diff mbox series

[3/3,v3] spi: s3c64xx: Convert to use GPIO descriptors

Message ID 20220118230915.157797-3-linus.walleij@linaro.org (mailing list archive)
State Not Applicable
Headers show
Series [1/3,v3] spi: s3c64xx: Delete unused boardfile helpers | expand

Commit Message

Linus Walleij Jan. 18, 2022, 11:09 p.m. UTC
Convert the S3C64xx SPI host to use GPIO descriptors.

Provide GPIO descriptor tables for the one user with CS
0 and 1.

Cc: linux-samsung-soc@vger.kernel.org
Cc: Sylwester Nawrocki <snawrocki@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- Make sure to write a zero to the fb_delay if unused.
- Drop changes to chipselect data comments.
- Collect Review tags.
ChangeLog v1->v2:
- Split off code cleaning to separate patches
---
 arch/arm/mach-s3c/mach-crag6410-module.c  | 13 ------
 arch/arm/mach-s3c/mach-crag6410.c         | 11 +++++
 drivers/spi/spi-s3c64xx.c                 | 53 ++++++-----------------
 include/linux/platform_data/spi-s3c64xx.h |  2 -
 4 files changed, 24 insertions(+), 55 deletions(-)

Comments

Sam Protsenko Jan. 18, 2022, 11:24 p.m. UTC | #1
On Wed, 19 Jan 2022 at 01:11, Linus Walleij <linus.walleij@linaro.org> wrote:
>
> Convert the S3C64xx SPI host to use GPIO descriptors.
>
> Provide GPIO descriptor tables for the one user with CS
> 0 and 1.
>
> Cc: linux-samsung-soc@vger.kernel.org
> Cc: Sylwester Nawrocki <snawrocki@kernel.org>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>

R-b tags for 1/3 and 2/3 seem to be lost.

> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ChangeLog v2->v3:
> - Make sure to write a zero to the fb_delay if unused.
> - Drop changes to chipselect data comments.
> - Collect Review tags.
> ChangeLog v1->v2:
> - Split off code cleaning to separate patches
> ---

[snip]

> @@ -656,7 +654,11 @@ static int s3c64xx_spi_prepare_message(struct spi_master *master,
>         struct s3c64xx_spi_csinfo *cs = spi->controller_data;
>
>         /* Configure feedback delay */
> -       writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK);
> +       if (!cs)
> +               /* No delay if not defined */
> +               writel(0, sdd->regs + S3C64XX_SPI_FB_CLK);
> +       else
> +               writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK);
>

Looks good to me. I'd add {} braces and change "if (!cs)" to "if
(cs)", but that's hair splitting and not worth v4, it's fine as it is.

[snip]
Andy Shevchenko Jan. 21, 2022, 5:26 p.m. UTC | #2
On Fri, Jan 21, 2022 at 1:52 PM Sam Protsenko
<semen.protsenko@linaro.org> wrote:
> On Wed, 19 Jan 2022 at 01:11, Linus Walleij <linus.walleij@linaro.org> wrote:
> >
> > Convert the S3C64xx SPI host to use GPIO descriptors.
> >
> > Provide GPIO descriptor tables for the one user with CS
> > 0 and 1.

...

> >         /* Configure feedback delay */
> > -       writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK);
> > +       if (!cs)
> > +               /* No delay if not defined */
> > +               writel(0, sdd->regs + S3C64XX_SPI_FB_CLK);
> > +       else
> > +               writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK);
>
> Looks good to me. I'd add {} braces and change "if (!cs)" to "if
> (cs)", but that's hair splitting and not worth v4, it's fine as it is.

If you are going to change code, then why not use positive conditions?

  if (cs)
    ...
  else {
    ...
  }
Sam Protsenko Jan. 21, 2022, 10:18 p.m. UTC | #3
On Fri, 21 Jan 2022 at 19:26, Andy Shevchenko <andy.shevchenko@gmail.com> wrote:
>
> On Fri, Jan 21, 2022 at 1:52 PM Sam Protsenko
> <semen.protsenko@linaro.org> wrote:
> > On Wed, 19 Jan 2022 at 01:11, Linus Walleij <linus.walleij@linaro.org> wrote:
> > >
> > > Convert the S3C64xx SPI host to use GPIO descriptors.
> > >
> > > Provide GPIO descriptor tables for the one user with CS
> > > 0 and 1.
>
> ...
>
> > >         /* Configure feedback delay */
> > > -       writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK);
> > > +       if (!cs)
> > > +               /* No delay if not defined */
> > > +               writel(0, sdd->regs + S3C64XX_SPI_FB_CLK);
> > > +       else
> > > +               writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK);
> >
> > Looks good to me. I'd add {} braces and change "if (!cs)" to "if
> > (cs)", but that's hair splitting and not worth v4, it's fine as it is.
>
> If you are going to change code, then why not use positive conditions?
>
>   if (cs)
>     ...
>   else {
>     ...
>   }
>

It was already pointed out earlier AFAIR. Personally I don't think
it's too major to send v4. But theoretically speaking, maybe it would
be even better this way:

    u32 fb_delay = cs ? cs->fb_delay & 0x3 : 0;

    /* Configure feedback delay */
    writel(fb_delay, sdd->regs + S3C64XX_SPI_FB_CLK);

Again, I think it's not worth another submission, the same code will
be generated, and style is ok as it is.

> --
> With Best Regards,
> Andy Shevchenko
Mark Brown Jan. 24, 2022, 12:53 p.m. UTC | #4
On Sat, Jan 22, 2022 at 12:18:11AM +0200, Sam Protsenko wrote:

> It was already pointed out earlier AFAIR. Personally I don't think
> it's too major to send v4. But theoretically speaking, maybe it would
> be even better this way:

>     u32 fb_delay = cs ? cs->fb_delay & 0x3 : 0;

Please don't use the terery operator where not required, it's not a
legibility aid.
diff mbox series

Patch

diff --git a/arch/arm/mach-s3c/mach-crag6410-module.c b/arch/arm/mach-s3c/mach-crag6410-module.c
index 407ad493493e..5d1d4b67a4b7 100644
--- a/arch/arm/mach-s3c/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c/mach-crag6410-module.c
@@ -32,10 +32,6 @@ 
 
 #include "crag6410.h"
 
-static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
-	.line = S3C64XX_GPC(3),
-};
-
 static struct wm0010_pdata wm0010_pdata = {
 	.gpio_reset = S3C64XX_GPN(6),
 	.reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */
@@ -49,7 +45,6 @@  static struct spi_board_info wm1253_devs[] = {
 		.chip_select	= 0,
 		.mode		= SPI_MODE_0,
 		.irq		= S3C_EINT(4),
-		.controller_data = &wm0010_spi_csinfo,
 		.platform_data = &wm0010_pdata,
 	},
 };
@@ -62,7 +57,6 @@  static struct spi_board_info balblair_devs[] = {
 		.chip_select	= 0,
 		.mode		= SPI_MODE_0,
 		.irq		= S3C_EINT(4),
-		.controller_data = &wm0010_spi_csinfo,
 		.platform_data = &wm0010_pdata,
 	},
 };
@@ -229,10 +223,6 @@  static struct arizona_pdata wm5102_reva_pdata = {
 	},
 };
 
-static struct s3c64xx_spi_csinfo codec_spi_csinfo = {
-	.line = S3C64XX_GPN(5),
-};
-
 static struct spi_board_info wm5102_reva_spi_devs[] = {
 	[0] = {
 		.modalias	= "wm5102",
@@ -242,7 +232,6 @@  static struct spi_board_info wm5102_reva_spi_devs[] = {
 		.mode		= SPI_MODE_0,
 		.irq		= GLENFARCLAS_PMIC_IRQ_BASE +
 				  WM831X_IRQ_GPIO_2,
-		.controller_data = &codec_spi_csinfo,
 		.platform_data = &wm5102_reva_pdata,
 	},
 };
@@ -275,7 +264,6 @@  static struct spi_board_info wm5102_spi_devs[] = {
 		.mode		= SPI_MODE_0,
 		.irq		= GLENFARCLAS_PMIC_IRQ_BASE +
 				  WM831X_IRQ_GPIO_2,
-		.controller_data = &codec_spi_csinfo,
 		.platform_data = &wm5102_pdata,
 	},
 };
@@ -298,7 +286,6 @@  static struct spi_board_info wm5110_spi_devs[] = {
 		.mode		= SPI_MODE_0,
 		.irq		= GLENFARCLAS_PMIC_IRQ_BASE +
 				  WM831X_IRQ_GPIO_2,
-		.controller_data = &codec_spi_csinfo,
 		.platform_data = &wm5102_reva_pdata,
 	},
 };
diff --git a/arch/arm/mach-s3c/mach-crag6410.c b/arch/arm/mach-s3c/mach-crag6410.c
index 41f0aba2d2fd..e3e0fe897bcc 100644
--- a/arch/arm/mach-s3c/mach-crag6410.c
+++ b/arch/arm/mach-s3c/mach-crag6410.c
@@ -825,6 +825,15 @@  static const struct gpio_led_platform_data gpio_leds_pdata = {
 
 static struct dwc2_hsotg_plat crag6410_hsotg_pdata;
 
+static struct gpiod_lookup_table crag_spi0_gpiod_table = {
+	.dev_id = "s3c6410-spi.0",
+	.table = {
+		GPIO_LOOKUP_IDX("GPIOC", 3, "cs", 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("GPION", 5, "cs", 1, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static void __init crag6410_machine_init(void)
 {
 	/* Open drain IRQs need pullups */
@@ -856,6 +865,8 @@  static void __init crag6410_machine_init(void)
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
 
 	samsung_keypad_set_platdata(&crag6410_keypad_data);
+
+	gpiod_add_lookup_table(&crag_spi0_gpiod_table);
 	s3c64xx_spi0_set_platdata(0, 2);
 
 	pwm_add_table(crag6410_pwm_lookup, ARRAY_SIZE(crag6410_pwm_lookup));
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 8755cd85e83c..3e42cdb19d27 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -13,10 +13,8 @@ 
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/spi/spi.h>
-#include <linux/gpio.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
 
 #include <linux/platform_data/spi-s3c64xx.h>
 
@@ -656,7 +654,11 @@  static int s3c64xx_spi_prepare_message(struct spi_master *master,
 	struct s3c64xx_spi_csinfo *cs = spi->controller_data;
 
 	/* Configure feedback delay */
-	writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK);
+	if (!cs)
+		/* No delay if not defined */
+		writel(0, sdd->regs + S3C64XX_SPI_FB_CLK);
+	else
+		writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK);
 
 	return 0;
 }
@@ -830,34 +832,16 @@  static int s3c64xx_spi_setup(struct spi_device *spi)
 	if (spi->dev.of_node) {
 		cs = s3c64xx_get_slave_ctrldata(spi);
 		spi->controller_data = cs;
-	} else if (cs) {
-		/* On non-DT platforms the SPI core will set spi->cs_gpio
-		 * to -ENOENT. The GPIO pin used to drive the chip select
-		 * is defined by using platform data so spi->cs_gpio value
-		 * has to be override to have the proper GPIO pin number.
-		 */
-		spi->cs_gpio = cs->line;
 	}
 
-	if (IS_ERR_OR_NULL(cs)) {
+	/* NULL is fine, we just avoid using the FB delay (=0) */
+	if (IS_ERR(cs)) {
 		dev_err(&spi->dev, "No CS for SPI(%d)\n", spi->chip_select);
 		return -ENODEV;
 	}
 
-	if (!spi_get_ctldata(spi)) {
-		if (gpio_is_valid(spi->cs_gpio)) {
-			err = gpio_request_one(spi->cs_gpio, GPIOF_OUT_INIT_HIGH,
-					       dev_name(&spi->dev));
-			if (err) {
-				dev_err(&spi->dev,
-					"Failed to get /CS gpio [%d]: %d\n",
-					spi->cs_gpio, err);
-				goto err_gpio_req;
-			}
-		}
-
+	if (!spi_get_ctldata(spi))
 		spi_set_ctldata(spi, cs);
-	}
 
 	pm_runtime_get_sync(&sdd->pdev->dev);
 
@@ -909,11 +893,9 @@  static int s3c64xx_spi_setup(struct spi_device *spi)
 	/* setup() returns with device de-selected */
 	s3c64xx_spi_set_cs(spi, false);
 
-	if (gpio_is_valid(spi->cs_gpio))
-		gpio_free(spi->cs_gpio);
 	spi_set_ctldata(spi, NULL);
 
-err_gpio_req:
+	/* This was dynamically allocated on the DT path */
 	if (spi->dev.of_node)
 		kfree(cs);
 
@@ -924,19 +906,9 @@  static void s3c64xx_spi_cleanup(struct spi_device *spi)
 {
 	struct s3c64xx_spi_csinfo *cs = spi_get_ctldata(spi);
 
-	if (gpio_is_valid(spi->cs_gpio)) {
-		gpio_free(spi->cs_gpio);
-		if (spi->dev.of_node)
-			kfree(cs);
-		else {
-			/* On non-DT platforms, the SPI core sets
-			 * spi->cs_gpio to -ENOENT and .setup()
-			 * overrides it with the GPIO pin value
-			 * passed using platform data.
-			 */
-			spi->cs_gpio = -ENOENT;
-		}
-	}
+	/* This was dynamically allocated on the DT path */
+	if (spi->dev.of_node)
+		kfree(cs);
 
 	spi_set_ctldata(spi, NULL);
 }
@@ -1131,6 +1103,7 @@  static int s3c64xx_spi_probe(struct platform_device *pdev)
 	master->prepare_message = s3c64xx_spi_prepare_message;
 	master->transfer_one = s3c64xx_spi_transfer_one;
 	master->num_chipselect = sci->num_cs;
+	master->use_gpio_descriptors = true;
 	master->dma_alignment = 8;
 	master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) |
 					SPI_BPW_MASK(8);
diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h
index 10890a4b55b9..5df1ace6d2c9 100644
--- a/include/linux/platform_data/spi-s3c64xx.h
+++ b/include/linux/platform_data/spi-s3c64xx.h
@@ -16,7 +16,6 @@  struct platform_device;
  * struct s3c64xx_spi_csinfo - ChipSelect description
  * @fb_delay: Slave specific feedback delay.
  *            Refer to FB_CLK_SEL register definition in SPI chapter.
- * @line: Custom 'identity' of the CS line.
  *
  * This is per SPI-Slave Chipselect information.
  * Allocate and initialize one in machine init code and make the
@@ -24,7 +23,6 @@  struct platform_device;
  */
 struct s3c64xx_spi_csinfo {
 	u8 fb_delay;
-	unsigned line;
 };
 
 /**