diff mbox series

clk: samsung: remove s3c24xx specific pll bits

Message ID 20230105141231.2006353-1-arnd@kernel.org (mailing list archive)
State Accepted
Commit fa0d876fa1b815637b0acf476f3b3054c3528133
Headers show
Series clk: samsung: remove s3c24xx specific pll bits | expand

Commit Message

Arnd Bergmann Jan. 5, 2023, 2:12 p.m. UTC 
From: Arnd Bergmann <arnd@arndb.de>

With the s3c24xx clk driver gone, the portions of the pll driver
for it can also be removed.

Suggested-by: Chanwoo Choi <cwchoi00@gmail.com>
Cc: Chanwoo Choi <cwchoi00@gmail.com>
Link: https://lore.kernel.org/linux-arm-kernel/0e0eff12-d8ea-72e9-d135-4259dda9a750@gmail.com/
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
I'm trying to get the boardfile removal patches into shape for
6.3, and came across the comment from Chanwoo Choi that I had
not addressed yet. I've added this patch to my s3c24xx series now,
to be merged through the soc tree unless there are objections.

 drivers/clk/samsung/clk-pll.c | 181 ----------------------------------
 drivers/clk/samsung/clk-pll.h |  21 ----
 2 files changed, 202 deletions(-)

Comments

Arnd Bergmann Jan. 5, 2023, 10:18 p.m. UTC | #1 
On Thu, Jan 5, 2023, at 20:49, kernel test robot wrote:
> Hi Arnd,
>
> I love your patch! Yet something to improve:
>
> [auto build test ERROR on krzk/for-next]
> [also build test ERROR on linus/master v6.2-rc2 next-20230105]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch#_base_tree_information]
>
>
>>> drivers/clk/samsung/clk-s3c2410.c:123:9: error: implicit declaration of function 'PLL_S3C2410_MPLL_RATE' [-Werror=implicit-function-declaration]
>      123 |         PLL_S3C2410_MPLL_RATE(12 * MHZ, 270000000, 127, 1, 1),
>          |         ^~~~~~~~~~~~~~~~~~~~~

For clarification, the order in the patch series puts this
patch after the one that removes clk-s3c2410.c, so there should
be no bisection problem.

    Arnd
Chanwoo Choi Jan. 10, 2023, 1:11 p.m. UTC | #2 
On 23. 1. 5. 23:12, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
> 
> With the s3c24xx clk driver gone, the portions of the pll driver
> for it can also be removed.
> 
> Suggested-by: Chanwoo Choi <cwchoi00@gmail.com>
> Cc: Chanwoo Choi <cwchoi00@gmail.com>
> Link: https://lore.kernel.org/linux-arm-kernel/0e0eff12-d8ea-72e9-d135-4259dda9a750@gmail.com/
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> I'm trying to get the boardfile removal patches into shape for
> 6.3, and came across the comment from Chanwoo Choi that I had
> not addressed yet. I've added this patch to my s3c24xx series now,
> to be merged through the soc tree unless there are objections.
> 
>  drivers/clk/samsung/clk-pll.c | 181 ----------------------------------
>  drivers/clk/samsung/clk-pll.h |  21 ----
>  2 files changed, 202 deletions(-)

(snip)

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>

Thanks.
Stephen Boyd Jan. 12, 2023, 8:38 p.m. UTC | #3 
Quoting Arnd Bergmann (2023-01-05 06:12:13)
> From: Arnd Bergmann <arnd@arndb.de>
> 
> With the s3c24xx clk driver gone, the portions of the pll driver
> for it can also be removed.
> 
> Suggested-by: Chanwoo Choi <cwchoi00@gmail.com>
> Cc: Chanwoo Choi <cwchoi00@gmail.com>
> Link: https://lore.kernel.org/linux-arm-kernel/0e0eff12-d8ea-72e9-d135-4259dda9a750@gmail.com/
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---

Acked-by: Stephen Boyd <sboyd@kernel.org>
diff mbox series

Patch

diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index 0ff28938943f..df7812371d70 100644
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -940,169 +940,6 @@  static const struct clk_ops samsung_pll6553_clk_ops = {
 	.recalc_rate = samsung_pll6553_recalc_rate,
 };
 
-/*
- * PLL Clock Type of S3C24XX before S3C2443
- */
-
-#define PLLS3C2410_MDIV_MASK		(0xff)
-#define PLLS3C2410_PDIV_MASK		(0x1f)
-#define PLLS3C2410_SDIV_MASK		(0x3)
-#define PLLS3C2410_MDIV_SHIFT		(12)
-#define PLLS3C2410_PDIV_SHIFT		(4)
-#define PLLS3C2410_SDIV_SHIFT		(0)
-
-#define PLLS3C2410_ENABLE_REG_OFFSET	0x10
-
-static unsigned long samsung_s3c2410_pll_recalc_rate(struct clk_hw *hw,
-					unsigned long parent_rate)
-{
-	struct samsung_clk_pll *pll = to_clk_pll(hw);
-	u32 pll_con, mdiv, pdiv, sdiv;
-	u64 fvco = parent_rate;
-
-	pll_con = readl_relaxed(pll->con_reg);
-	mdiv = (pll_con >> PLLS3C2410_MDIV_SHIFT) & PLLS3C2410_MDIV_MASK;
-	pdiv = (pll_con >> PLLS3C2410_PDIV_SHIFT) & PLLS3C2410_PDIV_MASK;
-	sdiv = (pll_con >> PLLS3C2410_SDIV_SHIFT) & PLLS3C2410_SDIV_MASK;
-
-	fvco *= (mdiv + 8);
-	do_div(fvco, (pdiv + 2) << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-static unsigned long samsung_s3c2440_mpll_recalc_rate(struct clk_hw *hw,
-					unsigned long parent_rate)
-{
-	struct samsung_clk_pll *pll = to_clk_pll(hw);
-	u32 pll_con, mdiv, pdiv, sdiv;
-	u64 fvco = parent_rate;
-
-	pll_con = readl_relaxed(pll->con_reg);
-	mdiv = (pll_con >> PLLS3C2410_MDIV_SHIFT) & PLLS3C2410_MDIV_MASK;
-	pdiv = (pll_con >> PLLS3C2410_PDIV_SHIFT) & PLLS3C2410_PDIV_MASK;
-	sdiv = (pll_con >> PLLS3C2410_SDIV_SHIFT) & PLLS3C2410_SDIV_MASK;
-
-	fvco *= (2 * (mdiv + 8));
-	do_div(fvco, (pdiv + 2) << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-static int samsung_s3c2410_pll_set_rate(struct clk_hw *hw, unsigned long drate,
-					unsigned long prate)
-{
-	struct samsung_clk_pll *pll = to_clk_pll(hw);
-	const struct samsung_pll_rate_table *rate;
-	u32 tmp;
-
-	/* Get required rate settings from table */
-	rate = samsung_get_pll_settings(pll, drate);
-	if (!rate) {
-		pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
-			drate, clk_hw_get_name(hw));
-		return -EINVAL;
-	}
-
-	tmp = readl_relaxed(pll->con_reg);
-
-	/* Change PLL PMS values */
-	tmp &= ~((PLLS3C2410_MDIV_MASK << PLLS3C2410_MDIV_SHIFT) |
-			(PLLS3C2410_PDIV_MASK << PLLS3C2410_PDIV_SHIFT) |
-			(PLLS3C2410_SDIV_MASK << PLLS3C2410_SDIV_SHIFT));
-	tmp |= (rate->mdiv << PLLS3C2410_MDIV_SHIFT) |
-			(rate->pdiv << PLLS3C2410_PDIV_SHIFT) |
-			(rate->sdiv << PLLS3C2410_SDIV_SHIFT);
-	writel_relaxed(tmp, pll->con_reg);
-
-	/* Time to settle according to the manual */
-	udelay(300);
-
-	return 0;
-}
-
-static int samsung_s3c2410_pll_enable(struct clk_hw *hw, int bit, bool enable)
-{
-	struct samsung_clk_pll *pll = to_clk_pll(hw);
-	u32 pll_en = readl_relaxed(pll->lock_reg + PLLS3C2410_ENABLE_REG_OFFSET);
-	u32 pll_en_orig = pll_en;
-
-	if (enable)
-		pll_en &= ~BIT(bit);
-	else
-		pll_en |= BIT(bit);
-
-	writel_relaxed(pll_en, pll->lock_reg + PLLS3C2410_ENABLE_REG_OFFSET);
-
-	/* if we started the UPLL, then allow to settle */
-	if (enable && (pll_en_orig & BIT(bit)))
-		udelay(300);
-
-	return 0;
-}
-
-static int samsung_s3c2410_mpll_enable(struct clk_hw *hw)
-{
-	return samsung_s3c2410_pll_enable(hw, 5, true);
-}
-
-static void samsung_s3c2410_mpll_disable(struct clk_hw *hw)
-{
-	samsung_s3c2410_pll_enable(hw, 5, false);
-}
-
-static int samsung_s3c2410_upll_enable(struct clk_hw *hw)
-{
-	return samsung_s3c2410_pll_enable(hw, 7, true);
-}
-
-static void samsung_s3c2410_upll_disable(struct clk_hw *hw)
-{
-	samsung_s3c2410_pll_enable(hw, 7, false);
-}
-
-static const struct clk_ops samsung_s3c2410_mpll_clk_min_ops = {
-	.recalc_rate = samsung_s3c2410_pll_recalc_rate,
-	.enable = samsung_s3c2410_mpll_enable,
-	.disable = samsung_s3c2410_mpll_disable,
-};
-
-static const struct clk_ops samsung_s3c2410_upll_clk_min_ops = {
-	.recalc_rate = samsung_s3c2410_pll_recalc_rate,
-	.enable = samsung_s3c2410_upll_enable,
-	.disable = samsung_s3c2410_upll_disable,
-};
-
-static const struct clk_ops samsung_s3c2440_mpll_clk_min_ops = {
-	.recalc_rate = samsung_s3c2440_mpll_recalc_rate,
-	.enable = samsung_s3c2410_mpll_enable,
-	.disable = samsung_s3c2410_mpll_disable,
-};
-
-static const struct clk_ops samsung_s3c2410_mpll_clk_ops = {
-	.recalc_rate = samsung_s3c2410_pll_recalc_rate,
-	.enable = samsung_s3c2410_mpll_enable,
-	.disable = samsung_s3c2410_mpll_disable,
-	.round_rate = samsung_pll_round_rate,
-	.set_rate = samsung_s3c2410_pll_set_rate,
-};
-
-static const struct clk_ops samsung_s3c2410_upll_clk_ops = {
-	.recalc_rate = samsung_s3c2410_pll_recalc_rate,
-	.enable = samsung_s3c2410_upll_enable,
-	.disable = samsung_s3c2410_upll_disable,
-	.round_rate = samsung_pll_round_rate,
-	.set_rate = samsung_s3c2410_pll_set_rate,
-};
-
-static const struct clk_ops samsung_s3c2440_mpll_clk_ops = {
-	.recalc_rate = samsung_s3c2440_mpll_recalc_rate,
-	.enable = samsung_s3c2410_mpll_enable,
-	.disable = samsung_s3c2410_mpll_disable,
-	.round_rate = samsung_pll_round_rate,
-	.set_rate = samsung_s3c2410_pll_set_rate,
-};
-
 /*
  * PLL2550x Clock Type
  */
@@ -1530,24 +1367,6 @@  static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
 		else
 			init.ops = &samsung_pll46xx_clk_ops;
 		break;
-	case pll_s3c2410_mpll:
-		if (!pll->rate_table)
-			init.ops = &samsung_s3c2410_mpll_clk_min_ops;
-		else
-			init.ops = &samsung_s3c2410_mpll_clk_ops;
-		break;
-	case pll_s3c2410_upll:
-		if (!pll->rate_table)
-			init.ops = &samsung_s3c2410_upll_clk_min_ops;
-		else
-			init.ops = &samsung_s3c2410_upll_clk_ops;
-		break;
-	case pll_s3c2440_mpll:
-		if (!pll->rate_table)
-			init.ops = &samsung_s3c2440_mpll_clk_min_ops;
-		else
-			init.ops = &samsung_s3c2440_mpll_clk_ops;
-		break;
 	case pll_2550x:
 		init.ops = &samsung_pll2550x_clk_ops;
 		break;
diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h
index a9892c2d1f57..5d5a58d40e7e 100644
--- a/drivers/clk/samsung/clk-pll.h
+++ b/drivers/clk/samsung/clk-pll.h
@@ -25,9 +25,6 @@  enum samsung_pll_type {
 	pll_6552,
 	pll_6552_s3c2416,
 	pll_6553,
-	pll_s3c2410_mpll,
-	pll_s3c2410_upll,
-	pll_s3c2440_mpll,
 	pll_2550x,
 	pll_2550xx,
 	pll_2650x,
@@ -56,24 +53,6 @@  enum samsung_pll_type {
 		.sdiv	=	(_s),				\
 	}
 
-#define PLL_S3C2410_MPLL_RATE(_fin, _rate, _m, _p, _s)		\
-	{							\
-		.rate	=	PLL_VALID_RATE(_fin, _rate,	\
-				_m + 8, _p + 2, _s, 0, 16),	\
-		.mdiv	=	(_m),				\
-		.pdiv	=	(_p),				\
-		.sdiv	=	(_s),				\
-	}
-
-#define PLL_S3C2440_MPLL_RATE(_fin, _rate, _m, _p, _s)		\
-	{							\
-		.rate	=	PLL_VALID_RATE(_fin, _rate,	\
-				2 * (_m + 8), _p + 2, _s, 0, 16), \
-		.mdiv	=	(_m),				\
-		.pdiv	=	(_p),				\
-		.sdiv	=	(_s),				\
-	}
-
 #define PLL_36XX_RATE(_fin, _rate, _m, _p, _s, _k)		\
 	{							\
 		.rate	=	PLL_VALID_RATE(_fin, _rate,	\