| Message ID | 20230211064006.14981-5-semen.protsenko@linaro.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | clk: samsung: exynos850: Add missing clocks for PM | expand |
> -----Original Message----- > From: Sam Protsenko <semen.protsenko@linaro.org> > Sent: Saturday, February 11, 2023 3:40 PM > To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>; Chanwoo Choi > <cw00.choi@samsung.com>; Sylwester Nawrocki <s.nawrocki@samsung.com>; Rob > Herring <robh+dt@kernel.org> > Cc: David Virag <virag.david003@gmail.com>; Chanho Park > <chanho61.park@samsung.com>; Alim Akhtar <alim.akhtar@samsung.com>; Sumit > Semwal <sumit.semwal@linaro.org>; Tomasz Figa <tomasz.figa@gmail.com>; > Michael Turquette <mturquette@baylibre.com>; Stephen Boyd > <sboyd@kernel.org>; linux-samsung-soc@vger.kernel.org; linux- > clk@vger.kernel.org; devicetree@vger.kernel.org; linux-arm- > kernel@lists.infradead.org; linux-kernel@vger.kernel.org > Subject: [PATCH 4/6] clk: samsung: exynos850: Implement CMU_G3D domain > > CMU_G3D clock domain provides clocks for Mali-G52 GPU and bus clocks for > BLK_G3D. > > This patch adds next clocks: > - bus clocks in CMU_TOP for CMU_G3D > - all internal CMU_G3D clocks > - leaf clocks for GPU, TZPC (TrustZone Protection Controller) and > SysReg > > G3D_CMU_G3D clock was marked as CLK_IGNORE_UNUSED, as system hangs on boot > otherwise. > > Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> > --- > drivers/clk/samsung/clk-exynos850.c | 121 ++++++++++++++++++++++++++++ > 1 file changed, 121 insertions(+) > > diff --git a/drivers/clk/samsung/clk-exynos850.c > b/drivers/clk/samsung/clk-exynos850.c > index 541761e96aeb..a24eff42baae 100644 > --- a/drivers/clk/samsung/clk-exynos850.c > +++ b/drivers/clk/samsung/clk-exynos850.c > @@ -36,6 +36,7 @@ > #define CLK_CON_MUX_MUX_CLKCMU_CORE_MMC_EMBD 0x101c > #define CLK_CON_MUX_MUX_CLKCMU_CORE_SSS 0x1020 > #define CLK_CON_MUX_MUX_CLKCMU_DPU 0x1034 > +#define CLK_CON_MUX_MUX_CLKCMU_G3D_SWITCH 0x1038 > #define CLK_CON_MUX_MUX_CLKCMU_HSI_BUS 0x103c > #define CLK_CON_MUX_MUX_CLKCMU_HSI_MMC_CARD 0x1040 > #define CLK_CON_MUX_MUX_CLKCMU_HSI_USB20DRD 0x1044 > @@ -57,6 +58,7 @@ > #define CLK_CON_DIV_CLKCMU_CORE_MMC_EMBD 0x1828 > #define CLK_CON_DIV_CLKCMU_CORE_SSS 0x182c > #define CLK_CON_DIV_CLKCMU_DPU 0x1840 > +#define CLK_CON_DIV_CLKCMU_G3D_SWITCH 0x1844 > #define CLK_CON_DIV_CLKCMU_HSI_BUS 0x1848 > #define CLK_CON_DIV_CLKCMU_HSI_MMC_CARD 0x184c > #define CLK_CON_DIV_CLKCMU_HSI_USB20DRD 0x1850 > @@ -84,6 +86,7 @@ > #define CLK_CON_GAT_GATE_CLKCMU_CORE_MMC_EMBD 0x2024 > #define CLK_CON_GAT_GATE_CLKCMU_CORE_SSS 0x2028 > #define CLK_CON_GAT_GATE_CLKCMU_DPU 0x203c > +#define CLK_CON_GAT_GATE_CLKCMU_G3D_SWITCH 0x2040 > #define CLK_CON_GAT_GATE_CLKCMU_HSI_BUS 0x2044 > #define CLK_CON_GAT_GATE_CLKCMU_HSI_MMC_CARD 0x2048 > #define CLK_CON_GAT_GATE_CLKCMU_HSI_USB20DRD 0x204c > @@ -116,6 +119,7 @@ static const unsigned long top_clk_regs[] __initconst > = { > CLK_CON_MUX_MUX_CLKCMU_CORE_MMC_EMBD, > CLK_CON_MUX_MUX_CLKCMU_CORE_SSS, > CLK_CON_MUX_MUX_CLKCMU_DPU, > + CLK_CON_MUX_MUX_CLKCMU_G3D_SWITCH, > CLK_CON_MUX_MUX_CLKCMU_HSI_BUS, > CLK_CON_MUX_MUX_CLKCMU_HSI_MMC_CARD, > CLK_CON_MUX_MUX_CLKCMU_HSI_USB20DRD, > @@ -137,6 +141,7 @@ static const unsigned long top_clk_regs[] __initconst > = { > CLK_CON_DIV_CLKCMU_CORE_MMC_EMBD, > CLK_CON_DIV_CLKCMU_CORE_SSS, > CLK_CON_DIV_CLKCMU_DPU, > + CLK_CON_DIV_CLKCMU_G3D_SWITCH, > CLK_CON_DIV_CLKCMU_HSI_BUS, > CLK_CON_DIV_CLKCMU_HSI_MMC_CARD, > CLK_CON_DIV_CLKCMU_HSI_USB20DRD, > @@ -164,6 +169,7 @@ static const unsigned long top_clk_regs[] __initconst > = { > CLK_CON_GAT_GATE_CLKCMU_CORE_MMC_EMBD, > CLK_CON_GAT_GATE_CLKCMU_CORE_SSS, > CLK_CON_GAT_GATE_CLKCMU_DPU, > + CLK_CON_GAT_GATE_CLKCMU_G3D_SWITCH, > CLK_CON_GAT_GATE_CLKCMU_HSI_BUS, > CLK_CON_GAT_GATE_CLKCMU_HSI_MMC_CARD, > CLK_CON_GAT_GATE_CLKCMU_HSI_USB20DRD, > @@ -216,6 +222,9 @@ PNAME(mout_core_mmc_embd_p) = { "oscclk", > "dout_shared0_div2", > "oscclk", "oscclk" }; > PNAME(mout_core_sss_p) = { "dout_shared0_div3", > "dout_shared1_div3", > "dout_shared0_div4", "dout_shared1_div4" }; > +/* List of parent clocks for Muxes in CMU_TOP: for CMU_G3D */ > +PNAME(mout_g3d_switch_p) = { "dout_shared0_div2", "dout_shared1_div2", > + "dout_shared0_div3", "dout_shared1_div3" }; > /* List of parent clocks for Muxes in CMU_TOP: for CMU_HSI */ > PNAME(mout_hsi_bus_p) = { "dout_shared0_div2", > "dout_shared1_div2" }; > PNAME(mout_hsi_mmc_card_p) = { "oscclk", "dout_shared0_div2", > @@ -283,6 +292,10 @@ static const struct samsung_mux_clock top_mux_clks[] > __initconst = { > MUX(CLK_MOUT_DPU, "mout_dpu", mout_dpu_p, > CLK_CON_MUX_MUX_CLKCMU_DPU, 0, 2), > > + /* G3D */ > + MUX(CLK_MOUT_G3D_SWITCH, "mout_g3d_switch", mout_g3d_switch_p, > + CLK_CON_MUX_MUX_CLKCMU_G3D_SWITCH, 0, 2), > + > /* HSI */ > MUX(CLK_MOUT_HSI_BUS, "mout_hsi_bus", mout_hsi_bus_p, > CLK_CON_MUX_MUX_CLKCMU_HSI_BUS, 0, 1), @@ -357,6 +370,10 @@ > static const struct samsung_div_clock top_div_clks[] __initconst = { > DIV(CLK_DOUT_DPU, "dout_dpu", "gout_dpu", > CLK_CON_DIV_CLKCMU_DPU, 0, 4), > > + /* G3D */ > + DIV(CLK_DOUT_G3D_SWITCH, "dout_g3d_switch", "gout_g3d_switch", > + CLK_CON_DIV_CLKCMU_G3D_SWITCH, 0, 3), > + > /* HSI */ > DIV(CLK_DOUT_HSI_BUS, "dout_hsi_bus", "gout_hsi_bus", > CLK_CON_DIV_CLKCMU_HSI_BUS, 0, 4), @@ -417,6 +434,10 @@ static > const struct samsung_gate_clock top_gate_clks[] __initconst = { > GATE(CLK_GOUT_DPU, "gout_dpu", "mout_dpu", > CLK_CON_GAT_GATE_CLKCMU_DPU, 21, 0, 0), > > + /* G3D */ > + GATE(CLK_GOUT_G3D_SWITCH, "gout_g3d_switch", "mout_g3d_switch", > + CLK_CON_GAT_GATE_CLKCMU_G3D_SWITCH, 21, 0, 0), > + > /* HSI */ > GATE(CLK_GOUT_HSI_BUS, "gout_hsi_bus", "mout_hsi_bus", > CLK_CON_GAT_GATE_CLKCMU_HSI_BUS, 21, 0, 0), @@ -992,6 +1013,103 > @@ static const struct samsung_cmu_info cmgp_cmu_info __initconst = { > .clk_name = "gout_clkcmu_cmgp_bus", > }; > > +/* ---- CMU_G3D > +------------------------------------------------------------- */ > + > +/* Register Offset definitions for CMU_G3D (0x11400000) */ > +#define PLL_LOCKTIME_PLL_G3D 0x0000 > +#define PLL_CON0_PLL_G3D 0x0100 > +#define PLL_CON3_PLL_G3D 0x010c > +#define PLL_CON0_MUX_CLKCMU_G3D_SWITCH_USER 0x0600 > +#define CLK_CON_MUX_MUX_CLK_G3D_BUSD 0x1000 > +#define CLK_CON_DIV_DIV_CLK_G3D_BUSP 0x1804 > +#define CLK_CON_GAT_CLK_G3D_CMU_G3D_PCLK 0x2000 > +#define CLK_CON_GAT_CLK_G3D_GPU_CLK 0x2004 > +#define CLK_CON_GAT_GOUT_G3D_TZPC_PCLK 0x200c > +#define CLK_CON_GAT_GOUT_G3D_GRAY2BIN_CLK 0x2010 > +#define CLK_CON_GAT_GOUT_G3D_BUSD_CLK 0x2024 > +#define CLK_CON_GAT_GOUT_G3D_BUSP_CLK 0x2028 > +#define CLK_CON_GAT_GOUT_G3D_SYSREG_PCLK 0x202c > + > + Nit: double empty lines. Otherwise, looks good to me :) Reviewed-by: Chanho Park <chanho61.park@samsung.com> > +static const unsigned long g3d_clk_regs[] __initconst = { > + PLL_LOCKTIME_PLL_G3D, > + PLL_CON0_PLL_G3D, > + PLL_CON3_PLL_G3D, > + PLL_CON0_MUX_CLKCMU_G3D_SWITCH_USER, > + CLK_CON_MUX_MUX_CLK_G3D_BUSD, > + CLK_CON_DIV_DIV_CLK_G3D_BUSP, > + CLK_CON_GAT_CLK_G3D_CMU_G3D_PCLK, > + CLK_CON_GAT_CLK_G3D_GPU_CLK, > + CLK_CON_GAT_GOUT_G3D_TZPC_PCLK, > + CLK_CON_GAT_GOUT_G3D_GRAY2BIN_CLK, > + CLK_CON_GAT_GOUT_G3D_BUSD_CLK, > + CLK_CON_GAT_GOUT_G3D_BUSP_CLK, > + CLK_CON_GAT_GOUT_G3D_SYSREG_PCLK, > +}; > + > +/* List of parent clocks for Muxes in CMU_G3D */ > +PNAME(mout_g3d_pll_p) = { "oscclk", "fout_g3d_pll" }; > +PNAME(mout_g3d_switch_user_p) = { "oscclk", "dout_g3d_switch" }; > +PNAME(mout_g3d_busd_p) = { "mout_g3d_pll", > "mout_g3d_switch_user" }; > + > +/* > + * Do not provide PLL table to PLL_G3D, as MANUAL_PLL_CTRL bit is not > +set > + * for that PLL by default, so set_rate operation would fail. > + */ > +static const struct samsung_pll_clock g3d_pll_clks[] __initconst = { > + PLL(pll_0818x, CLK_FOUT_G3D_PLL, "fout_g3d_pll", "oscclk", > + PLL_LOCKTIME_PLL_G3D, PLL_CON3_PLL_G3D, NULL), }; > + > +static const struct samsung_mux_clock g3d_mux_clks[] __initconst = { > + MUX(CLK_MOUT_G3D_PLL, "mout_g3d_pll", mout_g3d_pll_p, > + PLL_CON0_PLL_G3D, 4, 1), > + MUX(CLK_MOUT_G3D_SWITCH_USER, "mout_g3d_switch_user", > + mout_g3d_switch_user_p, > + PLL_CON0_MUX_CLKCMU_G3D_SWITCH_USER, 4, 1), > + MUX(CLK_MOUT_G3D_BUSD, "mout_g3d_busd", mout_g3d_busd_p, > + CLK_CON_MUX_MUX_CLK_G3D_BUSD, 0, 1), }; > + > +static const struct samsung_div_clock g3d_div_clks[] __initconst = { > + DIV(CLK_DOUT_G3D_BUSP, "dout_g3d_busp", "mout_g3d_busd", > + CLK_CON_DIV_DIV_CLK_G3D_BUSP, 0, 3), }; > + > +static const struct samsung_gate_clock g3d_gate_clks[] __initconst = { > + GATE(CLK_GOUT_G3D_CMU_G3D_PCLK, "gout_g3d_cmu_g3d_pclk", > + "dout_g3d_busp", > + CLK_CON_GAT_CLK_G3D_CMU_G3D_PCLK, 21, CLK_IGNORE_UNUSED, 0), > + GATE(CLK_GOUT_G3D_GPU_CLK, "gout_g3d_gpu_clk", "mout_g3d_busd", > + CLK_CON_GAT_CLK_G3D_GPU_CLK, 21, 0, 0), > + GATE(CLK_GOUT_G3D_TZPC_PCLK, "gout_g3d_tzpc_pclk", "dout_g3d_busp", > + CLK_CON_GAT_GOUT_G3D_TZPC_PCLK, 21, 0, 0), > + GATE(CLK_GOUT_G3D_GRAY2BIN_CLK, "gout_g3d_gray2bin_clk", > + "mout_g3d_busd", > + CLK_CON_GAT_GOUT_G3D_GRAY2BIN_CLK, 21, 0, 0), > + GATE(CLK_GOUT_G3D_BUSD_CLK, "gout_g3d_busd_clk", "mout_g3d_busd", > + CLK_CON_GAT_GOUT_G3D_BUSD_CLK, 21, 0, 0), > + GATE(CLK_GOUT_G3D_BUSP_CLK, "gout_g3d_busp_clk", "dout_g3d_busp", > + CLK_CON_GAT_GOUT_G3D_BUSP_CLK, 21, 0, 0), > + GATE(CLK_GOUT_G3D_SYSREG_PCLK, "gout_g3d_sysreg_pclk", > "dout_g3d_busp", > + CLK_CON_GAT_GOUT_G3D_SYSREG_PCLK, 21, 0, 0), }; > + > +static const struct samsung_cmu_info g3d_cmu_info __initconst = { > + .pll_clks = g3d_pll_clks, > + .nr_pll_clks = ARRAY_SIZE(g3d_pll_clks), > + .mux_clks = g3d_mux_clks, > + .nr_mux_clks = ARRAY_SIZE(g3d_mux_clks), > + .div_clks = g3d_div_clks, > + .nr_div_clks = ARRAY_SIZE(g3d_div_clks), > + .gate_clks = g3d_gate_clks, > + .nr_gate_clks = ARRAY_SIZE(g3d_gate_clks), > + .nr_clk_ids = G3D_NR_CLK, > + .clk_regs = g3d_clk_regs, > + .nr_clk_regs = ARRAY_SIZE(g3d_clk_regs), > + .clk_name = "dout_g3d_switch", > +}; > + > /* ---- CMU_HSI --------------------------------------------------------- > ---- */ > > /* Register Offset definitions for CMU_HSI (0x13400000) */ @@ -1700,6 > +1818,9 @@ static const struct of_device_id exynos850_cmu_of_match[] = { > }, { > .compatible = "samsung,exynos850-cmu-cmgp", > .data = &cmgp_cmu_info, > + }, { > + .compatible = "samsung,exynos850-cmu-g3d", > + .data = &g3d_cmu_info, > }, { > .compatible = "samsung,exynos850-cmu-hsi", > .data = &hsi_cmu_info, > -- > 2.39.1
diff --git a/drivers/clk/samsung/clk-exynos850.c b/drivers/clk/samsung/clk-exynos850.c index 541761e96aeb..a24eff42baae 100644 --- a/drivers/clk/samsung/clk-exynos850.c +++ b/drivers/clk/samsung/clk-exynos850.c @@ -36,6 +36,7 @@ #define CLK_CON_MUX_MUX_CLKCMU_CORE_MMC_EMBD 0x101c #define CLK_CON_MUX_MUX_CLKCMU_CORE_SSS 0x1020 #define CLK_CON_MUX_MUX_CLKCMU_DPU 0x1034 +#define CLK_CON_MUX_MUX_CLKCMU_G3D_SWITCH 0x1038 #define CLK_CON_MUX_MUX_CLKCMU_HSI_BUS 0x103c #define CLK_CON_MUX_MUX_CLKCMU_HSI_MMC_CARD 0x1040 #define CLK_CON_MUX_MUX_CLKCMU_HSI_USB20DRD 0x1044 @@ -57,6 +58,7 @@ #define CLK_CON_DIV_CLKCMU_CORE_MMC_EMBD 0x1828 #define CLK_CON_DIV_CLKCMU_CORE_SSS 0x182c #define CLK_CON_DIV_CLKCMU_DPU 0x1840 +#define CLK_CON_DIV_CLKCMU_G3D_SWITCH 0x1844 #define CLK_CON_DIV_CLKCMU_HSI_BUS 0x1848 #define CLK_CON_DIV_CLKCMU_HSI_MMC_CARD 0x184c #define CLK_CON_DIV_CLKCMU_HSI_USB20DRD 0x1850 @@ -84,6 +86,7 @@ #define CLK_CON_GAT_GATE_CLKCMU_CORE_MMC_EMBD 0x2024 #define CLK_CON_GAT_GATE_CLKCMU_CORE_SSS 0x2028 #define CLK_CON_GAT_GATE_CLKCMU_DPU 0x203c +#define CLK_CON_GAT_GATE_CLKCMU_G3D_SWITCH 0x2040 #define CLK_CON_GAT_GATE_CLKCMU_HSI_BUS 0x2044 #define CLK_CON_GAT_GATE_CLKCMU_HSI_MMC_CARD 0x2048 #define CLK_CON_GAT_GATE_CLKCMU_HSI_USB20DRD 0x204c @@ -116,6 +119,7 @@ static const unsigned long top_clk_regs[] __initconst = { CLK_CON_MUX_MUX_CLKCMU_CORE_MMC_EMBD, CLK_CON_MUX_MUX_CLKCMU_CORE_SSS, CLK_CON_MUX_MUX_CLKCMU_DPU, + CLK_CON_MUX_MUX_CLKCMU_G3D_SWITCH, CLK_CON_MUX_MUX_CLKCMU_HSI_BUS, CLK_CON_MUX_MUX_CLKCMU_HSI_MMC_CARD, CLK_CON_MUX_MUX_CLKCMU_HSI_USB20DRD, @@ -137,6 +141,7 @@ static const unsigned long top_clk_regs[] __initconst = { CLK_CON_DIV_CLKCMU_CORE_MMC_EMBD, CLK_CON_DIV_CLKCMU_CORE_SSS, CLK_CON_DIV_CLKCMU_DPU, + CLK_CON_DIV_CLKCMU_G3D_SWITCH, CLK_CON_DIV_CLKCMU_HSI_BUS, CLK_CON_DIV_CLKCMU_HSI_MMC_CARD, CLK_CON_DIV_CLKCMU_HSI_USB20DRD, @@ -164,6 +169,7 @@ static const unsigned long top_clk_regs[] __initconst = { CLK_CON_GAT_GATE_CLKCMU_CORE_MMC_EMBD, CLK_CON_GAT_GATE_CLKCMU_CORE_SSS, CLK_CON_GAT_GATE_CLKCMU_DPU, + CLK_CON_GAT_GATE_CLKCMU_G3D_SWITCH, CLK_CON_GAT_GATE_CLKCMU_HSI_BUS, CLK_CON_GAT_GATE_CLKCMU_HSI_MMC_CARD, CLK_CON_GAT_GATE_CLKCMU_HSI_USB20DRD, @@ -216,6 +222,9 @@ PNAME(mout_core_mmc_embd_p) = { "oscclk", "dout_shared0_div2", "oscclk", "oscclk" }; PNAME(mout_core_sss_p) = { "dout_shared0_div3", "dout_shared1_div3", "dout_shared0_div4", "dout_shared1_div4" }; +/* List of parent clocks for Muxes in CMU_TOP: for CMU_G3D */ +PNAME(mout_g3d_switch_p) = { "dout_shared0_div2", "dout_shared1_div2", + "dout_shared0_div3", "dout_shared1_div3" }; /* List of parent clocks for Muxes in CMU_TOP: for CMU_HSI */ PNAME(mout_hsi_bus_p) = { "dout_shared0_div2", "dout_shared1_div2" }; PNAME(mout_hsi_mmc_card_p) = { "oscclk", "dout_shared0_div2", @@ -283,6 +292,10 @@ static const struct samsung_mux_clock top_mux_clks[] __initconst = { MUX(CLK_MOUT_DPU, "mout_dpu", mout_dpu_p, CLK_CON_MUX_MUX_CLKCMU_DPU, 0, 2), + /* G3D */ + MUX(CLK_MOUT_G3D_SWITCH, "mout_g3d_switch", mout_g3d_switch_p, + CLK_CON_MUX_MUX_CLKCMU_G3D_SWITCH, 0, 2), + /* HSI */ MUX(CLK_MOUT_HSI_BUS, "mout_hsi_bus", mout_hsi_bus_p, CLK_CON_MUX_MUX_CLKCMU_HSI_BUS, 0, 1), @@ -357,6 +370,10 @@ static const struct samsung_div_clock top_div_clks[] __initconst = { DIV(CLK_DOUT_DPU, "dout_dpu", "gout_dpu", CLK_CON_DIV_CLKCMU_DPU, 0, 4), + /* G3D */ + DIV(CLK_DOUT_G3D_SWITCH, "dout_g3d_switch", "gout_g3d_switch", + CLK_CON_DIV_CLKCMU_G3D_SWITCH, 0, 3), + /* HSI */ DIV(CLK_DOUT_HSI_BUS, "dout_hsi_bus", "gout_hsi_bus", CLK_CON_DIV_CLKCMU_HSI_BUS, 0, 4), @@ -417,6 +434,10 @@ static const struct samsung_gate_clock top_gate_clks[] __initconst = { GATE(CLK_GOUT_DPU, "gout_dpu", "mout_dpu", CLK_CON_GAT_GATE_CLKCMU_DPU, 21, 0, 0), + /* G3D */ + GATE(CLK_GOUT_G3D_SWITCH, "gout_g3d_switch", "mout_g3d_switch", + CLK_CON_GAT_GATE_CLKCMU_G3D_SWITCH, 21, 0, 0), + /* HSI */ GATE(CLK_GOUT_HSI_BUS, "gout_hsi_bus", "mout_hsi_bus", CLK_CON_GAT_GATE_CLKCMU_HSI_BUS, 21, 0, 0), @@ -992,6 +1013,103 @@ static const struct samsung_cmu_info cmgp_cmu_info __initconst = { .clk_name = "gout_clkcmu_cmgp_bus", }; +/* ---- CMU_G3D ------------------------------------------------------------- */ + +/* Register Offset definitions for CMU_G3D (0x11400000) */ +#define PLL_LOCKTIME_PLL_G3D 0x0000 +#define PLL_CON0_PLL_G3D 0x0100 +#define PLL_CON3_PLL_G3D 0x010c +#define PLL_CON0_MUX_CLKCMU_G3D_SWITCH_USER 0x0600 +#define CLK_CON_MUX_MUX_CLK_G3D_BUSD 0x1000 +#define CLK_CON_DIV_DIV_CLK_G3D_BUSP 0x1804 +#define CLK_CON_GAT_CLK_G3D_CMU_G3D_PCLK 0x2000 +#define CLK_CON_GAT_CLK_G3D_GPU_CLK 0x2004 +#define CLK_CON_GAT_GOUT_G3D_TZPC_PCLK 0x200c +#define CLK_CON_GAT_GOUT_G3D_GRAY2BIN_CLK 0x2010 +#define CLK_CON_GAT_GOUT_G3D_BUSD_CLK 0x2024 +#define CLK_CON_GAT_GOUT_G3D_BUSP_CLK 0x2028 +#define CLK_CON_GAT_GOUT_G3D_SYSREG_PCLK 0x202c + + +static const unsigned long g3d_clk_regs[] __initconst = { + PLL_LOCKTIME_PLL_G3D, + PLL_CON0_PLL_G3D, + PLL_CON3_PLL_G3D, + PLL_CON0_MUX_CLKCMU_G3D_SWITCH_USER, + CLK_CON_MUX_MUX_CLK_G3D_BUSD, + CLK_CON_DIV_DIV_CLK_G3D_BUSP, + CLK_CON_GAT_CLK_G3D_CMU_G3D_PCLK, + CLK_CON_GAT_CLK_G3D_GPU_CLK, + CLK_CON_GAT_GOUT_G3D_TZPC_PCLK, + CLK_CON_GAT_GOUT_G3D_GRAY2BIN_CLK, + CLK_CON_GAT_GOUT_G3D_BUSD_CLK, + CLK_CON_GAT_GOUT_G3D_BUSP_CLK, + CLK_CON_GAT_GOUT_G3D_SYSREG_PCLK, +}; + +/* List of parent clocks for Muxes in CMU_G3D */ +PNAME(mout_g3d_pll_p) = { "oscclk", "fout_g3d_pll" }; +PNAME(mout_g3d_switch_user_p) = { "oscclk", "dout_g3d_switch" }; +PNAME(mout_g3d_busd_p) = { "mout_g3d_pll", "mout_g3d_switch_user" }; + +/* + * Do not provide PLL table to PLL_G3D, as MANUAL_PLL_CTRL bit is not set + * for that PLL by default, so set_rate operation would fail. + */ +static const struct samsung_pll_clock g3d_pll_clks[] __initconst = { + PLL(pll_0818x, CLK_FOUT_G3D_PLL, "fout_g3d_pll", "oscclk", + PLL_LOCKTIME_PLL_G3D, PLL_CON3_PLL_G3D, NULL), +}; + +static const struct samsung_mux_clock g3d_mux_clks[] __initconst = { + MUX(CLK_MOUT_G3D_PLL, "mout_g3d_pll", mout_g3d_pll_p, + PLL_CON0_PLL_G3D, 4, 1), + MUX(CLK_MOUT_G3D_SWITCH_USER, "mout_g3d_switch_user", + mout_g3d_switch_user_p, + PLL_CON0_MUX_CLKCMU_G3D_SWITCH_USER, 4, 1), + MUX(CLK_MOUT_G3D_BUSD, "mout_g3d_busd", mout_g3d_busd_p, + CLK_CON_MUX_MUX_CLK_G3D_BUSD, 0, 1), +}; + +static const struct samsung_div_clock g3d_div_clks[] __initconst = { + DIV(CLK_DOUT_G3D_BUSP, "dout_g3d_busp", "mout_g3d_busd", + CLK_CON_DIV_DIV_CLK_G3D_BUSP, 0, 3), +}; + +static const struct samsung_gate_clock g3d_gate_clks[] __initconst = { + GATE(CLK_GOUT_G3D_CMU_G3D_PCLK, "gout_g3d_cmu_g3d_pclk", + "dout_g3d_busp", + CLK_CON_GAT_CLK_G3D_CMU_G3D_PCLK, 21, CLK_IGNORE_UNUSED, 0), + GATE(CLK_GOUT_G3D_GPU_CLK, "gout_g3d_gpu_clk", "mout_g3d_busd", + CLK_CON_GAT_CLK_G3D_GPU_CLK, 21, 0, 0), + GATE(CLK_GOUT_G3D_TZPC_PCLK, "gout_g3d_tzpc_pclk", "dout_g3d_busp", + CLK_CON_GAT_GOUT_G3D_TZPC_PCLK, 21, 0, 0), + GATE(CLK_GOUT_G3D_GRAY2BIN_CLK, "gout_g3d_gray2bin_clk", + "mout_g3d_busd", + CLK_CON_GAT_GOUT_G3D_GRAY2BIN_CLK, 21, 0, 0), + GATE(CLK_GOUT_G3D_BUSD_CLK, "gout_g3d_busd_clk", "mout_g3d_busd", + CLK_CON_GAT_GOUT_G3D_BUSD_CLK, 21, 0, 0), + GATE(CLK_GOUT_G3D_BUSP_CLK, "gout_g3d_busp_clk", "dout_g3d_busp", + CLK_CON_GAT_GOUT_G3D_BUSP_CLK, 21, 0, 0), + GATE(CLK_GOUT_G3D_SYSREG_PCLK, "gout_g3d_sysreg_pclk", "dout_g3d_busp", + CLK_CON_GAT_GOUT_G3D_SYSREG_PCLK, 21, 0, 0), +}; + +static const struct samsung_cmu_info g3d_cmu_info __initconst = { + .pll_clks = g3d_pll_clks, + .nr_pll_clks = ARRAY_SIZE(g3d_pll_clks), + .mux_clks = g3d_mux_clks, + .nr_mux_clks = ARRAY_SIZE(g3d_mux_clks), + .div_clks = g3d_div_clks, + .nr_div_clks = ARRAY_SIZE(g3d_div_clks), + .gate_clks = g3d_gate_clks, + .nr_gate_clks = ARRAY_SIZE(g3d_gate_clks), + .nr_clk_ids = G3D_NR_CLK, + .clk_regs = g3d_clk_regs, + .nr_clk_regs = ARRAY_SIZE(g3d_clk_regs), + .clk_name = "dout_g3d_switch", +}; + /* ---- CMU_HSI ------------------------------------------------------------- */ /* Register Offset definitions for CMU_HSI (0x13400000) */ @@ -1700,6 +1818,9 @@ static const struct of_device_id exynos850_cmu_of_match[] = { }, { .compatible = "samsung,exynos850-cmu-cmgp", .data = &cmgp_cmu_info, + }, { + .compatible = "samsung,exynos850-cmu-g3d", + .data = &g3d_cmu_info, }, { .compatible = "samsung,exynos850-cmu-hsi", .data = &hsi_cmu_info,
CMU_G3D clock domain provides clocks for Mali-G52 GPU and bus clocks for BLK_G3D. This patch adds next clocks: - bus clocks in CMU_TOP for CMU_G3D - all internal CMU_G3D clocks - leaf clocks for GPU, TZPC (TrustZone Protection Controller) and SysReg G3D_CMU_G3D clock was marked as CLK_IGNORE_UNUSED, as system hangs on boot otherwise. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> --- drivers/clk/samsung/clk-exynos850.c | 121 ++++++++++++++++++++++++++++ 1 file changed, 121 insertions(+)