiba
>  subdir-y += xilinx
> diff --git a/arch/arm64/boot/dts/tesla/Makefile b/arch/arm64/boot/dts/tesla/Makefile
> new file mode 100644
> index 000000000000..a9818cda6b08
> --- /dev/null
> +++ b/arch/arm64/boot/dts/tesla/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0
> +dtb-$(CONFIG_ARCH_TESLA_FSD) += \
> +	fsd.dtb
> diff --git a/arch/arm64/boot/dts/tesla/fsd.dts b/arch/arm64/boot/dts/tesla/fsd.dts
> new file mode 100644
> index 000000000000..e9bbd3284de9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/tesla/fsd.dts

No, this is not a fsd.dts, but some board. You call FSD a SoC, so this
should have different name.

> @@ -0,0 +1,140 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Tesla FSD board device tree source
> + *
> + * Copyright (c) 2017-2021 Samsung Electronics Co., Ltd.
> + *		https://www.samsung.com
> + * Copyright (c) 2017-2021 Tesla, Inc.
> + *		https://www.tesla.com
> + */
> +
> +/dts-v1/;
> +#include "fsd.dtsi"
> +
> +/ {
> +	model = "Tesla Full Self-Driving (FSD) SoC";

Wrong model, this is DTS, not DTSI.

> +	compatible = "tesla,fsd";

Missing compatible for board.

> +
> +	aliases {
> +		serial0 = &serial_0;
> +		serial1 = &serial_1;
> +	};
> +
> +	chosen {
> +		stdout-path = &serial_0;
> +		linux,initrd-start = <0xE0000000>;
> +		linux,initrd-end = <0xE4F00000>;
> +		bootargs = "console=ttySAC0,115200n8
> +			earlycon=exynos4210,0x14180000 root=/dev/ram0
> +			init=/linuxrc";

These are not bootargs matching SoC. earlycon is purely a debug option.
console is duplicating stdout-path. root and init are also not a part of
DTSI or DTS.

> +	};
> +
> +	memory@80000000 {
> +		device_type = "memory";
> +		reg = <0x0 0x80000000 0x2 0x00000000>;
> +	};
> +};
> +
> +&fin_pll {
> +	clock-frequency = <24000000>;
> +};
> +
> +&serial_0 {
> +	status = "okay";
> +};
> +
> +&serial_1 {
> +	status = "okay";
> +};
> +
> +&clock_cmu {
> +	status = "okay";
> +};
> +
> +&clock_imem {
> +	status = "okay";
> +};
> +
> +&clock_peric {
> +	status = "okay";
> +};

The labels/overrides are with weird order... looks like a mess. Anyway,
clocks should be always enabled, why board has to enable them?

> +
> +&smmu_isp {
> +	status = "okay";
> +};
> +
> +&clock_fsys0 {
> +	status = "okay";
> +};
> +
> +&clock_fsys1 {
> +	status = "okay";
> +};
> +
> +&smmu_peric {
> +	status = "okay";

The same as clocks.

> +};
> +
> +&smmu_imem {
> +	status = "okay";
> +};
> +
> +&smmu_fsys0 {
> +	status = "okay";
> +};
> +
> +&hsi2c_0 {
> +	status = "okay";

This looks wrong. There is nothing attached.

> +};
> +
> +&hsi2c_1 {
> +	status = "okay";

Same here and other I2C.

> +};
> +
> +&hsi2c_2 {
> +	status = "okay";
> +};
> +
> +&hsi2c_3 {
> +	status = "okay";
> +};
> +
> +&hsi2c_4 {
> +	status = "okay";
> +};
> +
> +&hsi2c_5 {
> +	status = "okay";
> +};
> +
> +&hsi2c_6 {
> +	status = "okay";
> +};
> +
> +&hsi2c_7 {
> +	status = "okay";
> +};
> +
> +&pwm_0 {
> +	status = "okay";

Nope, nope.

> +};
> +
> +&pwm_1 {
> +	status = "okay";
> +};
> +
> +&mdma0 {
> +	status = "okay";

Can you imagine SoC with disabled DMA?

> +};
> +
> +&mdma1 {
> +	status = "okay";
> +};
> +
> +&pdma0 {
> +	status = "okay";
> +};
> +
> +&pdma1 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi
> new file mode 100644
> index 000000000000..47cd9f20566e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/tesla/fsd.dtsi
> @@ -0,0 +1,715 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Tesla Full Self-Driving SoC device tree source
> + *
> + * Copyright (c) 2017-2022 Samsung Electronics Co., Ltd.
> + *		https://www.samsung.com
> + * Copyright (c) 2017-2022 Tesla, Inc.
> + *		https://www.tesla.com
> + */
> +
> +#include <dt-bindings/clock/fsd-clk.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +	compatible = "tesla,fsd";

Same compatible as board - nope.

> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	aliases {
> +		watchdog0 = &watchdog_0;
> +		watchdog1 = &watchdog_1;
> +		watchdog2 = &watchdog_2;

I think watchdogs do not need/use aliases.

> +		hsi2c0 = &hsi2c_0;
> +		hsi2c1 = &hsi2c_1;
> +		hsi2c2 = &hsi2c_2;
> +		hsi2c3 = &hsi2c_3;
> +		hsi2c4 = &hsi2c_4;
> +		hsi2c5 = &hsi2c_5;
> +		hsi2c6 = &hsi2c_6;
> +		hsi2c7 = &hsi2c_7;
> +	};
> +
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&cpucl0_0>;
> +				};
> +				core1 {
> +					cpu = <&cpucl0_1>;
> +				};
> +				core2 {
> +					cpu = <&cpucl0_2>;
> +				};
> +				core3 {
> +					cpu = <&cpucl0_3>;
> +				};
> +			};
> +
> +			cluster1 {
> +				core0 {
> +					cpu = <&cpucl1_0>;
> +				};
> +				core1 {
> +					cpu = <&cpucl1_1>;
> +				};
> +				core2 {
> +					cpu = <&cpucl1_2>;
> +				};
> +				core3 {
> +					cpu = <&cpucl1_3>;
> +				};
> +			};
> +
> +			cluster2 {
> +				core0 {
> +					cpu = <&cpucl2_0>;
> +				};
> +				core1 {
> +					cpu = <&cpucl2_1>;
> +				};
> +				core2 {
> +					cpu = <&cpucl2_2>;
> +				};
> +				core3 {
> +					cpu = <&cpucl2_3>;
> +				};
> +			};
> +		};
> +
> +		/* Cluster 0 */
> +		cpucl0_0: cpu@0 {
> +				device_type = "cpu";
> +				compatible = "arm,cortex-a72";
> +				reg = <0x0 0x000>;
> +				enable-method = "psci";
> +				clock-frequency = <2400000000>;
> +				cpu-idle-states = <&CPU_SLEEP>;
> +				next-level-cache = <&L2_0>;
> +		};
> +
> +		cpucl0_1: cpu@1 {
> +				device_type = "cpu";
> +				compatible = "arm,cortex-a72";
> +				reg = <0x0 0x001>;
> +				enable-method = "psci";
> +				clock-frequency = <2400000000>;
> +				cpu-idle-states = <&CPU_SLEEP>;
> +				next-level-cache = <&L2_0>;
> +		};
> +
> +		cpucl0_2: cpu@2 {
> +				device_type = "cpu";
> +				compatible = "arm,cortex-a72";
> +				reg = <0x0 0x002>;
> +				enable-method = "psci";
> +				clock-frequency = <2400000000>;
> +				cpu-idle-states = <&CPU_SLEEP>;
> +				next-level-cache = <&L2_0>;
> +		};
> +
> +		cpucl0_3: cpu@3 {
> +				device_type = "cpu";
> +				compatible = "arm,cortex-a72";
> +				reg = <0x0 0x003>;
> +				enable-method = "psci";
> +				cpu-idle-states = <&CPU_SLEEP>;
> +				next-level-cache = <&L2_0>;
> +		};
> +
> +		/* Cluster 1 */
> +		cpucl1_0: cpu@100 {
> +				device_type = "cpu";
> +				compatible = "arm,cortex-a72";
> +				reg = <0x0 0x100>;
> +				enable-method = "psci";
> +				clock-frequency = <2400000000>;
> +				cpu-idle-states = <&CPU_SLEEP>;
> +				next-level-cache = <&L2_0>;
> +		};
> +
> +		cpucl1_1: cpu@101 {
> +				device_type = "cpu";
> +				compatible = "arm,cortex-a72";
> +				reg = <0x0 0x101>;
> +				enable-method = "psci";
> +				clock-frequency = <2400000000>;
> +				cpu-idle-states = <&CPU_SLEEP>;
> +				next-level-cache = <&L2_0>;
> +		};
> +
> +		cpucl1_2: cpu@102 {
> +				device_type = "cpu";
> +				compatible = "arm,cortex-a72";
> +				reg = <0x0 0x102>;
> +				enable-method = "psci";
> +				clock-frequency = <2400000000>;
> +				cpu-idle-states = <&CPU_SLEEP>;
> +				next-level-cache = <&L2_0>;
> +		};
> +
> +		cpucl1_3: cpu@103 {
> +				device_type = "cpu";
> +				compatible = "arm,cortex-a72";
> +				reg = <0x0 0x103>;
> +				enable-method = "psci";
> +				clock-frequency = <2400000000>;
> +				cpu-idle-states = <&CPU_SLEEP>;
> +				next-level-cache = <&L2_0>;
> +		};
> +
> +		/* Cluster 2 */
> +		cpucl2_0: cpu@200 {
> +				device_type = "cpu";
> +				compatible = "arm,cortex-a72";
> +				reg = <0x0 0x200>;
> +				enable-method = "psci";
> +				clock-frequency = <2400000000>;
> +				cpu-idle-states = <&CPU_SLEEP>;
> +				next-level-cache = <&L2_0>;
> +		};
> +
> +		cpucl2_1: cpu@201 {
> +				device_type = "cpu";
> +				compatible = "arm,cortex-a72";
> +				reg = <0x0 0x201>;
> +				enable-method = "psci";
> +				clock-frequency = <2400000000>;
> +				cpu-idle-states = <&CPU_SLEEP>;
> +				next-level-cache = <&L2_0>;
> +		};
> +
> +		cpucl2_2: cpu@202 {
> +				device_type = "cpu";
> +				compatible = "arm,cortex-a72";
> +				reg = <0x0 0x202>;
> +				enable-method = "psci";
> +				clock-frequency = <2400000000>;
> +				cpu-idle-states = <&CPU_SLEEP>;
> +				next-level-cache = <&L2_0>;
> +		};
> +
> +		cpucl2_3: cpu@203 {
> +				device_type = "cpu";
> +				compatible = "arm,cortex-a72";
> +				reg = <0x0 0x203>;
> +				enable-method = "psci";
> +				clock-frequency = <2400000000>;
> +				cpu-idle-states = <&CPU_SLEEP>;
> +				next-level-cache = <&L2_0>;
> +		};
> +
> +		idle-states {
> +			entry-method = "arm,psci";
> +
> +			CPU_SLEEP: cpu-sleep {
> +				idle-state-name = "c2";
> +				compatible = "arm,idle-state";
> +				local-timer-stop;
> +				arm,psci-suspend-param = <0x0010000>;
> +				entry-latency-us = <30>;
> +				exit-latency-us = <75>;
> +				min-residency-us = <300>;
> +				status = "okay";

No need for status.

> +			};
> +		};
> +
> +		L2_0: l2-cache0 {

lowercase letters in label.

> +			compatible = "cache";

You miss here some properties. Does your DTSI/DTS pass dtschema validation?

> +		};
> +	};
> +
> +	arm-pmu {
> +		compatible = "arm,armv8-pmuv3";
> +		interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-affinity = <&cpucl0_0>, <&cpucl0_1>, <&cpucl0_2>,
> +				     <&cpucl0_3>, <&cpucl1_0>, <&cpucl1_1>,
> +				     <&cpucl1_2>, <&cpucl1_3>, <&cpucl2_0>,
> +				     <&cpucl2_1>, <&cpucl2_2>, <&cpucl2_3>;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci";
> +		method = "smc";
> +		cpu_on = <0xC4000003>;
> +		cpu_suspend = <0xC4000001>;
> +		cpu_off = <0x84000002>;
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,

Not sure - don't you need CPU mask?

> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> +	};
> +
> +	fin_pll: clock {
> +		compatible = "fixed-clock";
> +		clock-output-names = "fin_pll";
> +		#clock-cells = <0>;
> +	};
> +
> +	soc: soc {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges = <0x0 0x0 0x0 0x0 0x0 0x18000000>;
> +		dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>;
> +
> +		gic: interrupt-controller@10400000 {
> +			compatible = "arm,gic-v3";
> +			#interrupt-cells = <3>;
> +			interrupt-controller;
> +			reg =	<0x0 0x10400000 0x0 0x10000>, /* GICD */
> +				<0x0 0x10600000 0x0 0x200000>; /* GICR_RD+GICR_SGI */
> +		};
> +
> +		smmu_isp: iommu@12100000 {
> +			compatible = "arm,mmu-500";
> +			reg = <0x0 0x12100000 0x0 0x10000>;
> +			#iommu-cells = <2>;
> +			#global-interrupts = <11>;
> +			interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
> +				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
> +				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
> +				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
> +				     /* Performance counter interrupts */
> +				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_CSI   */
> +				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_DP_0  */
> +				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_DP_1  */
> +				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_ISP_0 */
> +				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_ISP_1 */
> +				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_MFC_0 */
> +				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_MFC_1 */
> +				     /* Per context non-secure context interrupts, 0-7 interrupts */
> +				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
> +				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_1 */
> +				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_2 */
> +				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_3 */
> +				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_4 */
> +				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_5 */
> +				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_6 */
> +				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_7 */
> +			status = "disabled";
> +		};
> +
> +		smmu_imem: iommu@10200000 {
> +			compatible = "arm,mmu-500";
> +			reg = <0x0 0x10200000 0x0 0x10000>;
> +			#iommu-cells = <2>;
> +			#global-interrupts = <7>;
> +			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
> +				     <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
> +				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
> +				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
> +				     /* Performance counter interrupts */
> +				     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS1_0 */
> +				     <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS1_1 */
> +				     <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>, /* for IMEM_0  */
> +				     /* Per context non-secure context interrupts, 0-3 interrupts */
> +				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
> +				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_1 */
> +				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_2 */
> +				     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_3 */
> +			status = "disabled";
> +		};
> +
> +		smmu_peric: iommu@14900000 {
> +			compatible = "arm,mmu-500";
> +			reg = <0x0 0x14900000 0x0 0x10000>;
> +			#iommu-cells = <2>;
> +			#global-interrupts = <5>;
> +			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
> +				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
> +				     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
> +				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
> +				     /* Performance counter interrupts */
> +				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, /* for PERIC */
> +				     /* Per context non-secure context interrupts, 0-1 interrupts */
> +				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
> +				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_1 */
> +			status = "disabled";
> +		};
> +
> +		smmu_fsys0: iommu@15450000 {
> +			compatible = "arm,mmu-500";
> +			reg = <0x0 0x15450000 0x0 0x10000>;
> +			#iommu-cells = <2>;
> +			#global-interrupts = <5>;
> +			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
> +				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
> +				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
> +				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
> +				     /* Performance counter interrupts */
> +				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS0   */
> +				     /* Per context non-secure context interrupts, 0-1 interrupts */
> +				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
> +				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_1 */
> +			status = "disabled";
> +		};
> +
> +		clock_cmu: clock-controller@11C10000 {
> +			compatible = "tesla,fsd-clock-cmu";
> +			reg = <0x0 0x11C10000 0x0 0x3000>;
> +			#clock-cells = <1>;
> +			clocks = <&fin_pll>;
> +			clock-names = "fin_pll";
> +			status = "disabled";

This explains why DTS has to enable basic SoC features... why do you
disable your clock controllers?

> +		};
> +
> +		clock_imem: clock-controller@10010000 {
> +			compatible = "tesla,fsd-clock-imem";
> +			reg = <0x0 0x10010000 0x0 0x3000>;
> +			#clock-cells = <1>;
> +			clocks = <&fin_pll>,
> +				<&clock_cmu DOUT_CMU_IMEM_TCUCLK>,
> +				<&clock_cmu DOUT_CMU_IMEM_ACLK>,
> +				<&clock_cmu DOUT_CMU_IMEM_DMACLK>;
> +			clock-names = "fin_pll",
> +				"dout_cmu_imem_tcuclk",
> +				"dout_cmu_imem_aclk",
> +				"dout_cmu_imem_dmaclk";
> +			status = "disabled";
> +		};
> +
> +		clock_peric: clock-controller@14010000 {
> +			compatible = "tesla,fsd-clock-peric";
> +			reg = <0x0 0x14010000 0x0 0x3000>;
> +			#clock-cells = <1>;
> +			clocks = <&fin_pll>,
> +				<&clock_cmu DOUT_CMU_PLL_SHARED0_DIV4>,
> +				<&clock_cmu DOUT_CMU_PERIC_SHARED1DIV36>,
> +				<&clock_cmu DOUT_CMU_PERIC_SHARED0DIV3_TBUCLK>,
> +				<&clock_cmu DOUT_CMU_PERIC_SHARED0DIV20>,
> +				<&clock_cmu DOUT_CMU_PERIC_SHARED1DIV4_DMACLK>;
> +			clock-names = "fin_pll",
> +				"dout_cmu_pll_shared0_div4",
> +				"dout_cmu_peric_shared1div36",
> +				"dout_cmu_peric_shared0div3_tbuclk",
> +				"dout_cmu_peric_shared0div20",
> +				"dout_cmu_peric_shared1div4_dmaclk";
> +			status = "disabled";
> +		};
> +
> +		clock_fsys0: clock-controller@15010000 {
> +			compatible = "tesla,fsd-clock-fsys0";
> +			reg = <0x0 0x15010000 0x0 0x3000>;
> +			#clock-cells = <1>;
> +			clocks = <&fin_pll>,
> +				<&clock_cmu DOUT_CMU_PLL_SHARED0_DIV6>,
> +				<&clock_cmu DOUT_CMU_FSYS0_SHARED1DIV4>,
> +				<&clock_cmu DOUT_CMU_FSYS0_SHARED0DIV4>;
> +			clock-names = "fin_pll",
> +				"dout_cmu_pll_shared0_div6",
> +				"dout_cmu_fsys0_shared1div4",
> +				"dout_cmu_fsys0_shared0div4";
> +			status = "disabled";
> +		};
> +
> +		clock_fsys1: clock-controller@16810000 {
> +			compatible = "tesla,fsd-clock-fsys1";
> +			reg = <0x0 0x16810000 0x0 0x3000>;
> +			#clock-cells = <1>;
> +			clocks = <&fin_pll>,
> +				<&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV8>,
> +				<&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV4>;
> +			clock-names = "fin_pll",
> +				"dout_cmu_fsys1_shared0div8",
> +				"dout_cmu_fsys1_shared0div4";
> +			status = "disabled";
> +		};
> +
> +		clock_mfc: clock-controller@12810000 {
> +			compatible = "tesla,fsd-clock-mfc";
> +			reg = <0x0 0x12810000 0x0 0x3000>;
> +			#clock-cells = <1>;
> +			clocks = <&fin_pll>;
> +			clock-names = "fin_pll";
> +			status = "disabled";
> +		};
> +
> +		clock_csi: clock-controller@12610000 {
> +			compatible = "tesla,fsd-clock-cam_csi";
> +			reg = <0x0 0x12610000 0x0 0x3000>;
> +			#clock-cells = <1>;
> +			clocks = <&fin_pll>;
> +			clock-names = "fin_pll";
> +			status = "disabled";
> +		};
> +
> +		mdma0: mdma@10100000 {

Node name: just dma to be generic. Schema does not enforce it but might
at some point.

> +			compatible = "arm,pl330", "arm,primecell";
> +			reg = <0x0 0x10100000 0x0 0x1000>;
> +			interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
> +			#dma-cells = <1>;
> +			#dma-channels = <8>;
> +			#dma-requests = <32>;
> +			clocks = <&clock_imem IMEM_DMA0_IPCLKPORT_ACLK>;
> +			clock-names = "apb_pclk";
> +			iommus = <&smmu_imem 0x800 0x0>;
> +			status = "disabled";
> +		};
> +
> +		mdma1: mdma@10110000 {
> +			compatible = "arm,pl330", "arm,primecell";
> +			reg = <0x0 0x10110000 0x0 0x1000>;
> +			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
> +			#dma-cells = <1>;
> +			#dma-channels = <8>;
> +			#dma-requests = <32>;
> +			clocks = <&clock_imem IMEM_DMA1_IPCLKPORT_ACLK>;
> +			clock-names = "apb_pclk";
> +			iommus = <&smmu_imem 0x801 0x0>;
> +			status = "disabled";
> +		};
> +
> +		pdma0: pdma@14280000 {
> +			compatible = "arm,pl330", "arm,primecell";
> +			reg = <0x0 0x14280000 0x0 0x1000>;
> +			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
> +			#dma-cells = <1>;
> +			#dma-channels = <8>;
> +			#dma-requests = <32>;
> +			clocks = <&clock_peric PERIC_DMA0_IPCLKPORT_ACLK>;
> +			clock-names = "apb_pclk";
> +			iommus = <&smmu_peric 0x2 0x0>;
> +			status = "disabled";
> +		};
> +
> +		pdma1: pdma@14290000 {
> +			compatible = "arm,pl330", "arm,primecell";
> +			reg = <0x0 0x14290000 0x0 0x1000>;
> +			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
> +			#dma-cells = <1>;
> +			#dma-channels = <8>;
> +			#dma-requests = <32>;
> +			clocks = <&clock_peric PERIC_DMA1_IPCLKPORT_ACLK>;
> +			clock-names = "apb_pclk";
> +			iommus = <&smmu_peric 0x1 0x0>;
> +			status = "disabled";
> +		};
> +
> +		mct: mct@10040000 {
> +			compatible = "samsung,exynos4210-mct";
> +			reg = <0x0 0x10040000 0x0 0x800>;
> +			interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&fin_pll>, <&clock_imem IMEM_MCT_PCLK>;
> +			clock-names = "fin_pll", "mct";
> +		};
> +
> +		serial_0: serial@14180000 {
> +			compatible = "samsung,exynos4210-uart";
> +			reg = <0x0 0x14180000 0x0 0x100>;
> +			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
> +			dmas = <&pdma1 0>, <&pdma1 1>;
> +			dma-names = "tx", "rx";
> +			clocks = <&clock_peric PERIC_PCLK_UART0>,
> +				 <&clock_peric PERIC_SCLK_UART0>;
> +			clock-names = "uart", "clk_uart_baud0";
> +			status = "disabled";
> +		};
> +
> +		serial_1: serial@14190000 {
> +			compatible = "samsung,exynos4210-uart";
> +			reg = <0x0 0x14190000 0x0 0x100>;
> +			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
> +			dmas = <&pdma1 2>, <&pdma1 3>;
> +			dma-names = "tx", "rx";
> +			clocks = <&clock_peric PERIC_PCLK_UART1>,
> +				 <&clock_peric PERIC_SCLK_UART1>;
> +			clock-names = "uart", "clk_uart_baud0";
> +			status = "disabled";
> +		};
> +
> +		pmu_system_controller: system-controller@11400000 {
> +			compatible = "samsung,exynos7-pmu", "syscon";
> +			reg = <0x0 0x11400000 0x0 0x5000>;
> +		};
> +
> +		watchdog_0: watchdog@100A0000 {

lowercase hex addresses. Here, in reg below and all other nodes.

> +			compatible = "samsung,exynos7-wdt";
> +			reg = <0x0 0x100A0000 0x0 0x100>;
> +			interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
> +			samsung,syscon-phandle = <&pmu_system_controller>;
> +			clocks = <&fin_pll>;
> +			clock-names = "watchdog";
> +			interrupt-mode = <1>;

This property looks unsupported. Did you run dtschema checks?

Best regards,
Krzysztof
Arnd Bergmann Jan. 13, 2022, 2:23 p.m. UTC | #2
On Thu, Jan 13, 2022 at 2:16 PM Krzysztof Kozlowski
<krzysztof.kozlowski@canonical.com> wrote:
> >  ARM/TETON BGA MACHINE SUPPORT
> >  M:   "Mark F. Brown" <mark.brown314@gmail.com>
> >  L:   linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> > diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
> > index 54e3910e8b9b..bb8a047c2359 100644
> > --- a/arch/arm64/Kconfig.platforms
> > +++ b/arch/arm64/Kconfig.platforms
> > @@ -267,6 +267,12 @@ config ARCH_TEGRA
> >       help
> >         This enables support for the NVIDIA Tegra SoC family.
> >
> > +config ARCH_TESLA_FSD
> > +     bool "ARMv8 based Tesla platform"
> > +     select ARCH_EXYNOS
>
> How similar it is? I think it is better to duplicate Exynos
> selections/options here, instead of selecting entire ARCH. If this would
> require "depends on ARCH_EXYNOS || ARCH_TESLA_FSD" everywhere in the
> drivers, it's a hint that it is not a separate SoC but it is an Exynos,
> so it might not need a new sub-architecture.

Agreed, the SoC family options mainly exist so we can quickly enable or
disable drivers based on what a kernel is built for. If most of the drivers
for this SoC are shared with Exynos, I think having a single option is
sufficient, but it may be worth pointing out both in the help text.

If we want to have a separate option (mainly to help users find it), maybe
a 'depends on ARCH_EXYNOS' would be better. How many uses of
ARCH_TESLA_FSD are there?

        Arnd
Alim Akhtar Jan. 14, 2022, 8:13 a.m. UTC | #3
Hi Arnd and Krzysztof

>-----Original Message-----
>From: Arnd Bergmann [mailto:arnd@arndb.de]
>Sent: Thursday, January 13, 2022 7:54 PM
>To: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
>Cc: Alim Akhtar <alim.akhtar@samsung.com>; Linux ARM <linux-arm-
>kernel@lists.infradead.org>; Linux Kernel Mailing List <linux-
>kernel@vger.kernel.org>; SoC Team <soc@kernel.org>; linux-clk <linux-
>clk@vger.kernel.org>; DTML <devicetree@vger.kernel.org>; Olof Johansson
><olof@lixom.net>; Linus Walleij <linus.walleij@linaro.org>; Catalin Marinas
><catalin.marinas@arm.com>; Rob Herring <robh+dt@kernel.org>; Sylwester
>Nawrocki <s.nawrocki@samsung.com>; moderated list:ARM/SAMSUNG
>EXYNOS ARM ARCHITECTURES <linux-samsung-soc@vger.kernel.org>; Pankaj
>Dubey <pankaj.dubey@samsung.com>; linux-fsd@tesla.com; Arjun K V
><arjun.kv@samsung.com>; Aswani Reddy <aswani.reddy@samsung.com>;
>Ajay Kumar <ajaykumar.rs@samsung.com>; Sriranjani P
><sriranjani.p@samsung.com>; Chandrasekar R <rcsekar@samsung.com>;
>Shashank Prashar <s.prashar@samsung.com>; Arnd Bergmann
><arnd@arndb.de>
>Subject: Re: [PATCH 14/23] arm64: dts: fsd: Add initial device tree support
>
>On Thu, Jan 13, 2022 at 2:16 PM Krzysztof Kozlowski
><krzysztof.kozlowski@canonical.com> wrote:
>> >  ARM/TETON BGA MACHINE SUPPORT
>> >  M:   "Mark F. Brown" <mark.brown314@gmail.com>
>> >  L:   linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
>> > diff --git a/arch/arm64/Kconfig.platforms
>> > b/arch/arm64/Kconfig.platforms index 54e3910e8b9b..bb8a047c2359
>> > 100644
>> > --- a/arch/arm64/Kconfig.platforms
>> > +++ b/arch/arm64/Kconfig.platforms
>> > @@ -267,6 +267,12 @@ config ARCH_TEGRA
>> >       help
>> >         This enables support for the NVIDIA Tegra SoC family.
>> >
>> > +config ARCH_TESLA_FSD
>> > +     bool "ARMv8 based Tesla platform"
>> > +     select ARCH_EXYNOS
>>
>> How similar it is? I think it is better to duplicate Exynos
>> selections/options here, instead of selecting entire ARCH. If this
>> would require "depends on ARCH_EXYNOS || ARCH_TESLA_FSD"
>everywhere in
>> the drivers, it's a hint that it is not a separate SoC but it is an
>> Exynos, so it might not need a new sub-architecture.
>
>Agreed, the SoC family options mainly exist so we can quickly enable or
>disable drivers based on what a kernel is built for. If most of the drivers for
>this SoC are shared with Exynos, I think having a single option is sufficient, but
>it may be worth pointing out both in the help text.
>
>If we want to have a separate option (mainly to help users find it), maybe a
>'depends on ARCH_EXYNOS' would be better. How many uses of
>ARCH_TESLA_FSD are there?
>
It is true that FSD shares few IPs with Exynos and it dose contains Telsa specific IPs/ PCIe/some of the PHYs/ GPUs (different then Exynos) etc. to name a few.
And drivers for those will be posted in upcoming phases by Samsung, Telsa etc.
AFA architecture is concerns both Exynos and FSD has completely different architecture (at least at HW level).
In my opinion, it is make sense to have a separate option for FSD.
And as Arnd suggested "'depends on ARCH_EXYNOS" may be the way forward.

>        Arnd
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index fb18ce7168aa..02d56909c5e2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2726,6 +2726,14 @@  S:	Maintained
 F:	Documentation/devicetree/bindings/media/tegra-cec.txt
 F:	drivers/media/cec/platform/tegra/
 
+ARM/TESLA FSD SoC SUPPORT
+M:	Alim Akhtar <alim.akhtar@samsung.com>
+M:	linux-fsd@tesla.com
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-samsung-soc@vger.kernel.org
+S:	Maintained
+F:	arch/arm64/boot/dts/tesla*
+
 ARM/TETON BGA MACHINE SUPPORT
 M:	"Mark F. Brown" <mark.brown314@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 54e3910e8b9b..bb8a047c2359 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -267,6 +267,12 @@  config ARCH_TEGRA
 	help
 	  This enables support for the NVIDIA Tegra SoC family.
 
+config ARCH_TESLA_FSD
+	bool "ARMv8 based Tesla platform"
+	select ARCH_EXYNOS
+	help
+	  Support for ARMv8 based Tesla platforms.
+
 config ARCH_SPRD
 	bool "Spreadtrum SoC platform"
 	help
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 639e01a4d855..1ba04e31a438 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -27,6 +27,7 @@  subdir-y += rockchip
 subdir-y += socionext
 subdir-y += sprd
 subdir-y += synaptics
+subdir-y += tesla
 subdir-y += ti
 subdir-y += toshiba
 subdir-y += xilinx
diff --git a/arch/arm64/boot/dts/tesla/Makefile b/arch/arm64/boot/dts/tesla/Makefile
new file mode 100644
index 000000000000..a9818cda6b08
--- /dev/null
+++ b/arch/arm64/boot/dts/tesla/Makefile
@@ -0,0 +1,3 @@ 
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_TESLA_FSD) += \
+	fsd.dtb
diff --git a/arch/arm64/boot/dts/tesla/fsd.dts b/arch/arm64/boot/dts/tesla/fsd.dts
new file mode 100644
index 000000000000..e9bbd3284de9
--- /dev/null
+++ b/arch/arm64/boot/dts/tesla/fsd.dts
@@ -0,0 +1,140 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Tesla FSD board device tree source
+ *
+ * Copyright (c) 2017-2021 Samsung Electronics Co., Ltd.
+ *		https://www.samsung.com
+ * Copyright (c) 2017-2021 Tesla, Inc.
+ *		https://www.tesla.com
+ */
+
+/dts-v1/;
+#include "fsd.dtsi"
+
+/ {
+	model = "Tesla Full Self-Driving (FSD) SoC";
+	compatible = "tesla,fsd";
+
+	aliases {
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+	};
+
+	chosen {
+		stdout-path = &serial_0;
+		linux,initrd-start = <0xE0000000>;
+		linux,initrd-end = <0xE4F00000>;
+		bootargs = "console=ttySAC0,115200n8
+			earlycon=exynos4210,0x14180000 root=/dev/ram0
+			init=/linuxrc";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x00000000>;
+	};
+};
+
+&fin_pll {
+	clock-frequency = <24000000>;
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&clock_cmu {
+	status = "okay";
+};
+
+&clock_imem {
+	status = "okay";
+};
+
+&clock_peric {
+	status = "okay";
+};
+
+&smmu_isp {
+	status = "okay";
+};
+
+&clock_fsys0 {
+	status = "okay";
+};
+
+&clock_fsys1 {
+	status = "okay";
+};
+
+&smmu_peric {
+	status = "okay";
+};
+
+&smmu_imem {
+	status = "okay";
+};
+
+&smmu_fsys0 {
+	status = "okay";
+};
+
+&hsi2c_0 {
+	status = "okay";
+};
+
+&hsi2c_1 {
+	status = "okay";
+};
+
+&hsi2c_2 {
+	status = "okay";
+};
+
+&hsi2c_3 {
+	status = "okay";
+};
+
+&hsi2c_4 {
+	status = "okay";
+};
+
+&hsi2c_5 {
+	status = "okay";
+};
+
+&hsi2c_6 {
+	status = "okay";
+};
+
+&hsi2c_7 {
+	status = "okay";
+};
+
+&pwm_0 {
+	status = "okay";
+};
+
+&pwm_1 {
+	status = "okay";
+};
+
+&mdma0 {
+	status = "okay";
+};
+
+&mdma1 {
+	status = "okay";
+};
+
+&pdma0 {
+	status = "okay";
+};
+
+&pdma1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi
new file mode 100644
index 000000000000..47cd9f20566e
--- /dev/null
+++ b/arch/arm64/boot/dts/tesla/fsd.dtsi
@@ -0,0 +1,715 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Tesla Full Self-Driving SoC device tree source
+ *
+ * Copyright (c) 2017-2022 Samsung Electronics Co., Ltd.
+ *		https://www.samsung.com
+ * Copyright (c) 2017-2022 Tesla, Inc.
+ *		https://www.tesla.com
+ */
+
+#include <dt-bindings/clock/fsd-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "tesla,fsd";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		watchdog0 = &watchdog_0;
+		watchdog1 = &watchdog_1;
+		watchdog2 = &watchdog_2;
+		hsi2c0 = &hsi2c_0;
+		hsi2c1 = &hsi2c_1;
+		hsi2c2 = &hsi2c_2;
+		hsi2c3 = &hsi2c_3;
+		hsi2c4 = &hsi2c_4;
+		hsi2c5 = &hsi2c_5;
+		hsi2c6 = &hsi2c_6;
+		hsi2c7 = &hsi2c_7;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpucl0_0>;
+				};
+				core1 {
+					cpu = <&cpucl0_1>;
+				};
+				core2 {
+					cpu = <&cpucl0_2>;
+				};
+				core3 {
+					cpu = <&cpucl0_3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpucl1_0>;
+				};
+				core1 {
+					cpu = <&cpucl1_1>;
+				};
+				core2 {
+					cpu = <&cpucl1_2>;
+				};
+				core3 {
+					cpu = <&cpucl1_3>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpucl2_0>;
+				};
+				core1 {
+					cpu = <&cpucl2_1>;
+				};
+				core2 {
+					cpu = <&cpucl2_2>;
+				};
+				core3 {
+					cpu = <&cpucl2_3>;
+				};
+			};
+		};
+
+		/* Cluster 0 */
+		cpucl0_0: cpu@0 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x000>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				next-level-cache = <&L2_0>;
+		};
+
+		cpucl0_1: cpu@1 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x001>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				next-level-cache = <&L2_0>;
+		};
+
+		cpucl0_2: cpu@2 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x002>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				next-level-cache = <&L2_0>;
+		};
+
+		cpucl0_3: cpu@3 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x003>;
+				enable-method = "psci";
+				cpu-idle-states = <&CPU_SLEEP>;
+				next-level-cache = <&L2_0>;
+		};
+
+		/* Cluster 1 */
+		cpucl1_0: cpu@100 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x100>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				next-level-cache = <&L2_0>;
+		};
+
+		cpucl1_1: cpu@101 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x101>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				next-level-cache = <&L2_0>;
+		};
+
+		cpucl1_2: cpu@102 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x102>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				next-level-cache = <&L2_0>;
+		};
+
+		cpucl1_3: cpu@103 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x103>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				next-level-cache = <&L2_0>;
+		};
+
+		/* Cluster 2 */
+		cpucl2_0: cpu@200 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x200>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				next-level-cache = <&L2_0>;
+		};
+
+		cpucl2_1: cpu@201 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x201>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				next-level-cache = <&L2_0>;
+		};
+
+		cpucl2_2: cpu@202 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x202>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				next-level-cache = <&L2_0>;
+		};
+
+		cpucl2_3: cpu@203 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x203>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				next-level-cache = <&L2_0>;
+		};
+
+		idle-states {
+			entry-method = "arm,psci";
+
+			CPU_SLEEP: cpu-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <30>;
+				exit-latency-us = <75>;
+				min-residency-us = <300>;
+				status = "okay";
+			};
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpucl0_0>, <&cpucl0_1>, <&cpucl0_2>,
+				     <&cpucl0_3>, <&cpucl1_0>, <&cpucl1_1>,
+				     <&cpucl1_2>, <&cpucl1_3>, <&cpucl2_0>,
+				     <&cpucl2_1>, <&cpucl2_2>, <&cpucl2_3>;
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_on = <0xC4000003>;
+		cpu_suspend = <0xC4000001>;
+		cpu_off = <0x84000002>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	fin_pll: clock {
+		compatible = "fixed-clock";
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x0 0x0 0x18000000>;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>;
+
+		gic: interrupt-controller@10400000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg =	<0x0 0x10400000 0x0 0x10000>, /* GICD */
+				<0x0 0x10600000 0x0 0x200000>; /* GICR_RD+GICR_SGI */
+		};
+
+		smmu_isp: iommu@12100000 {
+			compatible = "arm,mmu-500";
+			reg = <0x0 0x12100000 0x0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <11>;
+			interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
+				     /* Performance counter interrupts */
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_CSI   */
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_DP_0  */
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_DP_1  */
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_ISP_0 */
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_ISP_1 */
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_MFC_0 */
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_MFC_1 */
+				     /* Per context non-secure context interrupts, 0-7 interrupts */
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_1 */
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_2 */
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_3 */
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_4 */
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_5 */
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_6 */
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_7 */
+			status = "disabled";
+		};
+
+		smmu_imem: iommu@10200000 {
+			compatible = "arm,mmu-500";
+			reg = <0x0 0x10200000 0x0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <7>;
+			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
+				     <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
+				     /* Performance counter interrupts */
+				     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS1_0 */
+				     <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS1_1 */
+				     <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>, /* for IMEM_0  */
+				     /* Per context non-secure context interrupts, 0-3 interrupts */
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_1 */
+				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_2 */
+				     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_3 */
+			status = "disabled";
+		};
+
+		smmu_peric: iommu@14900000 {
+			compatible = "arm,mmu-500";
+			reg = <0x0 0x14900000 0x0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <5>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
+				     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
+				     /* Performance counter interrupts */
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, /* for PERIC */
+				     /* Per context non-secure context interrupts, 0-1 interrupts */
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
+				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_1 */
+			status = "disabled";
+		};
+
+		smmu_fsys0: iommu@15450000 {
+			compatible = "arm,mmu-500";
+			reg = <0x0 0x15450000 0x0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <5>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
+				     /* Performance counter interrupts */
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS0   */
+				     /* Per context non-secure context interrupts, 0-1 interrupts */
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_1 */
+			status = "disabled";
+		};
+
+		clock_cmu: clock-controller@11C10000 {
+			compatible = "tesla,fsd-clock-cmu";
+			reg = <0x0 0x11C10000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
+			status = "disabled";
+		};
+
+		clock_imem: clock-controller@10010000 {
+			compatible = "tesla,fsd-clock-imem";
+			reg = <0x0 0x10010000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				<&clock_cmu DOUT_CMU_IMEM_TCUCLK>,
+				<&clock_cmu DOUT_CMU_IMEM_ACLK>,
+				<&clock_cmu DOUT_CMU_IMEM_DMACLK>;
+			clock-names = "fin_pll",
+				"dout_cmu_imem_tcuclk",
+				"dout_cmu_imem_aclk",
+				"dout_cmu_imem_dmaclk";
+			status = "disabled";
+		};
+
+		clock_peric: clock-controller@14010000 {
+			compatible = "tesla,fsd-clock-peric";
+			reg = <0x0 0x14010000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				<&clock_cmu DOUT_CMU_PLL_SHARED0_DIV4>,
+				<&clock_cmu DOUT_CMU_PERIC_SHARED1DIV36>,
+				<&clock_cmu DOUT_CMU_PERIC_SHARED0DIV3_TBUCLK>,
+				<&clock_cmu DOUT_CMU_PERIC_SHARED0DIV20>,
+				<&clock_cmu DOUT_CMU_PERIC_SHARED1DIV4_DMACLK>;
+			clock-names = "fin_pll",
+				"dout_cmu_pll_shared0_div4",
+				"dout_cmu_peric_shared1div36",
+				"dout_cmu_peric_shared0div3_tbuclk",
+				"dout_cmu_peric_shared0div20",
+				"dout_cmu_peric_shared1div4_dmaclk";
+			status = "disabled";
+		};
+
+		clock_fsys0: clock-controller@15010000 {
+			compatible = "tesla,fsd-clock-fsys0";
+			reg = <0x0 0x15010000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				<&clock_cmu DOUT_CMU_PLL_SHARED0_DIV6>,
+				<&clock_cmu DOUT_CMU_FSYS0_SHARED1DIV4>,
+				<&clock_cmu DOUT_CMU_FSYS0_SHARED0DIV4>;
+			clock-names = "fin_pll",
+				"dout_cmu_pll_shared0_div6",
+				"dout_cmu_fsys0_shared1div4",
+				"dout_cmu_fsys0_shared0div4";
+			status = "disabled";
+		};
+
+		clock_fsys1: clock-controller@16810000 {
+			compatible = "tesla,fsd-clock-fsys1";
+			reg = <0x0 0x16810000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				<&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV8>,
+				<&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV4>;
+			clock-names = "fin_pll",
+				"dout_cmu_fsys1_shared0div8",
+				"dout_cmu_fsys1_shared0div4";
+			status = "disabled";
+		};
+
+		clock_mfc: clock-controller@12810000 {
+			compatible = "tesla,fsd-clock-mfc";
+			reg = <0x0 0x12810000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
+			status = "disabled";
+		};
+
+		clock_csi: clock-controller@12610000 {
+			compatible = "tesla,fsd-clock-cam_csi";
+			reg = <0x0 0x12610000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
+			status = "disabled";
+		};
+
+		mdma0: mdma@10100000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0x10100000 0x0 0x1000>;
+			interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+			clocks = <&clock_imem IMEM_DMA0_IPCLKPORT_ACLK>;
+			clock-names = "apb_pclk";
+			iommus = <&smmu_imem 0x800 0x0>;
+			status = "disabled";
+		};
+
+		mdma1: mdma@10110000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0x10110000 0x0 0x1000>;
+			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+			clocks = <&clock_imem IMEM_DMA1_IPCLKPORT_ACLK>;
+			clock-names = "apb_pclk";
+			iommus = <&smmu_imem 0x801 0x0>;
+			status = "disabled";
+		};
+
+		pdma0: pdma@14280000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0x14280000 0x0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+			clocks = <&clock_peric PERIC_DMA0_IPCLKPORT_ACLK>;
+			clock-names = "apb_pclk";
+			iommus = <&smmu_peric 0x2 0x0>;
+			status = "disabled";
+		};
+
+		pdma1: pdma@14290000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0x14290000 0x0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+			clocks = <&clock_peric PERIC_DMA1_IPCLKPORT_ACLK>;
+			clock-names = "apb_pclk";
+			iommus = <&smmu_peric 0x1 0x0>;
+			status = "disabled";
+		};
+
+		mct: mct@10040000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x0 0x10040000 0x0 0x800>;
+			interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&fin_pll>, <&clock_imem IMEM_MCT_PCLK>;
+			clock-names = "fin_pll", "mct";
+		};
+
+		serial_0: serial@14180000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x0 0x14180000 0x0 0x100>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 0>, <&pdma1 1>;
+			dma-names = "tx", "rx";
+			clocks = <&clock_peric PERIC_PCLK_UART0>,
+				 <&clock_peric PERIC_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_1: serial@14190000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x0 0x14190000 0x0 0x100>;
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 2>, <&pdma1 3>;
+			dma-names = "tx", "rx";
+			clocks = <&clock_peric PERIC_PCLK_UART1>,
+				 <&clock_peric PERIC_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		pmu_system_controller: system-controller@11400000 {
+			compatible = "samsung,exynos7-pmu", "syscon";
+			reg = <0x0 0x11400000 0x0 0x5000>;
+		};
+
+		watchdog_0: watchdog@100A0000 {
+			compatible = "samsung,exynos7-wdt";
+			reg = <0x0 0x100A0000 0x0 0x100>;
+			interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			clocks = <&fin_pll>;
+			clock-names = "watchdog";
+			interrupt-mode = <1>;
+		};
+
+		watchdog_1: watchdog@100B0000 {
+			compatible = "samsung,exynos7-wdt";
+			reg = <0x0 0x100B0000 0x0 0x100>;
+			interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			clocks = <&fin_pll>;
+			clock-names = "watchdog";
+			interrupt-mode = <1>;
+		};
+
+		watchdog_2: watchdog@100C0000 {
+			compatible = "samsung,exynos7-wdt";
+			reg = <0x0 0x100C0000 0x0 0x100>;
+			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			clocks = <&fin_pll>;
+			clock-names = "watchdog";
+			interrupt-mode = <1>;
+		};
+
+		pwm_0: pwm@14100000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x0 0x14100000 0x0 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&clock_peric PERIC_PWM0_IPCLKPORT_I_PCLK_S0>;
+			clock-names = "timers";
+			status = "disabled";
+		};
+
+		pwm_1: pwm@14110000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x0 0x14110000 0x0 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&clock_peric PERIC_PWM1_IPCLKPORT_I_PCLK_S0>;
+			clock-names = "timers";
+			status = "disabled";
+		};
+
+		hsi2c_0: hsi2c@14200000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14200000 0x0 0x1000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c0_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C0>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_1: hsi2c@14210000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14210000 0x0 0x1000>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c1_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C1>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_2: hsi2c@14220000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14220000 0x0 0x1000>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c2_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C2>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_3: hsi2c@14230000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14230000 0x0 0x1000>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c3_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C3>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_4: hsi2c@14240000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14240000 0x0 0x1000>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c4_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C4>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_5: hsi2c@14250000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14250000 0x0 0x1000>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c5_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C5>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_6: hsi2c@14260000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14260000 0x0 0x1000>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c6_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C6>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_7: hsi2c@14270000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14270000 0x0 0x1000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c7_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C7>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+	};
+};