new file mode 100644
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,usb3-drd-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC USB 3.0 DRD PHY USB 2.0 PHY
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+ - Marek Szyprowski <m.szyprowski@samsung.com>
+ - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description: |
+ For samsung,exynos5250-usbdrd-phy and samsung,exynos5420-usbdrd-phy
+ compatible PHYs, the second cell in the PHY specifier identifies the
+ PHY id, which is interpreted as follows::
+ 0 - UTMI+ type phy,
+ 1 - PIPE3 type phy.
+
+ For SoCs like Exynos5420 having multiple USB 3.0 DRD PHY controllers,
+ 'usbdrd_phy' nodes should have numbered alias in the aliases node, in the
+ form of usbdrdphyN, N = 0, 1... (depending on number of controllers).
+
+properties:
+ compatible:
+ enum:
+ - samsung,exynos5250-usbdrd-phy
+ - samsung,exynos5420-usbdrd-phy
+ - samsung,exynos5433-usbdrd-phy
+ - samsung,exynos7-usbdrd-phy
+
+ clocks:
+ minItems: 2
+ maxItems: 5
+
+ clock-names:
+ minItems: 2
+ maxItems: 5
+ description: |
+ At least two clocks::
+ - Main PHY clock (same as USB DRD controller i.e. DWC3 IP clock), used
+ for register access.
+ - PHY reference clock (usually crystal clock), used for PHY operations,
+ associated by phy name. It is used to determine bit values for clock
+ settings register. For Exynos5420 this is given as 'sclk_usbphy30'
+ in the CMU.
+
+ "#phy-cells":
+ const: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Any connector to the data bus of this controller should be modelled using
+ the OF graph bindings specified.
+
+ reg:
+ maxItems: 1
+
+ samsung,pmu-syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to PMU system controller interface.
+
+ vbus-supply:
+ description:
+ VBUS power source.
+
+ vbus-boost-supply:
+ description:
+ VBUS Boost 5V power source.
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - "#phy-cells"
+ - reg
+ - samsung,pmu-syscon
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,exynos5433-usbdrd-phy
+ - samsung,exynos7-usbdrd-phy
+ then:
+ properties:
+ clocks:
+ minItems: 5
+ maxItems: 5
+ clock-names:
+ items:
+ - const: phy
+ - const: ref
+ - const: phy_utmi
+ - const: phy_pipe
+ - const: itp
+ else:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 2
+ clock-names:
+ items:
+ - const: phy
+ - const: ref
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos5420.h>
+
+ phy@12100000 {
+ compatible = "samsung,exynos5420-usbdrd-phy";
+ reg = <0x12100000 0x100>;
+ #phy-cells = <1>;
+ clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+ clock-names = "phy", "ref";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ vbus-supply = <&usb300_vbus_reg>;
+ };
deleted file mode 100644
@@ -1,53 +0,0 @@
-Samsung Exynos5 SoC series USB DRD PHY controller
---------------------------------------------------
-
-Required properties:
-- compatible : Should be set to one of the following supported values:
- - "samsung,exynos5250-usbdrd-phy" - for exynos5250 SoC,
- - "samsung,exynos5420-usbdrd-phy" - for exynos5420 SoC.
- - "samsung,exynos5433-usbdrd-phy" - for exynos5433 SoC.
- - "samsung,exynos7-usbdrd-phy" - for exynos7 SoC.
-- reg : Register offset and length of USB DRD PHY register set;
-- clocks: Clock IDs array as required by the controller
-- clock-names: names of clocks correseponding to IDs in the clock property;
- Required clocks:
- - phy: main PHY clock (same as USB DRD controller i.e. DWC3 IP clock),
- used for register access.
- - ref: PHY's reference clock (usually crystal clock), used for
- PHY operations, associated by phy name. It is used to
- determine bit values for clock settings register.
- For Exynos5420 this is given as 'sclk_usbphy30' in CMU.
- - optional clocks: Exynos5433 & Exynos7 SoC has now following additional
- gate clocks available:
- - phy_pipe: for PIPE3 phy
- - phy_utmi: for UTMI+ phy
- - itp: for ITP generation
-- samsung,pmu-syscon: phandle for PMU system controller interface, used to
- control pmu registers for power isolation.
-- #phy-cells : from the generic PHY bindings, must be 1;
-
-For "samsung,exynos5250-usbdrd-phy" and "samsung,exynos5420-usbdrd-phy"
-compatible PHYs, the second cell in the PHY specifier identifies the
-PHY id, which is interpreted as follows:
- 0 - UTMI+ type phy,
- 1 - PIPE3 type phy,
-
-Example:
- usbdrd_phy: usbphy@12100000 {
- compatible = "samsung,exynos5250-usbdrd-phy";
- reg = <0x12100000 0x100>;
- clocks = <&clock 286>, <&clock 1>;
- clock-names = "phy", "ref";
- samsung,pmu-syscon = <&pmu_system_controller>;
- #phy-cells = <1>;
- };
-
-- aliases: For SoCs like Exynos5420 having multiple USB 3.0 DRD PHY controllers,
- 'usbdrd_phy' nodes should have numbered alias in the aliases node,
- in the form of usbdrdphyN, N = 0, 1... (depending on number of
- controllers).
-Example:
- aliases {
- usbdrdphy0 = &usb3_phy0;
- usbdrdphy1 = &usb3_phy1;
- };
Convert the Samsung Exynos USB 3.0 DRD PHY bindings to DT schema format. Except the conversion, add also vbus-supply and vbus-boost-supply properties which were already used by the driver and DTS. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> --- .../bindings/phy/samsung,usb3-drd-phy.yaml | 126 ++++++++++++++++++ .../devicetree/bindings/phy/samsung-phy.txt | 53 -------- 2 files changed, 126 insertions(+), 53 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/samsung-phy.txt