diff mbox series

[2/2] tty: serial: samsung: Add ARTPEC-8 support

Message ID 20220307085053.1636475-3-vincent.whitchurch@axis.com (mailing list archive)
State New
Headers show
Series Add support for ARTPEC-8 UART | expand

Commit Message

Vincent Whitchurch March 7, 2022, 8:50 a.m. UTC
Add support for the UART on the ARTPEC-8 SoC.

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
---
 drivers/tty/serial/Kconfig       |  2 +-
 drivers/tty/serial/samsung_tty.c | 38 ++++++++++++++++++++++++++++++++
 2 files changed, 39 insertions(+), 1 deletion(-)

Comments

Krzysztof Kozlowski March 7, 2022, 9:04 a.m. UTC | #1
On 07/03/2022 09:50, Vincent Whitchurch wrote:
> Add support for the UART on the ARTPEC-8 SoC.
> 
> Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
> ---
>  drivers/tty/serial/Kconfig       |  2 +-
>  drivers/tty/serial/samsung_tty.c | 38 ++++++++++++++++++++++++++++++++
>  2 files changed, 39 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index e952ec5c7a7c..ae120d3d933a 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -237,7 +237,7 @@ config SERIAL_CLPS711X_CONSOLE
>  
>  config SERIAL_SAMSUNG
>  	tristate "Samsung SoC serial support"
> -	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_APPLE || COMPILE_TEST
> +	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_APPLE || ARCH_ARTPEC || COMPILE_TEST
>  	select SERIAL_CORE
>  	help
>  	  Support for the on-chip UARTs on the Samsung
> diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
> index d002a4e48ed9..4f9e74c6bcef 100644
> --- a/drivers/tty/serial/samsung_tty.c
> +++ b/drivers/tty/serial/samsung_tty.c
> @@ -2837,6 +2837,36 @@ static struct s3c24xx_serial_drv_data s5l_serial_drv_data = {
>  #define S5L_SERIAL_DRV_DATA ((kernel_ulong_t)NULL)
>  #endif
>  
> +#if defined(CONFIG_ARCH_ARTPEC)
> +static struct s3c24xx_serial_drv_data artpec8_serial_drv_data = {

This will conflict with my constifying patches:
https://lore.kernel.org/all/20220307080810.53847-1-krzysztof.kozlowski@canonical.com/T/#t

The code itself looks good.


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index e952ec5c7a7c..ae120d3d933a 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -237,7 +237,7 @@  config SERIAL_CLPS711X_CONSOLE
 
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
-	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_APPLE || COMPILE_TEST
+	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_APPLE || ARCH_ARTPEC || COMPILE_TEST
 	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index d002a4e48ed9..4f9e74c6bcef 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -2837,6 +2837,36 @@  static struct s3c24xx_serial_drv_data s5l_serial_drv_data = {
 #define S5L_SERIAL_DRV_DATA ((kernel_ulong_t)NULL)
 #endif
 
+#if defined(CONFIG_ARCH_ARTPEC)
+static struct s3c24xx_serial_drv_data artpec8_serial_drv_data = {
+	.info = &(struct s3c24xx_uart_info) {
+		.name		= "Axis ARTPEC-8 UART",
+		.type		= TYPE_S3C6400,
+		.port_type	= PORT_S3C6400,
+		.fifosize	= 128,
+		.has_divslot	= 1,
+		.rx_fifomask	= S5PV210_UFSTAT_RXMASK,
+		.rx_fifoshift	= S5PV210_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S5PV210_UFSTAT_RXFULL,
+		.tx_fifofull	= S5PV210_UFSTAT_TXFULL,
+		.tx_fifomask	= S5PV210_UFSTAT_TXMASK,
+		.tx_fifoshift	= S5PV210_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL0,
+		.num_clks	= 1,
+		.clksel_mask	= 0,
+		.clksel_shift	= 0,
+	},
+	.def_cfg = &(struct s3c2410_uartcfg) {
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.has_fracval	= 1,
+	}
+};
+#define ARTPEC8_SERIAL_DRV_DATA ((kernel_ulong_t)&artpec8_serial_drv_data)
+#else
+#define ARTPEC8_SERIAL_DRV_DATA ((kernel_ulong_t)NULL)
+#endif
+
 static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
 	{
 		.name		= "s3c2410-uart",
@@ -2866,6 +2896,10 @@  static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
 		.name		= "exynos850-uart",
 		.driver_data	= EXYNOS850_SERIAL_DRV_DATA,
 	},
+	{
+		.name		= "artpec8-uart",
+		.driver_data	= ARTPEC8_SERIAL_DRV_DATA,
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids);
@@ -2888,6 +2922,8 @@  static const struct of_device_id s3c24xx_uart_dt_match[] = {
 		.data = (void *)EXYNOS5433_SERIAL_DRV_DATA },
 	{ .compatible = "apple,s5l-uart",
 		.data = (void *)S5L_SERIAL_DRV_DATA },
+	{ .compatible = "axis,artpec8-uart",
+		.data = (void *)ARTPEC8_SERIAL_DRV_DATA },
 	{ .compatible = "samsung,exynos850-uart",
 		.data = (void *)EXYNOS850_SERIAL_DRV_DATA },
 	{},
@@ -3043,6 +3079,8 @@  OF_EARLYCON_DECLARE(s5pv210, "samsung,s5pv210-uart",
 			s5pv210_early_console_setup);
 OF_EARLYCON_DECLARE(exynos4210, "samsung,exynos4210-uart",
 			s5pv210_early_console_setup);
+OF_EARLYCON_DECLARE(artpec8, "axis,artpec8-uart",
+			s5pv210_early_console_setup);
 
 /* Apple S5L */
 static int __init apple_s5l_early_console_setup(struct earlycon_device *device,