@@ -1,12 +1,13 @@
/*
- * Google Snow board device tree source
+ * Google Spring board device tree source
*
- * Copyright (c) 2012 Google, Inc
+ * Copyright (c) 2013 Google, Inc
+ * Copyright (c) 2014 SUSE LINUX Products GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
@@ -14,26 +15,21 @@
#include "exynos5250.dtsi"
/ {
- model = "Google Snow";
- compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
-
- aliases {
- i2c104 = &i2c_104;
- };
+ model = "Google Spring";
+ compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
memory {
reg = <0x40000000 0x80000000>;
};
chosen {
- };
-
- rtc@101E0000 {
- status = "okay";
+ bootargs = "console=tty1";
};
gpio-keys {
compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_key_irq>, <&lid_irq>;
power {
label = "Power";
@@ -52,145 +48,12 @@
};
};
- vbat: vbat-fixed-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vbat-supply";
- regulator-boot-on;
- };
-
- i2c-arbitrator {
- compatible = "i2c-arb-gpio-challenge";
- #address-cells = <1>;
- #size-cells = <0>;
-
- i2c-parent = <&{/i2c@12CA0000}>;
-
- our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
- their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
- slew-delay-us = <10>;
- wait-retry-us = <3000>;
- wait-free-us = <50000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&arb_our_claim &arb_their_claim>;
-
- /* Use ID 104 as a hint that we're on physical bus 4 */
- i2c_104: i2c@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- battery: sbs-battery@b {
- compatible = "sbs,sbs-battery";
- reg = <0xb>;
- sbs,poll-retry-count = <1>;
- };
-
- cros_ec: embedded-controller {
- compatible = "google,cros-ec-i2c";
- reg = <0x1e>;
- interrupts = <6 0>;
- interrupt-parent = <&gpx1>;
- pinctrl-names = "default";
- pinctrl-0 = <&ec_irq>;
- wakeup-source;
- };
-
- power-regulator {
- compatible = "ti,tps65090";
- reg = <0x48>;
-
- /*
- * Config irq to disable internal pulls
- * even though we run in polling mode.
- */
- pinctrl-names = "default";
- pinctrl-0 = <&tps65090_irq>;
-
- vsys1-supply = <&vbat>;
- vsys2-supply = <&vbat>;
- vsys3-supply = <&vbat>;
- infet1-supply = <&vbat>;
- infet2-supply = <&vbat>;
- infet3-supply = <&vbat>;
- infet4-supply = <&vbat>;
- infet5-supply = <&vbat>;
- infet6-supply = <&vbat>;
- infet7-supply = <&vbat>;
- vsys-l1-supply = <&vbat>;
- vsys-l2-supply = <&vbat>;
-
- regulators {
- dcdc1 {
- ti,enable-ext-control;
- };
- dcdc2 {
- ti,enable-ext-control;
- };
- dcdc3 {
- ti,enable-ext-control;
- };
- fet1 {
- regulator-name = "vcd_led";
- ti,overcurrent-wait = <3>;
- };
- tps65090_fet2: fet2 {
- regulator-name = "video_mid";
- regulator-always-on;
- ti,overcurrent-wait = <3>;
- };
- fet3 {
- regulator-name = "wwan_r";
- regulator-always-on;
- ti,overcurrent-wait = <3>;
- };
- fet4 {
- regulator-name = "sdcard";
- ti,overcurrent-wait = <3>;
- };
- fet5 {
- regulator-name = "camout";
- regulator-always-on;
- ti,overcurrent-wait = <3>;
- };
- fet6 {
- regulator-name = "lcd_vdd";
- ti,overcurrent-wait = <3>;
- };
- tps65090_fet7: fet7 {
- regulator-name = "video_mid_1a";
- regulator-always-on;
- ti,overcurrent-wait = <3>;
- };
- ldo1 {
- };
- ldo2 {
- };
- };
-
- charger {
- compatible = "ti,tps65090-charger";
- };
- };
- };
- };
-
- sound {
- compatible = "google,snow-audio-max98095";
-
- samsung,model = "Snow-I2S-MAX98095";
- samsung,i2s-controller = <&i2s0>;
- samsung,audio-codec = <&max98095>;
- };
-
usb3_vbus_reg: regulator-usb3 {
compatible = "regulator-fixed";
regulator-name = "P5.0V_USB3CON";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb3_vbus_en>;
+ gpio = <&gpe1 0 GPIO_ACTIVE_LOW>;
enable-active-high;
};
@@ -198,6 +61,11 @@
samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
};
+ usb-hub {
+ compatible = "smsc,usb3503a";
+ reset-gpios = <&hsic_reset>;
+ };
+
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
@@ -211,19 +79,10 @@
pinctrl-0 = <&hdmi_hpd_irq>;
phy = <&hdmiphy>;
ddc = <&i2c_2>;
- hdmi-en-supply = <&tps65090_fet7>;
- vdd-supply = <&ldo8_reg>;
- vdd_osc-supply = <&ldo10_reg>;
- vdd_pll-supply = <&ldo8_reg>;
- };
-
- backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm 0 1000000 0>;
- brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
- default-brightness-level = <7>;
- pinctrl-0 = <&pwm0_out>;
- pinctrl-names = "default";
+ hdmi-en-supply = <&s5m_ldo8_reg>;
+ vdd-supply = <&s5m_ldo8_reg>;
+ vdd_osc-supply = <&s5m_ldo10_reg>;
+ vdd_pll-supply = <&s5m_ldo8_reg>;
};
fimd@14400000 {
@@ -240,172 +99,241 @@
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
- samsung,lane-count = <2>;
- samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
-
- display-timings {
- native-mode = <&timing1>;
-
- timing1: timing@1 {
- clock-frequency = <70589280>;
- hactive = <1366>;
- vactive = <768>;
- hfront-porch = <40>;
- hback-porch = <40>;
- hsync-len = <32>;
- vback-porch = <10>;
- vfront-porch = <12>;
- vsync-len = <6>;
- };
- };
+ samsung,lane-count = <1>;
+ samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
};
};
+&dp_hpd {
+ samsung,pins = "gpc3-0";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+};
+
&i2c_0 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
- max77686@09 {
- compatible = "maxim,max77686";
+ s5m8767-pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
interrupt-parent = <&gpx3>;
interrupts = <2 0>;
pinctrl-names = "default";
- pinctrl-0 = <&max77686_irq>;
+ pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
wakeup-source;
- reg = <0x09>;
- #clock-cells = <1>;
- voltage-regulators {
- ldo1_reg: LDO1 {
- regulator-name = "P1.0V_LDO_OUT1";
+ s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
+ <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
+ <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
+
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
+ <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
+ <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
+
+ /*
+ * The following arrays of DVS voltages are not used, since we are
+ * not using GPIOs to control PMIC bucks, but they must be defined
+ * to please the driver.
+ */
+ s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+ <1250000>, <1200000>,
+ <1150000>, <1100000>,
+ <1000000>, <950000>;
+
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1000000>, <1000000>,
+ <1000000>, <1000000>;
+
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ clocks {
+ compatible = "samsung,s5m8767-clk";
+ #clock-cells = <1>;
+ clock-output-names = "en32khz_ap",
+ "en32khz_cp",
+ "en32khz_bt";
+ };
+
+ regulators {
+ s5m_ldo4_reg: LDO4 {
+ regulator-name = "P1.0V_LDO_OUT4";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ op_mode = <0>;
};
- ldo2_reg: LDO2 {
- regulator-name = "P1.8V_LDO_OUT2";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ s5m_ldo5_reg: LDO5 {
+ regulator-name = "P1.0V_LDO_OUT5";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
regulator-always-on;
+ op_mode = <0>;
};
- ldo3_reg: LDO3 {
- regulator-name = "P1.8V_LDO_OUT3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ s5m_ldo6_reg: LDO6 {
+ regulator-name = "vdd_mydp";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
regulator-always-on;
+ op_mode = <3>;
};
- ldo7_reg: LDO7 {
+ s5m_ldo7_reg: LDO7 {
regulator-name = "P1.1V_LDO_OUT7";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
+ op_mode = <3>;
};
- ldo8_reg: LDO8 {
+ s5m_ldo8_reg: LDO8 {
regulator-name = "P1.0V_LDO_OUT8";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ op_mode = <3>;
};
- ldo10_reg: LDO10 {
+ s5m_ldo10_reg: LDO10 {
regulator-name = "P1.8V_LDO_OUT10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ op_mode = <3>;
};
- ldo12_reg: LDO12 {
+ s5m_ldo11_reg: LDO11 {
+ regulator-name = "P1.8V_LDO_OUT11";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ s5m_ldo12_reg: LDO12 {
regulator-name = "P3.0V_LDO_OUT12";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
+ op_mode = <3>;
+ };
+
+ s5m_ldo13_reg: LDO13 {
+ regulator-name = "P1.8V_LDO_OUT13";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <0>;
};
- ldo14_reg: LDO14 {
+ s5m_ldo14_reg: LDO14 {
regulator-name = "P1.8V_LDO_OUT14";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ op_mode = <3>;
};
- ldo15_reg: LDO15 {
+ s5m_ldo15_reg: LDO15 {
regulator-name = "P1.0V_LDO_OUT15";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+ op_mode = <3>;
};
- ldo16_reg: LDO16 {
+ s5m_ldo16_reg: LDO16 {
regulator-name = "P1.8V_LDO_OUT16";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+ op_mode = <3>;
+ };
+
+ s5m_ldo17_reg: LDO17 {
+ regulator-name = "P2.8V_LDO_OUT17";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ s5m_ldo25_reg: LDO25 {
+ regulator-name = "vdd_bridge";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ op_mode = <1>;
};
- buck1_reg: BUCK1 {
+ BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
+ op_mode = <3>;
};
- buck2_reg: BUCK2 {
+ BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
+ op_mode = <3>;
};
- buck3_reg: BUCK3 {
+ BUCK3 {
regulator-name = "vdd_int";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
+ op_mode = <3>;
};
- buck4_reg: BUCK4 {
+ BUCK4 {
regulator-name = "vdd_g3d";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1300000>;
- regulator-always-on;
regulator-boot-on;
+ op_mode = <3>;
};
- buck5_reg: BUCK5 {
+ BUCK5 {
regulator-name = "P1.8V_BUCK_OUT5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
+ op_mode = <1>;
};
- buck6_reg: BUCK6 {
- regulator-name = "P1.35V_BUCK_OUT6";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "P2.0V_BUCK_OUT7";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
+ BUCK6 {
+ regulator-name = "P1.2V_BUCK_OUT6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
regulator-always-on;
+ regulator-boot-on;
+ op_mode = <0>;
};
- buck8_reg: BUCK8 {
- regulator-name = "P2.85V_BUCK_OUT8";
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
+ BUCK9 {
+ regulator-name = "vdd_ummc";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <3000000>;
regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
};
};
};
@@ -415,14 +343,6 @@
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
-
- trackpad {
- reg = <0x67>;
- compatible = "cypress,cyapa";
- interrupts = <2 0>;
- interrupt-parent = <&gpx1>;
- wakeup-source;
- };
};
/*
@@ -454,6 +374,16 @@
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
+
+ cros_ec: embedded-controller {
+ compatible = "google,cros-ec-i2c";
+ reg = <0x1e>;
+ interrupts = <6 0>;
+ interrupt-parent = <&gpx1>;
+ wakeup-source;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ec_irq>;
+ };
};
&i2c_5 {
@@ -466,13 +396,6 @@
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
-
- max98095: codec@11 {
- compatible = "maxim,max98095";
- reg = <0x11>;
- pinctrl-0 = <&max98095_en>;
- pinctrl-names = "default";
- };
};
&i2c_8 {
@@ -508,29 +431,7 @@
};
};
-&mmc_2 {
- status = "okay";
- num-slots = <1>;
- supports-highspeed;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- wp-gpios = <&gpc2 1 0>;
- };
-};
-
-/*
- * On Snow we've got SIP WiFi and so can keep drive strengths low to
- * reduce EMI.
- */
-&mmc_3 {
+&mmc_1 {
status = "okay";
num-slots = <1>;
supports-highspeed;
@@ -540,7 +441,7 @@
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
- pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
slot@0 {
reg = <0>;
@@ -549,8 +450,15 @@
};
&pinctrl_0 {
- max77686_irq: max77686-irq {
- samsung,pins = "gpx3-2";
+ s5m8767_dvs: s5m8767-dvs {
+ samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ power_key_irq: power-key-irq {
+ samsung,pins = "gpx1-3";
samsung,pin-function = <0>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
@@ -563,23 +471,23 @@
samsung,pin-drv = <0>;
};
- max98095_en: max98095-en {
- samsung,pins = "gpx1-7";
+ s5m8767_ds: s5m8767-ds {
+ samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
+ samsung,pin-pud = <1>;
samsung,pin-drv = <0>;
};
- tps65090_irq: tps65090-irq {
- samsung,pins = "gpx2-6";
+ s5m8767_irq: s5m8767-irq {
+ samsung,pins = "gpx3-2";
samsung,pin-function = <0>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
- usb3_vbus_en: usb3-vbus-en {
- samsung,pins = "gpx2-7";
- samsung,pin-function = <1>;
+ lid_irq: lid-irq {
+ samsung,pins = "gpx3-5";
+ samsung,pin-function = <0>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
@@ -593,31 +501,28 @@
};
&pinctrl_1 {
- arb_their_claim: arb-their-claim {
- samsung,pins = "gpe0-4";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- arb_our_claim: arb-our-claim {
- samsung,pins = "gpf0-3";
+ hsic_reset: hsic-reset {
+ samsung,pins = "gpe1-0";
samsung,pin-function = <1>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};
-&sd3_clk {
+&sd1_clk {
samsung,pin-drv = <0>;
};
-&sd3_cmd {
+&sd1_cmd {
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
-&sd3_bus4 {
+&sd1_cd {
+ samsung,pin-drv = <0>;
+};
+
+&sd1_bus4 {
samsung,pin-drv = <0>;
};