| Message ID | 20240423205006.1785138-7-peter.griffin@linaro.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | HSI2, UFS & UFS phy support for Tensor GS101 | expand |
On Tue, 2024-04-23 at 21:49 +0100, Peter Griffin wrote: > Enable the ufs controller, ufs phy and ufs regulator in device tree. > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> > --- > .../boot/dts/exynos/google/gs101-oriole.dts | 18 ++++++++++ > arch/arm64/boot/dts/exynos/google/gs101.dtsi | 36 +++++++++++++++++++ > 2 files changed, 54 insertions(+) > [...] > + > + ufs_0: ufs@14700000 { > + compatible = "google,gs101-ufs"; > + reg = <0x14700000 0x200>, > + <0x14701100 0x200>, > + <0x14780000 0xa000>, > + <0x14600000 0x100>; > + reg-names = "hci", "vs_hci", "unipro", "ufsp"; > + interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>; > + clocks = <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_ACLK>, > + <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_CLK_UNIPRO>, > + <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_FMP_CLK>, > + <&cmu_hsi2 CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_ACLK>, > + <&cmu_hsi2 CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_PCLK>, > + <&cmu_hsi2 CLK_GOUT_HSI2_SYSREG_HSI2_PCLK>; > + clock-names = "core_clk", "sclk_unipro_main", "fmp", > + "ufs_aclk", "ufs_pclk", "sysreg"; > + freq-table-hz = <0 0>, <0 0>, <0 0>, <0 0>, <0 0>, <0 0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>; The preferred order is pinctrl-0 before pinctrl-names (similar to clock-names and reg-names). Other than that, Acked-by: André Draszik <andre.draszik@linaro.org>
Hi André, On Thu, 25 Apr 2024 at 13:02, André Draszik <andre.draszik@linaro.org> wrote: > > On Tue, 2024-04-23 at 21:49 +0100, Peter Griffin wrote: > > Enable the ufs controller, ufs phy and ufs regulator in device tree. > > > > Signed-off-by: Peter Griffin <peter.griffin@linaro.org> > > --- > > .../boot/dts/exynos/google/gs101-oriole.dts | 18 ++++++++++ > > arch/arm64/boot/dts/exynos/google/gs101.dtsi | 36 +++++++++++++++++++ > > 2 files changed, 54 insertions(+) > > > > [...] > > > + > > + ufs_0: ufs@14700000 { > > + compatible = "google,gs101-ufs"; > > + reg = <0x14700000 0x200>, > > + <0x14701100 0x200>, > > + <0x14780000 0xa000>, > > + <0x14600000 0x100>; > > + reg-names = "hci", "vs_hci", "unipro", "ufsp"; > > + interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>; > > + clocks = <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_ACLK>, > > + <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_CLK_UNIPRO>, > > + <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_FMP_CLK>, > > + <&cmu_hsi2 CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_ACLK>, > > + <&cmu_hsi2 CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_PCLK>, > > + <&cmu_hsi2 CLK_GOUT_HSI2_SYSREG_HSI2_PCLK>; > > + clock-names = "core_clk", "sclk_unipro_main", "fmp", > > + "ufs_aclk", "ufs_pclk", "sysreg"; > > + freq-table-hz = <0 0>, <0 0>, <0 0>, <0 0>, <0 0>, <0 0>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>; > > The preferred order is pinctrl-0 before pinctrl-names (similar to clock-names and reg-names). Will fix > > Other than that, > > Acked-by: André Draszik <andre.draszik@linaro.org> thanks, Peter
diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts index 6be15e990b65..fb32f6ce2a4d 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts +++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts @@ -53,6 +53,15 @@ button-power { wakeup-source; }; }; + + /* TODO: Remove this once S2MPG11 slave PMIC is implemented */ + ufs_0_fixed_vcc_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "ufs-vcc"; + gpio = <&gpp0 1 GPIO_ACTIVE_HIGH>; + regulator-boot-on; + enable-active-high; + }; }; &ext_24_5m { @@ -106,6 +115,15 @@ &serial_0 { status = "okay"; }; +&ufs_0 { + status = "okay"; + vcc-supply = <&ufs_0_fixed_vcc_reg>; +}; + +&ufs_0_phy { + status = "okay"; +}; + &usi_uart { samsung,clkreq-on; /* needed for UART mode */ status = "okay"; diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi index 09044deede63..baf630b13154 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi @@ -1277,6 +1277,42 @@ pinctrl_hsi2: pinctrl@14440000 { interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>; }; + ufs_0_phy: phy@17e04000 { + compatible = "google,gs101-ufs-phy"; + reg = <0x14704000 0x3000>; + reg-names = "phy-pma"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <0>; + clocks = <&ext_24_5m>; + clock-names = "ref_clk"; + status = "disabled"; + }; + + ufs_0: ufs@14700000 { + compatible = "google,gs101-ufs"; + reg = <0x14700000 0x200>, + <0x14701100 0x200>, + <0x14780000 0xa000>, + <0x14600000 0x100>; + reg-names = "hci", "vs_hci", "unipro", "ufsp"; + interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_ACLK>, + <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_CLK_UNIPRO>, + <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_FMP_CLK>, + <&cmu_hsi2 CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_ACLK>, + <&cmu_hsi2 CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_PCLK>, + <&cmu_hsi2 CLK_GOUT_HSI2_SYSREG_HSI2_PCLK>; + clock-names = "core_clk", "sclk_unipro_main", "fmp", + "ufs_aclk", "ufs_pclk", "sysreg"; + freq-table-hz = <0 0>, <0 0>, <0 0>, <0 0>, <0 0>, <0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>; + phys = <&ufs_0_phy>; + phy-names = "ufs-phy"; + samsung,sysreg = <&sysreg_hsi2 0x710>; + status = "disabled"; + }; + cmu_apm: clock-controller@17400000 { compatible = "google,gs101-cmu-apm"; reg = <0x17400000 0x8000>;
Enable the ufs controller, ufs phy and ufs regulator in device tree. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> --- .../boot/dts/exynos/google/gs101-oriole.dts | 18 ++++++++++ arch/arm64/boot/dts/exynos/google/gs101.dtsi | 36 +++++++++++++++++++ 2 files changed, 54 insertions(+)