@@ -34,6 +34,8 @@
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
+
+#include "clk.h"
#include "clk-cpu.h"
#define E4210_SRC_CPU 0x0
@@ -64,6 +66,33 @@
#define DIV_MASK_ALL GENMASK(31, 0)
#define MUX_MASK GENMASK(2, 0)
+/**
+ * struct exynos_cpuclk - information about clock supplied to a CPU core
+ * @hw: handle between CCF and CPU clock
+ * @alt_parent: alternate parent clock to use when switching the speed
+ * of the primary parent clock
+ * @ctrl_base: base address of the clock controller
+ * @lock: cpu clock domain register access lock
+ * @cfg: cpu clock rate configuration data
+ * @num_cfgs: number of array elements in @cfg array
+ * @clk_nb: clock notifier registered for changes in clock speed of the
+ * primary parent clock
+ * @flags: configuration flags for the CPU clock
+ *
+ * This structure holds information required for programming the CPU clock for
+ * various clock speeds.
+ */
+struct exynos_cpuclk {
+ struct clk_hw hw;
+ const struct clk_hw *alt_parent;
+ void __iomem *ctrl_base;
+ spinlock_t *lock;
+ const struct exynos_cpuclk_cfg_data *cfg;
+ const unsigned long num_cfgs;
+ struct notifier_block clk_nb;
+ unsigned long flags;
+};
+
/*
* Helper function to wait until divider(s) have stabilized after the divider
* value has changed.
@@ -8,7 +8,12 @@
#ifndef __SAMSUNG_CLK_CPU_H
#define __SAMSUNG_CLK_CPU_H
-#include "clk.h"
+/* The CPU clock registers have DIV1 configuration register */
+#define CLK_CPU_HAS_DIV1 BIT(0)
+/* When ALT parent is active, debug clocks need safe divider values */
+#define CLK_CPU_NEEDS_DEBUG_ALT_DIV BIT(1)
+/* The CPU clock registers have Exynos5433-compatible layout */
+#define CLK_CPU_HAS_E5433_REGS_LAYOUT BIT(2)
/**
* struct exynos_cpuclk_cfg_data - config data to setup cpu clocks
@@ -28,38 +33,4 @@ struct exynos_cpuclk_cfg_data {
unsigned long div1;
};
-/**
- * struct exynos_cpuclk - information about clock supplied to a CPU core
- * @hw: handle between CCF and CPU clock
- * @alt_parent: alternate parent clock to use when switching the speed
- * of the primary parent clock
- * @ctrl_base: base address of the clock controller
- * @lock: cpu clock domain register access lock
- * @cfg: cpu clock rate configuration data
- * @num_cfgs: number of array elements in @cfg array
- * @clk_nb: clock notifier registered for changes in clock speed of the
- * primary parent clock
- * @flags: configuration flags for the CPU clock
- *
- * This structure holds information required for programming the CPU clock for
- * various clock speeds.
- */
-struct exynos_cpuclk {
- struct clk_hw hw;
- const struct clk_hw *alt_parent;
- void __iomem *ctrl_base;
- spinlock_t *lock;
- const struct exynos_cpuclk_cfg_data *cfg;
- const unsigned long num_cfgs;
- struct notifier_block clk_nb;
- unsigned long flags;
-
-/* The CPU clock registers have DIV1 configuration register */
-#define CLK_CPU_HAS_DIV1 (1 << 0)
-/* When ALT parent is active, debug clocks need safe divider values */
-#define CLK_CPU_NEEDS_DEBUG_ALT_DIV (1 << 1)
-/* The CPU clock registers have Exynos5433-compatible layout */
-#define CLK_CPU_HAS_E5433_REGS_LAYOUT (1 << 2)
-};
-
#endif /* __SAMSUNG_CLK_CPU_H */
Reduce the scope of struct exynos_cpuclk, as it's only used in clk-cpu.c internally. All drivers using clk-pll.h already include clk.h as well, so this change doesn't break anything. No functional change. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> --- Changes in v2: - none drivers/clk/samsung/clk-cpu.c | 29 +++++++++++++++++++++++++ drivers/clk/samsung/clk-cpu.h | 41 +++++------------------------------ 2 files changed, 35 insertions(+), 35 deletions(-)