From patchwork Fri Dec 1 16:09:18 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Peter Griffin X-Patchwork-Id: 13476118 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="egV9xTuF" Received: from mail-wr1-x429.google.com (mail-wr1-x429.google.com [IPv6:2a00:1450:4864:20::429]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E084010DF for ; Fri, 1 Dec 2023 08:11:10 -0800 (PST) Received: by mail-wr1-x429.google.com with SMTP id ffacd0b85a97d-33334480eb4so361260f8f.0 for ; Fri, 01 Dec 2023 08:11:10 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1701447069; x=1702051869; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=/+zkqAHvSmq2dATTTVEBFiBdnwvGYS4QXRxMl+kSH1Q=; b=egV9xTuFOABl13hdT5KeUUmj2esCzbojp5Rp5Q1juYDOVZbu0zRG5iMyuSTpcb63Fy msfCyCcNvBgRRDfOHFSwLKsF2ygybpW5MpoX9ZOqKcuWQnOsBFOFKwLGUvluaOdZWPdU H9XRMCcJjySBGRmOWbDU1Eh3BgJY1QiHkc9sdR8aqQt8R4fUSUcboMNVueNB54QsZ2ka CFJCk6KfJ8t86TemJpy/pRuXasrQPkWYxBwsFfWGLeU5XHSFDTTHSuD1RQq5SpmCVa2I Kjw5v0q04/9xL+X4rNpweHRkvaahWJLU//KxdAqACSv76RDLVl8nuC0UJBaxX9BIINFA FODw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1701447069; x=1702051869; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=/+zkqAHvSmq2dATTTVEBFiBdnwvGYS4QXRxMl+kSH1Q=; b=hpEUXQbsIGdrFsuq1JAqhUMUafkya/dUJzyEQFnU9S/Hxv1DK/JyCRFNTrDWEmfyMe ZtfAbMk4QKMMmwe/f5yHbE7x6ek4kSN00Wojt4YzV6OoVTG8A2ovVt0kEz6ANq0ftFdS o6G15j6grNLtJcX9WGMchSlTTuPntoHtKzPGFUzXh9XWQplHw8ymZbpDmie3oL0AodJd peetHxMD+Cj+9qaRtaOrdiYpsuZJm8haytcgt2Ikofl2kAMKiZ1lnVriw9jPZHSsLpeG 5UPkTRQRfYz8wjSO3t02izav2XKV+ez042XLM6KHihoO7gLmbq/X9gJCHuw1Js8oV1sm g/Pw== X-Gm-Message-State: AOJu0YzAXgPAufV3+/3UbXGQkFvbarMGHyYu8VzAgFP+VUuVO0/3JzKv U8RIWFh0MsTvTi3A3ViLj4SliQ== X-Google-Smtp-Source: AGHT+IH/N+WGSDPm8hflAvACCDfWDzC4mFmA8mX9+tdGww+NYSDT6SPblY2oJCjprKivmBdu45BQDg== X-Received: by 2002:adf:a4cf:0:b0:333:2fd2:2ee0 with SMTP id h15-20020adfa4cf000000b003332fd22ee0mr1201143wrb.89.1701447069384; Fri, 01 Dec 2023 08:11:09 -0800 (PST) Received: from gpeter-l.lan (host-92-29-24-243.as13285.net. [92.29.24.243]) by smtp.gmail.com with ESMTPSA id cg16-20020a5d5cd0000000b003332656cd73sm3907386wrb.105.2023.12.01.08.11.07 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 01 Dec 2023 08:11:08 -0800 (PST) From: Peter Griffin To: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, mturquette@baylibre.com, conor+dt@kernel.org, sboyd@kernel.org, tomasz.figa@gmail.com, s.nawrocki@samsung.com, linus.walleij@linaro.org, wim@linux-watchdog.org, linux@roeck-us.net, catalin.marinas@arm.com, will@kernel.org, arnd@arndb.de, olof@lixom.net, gregkh@linuxfoundation.org, jirislaby@kernel.org, cw00.choi@samsung.com, alim.akhtar@samsung.com Cc: peter.griffin@linaro.org, tudor.ambarus@linaro.org, andre.draszik@linaro.org, semen.protsenko@linaro.org, saravanak@google.com, willmcvicker@google.com, soc@kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org, linux-watchdog@vger.kernel.org, kernel-team@android.com, linux-serial@vger.kernel.org Subject: [PATCH v5 13/20] pinctrl: samsung: Add filter selection support for alive banks Date: Fri, 1 Dec 2023 16:09:18 +0000 Message-ID: <20231201160925.3136868-14-peter.griffin@linaro.org> X-Mailer: git-send-email 2.43.0.rc2.451.g8631bc7472-goog In-Reply-To: <20231201160925.3136868-1-peter.griffin@linaro.org> References: <20231201160925.3136868-1-peter.griffin@linaro.org> Precedence: bulk X-Mailing-List: linux-samsung-soc@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Newer Exynos SoCs have a filter selection register on alive bank pins. This allows the selection of a digital or delay filter for each pin. If the filter selection register is not available then the default filter (digital) is applied. On suspend we apply the analog filter to all pins in the bank (as the digital filter relies on a clock). On resume the digital filter is reapplied to all pins in the bank. The digital filter is working via clock and has an adjustable filter delay register bitfield, whereas the analog filter uses a fixed delay. The filter determines to what extent signal fluctuations received through the pad are considered glitches. The code path can be exercised using echo mem > /sys/power/state And then wake the device using a eint gpio Signed-off-by: Peter Griffin Tested-by: Will McVicker --- drivers/pinctrl/samsung/pinctrl-exynos.c | 89 ++++++++++++++++++++++- drivers/pinctrl/samsung/pinctrl-exynos.h | 7 ++ drivers/pinctrl/samsung/pinctrl-samsung.c | 2 + drivers/pinctrl/samsung/pinctrl-samsung.h | 22 ++++++ 4 files changed, 119 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c index 6b58ec84e34b..56fc11a1fe2f 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos.c +++ b/drivers/pinctrl/samsung/pinctrl-exynos.c @@ -269,6 +269,71 @@ struct exynos_eint_gpio_save { u32 eint_mask; }; +/* + * Set the desired filter (digital or analog delay) to every pin in + * the bank. Note the filter selection bitfield is only found on alive + * banks. The filter determines to what extent signal fluctuations + * received through the pad are considered glitches. + */ +static void exynos_eint_flt_config(struct samsung_pinctrl_drv_data *d, + struct samsung_pin_bank *bank, int filter) +{ + unsigned int flt_reg, flt_con = 0; + unsigned int val, shift; + int i; + int loop_cnt; + + /* + * The FLTCON register has the following layout + * + * BitfieldName[PinNum][Bit:Bit] + * FLT_EN[3][31] FLT_SEL[3][30] FLT_WIDTH[3][29:24] + * FLT_EN[2][23] FLT_SEL[2][22] FLT_WIDTH[2][21:16] + * FLT_EN[1][15] FLT_SEL[1][14] FLT_WIDTH[1][13:8] + * FLT_EN[0][7] FLT_SEL[0][6] FLT_WIDTH[0][5:0] + * + * FLT_EN 0x0 = Disable, 0x1=Enable + * FLT_SEL 0x0 = Delay filter, 0x1 Digital filter + * FLT_WIDTH Filtering width. Valid when FLT_SEL is 0x1 + */ + + flt_con |= EXYNOS9_FLTCON_EN; + + if (filter) + flt_con |= EXYNOS9_FLTCON_DIGITAL; + + flt_reg = EXYNOS_GPIO_EFLTCON_OFFSET + bank->fltcon_offset; + + /* + * If nr_pins > 4, we should set FLTCON0 register fully. + * (pin0 ~ 3). So loop 4 times in case of FLTCON0. + */ + if (bank->nr_pins > EXYNOS9_FLTCON_NR_PIN) + loop_cnt = EXYNOS9_FLTCON_NR_PIN; + else + loop_cnt = bank->nr_pins; + + val = readl(d->virt_base + flt_reg); + for (i = 0; i < loop_cnt; i++) { + shift = i * EXYNOS9_FLTCON_LEN; + val &= ~(EXYNOS9_FLTCON_MASK << shift); + val |= (flt_con << shift); + } + writel(val, d->virt_base + flt_reg); + + /* Loop for FLTCON1 pin 4 ~ 7 */ + if (bank->nr_pins > EXYNOS9_FLTCON_NR_PIN) { + loop_cnt = (bank->nr_pins - EXYNOS9_FLTCON_NR_PIN); + val = readl(d->virt_base + flt_reg + 0x4); + for (i = 0; i < loop_cnt; i++) { + shift = i * EXYNOS9_FLTCON_LEN; + val &= ~(EXYNOS9_FLTCON_MASK << shift); + val |= (flt_con << shift); + } + writel(val, d->virt_base + flt_reg + 0x4); + } +} + /* * exynos_eint_gpio_init() - setup handling of external gpio interrupts. * @d: driver data of samsung pinctrl driver. @@ -321,6 +386,10 @@ __init int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) goto err_domains; } + /* Set Delay Analog Filter */ + if (bank->fltcon_type != FLT_DEFAULT) + exynos_eint_flt_config(d, bank, + EXYNOS9_FLTCON_DELAY); } return 0; @@ -555,6 +624,11 @@ __init int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d) if (bank->eint_type != EINT_TYPE_WKUP) continue; + /* Set Digital Filter */ + if (bank->fltcon_type != FLT_DEFAULT) + exynos_eint_flt_config(d, bank, + EXYNOS9_FLTCON_DIGITAL); + bank->irq_chip = devm_kmemdup(dev, irq_chip, sizeof(*irq_chip), GFP_KERNEL); if (!bank->irq_chip) { @@ -658,6 +732,7 @@ static void exynos_pinctrl_suspend_bank( void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata) { struct samsung_pin_bank *bank = drvdata->pin_banks; + struct samsung_pinctrl_drv_data *d = bank->drvdata; struct exynos_irq_chip *irq_chip = NULL; int i; @@ -665,6 +740,10 @@ void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata) if (bank->eint_type == EINT_TYPE_GPIO) exynos_pinctrl_suspend_bank(drvdata, bank); else if (bank->eint_type == EINT_TYPE_WKUP) { + /* Setting Delay (Analog) Filter */ + if (bank->fltcon_type != FLT_DEFAULT) + exynos_eint_flt_config(d, bank, + EXYNOS9_FLTCON_DELAY); if (!irq_chip) { irq_chip = bank->irq_chip; irq_chip->set_eint_wakeup_mask(drvdata, @@ -707,11 +786,19 @@ static void exynos_pinctrl_resume_bank( void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata) { struct samsung_pin_bank *bank = drvdata->pin_banks; + struct samsung_pinctrl_drv_data *d = bank->drvdata; int i; for (i = 0; i < drvdata->nr_banks; ++i, ++bank) - if (bank->eint_type == EINT_TYPE_GPIO) + if (bank->eint_type == EINT_TYPE_GPIO) { exynos_pinctrl_resume_bank(drvdata, bank); + } else if (bank->eint_type == EINT_TYPE_WKUP || + bank->eint_type == EINT_TYPE_WKUP_MUX) { + /* Set Digital Filter */ + if (bank->fltcon_type != FLT_DEFAULT) + exynos_eint_flt_config(d, bank, + EXYNOS9_FLTCON_DIGITAL); + } } static void exynos_retention_enable(struct samsung_pinctrl_drv_data *drvdata) diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h index 3ac52c2cf998..e2799ff1b5e9 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos.h +++ b/drivers/pinctrl/samsung/pinctrl-exynos.h @@ -50,6 +50,13 @@ #define EXYNOS_EINT_MAX_PER_BANK 8 #define EXYNOS_EINT_NR_WKUP_EINT +/* EINT filter configuration */ +#define EXYNOS9_FLTCON_EN BIT(7) +#define EXYNOS9_FLTCON_DIGITAL BIT(6) +#define EXYNOS9_FLTCON_DELAY (0 << 6) +#define EXYNOS9_FLTCON_MASK 0xff +#define EXYNOS9_FLTCON_LEN 8 +#define EXYNOS9_FLTCON_NR_PIN 4 #define EXYNOS_PIN_BANK_EINTN(pins, reg, id) \ { \ diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c index 79babbb39ced..50c360b4753a 100644 --- a/drivers/pinctrl/samsung/pinctrl-samsung.c +++ b/drivers/pinctrl/samsung/pinctrl-samsung.c @@ -1105,6 +1105,8 @@ samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d, bank->eint_func = bdata->eint_func; bank->eint_type = bdata->eint_type; bank->eint_mask = bdata->eint_mask; + bank->fltcon_type = bdata->fltcon_type; + bank->fltcon_offset = bdata->fltcon_offset; bank->eint_offset = bdata->eint_offset; bank->name = bdata->name; diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h index 9b3db50adef3..5fab3885a7d7 100644 --- a/drivers/pinctrl/samsung/pinctrl-samsung.h +++ b/drivers/pinctrl/samsung/pinctrl-samsung.h @@ -82,6 +82,20 @@ enum eint_type { EINT_TYPE_WKUP_MUX, }; +/** + * enum fltcon_type - filter selection + * @FLT_DEFAULT: filter not selectable, default digital filter + * @FLT_SELECT: filter selectable (digital or delay) + * + * Some banks on newer Exynos based SoCs have a selectable filter on alive + * banks of 'analog/delay' or 'digital'. If the filter selection register is + * not available then the default filter is used (digital). + */ +enum fltcon_type { + FLT_DEFAULT, + FLT_SELECTABLE, +}; + /* maximum length of a pin in pin descriptor (example: "gpa0-0") */ #define PIN_NAME_LENGTH 10 @@ -122,6 +136,8 @@ struct samsung_pin_bank_type { * @eint_type: type of the external interrupt supported by the bank. * @eint_mask: bit mask of pins which support EINT function. * @eint_offset: SoC-specific EINT register or interrupt offset of bank. + * @fltcon_type: whether the filter (delay/digital) is selectable + * @fltcon_offset: SoC-specific EINT filter control register offset of bank. * @name: name to be prefixed for each pin in this pin bank. */ struct samsung_pin_bank_data { @@ -133,6 +149,8 @@ struct samsung_pin_bank_data { enum eint_type eint_type; u32 eint_mask; u32 eint_offset; + enum fltcon_type fltcon_type; + u32 fltcon_offset; const char *name; }; @@ -147,6 +165,8 @@ struct samsung_pin_bank_data { * @eint_type: type of the external interrupt supported by the bank. * @eint_mask: bit mask of pins which support EINT function. * @eint_offset: SoC-specific EINT register or interrupt offset of bank. + * @fltcon_type: whether the filter (delay/digital) is selectable + * @fltcon_offset: SoC-specific EINT filter control register offset of bank. * @name: name to be prefixed for each pin in this pin bank. * @id: id of the bank, propagated to the pin range. * @pin_base: starting pin number of the bank. @@ -170,6 +190,8 @@ struct samsung_pin_bank { enum eint_type eint_type; u32 eint_mask; u32 eint_offset; + enum fltcon_type fltcon_type; + u32 fltcon_offset; const char *name; u32 id;