diff mbox series

[v8,23/29] thermal/drivers/broadcom: Use generic thermal_zone_get_trip() function

Message ID 20221003092602.1323944-24-daniel.lezcano@linaro.org (mailing list archive)
State Not Applicable
Headers show
Series Rework the trip points creation | expand

Commit Message

Daniel Lezcano Oct. 3, 2022, 9:25 a.m. UTC
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/thermal/broadcom/bcm2835_thermal.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
index 2c67841a1115..5485e59d03a9 100644
--- a/drivers/thermal/broadcom/bcm2835_thermal.c
+++ b/drivers/thermal/broadcom/bcm2835_thermal.c
@@ -18,6 +18,7 @@ 
 #include <linux/platform_device.h>
 #include <linux/thermal.h>
 
+#include "../thermal_core.h"
 #include "../thermal_hwmon.h"
 
 #define BCM2835_TS_TSENSCTL			0x00
@@ -224,7 +225,8 @@  static int bcm2835_thermal_probe(struct platform_device *pdev)
 	 */
 	val = readl(data->regs + BCM2835_TS_TSENSCTL);
 	if (!(val & BCM2835_TS_TSENSCTL_RSTB)) {
-		int trip_temp, offset, slope;
+		struct thermal_trip trip;
+		int offset, slope;
 
 		slope = thermal_zone_get_slope(tz);
 		offset = thermal_zone_get_offset(tz);
@@ -232,7 +234,7 @@  static int bcm2835_thermal_probe(struct platform_device *pdev)
 		 * For now we deal only with critical, otherwise
 		 * would need to iterate
 		 */
-		err = tz->ops->get_trip_temp(tz, 0, &trip_temp);
+		err = thermal_zone_get_trip(tz, 0, &trip);
 		if (err < 0) {
 			dev_err(&pdev->dev,
 				"Not able to read trip_temp: %d\n",
@@ -249,7 +251,7 @@  static int bcm2835_thermal_probe(struct platform_device *pdev)
 		val |= (0xFE << BCM2835_TS_TSENSCTL_RSTDELAY_SHIFT);
 
 		/*  trip_adc value from info */
-		val |= bcm2835_thermal_temp2adc(trip_temp,
+		val |= bcm2835_thermal_temp2adc(trip.temperature,
 						offset,
 						slope)
 			<< BCM2835_TS_TSENSCTL_THOLD_SHIFT;