diff mbox series

[v3,1/5] arm64: dts: exynos: gs101: reorder pinctrl-* properties

Message ID 20240326151301.348932-2-tudor.ambarus@linaro.org (mailing list archive)
State Accepted
Headers show
Series arm64: dts: exynos: gs101: define all PERIC USI nodes | expand

Commit Message

Tudor Ambarus March 26, 2024, 3:12 p.m. UTC 
From: André Draszik <andre.draszik@linaro.org>

The Preferred order for these is pinctrl-0 pinctrl-names.

Update the DTSI & DTS accordingly.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
---
 arch/arm64/boot/dts/exynos/google/gs101-oriole.dts | 4 ++--
 arch/arm64/boot/dts/exynos/google/gs101.dtsi       | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
index 6ccade2c8cb4..40de2b0aa086 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
+++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
@@ -29,8 +29,8 @@  chosen {
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		pinctrl-names = "default";
 		pinctrl-0 = <&key_voldown>, <&key_volup>, <&key_power>;
+		pinctrl-names = "default";
 
 		button-vol-down {
 			label = "KEY_VOLUMEDOWN";
@@ -103,8 +103,8 @@  key_power: key-power-pins {
 };
 
 &serial_0 {
-	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_bus>;
+	pinctrl-names = "default";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index 55e6bcb3689e..5868c96c771f 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -393,8 +393,8 @@  hsi2c_8: i2c@10970000 {
 				interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				pinctrl-names = "default";
 				pinctrl-0 = <&hsi2c8_bus>;
+				pinctrl-names = "default";
 				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>,
 					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>;
 				clock-names = "hsi2c", "hsi2c_pclk";