[3/5] drm/rockchip: rk3066_hdmi: Replace drm_detect_hdmi_monitor() with is_hdmi

Commit Message

José Expósito April 21, 2022, 5:07 p.m. UTC

Once EDID is parsed, the monitor HDMI support information is available
through drm_display_info.is_hdmi.

This driver calls drm_detect_hdmi_monitor() to receive the same
information and stores its own cached value, which is less efficient.

Avoid calling drm_detect_hdmi_monitor() and use drm_display_info.is_hdmi
instead and also remove hdmi_data_info.sink_is_hdmi as it is no longer
necessary.

Signed-off-by: José Expósito <[e-mail]>
---
 drivers/gpu/drm/rockchip/rk3066_hdmi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Patch

diff --git a/drivers/gpu/drm/rockchip/rk3066_hdmi.c b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
index 1c546c3a8998..a09dbb7d446a 100644
--- a/drivers/gpu/drm/rockchip/rk3066_hdmi.c
+++ b/drivers/gpu/drm/rockchip/rk3066_hdmi.c
@@ -22,7 +22,6 @@ 
 
 struct hdmi_data_info {
 	int vic; /* The CEA Video ID (VIC) of the current drm display mode. */
-	bool sink_is_hdmi;
 	unsigned int enc_out_format;
 	unsigned int colorimetry;
 };
@@ -317,6 +316,8 @@  static void rk3066_hdmi_config_phy(struct rk3066_hdmi *hdmi)
 static int rk3066_hdmi_setup(struct rk3066_hdmi *hdmi,
 			     struct drm_display_mode *mode)
 {
+	struct drm_display_info *display = &hdmi->connector.display_info;
+
 	hdmi->hdmi_data.vic = drm_match_cea_mode(mode);
 	hdmi->hdmi_data.enc_out_format = HDMI_COLORSPACE_RGB;
 
@@ -349,7 +350,7 @@  static int rk3066_hdmi_setup(struct rk3066_hdmi *hdmi,
 
 	rk3066_hdmi_config_video_timing(hdmi, mode);
 
-	if (hdmi->hdmi_data.sink_is_hdmi) {
+	if (display->is_hdmi) {
 		hdmi_modb(hdmi, HDMI_HDCP_CTRL, HDMI_VIDEO_MODE_MASK,
 			  HDMI_VIDEO_MODE_HDMI);
 		rk3066_hdmi_config_avi(hdmi, mode);
@@ -472,7 +473,6 @@  static int rk3066_hdmi_connector_get_modes(struct drm_connector *connector)
 
 	edid = drm_get_edid(connector, hdmi->ddc);
 	if (edid) {
-		hdmi->hdmi_data.sink_is_hdmi = drm_detect_hdmi_monitor(edid);
 		drm_connector_update_edid_property(connector, edid);
 		ret = drm_add_edid_modes(connector, edid);
 		kfree(edid);