| Message ID | 6fed900bf831d8bc23ef56c95417887c3d9a2d07.1446122247.git.p.fedin@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Pavel, On 29 October 2015 at 18:12, Pavel Fedin <p.fedin@samsung.com> wrote: > The chip is smsc9115, connected via SROMc bank 3. Additionally, some GPIO > initialization is required. > > Signed-off-by: Pavel Fedin <p.fedin@samsung.com> > --- > arch/arm/boot/dts/exynos5410-smdk5410.dts | 41 +++++++++++++++++++++++++++++++ > 1 file changed, 41 insertions(+) > > diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts > index cebeaab..311e7be 100644 > --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts > +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts > @@ -61,6 +61,27 @@ > disable-wp; > }; > > +&pinctrl_0 { > + srom_ctl: srom-ctl { > + samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5", > + "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3"; > + samsung,pin-function = <2>; > + samsung,pin-drv = <0>; > + }; > + > + srom_ebi: srom-ebi { > + samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3", > + "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7", > + "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3", > + "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7", > + "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3", > + "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <3>; > + samsung,pin-drv = <0>; > + }; > +}; > + > &uart0 { > status = "okay"; > }; > @@ -72,3 +93,23 @@ > &uart2 { > status = "okay"; > }; > + > +&sromc { > + pinctrl-names = "default"; > + pinctrl-0 = <&srom_ctl>, <&srom_ebi>; > + > + ethernet@07000000 { > + compatible = "smsc,lan9115"; > + reg = <0x07000000 0x10000>; > + phy-mode = "mii"; > + interrupt-parent = <&gpx0>; > + interrupts = <5 8>; > + reg-io-width = <2>; > + smsc,irq-push-pull; > + smsc,force-internal-phy; > + > + samsung,srom-bank = <3>; > + samsung,srom-data-width = <2>; > + samsung,srom-timing = <1 9 12 1 9 1 1>; I think this is not correct. We can't change binding of "smsc,lan9115" which is already documented here [1]. These samsung specific srom properties should be in srom node or its subnode, but not in this way. [1]: Documentation/devicetree/bindings/net/smsc911x.txt Thanks, Pankaj Dubey > + }; > +}; > -- > 2.4.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index cebeaab..311e7be 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -61,6 +61,27 @@ disable-wp; }; +&pinctrl_0 { + srom_ctl: srom-ctl { + samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5", + "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3"; + samsung,pin-function = <2>; + samsung,pin-drv = <0>; + }; + + srom_ebi: srom-ebi { + samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3", + "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7", + "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3", + "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7", + "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3", + "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + &uart0 { status = "okay"; }; @@ -72,3 +93,23 @@ &uart2 { status = "okay"; }; + +&sromc { + pinctrl-names = "default"; + pinctrl-0 = <&srom_ctl>, <&srom_ebi>; + + ethernet@07000000 { + compatible = "smsc,lan9115"; + reg = <0x07000000 0x10000>; + phy-mode = "mii"; + interrupt-parent = <&gpx0>; + interrupts = <5 8>; + reg-io-width = <2>; + smsc,irq-push-pull; + smsc,force-internal-phy; + + samsung,srom-bank = <3>; + samsung,srom-data-width = <2>; + samsung,srom-timing = <1 9 12 1 9 1 1>; + }; +};
The chip is smsc9115, connected via SROMc bank 3. Additionally, some GPIO initialization is required. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> --- arch/arm/boot/dts/exynos5410-smdk5410.dts | 41 +++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+)