diff mbox series

[v2,20/28] spi: s3c64xx: add support for inferring fifosize from the compatible

Message ID 20240125145007.748295-21-tudor.ambarus@linaro.org (mailing list archive)
State New
Headers show
Series spi: s3c64xx: winter cleanup and gs101 support | expand

Commit Message

Tudor Ambarus Jan. 25, 2024, 2:49 p.m. UTC
The IP supports FIFO sizes from 8 to 256 bytes. The SoC that uses the IP
dictates the FIFO depth configuration. Add support for inferring the
FIFO size from the compatible for those SoCs that use the same FIFO
depth across all the instances of the SPI IP. Parsing of a device tree
property to determine the FIFO size for the SoCs that use different FIFO
sizes for different instances of the SPI IP will be added in a further
patch.

The scope of this patch is to break the dependency chain between the
device tree SPI alias, the fifo_lvl_mask value and the FIFO size from
the driver.

Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
---
 drivers/spi/spi-s3c64xx.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index fc5fffc019e0..5a93ed4125b0 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -132,6 +132,7 @@  struct s3c64xx_spi_dma_data {
  * @rx_lvl_offset: Bit offset of RX_FIFO_LVL bits in SPI_STATUS regiter.
  * @tx_st_done: Bit offset of TX_DONE bit in SPI_STATUS regiter.
  * @clk_div: Internal clock divider
+ * @fifosize: size of the FIFO
  * @quirks: Bitmask of known quirks
  * @high_speed: True, if the controller supports HIGH_SPEED_EN bit.
  * @clk_from_cmu: True, if the controller does not include a clock mux and
@@ -150,6 +151,7 @@  struct s3c64xx_spi_port_config {
 	int	tx_st_done;
 	int	quirks;
 	int	clk_div;
+	unsigned int fifosize;
 	bool	high_speed;
 	bool	clk_from_cmu;
 	bool	clk_ioclk;
@@ -176,6 +178,7 @@  struct s3c64xx_spi_port_config {
  * @tx_dma: Local transmit DMA data (e.g. chan and direction)
  * @port_conf: Local SPI port configuration data
  * @port_id: Port identification number
+ * @fifosize: size of the FIFO
  */
 struct s3c64xx_spi_driver_data {
 	void __iomem                    *regs;
@@ -195,6 +198,7 @@  struct s3c64xx_spi_driver_data {
 	struct s3c64xx_spi_dma_data	tx_dma;
 	const struct s3c64xx_spi_port_config	*port_conf;
 	unsigned int			port_id;
+	unsigned int			fifosize;
 };
 
 static void s3c64xx_flush_fifo(struct s3c64xx_spi_driver_data *sdd)
@@ -404,7 +408,7 @@  static bool s3c64xx_spi_can_dma(struct spi_controller *host,
 	struct s3c64xx_spi_driver_data *sdd = spi_controller_get_devdata(host);
 
 	if (sdd->rx_dma.ch && sdd->tx_dma.ch)
-		return xfer->len > FIFO_DEPTH(sdd);
+		return xfer->len > sdd->fifosize;
 
 	return false;
 }
@@ -702,7 +706,7 @@  static int s3c64xx_spi_transfer_one(struct spi_controller *host,
 				    struct spi_transfer *xfer)
 {
 	struct s3c64xx_spi_driver_data *sdd = spi_controller_get_devdata(host);
-	const unsigned int fifo_len = FIFO_DEPTH(sdd);
+	const unsigned int fifo_len = sdd->fifosize;
 	const void *tx_buf = NULL;
 	void *rx_buf = NULL;
 	int target_len = 0, origin_len = 0;
@@ -1154,6 +1158,11 @@  static int s3c64xx_spi_probe(struct platform_device *pdev)
 		sdd->port_id = pdev->id;
 	}
 
+	if (sdd->port_conf->fifosize)
+		sdd->fifosize = sdd->port_conf->fifosize;
+	else
+		sdd->fifosize = FIFO_DEPTH(sdd);
+
 	sdd->cur_bpw = 8;
 
 	sdd->tx_dma.direction = DMA_MEM_TO_DEV;
@@ -1243,7 +1252,7 @@  static int s3c64xx_spi_probe(struct platform_device *pdev)
 	dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d Targets attached\n",
 					sdd->port_id, host->num_chipselect);
 	dev_dbg(&pdev->dev, "\tIOmem=[%pR]\tFIFO %dbytes\n",
-					mem_res, FIFO_DEPTH(sdd));
+		mem_res, sdd->fifosize);
 
 	pm_runtime_mark_last_busy(&pdev->dev);
 	pm_runtime_put_autosuspend(&pdev->dev);