diff mbox series

[v2] ARM: dts: samsung: exynos4412-midas: add USB connector and USB OTG

Message ID 20230723142417.97734-1-krzysztof.kozlowski@linaro.org (mailing list archive)
State Accepted
Headers show
Series [v2] ARM: dts: samsung: exynos4412-midas: add USB connector and USB OTG | expand

Commit Message

Krzysztof Kozlowski July 23, 2023, 2:24 p.m. UTC
Add full description of USB-MUIC (MAX77693 MUIC) and MUIC-MHL
connections, along with proper USB connector and OTG mode for DWC2 USB
controller.

This fixes dtc W=1 warnings:

  Warning (graph_child_address): /i2c-mhl/hdmi-bridge@39/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary

Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: replicant@osuosl.org
Cc: phone-devel@vger.kernel.org
Cc: ~postmarketos/upstreaming@lists.sr.ht
Cc: Martin Jücker <martin.juecker@gmail.com>
Cc: Henrik Grimler <henrik@grimler.se>
Cc: Artur Weber <aweber.kernel@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes in v2:
1. Put connector node in the muic node (Henrik)

Not tested on hardware. Please kindly check if peripheral mode is not
broken. Or maybe OTG started to work?
---
 .../boot/dts/samsung/exynos4412-midas.dtsi    | 50 ++++++++++++++++++-
 1 file changed, 49 insertions(+), 1 deletion(-)

Comments

Henrik Grimler July 25, 2023, 7:15 p.m. UTC | #1
On Sun, Jul 23, 2023 at 04:24:17PM +0200, Krzysztof Kozlowski wrote:
> Add full description of USB-MUIC (MAX77693 MUIC) and MUIC-MHL
> connections, along with proper USB connector and OTG mode for DWC2 USB
> controller.
> 
> This fixes dtc W=1 warnings:
> 
>   Warning (graph_child_address): /i2c-mhl/hdmi-bridge@39/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
> 
> Cc: Marek Szyprowski <m.szyprowski@samsung.com>
> Cc: replicant@osuosl.org
> Cc: phone-devel@vger.kernel.org
> Cc: ~postmarketos/upstreaming@lists.sr.ht
> Cc: Martin Jücker <martin.juecker@gmail.com>
> Cc: Henrik Grimler <henrik@grimler.se>
> Cc: Artur Weber <aweber.kernel@gmail.com>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Tested-by: Henrik Grimler <henrik@grimler.se>

* Peripheral mode (still) works
* MHL somewhat works
* OTG (still) does not work

Further details for those interested:

MHL works reliably if cable is attached before boot, but if cable is
attached on already running device it sometimes work after detaching
and attaching cable a few times.  On cable attach, when it does not
work, we get:

  [  252.831734] max77693-muic max77693-muic: external connector is detached(chg_type:0x0, prev_chg_type:0x0)
  [  253.733916] max77693-muic max77693-muic: external connector is attached(chg_type:0x1, prev_chg_type:0x1)
  [  253.735232] max77693-muic max77693-muic: CONTROL1 : 0x09, CONTROL2 : 0x04, state : attached
  [  254.691877] i2c i2c-15: sendbytes: NAK bailout.
  [  254.692150] sii9234 15-0039: writebm:  TPI[0x3d] <- 0x3e
  [  255.984336] sii9234 15-0039: RGND is not 1k
  [  256.068970] sii9234 15-0039: RSEN_HIGH without RGND_1K
  [  256.104457] sii9234 15-0039: discovery failed, no power for MHL?
  [  256.118272] i2c i2c-15: sendbytes: NAK bailout.
  [  256.118539] sii9234 15-0039: writebm:  TPI[0x3d] <- 0x3e
  [  256.375966] sii9234 15-0039: RSEN_HIGH without RGND_1K
  [  256.411561] sii9234 15-0039: discovery failed, no power for MHL?

while when it works:

  [  175.348307] max77693-muic max77693-muic: external connector is detached(chg_type:0x1, prev_chg_type:0x0)
  [  175.349576] max77693-muic max77693-muic: CONTROL1 : 0x00, CONTROL2 : 0x01, state : detached
  [  179.304373] dwc2 12480000.usb: new device is full-speed
  [  179.305920] max77693-muic max77693-muic: external connector is detached(chg_type:0x0, prev_chg_type:0x0)
  [  180.205735] max77693-muic max77693-muic: external connector is attached(chg_type:0x1, prev_chg_type:0x1)
  [  180.207211] max77693-muic max77693-muic: CONTROL1 : 0x09, CONTROL2 : 0x04, state : attached
  [  180.309727] i2c i2c-15: sendbytes: NAK bailout.
  [  180.309996] sii9234 15-0039: writebm:  TPI[0x3d] <- 0x3e

Not sure if issue here is in muic driver or sii9234 driver.

OTG still does not seem to work, the muic driver detects (only) a
detach when OTG cable is attached:

  max77693-muic max77693-muic: external connector is detached(chg_type:0x0, prev_chg_type:0x0)

Same happened when otg cable was attached before these hsotg changes
as well. I suppose issue here is with max77693-muic driver.

Best regards,
Henrik Grimler

> ---
> 
> Changes in v2:
> 1. Put connector node in the muic node (Henrik)
> 
> Not tested on hardware. Please kindly check if peripheral mode is not
> broken. Or maybe OTG started to work?
> ---
>  .../boot/dts/samsung/exynos4412-midas.dtsi    | 50 ++++++++++++++++++-
>  1 file changed, 49 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi b/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
> index 57836d5554d0..7daf25865551 100644
> --- a/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
> +++ b/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
> @@ -182,6 +182,38 @@ pmic@66 {
>  			pinctrl-0 = <&max77693_irq>;
>  			reg = <0x66>;
>  
> +			muic {
> +				compatible = "maxim,max77693-muic";
> +
> +				connector {
> +					compatible = "samsung,usb-connector-11pin",
> +						     "usb-b-connector";
> +					label = "micro-USB";
> +					type = "micro";
> +
> +					ports {
> +						#address-cells = <1>;
> +						#size-cells = <0>;
> +
> +						port@0 {
> +							reg = <0>;
> +
> +							muic_to_usb: endpoint {
> +								remote-endpoint = <&usb_to_muic>;
> +							};
> +						};
> +
> +						port@3 {
> +							reg = <3>;
> +
> +							muic_to_mhl: endpoint {
> +								remote-endpoint = <&mhl_to_muic>;
> +							};
> +						};
> +					};
> +				};
> +			};
> +
>  			regulators {
>  				esafeout1_reg: ESAFEOUT1 {
>  					regulator-name = "ESAFEOUT1";
> @@ -287,6 +319,14 @@ mhl_to_hdmi: endpoint {
>  						remote-endpoint = <&hdmi_to_mhl>;
>  					};
>  				};
> +
> +				port@1 {
> +					reg = <1>;
> +
> +					mhl_to_muic: endpoint {
> +						remote-endpoint = <&muic_to_mhl>;
> +					};
> +				};
>  			};
>  		};
>  	};
> @@ -545,8 +585,16 @@ hdmi_to_mhl: endpoint {
>  &hsotg {
>  	vusb_d-supply = <&ldo15_reg>;
>  	vusb_a-supply = <&ldo12_reg>;
> -	dr_mode = "peripheral";
> +	dr_mode = "otg";
> +	role-switch-default-mode = "peripheral";
> +	usb-role-switch;
>  	status = "okay";
> +
> +	port {
> +		usb_to_muic: endpoint {
> +			remote-endpoint = <&muic_to_usb>;
> +		};
> +	};
>  };
>  
>  &i2c_0 {
> -- 
> 2.34.1
>
Krzysztof Kozlowski July 25, 2023, 8:08 p.m. UTC | #2
On 25/07/2023 21:15, Henrik Grimler wrote:
> On Sun, Jul 23, 2023 at 04:24:17PM +0200, Krzysztof Kozlowski wrote:
>> Add full description of USB-MUIC (MAX77693 MUIC) and MUIC-MHL
>> connections, along with proper USB connector and OTG mode for DWC2 USB
>> controller.
>>
>> This fixes dtc W=1 warnings:
>>
>>   Warning (graph_child_address): /i2c-mhl/hdmi-bridge@39/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
>>
>> Cc: Marek Szyprowski <m.szyprowski@samsung.com>
>> Cc: replicant@osuosl.org
>> Cc: phone-devel@vger.kernel.org
>> Cc: ~postmarketos/upstreaming@lists.sr.ht
>> Cc: Martin Jücker <martin.juecker@gmail.com>
>> Cc: Henrik Grimler <henrik@grimler.se>
>> Cc: Artur Weber <aweber.kernel@gmail.com>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> Tested-by: Henrik Grimler <henrik@grimler.se>
> 
> * Peripheral mode (still) works
> * MHL somewhat works
> * OTG (still) does not work
> 
> Further details for those interested:
> 
> MHL works reliably if cable is attached before boot, but if cable is
> attached on already running device it sometimes work after detaching
> and attaching cable a few times.  On cable attach, when it does not
> work, we get:
> 
>   [  252.831734] max77693-muic max77693-muic: external connector is detached(chg_type:0x0, prev_chg_type:0x0)
>   [  253.733916] max77693-muic max77693-muic: external connector is attached(chg_type:0x1, prev_chg_type:0x1)
>   [  253.735232] max77693-muic max77693-muic: CONTROL1 : 0x09, CONTROL2 : 0x04, state : attached
>   [  254.691877] i2c i2c-15: sendbytes: NAK bailout.
>   [  254.692150] sii9234 15-0039: writebm:  TPI[0x3d] <- 0x3e
>   [  255.984336] sii9234 15-0039: RGND is not 1k
>   [  256.068970] sii9234 15-0039: RSEN_HIGH without RGND_1K
>   [  256.104457] sii9234 15-0039: discovery failed, no power for MHL?
>   [  256.118272] i2c i2c-15: sendbytes: NAK bailout.
>   [  256.118539] sii9234 15-0039: writebm:  TPI[0x3d] <- 0x3e
>   [  256.375966] sii9234 15-0039: RSEN_HIGH without RGND_1K
>   [  256.411561] sii9234 15-0039: discovery failed, no power for MHL?
> 
> while when it works:
> 
>   [  175.348307] max77693-muic max77693-muic: external connector is detached(chg_type:0x1, prev_chg_type:0x0)
>   [  175.349576] max77693-muic max77693-muic: CONTROL1 : 0x00, CONTROL2 : 0x01, state : detached
>   [  179.304373] dwc2 12480000.usb: new device is full-speed
>   [  179.305920] max77693-muic max77693-muic: external connector is detached(chg_type:0x0, prev_chg_type:0x0)
>   [  180.205735] max77693-muic max77693-muic: external connector is attached(chg_type:0x1, prev_chg_type:0x1)
>   [  180.207211] max77693-muic max77693-muic: CONTROL1 : 0x09, CONTROL2 : 0x04, state : attached
>   [  180.309727] i2c i2c-15: sendbytes: NAK bailout.
>   [  180.309996] sii9234 15-0039: writebm:  TPI[0x3d] <- 0x3e
> 
> Not sure if issue here is in muic driver or sii9234 driver.
> 
> OTG still does not seem to work, the muic driver detects (only) a
> detach when OTG cable is attached:
> 
>   max77693-muic max77693-muic: external connector is detached(chg_type:0x0, prev_chg_type:0x0)
> 
> Same happened when otg cable was attached before these hsotg changes
> as well. I suppose issue here is with max77693-muic driver.
> 

Thanks for testing. I miss here one important thing - did anything
regressed? Is MHL behaving not worse than before? OTG, as non-working,
matters less in such case.

Best regards,
Krzysztof
Henrik Grimler July 25, 2023, 9:22 p.m. UTC | #3
Hi Krzysztof,

On Tue, Jul 25, 2023 at 10:08:00PM +0200, Krzysztof Kozlowski wrote:
> On 25/07/2023 21:15, Henrik Grimler wrote:
> > On Sun, Jul 23, 2023 at 04:24:17PM +0200, Krzysztof Kozlowski wrote:
> >> Add full description of USB-MUIC (MAX77693 MUIC) and MUIC-MHL
> >> connections, along with proper USB connector and OTG mode for DWC2 USB
> >> controller.
> >>
> >> This fixes dtc W=1 warnings:
> >>
> >>   Warning (graph_child_address): /i2c-mhl/hdmi-bridge@39/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
> >>
> >> Cc: Marek Szyprowski <m.szyprowski@samsung.com>
> >> Cc: replicant@osuosl.org
> >> Cc: phone-devel@vger.kernel.org
> >> Cc: ~postmarketos/upstreaming@lists.sr.ht
> >> Cc: Martin Jücker <martin.juecker@gmail.com>
> >> Cc: Henrik Grimler <henrik@grimler.se>
> >> Cc: Artur Weber <aweber.kernel@gmail.com>
> >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > 
> > Tested-by: Henrik Grimler <henrik@grimler.se>
> > 
> > * Peripheral mode (still) works
> > * MHL somewhat works
> > * OTG (still) does not work
> > 
> > Further details for those interested:
> > 
> > MHL works reliably if cable is attached before boot, but if cable is
> > attached on already running device it sometimes work after detaching
> > and attaching cable a few times.  On cable attach, when it does not
> > work, we get:
> > 
> >   [  252.831734] max77693-muic max77693-muic: external connector is detached(chg_type:0x0, prev_chg_type:0x0)
> >   [  253.733916] max77693-muic max77693-muic: external connector is attached(chg_type:0x1, prev_chg_type:0x1)
> >   [  253.735232] max77693-muic max77693-muic: CONTROL1 : 0x09, CONTROL2 : 0x04, state : attached
> >   [  254.691877] i2c i2c-15: sendbytes: NAK bailout.
> >   [  254.692150] sii9234 15-0039: writebm:  TPI[0x3d] <- 0x3e
> >   [  255.984336] sii9234 15-0039: RGND is not 1k
> >   [  256.068970] sii9234 15-0039: RSEN_HIGH without RGND_1K
> >   [  256.104457] sii9234 15-0039: discovery failed, no power for MHL?
> >   [  256.118272] i2c i2c-15: sendbytes: NAK bailout.
> >   [  256.118539] sii9234 15-0039: writebm:  TPI[0x3d] <- 0x3e
> >   [  256.375966] sii9234 15-0039: RSEN_HIGH without RGND_1K
> >   [  256.411561] sii9234 15-0039: discovery failed, no power for MHL?
> > 
> > while when it works:
> > 
> >   [  175.348307] max77693-muic max77693-muic: external connector is detached(chg_type:0x1, prev_chg_type:0x0)
> >   [  175.349576] max77693-muic max77693-muic: CONTROL1 : 0x00, CONTROL2 : 0x01, state : detached
> >   [  179.304373] dwc2 12480000.usb: new device is full-speed
> >   [  179.305920] max77693-muic max77693-muic: external connector is detached(chg_type:0x0, prev_chg_type:0x0)
> >   [  180.205735] max77693-muic max77693-muic: external connector is attached(chg_type:0x1, prev_chg_type:0x1)
> >   [  180.207211] max77693-muic max77693-muic: CONTROL1 : 0x09, CONTROL2 : 0x04, state : attached
> >   [  180.309727] i2c i2c-15: sendbytes: NAK bailout.
> >   [  180.309996] sii9234 15-0039: writebm:  TPI[0x3d] <- 0x3e
> > 
> > Not sure if issue here is in muic driver or sii9234 driver.
> > 
> > OTG still does not seem to work, the muic driver detects (only) a
> > detach when OTG cable is attached:
> > 
> >   max77693-muic max77693-muic: external connector is detached(chg_type:0x0, prev_chg_type:0x0)
> > 
> > Same happened when otg cable was attached before these hsotg changes
> > as well. I suppose issue here is with max77693-muic driver.
> > 
> 
> Thanks for testing. I miss here one important thing - did anything
> regressed? Is MHL behaving not worse than before? OTG, as non-working,
> matters less in such case.

No regressions as far as I can tell, only improvements.  We want the
muic node and mhl_to_muic/muic_to_mhl ports so that muic can notify
the mhl chip of cable attachment/detachment (with requires an
additional patch to the sii9234 driver that I will send soon [1]).
The alternative, having the mhl chip always on, has caused issues with
some GUIs [2].

> Best regards,
> Krzysztof

[1] https://gitlab.com/exynos4-mainline/linux/-/commit/742d05797799
[2] https://gitlab.gnome.org/World/Phosh/phosh/-/issues/828#note_1542189

Best regards,
Henrik Grimler
Krzysztof Kozlowski July 26, 2023, 7:23 a.m. UTC | #4
On 25/07/2023 23:22, Henrik Grimler wrote:
>>> MHL works reliably if cable is attached before boot, but if cable is
>>> attached on already running device it sometimes work after detaching
>>> and attaching cable a few times.  On cable attach, when it does not
>>> work, we get:
>>>
>>>   [  252.831734] max77693-muic max77693-muic: external connector is detached(chg_type:0x0, prev_chg_type:0x0)
>>>   [  253.733916] max77693-muic max77693-muic: external connector is attached(chg_type:0x1, prev_chg_type:0x1)
>>>   [  253.735232] max77693-muic max77693-muic: CONTROL1 : 0x09, CONTROL2 : 0x04, state : attached
>>>   [  254.691877] i2c i2c-15: sendbytes: NAK bailout.
>>>   [  254.692150] sii9234 15-0039: writebm:  TPI[0x3d] <- 0x3e
>>>   [  255.984336] sii9234 15-0039: RGND is not 1k
>>>   [  256.068970] sii9234 15-0039: RSEN_HIGH without RGND_1K
>>>   [  256.104457] sii9234 15-0039: discovery failed, no power for MHL?
>>>   [  256.118272] i2c i2c-15: sendbytes: NAK bailout.
>>>   [  256.118539] sii9234 15-0039: writebm:  TPI[0x3d] <- 0x3e
>>>   [  256.375966] sii9234 15-0039: RSEN_HIGH without RGND_1K
>>>   [  256.411561] sii9234 15-0039: discovery failed, no power for MHL?
>>>
>>> while when it works:
>>>
>>>   [  175.348307] max77693-muic max77693-muic: external connector is detached(chg_type:0x1, prev_chg_type:0x0)
>>>   [  175.349576] max77693-muic max77693-muic: CONTROL1 : 0x00, CONTROL2 : 0x01, state : detached
>>>   [  179.304373] dwc2 12480000.usb: new device is full-speed
>>>   [  179.305920] max77693-muic max77693-muic: external connector is detached(chg_type:0x0, prev_chg_type:0x0)
>>>   [  180.205735] max77693-muic max77693-muic: external connector is attached(chg_type:0x1, prev_chg_type:0x1)
>>>   [  180.207211] max77693-muic max77693-muic: CONTROL1 : 0x09, CONTROL2 : 0x04, state : attached
>>>   [  180.309727] i2c i2c-15: sendbytes: NAK bailout.
>>>   [  180.309996] sii9234 15-0039: writebm:  TPI[0x3d] <- 0x3e
>>>
>>> Not sure if issue here is in muic driver or sii9234 driver.
>>>
>>> OTG still does not seem to work, the muic driver detects (only) a
>>> detach when OTG cable is attached:
>>>
>>>   max77693-muic max77693-muic: external connector is detached(chg_type:0x0, prev_chg_type:0x0)
>>>
>>> Same happened when otg cable was attached before these hsotg changes
>>> as well. I suppose issue here is with max77693-muic driver.
>>>
>>
>> Thanks for testing. I miss here one important thing - did anything
>> regressed? Is MHL behaving not worse than before? OTG, as non-working,
>> matters less in such case.
> 
> No regressions as far as I can tell, only improvements.  We want the
> muic node and mhl_to_muic/muic_to_mhl ports so that muic can notify
> the mhl chip of cable attachment/detachment (with requires an
> additional patch to the sii9234 driver that I will send soon [1]).
> The alternative, having the mhl chip always on, has caused issues with
> some GUIs [2].

Awesome, thank you!

Best regards,
Krzysztof
Krzysztof Kozlowski July 26, 2023, 8:53 a.m. UTC | #5
On Sun, 23 Jul 2023 16:24:17 +0200, Krzysztof Kozlowski wrote:
> Add full description of USB-MUIC (MAX77693 MUIC) and MUIC-MHL
> connections, along with proper USB connector and OTG mode for DWC2 USB
> controller.
> 
> This fixes dtc W=1 warnings:
> 
>   Warning (graph_child_address): /i2c-mhl/hdmi-bridge@39/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
> 
> [...]

Applied, thanks!

[1/1] ARM: dts: samsung: exynos4412-midas: add USB connector and USB OTG
      https://git.kernel.org/krzk/linux/c/57f706bf73079379a9e9f5490c94c2473077bb2e

Best regards,
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi b/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
index 57836d5554d0..7daf25865551 100644
--- a/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
@@ -182,6 +182,38 @@  pmic@66 {
 			pinctrl-0 = <&max77693_irq>;
 			reg = <0x66>;
 
+			muic {
+				compatible = "maxim,max77693-muic";
+
+				connector {
+					compatible = "samsung,usb-connector-11pin",
+						     "usb-b-connector";
+					label = "micro-USB";
+					type = "micro";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							muic_to_usb: endpoint {
+								remote-endpoint = <&usb_to_muic>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							muic_to_mhl: endpoint {
+								remote-endpoint = <&mhl_to_muic>;
+							};
+						};
+					};
+				};
+			};
+
 			regulators {
 				esafeout1_reg: ESAFEOUT1 {
 					regulator-name = "ESAFEOUT1";
@@ -287,6 +319,14 @@  mhl_to_hdmi: endpoint {
 						remote-endpoint = <&hdmi_to_mhl>;
 					};
 				};
+
+				port@1 {
+					reg = <1>;
+
+					mhl_to_muic: endpoint {
+						remote-endpoint = <&muic_to_mhl>;
+					};
+				};
 			};
 		};
 	};
@@ -545,8 +585,16 @@  hdmi_to_mhl: endpoint {
 &hsotg {
 	vusb_d-supply = <&ldo15_reg>;
 	vusb_a-supply = <&ldo12_reg>;
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+	role-switch-default-mode = "peripheral";
+	usb-role-switch;
 	status = "okay";
+
+	port {
+		usb_to_muic: endpoint {
+			remote-endpoint = <&muic_to_usb>;
+		};
+	};
 };
 
 &i2c_0 {