| Message ID | 3d10d013-b18c-e10e-b596-d4d0f8b6e973@samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Monday, November 7, 2016 4:41:58 PM CET Sylwester Nawrocki wrote: > On 11/05/2016 12:26 AM, Arnd Bergmann wrote: > > static const struct dma_slave_map s3c64xx_dma1_slave_map[] = { > - { "samsung-pcm.1", "tx", (void *)"pcm1_tx" }, > - { "samsung-pcm.1", "rx", (void *)"pcm1_rx" }, > - { "samsung-i2s.1", "tx", (void *)"i2s1_tx" }, > - { "samsung-i2s.1", "rx", (void *)"i2s1_rx" }, > - { "s3c6410-spi.1", "tx", (void *)"spi1_tx" }, > - { "s3c6410-spi.1", "rx", (void *)"spi1_rx" }, > + { "samsung-pcm.1", "tx", (void *)&s3c64xx_dma1_info[0] }, > + { "samsung-pcm.1", "rx", (void *)&s3c64xx_dma1_info[1] }, > + { "samsung-i2s.1", "tx", (void *)&s3c64xx_dma1_info[2] }, > + { "samsung-i2s.1", "rx", (void *)&s3c64xx_dma1_info[3] }, > + { "s3c6410-spi.1", "tx", (void *)&s3c64xx_dma1_info[4] }, > + { "s3c6410-spi.1", "rx", (void *)&s3c64xx_dma1_info[5] }, > }; > I think you can drop the (void*) cast either way (before and after this change). > diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c > index d5c75c8..0d1eb2e 100644 > --- a/drivers/dma/amba-pl08x.c > +++ b/drivers/dma/amba-pl08x.c > @@ -1793,6 +1793,23 @@ bool pl08x_filter_id(struct dma_chan *chan, void *chan_id) > } > EXPORT_SYMBOL_GPL(pl08x_filter_id); > > +static bool pl08x_filter_fn(struct dma_chan *chan, void *chan_id) > +{ > + struct pl08x_dma_chan *plchan; > + > + /* Reject channels for devices not bound to this driver */ > + if (chan->device->dev->driver != &pl08x_amba_driver.drv) > + return false; This check should not be needed, you only get channels for the device itself. > + plchan = to_pl08x_chan(chan); > + > + /* Check that the channel is not taken! */ > + if (plchan->cd == chan_id) > + return true; What I had in mind was a bit different: Instead of comparing the channel, I was thinking of modifying the channel itself, something like: plchan->signal = chan_id->signal; plchan->periph_buses = chan_id->periph_buses; after that, remove the plchan->cd data. Unfortunately, the muxing in arch/arm/mach-spear/ makes this a bit harder. I'd have to think about it some more. It may be easier to do this after moving spear and lpc32xx over to use dma_slave_map. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 11/07/2016 08:55 PM, Arnd Bergmann wrote: >> diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c >> > index d5c75c8..0d1eb2e 100644 >> > --- a/drivers/dma/amba-pl08x.c >> > +++ b/drivers/dma/amba-pl08x.c >> > @@ -1793,6 +1793,23 @@ bool pl08x_filter_id(struct dma_chan *chan, void *chan_id) >> > } [...] >> > +static bool pl08x_filter_fn(struct dma_chan *chan, void *chan_id) >> > +{ >> > + struct pl08x_dma_chan *plchan; [...] >> > + plchan = to_pl08x_chan(chan); >> > + >> > + /* Check that the channel is not taken! */ >> > + if (plchan->cd == chan_id) >> > + return true; > > What I had in mind was a bit different: Instead of comparing the > channel, I was thinking of modifying the channel itself, something > like: > > plchan->signal = chan_id->signal; > plchan->periph_buses = chan_id->periph_buses; > > after that, remove the plchan->cd data. Unfortunately, the muxing in > arch/arm/mach-spear/ makes this a bit harder. I'd have to think > about it some more. It may be easier to do this after moving > spear and lpc32xx over to use dma_slave_map. I've posted updated version of this patch, please let me know if you have any further comments.
diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c index 8c88680..556ce74 100644 --- a/arch/arm/mach-s3c64xx/pl080.c +++ b/arch/arm/mach-s3c64xx/pl080.c @@ -118,22 +118,22 @@ static void pl08x_put_xfer_signal(const struct pl08x_channel_data *cd, int ch) }; static const struct dma_slave_map s3c64xx_dma0_slave_map[] = { - { "s3c6400-uart.0", "tx", (void *)"uart0_tx" }, - { "s3c6400-uart.0", "rx", (void *)"uart0_rx" }, - { "s3c6400-uart.1", "tx", (void *)"uart1_tx" }, - { "s3c6400-uart.1", "rx", (void *)"uart1_rx" }, - { "s3c6400-uart.2", "tx", (void *)"uart2_tx" }, - { "s3c6400-uart.2", "rx", (void *)"uart2_rx" }, - { "s3c6400-uart.3", "tx", (void *)"uart3_tx" }, - { "s3c6400-uart.3", "rx", (void *)"uart3_rx" }, - { "samsung-pcm.0", "tx", (void *)"pcm0_tx" }, - { "samsung-pcm.0", "rx", (void *)"pcm0_rx" }, - { "samsung-i2s.0", "tx", (void *)"i2s0_tx" }, - { "samsung-i2s.0", "rx", (void *)"i2s0_rx" }, - { "s3c6410-spi.0", "tx", (void *)"spi0_tx" }, - { "s3c6410-spi.0", "rx", (void *)"spi0_rx" }, - { "samsung-i2s.2", "tx", (void *)"i2s2_tx" }, - { "samsung-i2s.2", "rx", (void *)"i2s2_rx" }, + { "s3c6400-uart.0", "tx", (void *)&s3c64xx_dma0_info[0] }, + { "s3c6400-uart.0", "rx", (void *)&s3c64xx_dma0_info[1] }, + { "s3c6400-uart.1", "tx", (void *)&s3c64xx_dma0_info[2] }, + { "s3c6400-uart.1", "rx", (void *)&s3c64xx_dma0_info[3] }, + { "s3c6400-uart.2", "tx", (void *)&s3c64xx_dma0_info[4] }, + { "s3c6400-uart.2", "rx", (void *)&s3c64xx_dma0_info[5] }, + { "s3c6400-uart.3", "tx", (void *)&s3c64xx_dma0_info[6] }, + { "s3c6400-uart.3", "rx", (void *)&s3c64xx_dma0_info[7] }, + { "samsung-pcm.0", "tx", (void *)&s3c64xx_dma0_info[8] }, + { "samsung-pcm.0", "rx", (void *)&s3c64xx_dma0_info[9] }, + { "samsung-i2s.0", "tx", (void *)&s3c64xx_dma0_info[10] }, + { "samsung-i2s.0", "rx", (void *)&s3c64xx_dma0_info[11] }, + { "s3c6410-spi.0", "tx", (void *)&s3c64xx_dma0_info[12] }, + { "s3c6410-spi.0", "rx", (void *)&s3c64xx_dma0_info[13] }, + { "samsung-i2s.2", "tx", (void *)&s3c64xx_dma0_info[14] }, + { "samsung-i2s.2", "rx", (void *)&s3c64xx_dma0_info[15] }, }; @@ -229,12 +229,12 @@ static AMBA_AHB_DEVICE(s3c64xx_dma0, "dma-pl080s.0", 0, }; static const struct dma_slave_map s3c64xx_dma1_slave_map[] = { - { "samsung-pcm.1", "tx", (void *)"pcm1_tx" }, - { "samsung-pcm.1", "rx", (void *)"pcm1_rx" }, - { "samsung-i2s.1", "tx", (void *)"i2s1_tx" }, - { "samsung-i2s.1", "rx", (void *)"i2s1_rx" }, - { "s3c6410-spi.1", "tx", (void *)"spi1_tx" }, - { "s3c6410-spi.1", "rx", (void *)"spi1_rx" }, + { "samsung-pcm.1", "tx", (void *)&s3c64xx_dma1_info[0] }, + { "samsung-pcm.1", "rx", (void *)&s3c64xx_dma1_info[1] }, + { "samsung-i2s.1", "tx", (void *)&s3c64xx_dma1_info[2] }, + { "samsung-i2s.1", "rx", (void *)&s3c64xx_dma1_info[3] }, + { "s3c6410-spi.1", "tx", (void *)&s3c64xx_dma1_info[4] }, + { "s3c6410-spi.1", "rx", (void *)&s3c64xx_dma1_info[5] }, }; diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index d5c75c8..0d1eb2e 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1793,6 +1793,23 @@ bool pl08x_filter_id(struct dma_chan *chan, void *chan_id) } EXPORT_SYMBOL_GPL(pl08x_filter_id); +static bool pl08x_filter_fn(struct dma_chan *chan, void *chan_id) +{ + struct pl08x_dma_chan *plchan; + + /* Reject channels for devices not bound to this driver */ + if (chan->device->dev->driver != &pl08x_amba_driver.drv) + return false; + + plchan = to_pl08x_chan(chan); + + /* Check that the channel is not taken! */ + if (plchan->cd == chan_id) + return true; + + return false; +} + /* * Just check that the device is there and active * TODO: turn this bit on/off depending on the number of physical channels @@ -2310,6 +2327,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) } else { pl08x->slave.filter.map = pl08x->pd->slave_map; pl08x->slave.filter.mapcnt = pl08x->pd->slave_map_len; + pl08x->slave.filter.fn = pl08x_filter_fn; }