diff mbox

[RESEND,1/1] ARM: dts: Add LEDs on odroid XU3 board

Message ID 552B81CA.4090102@fivetechno.de (mailing list archive)
State New, archived
Headers show

Commit Message

Markus Reichl April 13, 2015, 8:43 a.m. UTC 
This patch adds the RGB-LED on XU3 as 3 gpio-leds.
It is derived from hardkernel's 3.10 tree.

Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
---
 arch/arm/boot/dts/exynos5422-odroidxu3.dts | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index a519c86..0a32302 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -278,6 +278,30 @@ 
 	rtc@101E0000 {
 		status = "okay";
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat {
+			label = "blue:heartbeart";
+			gpios = <&gpb2 2 0>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		eMMC {
+			label = "green:eMMC";
+			gpios = <&gpb2 1 0>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+
+		microSD {
+			label = "red:microSD";
+			gpios = <&gpx2 3 0>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+	};
 };
 
 &hdmi {