[V2,00/19] megaraid_sas: Driver updates

Message

Shivasharan S Oct. 17, 2018, 6:37 a.m. UTC

Changes in V2:
- Rebased the entire series on top of below patches -
  "scsi: megaraid_sas: fix a missing-check bug"
  "megaraid_sas: switch to generic DMA API"
- Patch 2/19: Replace PCI DMA APIs with generic DMA APIs.

Shivasharan S (19):
  megaraid_sas: Add watchdog thread to detect Firmware fault
  megaraid_sas: Add support for FW snap dump
  megaraid_sas: Fix msleep granularity
  megaraid_sas: Add check for reset adapter bit
  megaraid_sas: Update copyright information
  megaraid_sas: Fix goto labels in error handling
  megaraid_sas: Fix module parameter description
  megaraid_sas: Fix combined reply queue mode detection
  megaraid_sas: For SRIOV, do not set STOP_ADP bit
  megaraid_sas: Fail init if heartbeat timer fails
  megaraid_sas: optimize raid context access in IO path
  megaraid_sas: Remove spin lock for dpc operation
  megaraid_sas: Rename scratch_pad registers
  megaraid_sas: Re-use max_mfi_cmds to calculate queue sizes
  megaraid_sas: Remove double endian conversion
  megaraid_sas: increase timeout for IOC INIT to 180seconds
  megaraid_sas: remove unused macro
  megaraid_sas: modify max supported lds related print
  megaraid_sas: Update driver version

 drivers/scsi/megaraid/megaraid_sas.h        |  65 +++--
 drivers/scsi/megaraid/megaraid_sas_base.c   | 298 ++++++++++++++++-----
 drivers/scsi/megaraid/megaraid_sas_fp.c     |  14 +-
 drivers/scsi/megaraid/megaraid_sas_fusion.c | 384 ++++++++++++++++++----------
 drivers/scsi/megaraid/megaraid_sas_fusion.h |  26 +-
 5 files changed, 546 insertions(+), 241 deletions(-)

Comments

Shivasharan S Nov. 6, 2018, 11:19 a.m. UTC | #1

Hi Martin,

> Changes in V2:
> - Rebased the entire series on top of below patches -
>   "scsi: megaraid_sas: fix a missing-check bug"
>   "megaraid_sas: switch to generic DMA API"
> - Patch 2/19: Replace PCI DMA APIs with generic DMA APIs.
>
> Shivasharan S (19):
>   megaraid_sas: Add watchdog thread to detect Firmware fault
>   megaraid_sas: Add support for FW snap dump
>   megaraid_sas: Fix msleep granularity
>   megaraid_sas: Add check for reset adapter bit
>   megaraid_sas: Update copyright information
>   megaraid_sas: Fix goto labels in error handling
>   megaraid_sas: Fix module parameter description
>   megaraid_sas: Fix combined reply queue mode detection
>   megaraid_sas: For SRIOV, do not set STOP_ADP bit
>   megaraid_sas: Fail init if heartbeat timer fails
>   megaraid_sas: optimize raid context access in IO path
>   megaraid_sas: Remove spin lock for dpc operation
>   megaraid_sas: Rename scratch_pad registers
>   megaraid_sas: Re-use max_mfi_cmds to calculate queue sizes
>   megaraid_sas: Remove double endian conversion
>   megaraid_sas: increase timeout for IOC INIT to 180seconds
>   megaraid_sas: remove unused macro
>   megaraid_sas: modify max supported lds related print
>   megaraid_sas: Update driver version
>
>  drivers/scsi/megaraid/megaraid_sas.h        |  65 +++--
>  drivers/scsi/megaraid/megaraid_sas_base.c   | 298 ++++++++++++++++-----
>  drivers/scsi/megaraid/megaraid_sas_fp.c     |  14 +-
>  drivers/scsi/megaraid/megaraid_sas_fusion.c | 384
++++++++++++++++++----
> ------  drivers/scsi/megaraid/megaraid_sas_fusion.h |  26 +-
>  5 files changed, 546 insertions(+), 241 deletions(-)
>
> --
> 2.16.1

Can you please let us know if above patch series is good to be picked for
the next kernel version?

Thanks,
Shivasharan

Martin K. Petersen Nov. 7, 2018, 1:45 a.m. UTC | #2

Shivasharan,

> Can you please let us know if above patch series is good to be picked
> for the next kernel version?

The submission window for 4.21 just opened yesterday (You were too late
for 4.20).

I applied the series to 4.21/scsi-queue.

Thanks!