| Message ID | 345aeebe5561f8f6540f477ae160c5cbf1b0f6d5.1441633456.git.hansverk@cisco.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Sep 07, 2015 at 03:44:35PM +0200, Hans Verkuil wrote: > From: Kamil Debski <kamil@wypas.org> > > Add handling of remote control events coming from the HDMI CEC bus. > This patch includes a new keymap that maps values found in the CEC > messages to the keys pressed and released. Also, a new protocol has > been added to the core. > > Signed-off-by: Kamil Debski <kamil@wypas.org> > Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> (Added Mauro) Hmm, how is rc-cec supposed to be loaded? At boot, I see: [ 16.577704] IR keymap rc-cec not found [ 16.586675] Registered IR keymap rc-empty [ 16.591668] input: RC for dw_hdmi as /devices/soc0/soc/120000.hdmi/rc/rc1/input3 [ 16.597769] rc1: RC for dw_hdmi as /devices/soc0/soc/120000.hdmi/rc/rc1 Yet the rc-cec is a module in the filesystem, but it doesn't seem to be loaded automatically - even after the system has booted, the module hasn't been loaded. It looks like it _should_ be loaded, but this plainly isn't working: map = seek_rc_map(name); #ifdef MODULE if (!map) { int rc = request_module("%s", name); if (rc < 0) { printk(KERN_ERR "Couldn't load IR keymap %s\n", name); return NULL; } msleep(20); /* Give some time for IR to register */ map = seek_rc_map(name); } #endif if (!map) { printk(KERN_ERR "IR keymap %s not found\n", name); return NULL; } Any ideas?
On 10/06/2015 08:05 PM, Russell King - ARM Linux wrote: > On Mon, Sep 07, 2015 at 03:44:35PM +0200, Hans Verkuil wrote: >> From: Kamil Debski <kamil@wypas.org> >> >> Add handling of remote control events coming from the HDMI CEC bus. >> This patch includes a new keymap that maps values found in the CEC >> messages to the keys pressed and released. Also, a new protocol has >> been added to the core. >> >> Signed-off-by: Kamil Debski <kamil@wypas.org> >> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> > > (Added Mauro) > > Hmm, how is rc-cec supposed to be loaded? Is CONFIG_RC_MAP enabled in your config? Ran 'depmod -a'? (Sorry, I'm sure you've done that, just checking...) It's optional as I understand it, since you could configure the keytable from userspace instead of using this module. For the record (just tried it), it does load fine on my setup. BTW, I am still on the fence whether using the kernel RC subsystem is the right thing to do. There are a number of CEC RC commands that use extra parameters that cannot be mapped to the RC API, so you still need to handle those manually. I know Mauro would like to see this integration, but I am wondering whether it really makes sense. What is your opinion on this? Perhaps I should split it off into a separate patch and keep it out from the initial pull request once we're ready for that. Regards, Hans > > At boot, I see: > > [ 16.577704] IR keymap rc-cec not found > [ 16.586675] Registered IR keymap rc-empty > [ 16.591668] input: RC for dw_hdmi as /devices/soc0/soc/120000.hdmi/rc/rc1/input3 > [ 16.597769] rc1: RC for dw_hdmi as /devices/soc0/soc/120000.hdmi/rc/rc1 > > Yet the rc-cec is a module in the filesystem, but it doesn't seem to > be loaded automatically - even after the system has booted, the module > hasn't been loaded. > > It looks like it _should_ be loaded, but this plainly isn't working: > > map = seek_rc_map(name); > #ifdef MODULE > if (!map) { > int rc = request_module("%s", name); > if (rc < 0) { > printk(KERN_ERR "Couldn't load IR keymap %s\n", name); > return NULL; > } > msleep(20); /* Give some time for IR to register */ > > map = seek_rc_map(name); > } > #endif > if (!map) { > printk(KERN_ERR "IR keymap %s not found\n", name); > return NULL; > } > > Any ideas? > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Oct 12, 2015 at 01:50:47PM +0200, Hans Verkuil wrote: > On 10/06/2015 08:05 PM, Russell King - ARM Linux wrote: > > On Mon, Sep 07, 2015 at 03:44:35PM +0200, Hans Verkuil wrote: > >> From: Kamil Debski <kamil@wypas.org> > >> > >> Add handling of remote control events coming from the HDMI CEC bus. > >> This patch includes a new keymap that maps values found in the CEC > >> messages to the keys pressed and released. Also, a new protocol has > >> been added to the core. > >> > >> Signed-off-by: Kamil Debski <kamil@wypas.org> > >> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> > > > > (Added Mauro) > > > > Hmm, how is rc-cec supposed to be loaded? > > Is CONFIG_RC_MAP enabled in your config? Ran 'depmod -a'? (Sorry, I'm sure you've done > that, just checking...) CONFIG_RC_MAP=m and yes, if depmod hadn't have been run, modprobing rc-cec would not have worked - modprobe always looks up in the depmod information to find out where the module is located, and also to determine any dependencies. > It's optional as I understand it, since you could configure the keytable from > userspace instead of using this module. > > For the record (just tried it), it does load fine on my setup. Immediately after boot, I have: # lsmod Module Size Used by ... coda 54685 0 v4l2_mem2mem 14517 1 coda videobuf2_dma_contig 9478 1 coda videobuf2_vmalloc 5529 1 coda videobuf2_memops 1888 2 videobuf2_dma_contig,videobuf2_vmalloc cecd_dw_hdmi 3129 0 # modprobe rc-cec # lsmod Module Size Used by rc_cec 1785 0 ... coda 54685 0 v4l2_mem2mem 14517 1 coda videobuf2_dma_contig 9478 1 coda videobuf2_vmalloc 5529 1 coda videobuf2_memops 1888 2 videobuf2_dma_contig,videobuf2_vmalloc cecd_dw_hdmi 3129 0 So, rc-cec is perfectly loadable, it just doesn't get loaded at boot. Manually loading it like this is useless though - I have to unload cecd_dw_hdmi and then re-load it after rc-cec is loaded for rc-cec to be seen. At that point, (and with the help of a userspace program) things start working as expected. > BTW, I am still on the fence whether using the kernel RC subsystem is > the right thing to do. There are a number of CEC RC commands that use > extra parameters that cannot be mapped to the RC API, so you still > need to handle those manually. Even though it is a remote control which is being forwarded for the most part, but there are operation codes which aren't related to key presses specified by the standard. I don't think there's anything wrong with having a RC interface present, but allowing other interfaces as a possibility is a good thing too - it allows a certain amount of flexibility. For example, with rc-cec loaded and properly bound, I can control at least rhythmbox within gnome using the TVs remote control with no modifications - and that happens because the X server passes on the events it receives via the event device. Given the range of media applications, I think that's key - it needs to at least have the capability to plug into the existing ways of doing things, even if those ways are not perfect. > Perhaps I should split it off into a separate patch and keep it out > from the initial pull request once we're ready for that. I'm biased because it is an enablement feature - it allows CEC to work out of the box with at least some existing media apps. :)
On 10/14/2015 01:09 AM, Russell King - ARM Linux wrote: > On Mon, Oct 12, 2015 at 01:50:47PM +0200, Hans Verkuil wrote: >> On 10/06/2015 08:05 PM, Russell King - ARM Linux wrote: >>> On Mon, Sep 07, 2015 at 03:44:35PM +0200, Hans Verkuil wrote: >>>> From: Kamil Debski <kamil@wypas.org> >>>> >>>> Add handling of remote control events coming from the HDMI CEC bus. >>>> This patch includes a new keymap that maps values found in the CEC >>>> messages to the keys pressed and released. Also, a new protocol has >>>> been added to the core. >>>> >>>> Signed-off-by: Kamil Debski <kamil@wypas.org> >>>> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> >>> >>> (Added Mauro) >>> >>> Hmm, how is rc-cec supposed to be loaded? >> >> Is CONFIG_RC_MAP enabled in your config? Ran 'depmod -a'? (Sorry, I'm sure you've done >> that, just checking...) > > CONFIG_RC_MAP=m > > and yes, if depmod hadn't have been run, modprobing rc-cec would not > have worked - modprobe always looks up in the depmod information to > find out where the module is located, and also to determine any > dependencies. > >> It's optional as I understand it, since you could configure the keytable from >> userspace instead of using this module. >> >> For the record (just tried it), it does load fine on my setup. > > Immediately after boot, I have: > > # lsmod > Module Size Used by > ... > coda 54685 0 > v4l2_mem2mem 14517 1 coda > videobuf2_dma_contig 9478 1 coda > videobuf2_vmalloc 5529 1 coda > videobuf2_memops 1888 2 videobuf2_dma_contig,videobuf2_vmalloc > cecd_dw_hdmi 3129 0 > # modprobe rc-cec > # lsmod > Module Size Used by > rc_cec 1785 0 > ... > coda 54685 0 > v4l2_mem2mem 14517 1 coda > videobuf2_dma_contig 9478 1 coda > videobuf2_vmalloc 5529 1 coda > videobuf2_memops 1888 2 videobuf2_dma_contig,videobuf2_vmalloc > cecd_dw_hdmi 3129 0 > > So, rc-cec is perfectly loadable, it just doesn't get loaded at boot. > Manually loading it like this is useless though - I have to unload > cecd_dw_hdmi and then re-load it after rc-cec is loaded for rc-cec to > be seen. At that point, (and with the help of a userspace program) > things start working as expected. Did you compile and install the v4l-utils found here: http://git.linuxtv.org/cgit.cgi/hverkuil/v4l-utils.git/log/?h=cec I think that the rc_cec module is loaded through some udev rules and keytables that are installed by v4l-utils. The standard v4l-utils doesn't know about cec, but my repo above does. To be honest, I don't really understand how it works, but if you haven't installed it yet then try it and see if that solves the problem. >> BTW, I am still on the fence whether using the kernel RC subsystem is >> the right thing to do. There are a number of CEC RC commands that use >> extra parameters that cannot be mapped to the RC API, so you still >> need to handle those manually. > > Even though it is a remote control which is being forwarded for the > most part, but there are operation codes which aren't related to > key presses specified by the standard. I don't think there's anything > wrong with having a RC interface present, but allowing other interfaces > as a possibility is a good thing too - it allows a certain amount of > flexibility. > > For example, with rc-cec loaded and properly bound, I can control at > least rhythmbox within gnome using the TVs remote control with no > modifications - and that happens because the X server passes on the > events it receives via the event device. > > Given the range of media applications, I think that's key - it needs > to at least have the capability to plug into the existing ways of doing > things, even if those ways are not perfect. > >> Perhaps I should split it off into a separate patch and keep it out >> from the initial pull request once we're ready for that. > > I'm biased because it is an enablement feature - it allows CEC to work > out of the box with at least some existing media apps. :) > OK, useful feedback. I am considering putting the RC code under a kernel config option though. So if the RC core is not enabled or you don't want the RC part to be created, then you can opt to disable it. Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Oct 12, 2015 at 01:50:47PM +0200, Hans Verkuil wrote: > > Yet the rc-cec is a module in the filesystem, but it doesn't seem to > > be loaded automatically - even after the system has booted, the module > > hasn't been loaded. > > > > It looks like it _should_ be loaded, but this plainly isn't working: > > > > map = seek_rc_map(name); > > #ifdef MODULE This is the problem. MODULE is only set when _this_ file is built as a module. If this is built in, but your rc maps are modules, then they won't get loaded because this symbol will not be defined. It needs to be CONFIG_MODULES - and when it is, the rc-cec module is automatically loaded.
diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile index fbbd3bb..9cffcc6 100644 --- a/drivers/media/rc/keymaps/Makefile +++ b/drivers/media/rc/keymaps/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \ rc-behold.o \ rc-behold-columbus.o \ rc-budget-ci-old.o \ + rc-cec.o \ rc-cinergy-1400.o \ rc-cinergy.o \ rc-delock-61959.o \ diff --git a/drivers/media/rc/keymaps/rc-cec.c b/drivers/media/rc/keymaps/rc-cec.c new file mode 100644 index 0000000..193cdca --- /dev/null +++ b/drivers/media/rc/keymaps/rc-cec.c @@ -0,0 +1,174 @@ +/* Keytable for the CEC remote control + * + * Copyright (c) 2015 by Kamil Debski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <media/rc-map.h> +#include <linux/module.h> + +/* CEC Spec "High-Definition Multimedia Interface Specification" can be obtained + * here: http://xtreamerdev.googlecode.com/files/CEC_Specs.pdf + * The list of control codes is listed in Table 27: User Control Codes p. 95 */ + +static struct rc_map_table cec[] = { + { 0x00, KEY_OK }, + { 0x01, KEY_UP }, + { 0x02, KEY_DOWN }, + { 0x03, KEY_LEFT }, + { 0x04, KEY_RIGHT }, + { 0x05, KEY_RIGHT_UP }, + { 0x06, KEY_RIGHT_DOWN }, + { 0x07, KEY_LEFT_UP }, + { 0x08, KEY_LEFT_DOWN }, + { 0x09, KEY_ROOT_MENU }, /* CEC Spec: Device Root Menu - see Note 2 */ + /* Note 2: This is the initial display that a device shows. It is + * device-dependent and can be, for example, a contents menu, setup + * menu, favorite menu or other menu. The actual menu displayed + * may also depend on the device's current state. */ + { 0x0a, KEY_SETUP }, + { 0x0b, KEY_MENU }, /* CEC Spec: Contents Menu */ + { 0x0c, KEY_FAVORITES }, /* CEC Spec: Favorite Menu */ + { 0x0d, KEY_EXIT }, + /* 0x0e-0x0f: Reserved */ + { 0x10, KEY_MEDIA_TOP_MENU }, + { 0x11, KEY_CONTEXT_MENU }, + /* 0x12-0x1c: Reserved */ + { 0x1d, KEY_DIGITS }, /* CEC Spec: select/toggle a Number Entry Mode */ + { 0x1e, KEY_NUMERIC_11 }, + { 0x1f, KEY_NUMERIC_12 }, + /* 0x20-0x29: Keys 0 to 9 */ + { 0x20, KEY_NUMERIC_0 }, + { 0x21, KEY_NUMERIC_1 }, + { 0x22, KEY_NUMERIC_2 }, + { 0x23, KEY_NUMERIC_3 }, + { 0x24, KEY_NUMERIC_4 }, + { 0x25, KEY_NUMERIC_5 }, + { 0x26, KEY_NUMERIC_6 }, + { 0x27, KEY_NUMERIC_7 }, + { 0x28, KEY_NUMERIC_8 }, + { 0x29, KEY_NUMERIC_9 }, + { 0x2a, KEY_DOT }, + { 0x2b, KEY_ENTER }, + { 0x2c, KEY_CLEAR }, + /* 0x2d-0x2e: Reserved */ + { 0x2f, KEY_NEXT_FAVORITE }, /* CEC Spec: Next Favorite */ + { 0x30, KEY_CHANNELUP }, + { 0x31, KEY_CHANNELDOWN }, + { 0x32, KEY_PREVIOUS }, /* CEC Spec: Previous Channel */ + { 0x33, KEY_SOUND }, /* CEC Spec: Sound Select */ + { 0x34, KEY_VIDEO }, /* 0x34: CEC Spec: Input Select */ + { 0x35, KEY_INFO }, /* CEC Spec: Display Information */ + { 0x36, KEY_HELP }, + { 0x37, KEY_PAGEUP }, + { 0x38, KEY_PAGEDOWN }, + /* 0x39-0x3f: Reserved */ + { 0x40, KEY_POWER }, + { 0x41, KEY_VOLUMEUP }, + { 0x42, KEY_VOLUMEDOWN }, + { 0x43, KEY_MUTE }, + { 0x44, KEY_PLAYCD }, + { 0x45, KEY_STOPCD }, + { 0x46, KEY_PAUSECD }, + { 0x47, KEY_RECORD }, + { 0x48, KEY_REWIND }, + { 0x49, KEY_FASTFORWARD }, + { 0x4a, KEY_EJECTCD }, /* CEC Spec: Eject */ + { 0x4b, KEY_FORWARD }, + { 0x4c, KEY_BACK }, + { 0x4d, KEY_STOP_RECORD }, /* CEC Spec: Stop-Record */ + { 0x4e, KEY_PAUSE_RECORD }, /* CEC Spec: Pause-Record */ + /* 0x4f: Reserved */ + { 0x50, KEY_ANGLE }, + { 0x51, KEY_TV2 }, + { 0x52, KEY_VOD }, /* CEC Spec: Video on Demand */ + { 0x53, KEY_EPG }, + { 0x54, KEY_TIME }, /* CEC Spec: Timer */ + { 0x55, KEY_CONFIG }, + /* The following codes are hard to implement at this moment, as they + * carry an additional additional argument. Most likely changes to RC + * framework are necessary. + * For now they are interpreted by the CEC framework as non keycodes + * and are passed as messages enabling user application to parse them. + * */ + /* 0x56: CEC Spec: Select Broadcast Type */ + /* 0x57: CEC Spec: Select Sound presentation */ + { 0x58, KEY_AUDIO_DESC }, /* CEC 2.0 and up */ + { 0x59, KEY_WWW }, /* CEC 2.0 and up */ + { 0x5a, KEY_3D_MODE }, /* CEC 2.0 and up */ + /* 0x5b-0x5f: Reserved */ + { 0x60, KEY_PLAYCD }, /* CEC Spec: Play Function */ + { 0x6005, KEY_FASTFORWARD }, + { 0x6006, KEY_FASTFORWARD }, + { 0x6007, KEY_FASTFORWARD }, + { 0x6015, KEY_SLOW }, + { 0x6016, KEY_SLOW }, + { 0x6017, KEY_SLOW }, + { 0x6009, KEY_FASTREVERSE }, + { 0x600a, KEY_FASTREVERSE }, + { 0x600b, KEY_FASTREVERSE }, + { 0x6019, KEY_SLOWREVERSE }, + { 0x601a, KEY_SLOWREVERSE }, + { 0x601b, KEY_SLOWREVERSE }, + { 0x6020, KEY_REWIND }, + { 0x6024, KEY_PLAYCD }, + { 0x6025, KEY_PAUSECD }, + { 0x61, KEY_PLAYPAUSE }, /* CEC Spec: Pause-Play Function */ + { 0x62, KEY_RECORD }, /* Spec: Record Function */ + { 0x63, KEY_PAUSE_RECORD }, /* CEC Spec: Pause-Record Function */ + { 0x64, KEY_STOPCD }, /* CEC Spec: Stop Function */ + { 0x65, KEY_MUTE }, /* CEC Spec: Mute Function */ + { 0x66, KEY_UNMUTE }, /* CEC Spec: Restore the volume */ + /* The following codes are hard to implement at this moment, as they + * carry an additional additional argument. Most likely changes to RC + * framework are necessary. + * For now they are interpreted by the CEC framework as non keycodes + * and are passed as messages enabling user application to parse them. + * */ + /* 0x67: CEC Spec: Tune Function */ + /* 0x68: CEC Spec: Seleect Media Function */ + /* 0x69: CEC Spec: Select A/V Input Function */ + /* 0x6a: CEC Spec: Select Audio Input Function */ + { 0x6b, KEY_POWER }, /* CEC Spec: Power Toggle Function */ + { 0x6c, KEY_SLEEP }, /* CEC Spec: Power Off Function */ + { 0x6d, KEY_WAKEUP }, /* CEC Spec: Power On Function */ + /* 0x6e-0x70: Reserved */ + { 0x71, KEY_BLUE }, /* CEC Spec: F1 (Blue) */ + { 0x72, KEY_RED }, /* CEC Spec: F2 (Red) */ + { 0x73, KEY_GREEN }, /* CEC Spec: F3 (Green) */ + { 0x74, KEY_YELLOW }, /* CEC Spec: F4 (Yellow) */ + { 0x75, KEY_F5 }, + { 0x76, KEY_DATA }, /* CEC Spec: Data - see Note 3 */ + /* Note 3: This is used, for example, to enter or leave a digital TV + * data broadcast application. */ + /* 0x77-0xff: Reserved */ +}; + +static struct rc_map_list cec_map = { + .map = { + .scan = cec, + .size = ARRAY_SIZE(cec), + .rc_type = RC_TYPE_CEC, + .name = RC_MAP_CEC, + } +}; + +static int __init init_rc_map_cec(void) +{ + return rc_map_register(&cec_map); +} + +static void __exit exit_rc_map_cec(void) +{ + rc_map_unregister(&cec_map); +} + +module_init(init_rc_map_cec); +module_exit(exit_rc_map_cec); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Kamil Debski"); diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index d08cedb..b5949bc 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -801,6 +801,7 @@ static struct { { RC_BIT_SHARP, "sharp" }, { RC_BIT_MCE_KBD, "mce_kbd" }, { RC_BIT_XMP, "xmp" }, + { RC_BIT_CEC, "cec" }, }; /** diff --git a/include/media/rc-core.h b/include/media/rc-core.h index 63eb521..155671b 100644 --- a/include/media/rc-core.h +++ b/include/media/rc-core.h @@ -32,6 +32,7 @@ do { \ enum rc_driver_type { RC_DRIVER_SCANCODE = 0, /* Driver or hardware generates a scancode */ RC_DRIVER_IR_RAW, /* Needs a Infra-Red pulse/space decoder */ + RC_DRIVER_CEC, }; /** diff --git a/include/media/rc-map.h b/include/media/rc-map.h index 7c4bbc4..d9f87d5 100644 --- a/include/media/rc-map.h +++ b/include/media/rc-map.h @@ -31,6 +31,7 @@ enum rc_type { RC_TYPE_RC6_MCE = 16, /* MCE (Philips RC6-6A-32 subtype) protocol */ RC_TYPE_SHARP = 17, /* Sharp protocol */ RC_TYPE_XMP = 18, /* XMP protocol */ + RC_TYPE_CEC = 19, /* CEC protocol */ }; #define RC_BIT_NONE 0 @@ -53,6 +54,7 @@ enum rc_type { #define RC_BIT_RC6_MCE (1 << RC_TYPE_RC6_MCE) #define RC_BIT_SHARP (1 << RC_TYPE_SHARP) #define RC_BIT_XMP (1 << RC_TYPE_XMP) +#define RC_BIT_CEC (1 << RC_TYPE_CEC) #define RC_BIT_ALL (RC_BIT_UNKNOWN | RC_BIT_OTHER | \ RC_BIT_RC5 | RC_BIT_RC5X | RC_BIT_RC5_SZ | \ @@ -61,7 +63,7 @@ enum rc_type { RC_BIT_NEC | RC_BIT_SANYO | RC_BIT_MCE_KBD | \ RC_BIT_RC6_0 | RC_BIT_RC6_6A_20 | RC_BIT_RC6_6A_24 | \ RC_BIT_RC6_6A_32 | RC_BIT_RC6_MCE | RC_BIT_SHARP | \ - RC_BIT_XMP) + RC_BIT_XMP | RC_BIT_CEC) #define RC_SCANCODE_UNKNOWN(x) (x) @@ -123,6 +125,7 @@ void rc_map_init(void); #define RC_MAP_BEHOLD_COLUMBUS "rc-behold-columbus" #define RC_MAP_BEHOLD "rc-behold" #define RC_MAP_BUDGET_CI_OLD "rc-budget-ci-old" +#define RC_MAP_CEC "rc-cec" #define RC_MAP_CINERGY_1400 "rc-cinergy-1400" #define RC_MAP_CINERGY "rc-cinergy" #define RC_MAP_DELOCK_61959 "rc-delock-61959"