diff mbox

scsi: Avoid potential infinite eh_timeout_handler() loop

Message ID 1433443222-8260-1-git-send-email-rajatja@google.com (mailing list archive)
State New, archived
Headers show

Commit Message

Rajat Jain June 4, 2015, 6:40 p.m. UTC
Each cmd timeout should result in scmd->retries++. Currently it happens
just only before a command is requeued back. However, if the LLD
eh_timed_out() handler asks to reset timer back again, then also it should
be incremented because effectively LLD will be given a full time period
(SD_TIMEOUT = 30 secs!) to attempt to complete the command.

Why this is a problem:

  => Currently the SCSI low level transport drivers can provide
     eh_timeout_handler() calls (for e.g. iscsi provides this) to deal
     with command timeouts.

  => The eh_timeout_handler() can return BLK_EH_RESET_TIMER that causes the
     SCSI / block layer to reset the timer, thus giving more time to the
     LLD.

  => Currently a LLD can potentially loop infinitely on a command if it
     always keeps on returning BLK_EH_RESET_TIMER.

* => Other than choking its own devices, if the command that is stuck is a
     command issued during sd_probe_async() (e.g. a partition table scan),
     then it impacts all the disks because no other disks can be removed
     from the system until sd_probe_async() returns. (sd_remove waits on
     async_synchronize_full_domain(...))

  => This problem actually resulted in the situation mentioned above,
     whereby no disks in the system (on other scsi hosts) could be removed,
     because of a stuck scsi command to read the partition tables of an
     unrelated problematic disk during probe. The threads were stuck at:

	 schedule+0x312/0x7a0
	 async_synchronize_cookie_domain+0xb8/0x115
	 ? __wake_up_bit+0x40/0x40
	 async_synchronize_full_domain+0x15/0x17
	 sd_remove+0x5f/0x135
	 __device_release_driver+0x8a/0xe0
	 device_release_driver+0x23/0x30
	 bus_remove_device+0x10f/0x123
	 device_del+0x132/0x18e
	 __scsi_remove_device+0x56/0xb6
	 scsi_remove_device+0x26/0x33
	 scsi_remove_target+0x12d/0x1a0
	 ...

What this patch does:
  => Ensure that any quests to reset the timer are accounted for, so that
     there is a finite upper bound on the time that a command is tried.
     Once allowed number of retries is reached, we proceed to standard
     error handling procedure (abort etc.) by scheduling the command
     for EH.

Signed-off-by: Rajat Jain <rajatja@google.com>
---
 drivers/scsi/scsi_error.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

Comments

James Bottomley June 4, 2015, 8:27 p.m. UTC | #1
On Thu, 2015-06-04 at 11:40 -0700, Rajat Jain wrote:
> Each cmd timeout should result in scmd->retries++. Currently it happens
> just only before a command is requeued back. However, if the LLD
> eh_timed_out() handler asks to reset timer back again, then also it should
> be incremented because effectively LLD will be given a full time period
> (SD_TIMEOUT = 30 secs!) to attempt to complete the command.
> 
> Why this is a problem:
> 
>   => Currently the SCSI low level transport drivers can provide
>      eh_timeout_handler() calls (for e.g. iscsi provides this) to deal
>      with command timeouts.
> 
>   => The eh_timeout_handler() can return BLK_EH_RESET_TIMER that causes the
>      SCSI / block layer to reset the timer, thus giving more time to the
>      LLD.
> 
>   => Currently a LLD can potentially loop infinitely on a command if it
>      always keeps on returning BLK_EH_RESET_TIMER.
> 
> * => Other than choking its own devices, if the command that is stuck is a
>      command issued during sd_probe_async() (e.g. a partition table scan),
>      then it impacts all the disks because no other disks can be removed
>      from the system until sd_probe_async() returns. (sd_remove waits on
>      async_synchronize_full_domain(...))
> 
>   => This problem actually resulted in the situation mentioned above,
>      whereby no disks in the system (on other scsi hosts) could be removed,
>      because of a stuck scsi command to read the partition tables of an
>      unrelated problematic disk during probe. The threads were stuck at:
> 
> 	 schedule+0x312/0x7a0
> 	 async_synchronize_cookie_domain+0xb8/0x115
> 	 ? __wake_up_bit+0x40/0x40
> 	 async_synchronize_full_domain+0x15/0x17
> 	 sd_remove+0x5f/0x135
> 	 __device_release_driver+0x8a/0xe0
> 	 device_release_driver+0x23/0x30
> 	 bus_remove_device+0x10f/0x123
> 	 device_del+0x132/0x18e
> 	 __scsi_remove_device+0x56/0xb6
> 	 scsi_remove_device+0x26/0x33
> 	 scsi_remove_target+0x12d/0x1a0
> 	 ...
> 
> What this patch does:
>   => Ensure that any quests to reset the timer are accounted for, so that
>      there is a finite upper bound on the time that a command is tried.
>      Once allowed number of retries is reached, we proceed to standard
>      error handling procedure (abort etc.) by scheduling the command
>      for EH.
> 
> Signed-off-by: Rajat Jain <rajatja@google.com>

This is actually wrong.  Originally the code you're suggesting did exist
and it used to cause us to time out far too early on some conditions.
Now scmd->retries is for specific things that shouldn't be retried too
often.  Anything else appears to retry forever but in fact there's a
specific check (in the softirq  and io_completion) to check that a
retryable failure hasn't taken longer than  (cmd->allowed + 1) *
req->timeout.

This means effectively that nothing in SCSI is allowed to retry forever.

James


--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Rajat Jain June 4, 2015, 9:49 p.m. UTC | #2
Hello James,

On Thu, Jun 4, 2015 at 1:27 PM, James Bottomley
<James.Bottomley@hansenpartnership.com> wrote:
> On Thu, 2015-06-04 at 11:40 -0700, Rajat Jain wrote:
>> Each cmd timeout should result in scmd->retries++. Currently it happens
>> just only before a command is requeued back. However, if the LLD
>> eh_timed_out() handler asks to reset timer back again, then also it should
>> be incremented because effectively LLD will be given a full time period
>> (SD_TIMEOUT = 30 secs!) to attempt to complete the command.
>>
>> Why this is a problem:
>>
>>   => Currently the SCSI low level transport drivers can provide
>>      eh_timeout_handler() calls (for e.g. iscsi provides this) to deal
>>      with command timeouts.
>>
>>   => The eh_timeout_handler() can return BLK_EH_RESET_TIMER that causes the
>>      SCSI / block layer to reset the timer, thus giving more time to the
>>      LLD.
>>
>>   => Currently a LLD can potentially loop infinitely on a command if it
>>      always keeps on returning BLK_EH_RESET_TIMER.
>>
>> * => Other than choking its own devices, if the command that is stuck is a
>>      command issued during sd_probe_async() (e.g. a partition table scan),
>>      then it impacts all the disks because no other disks can be removed
>>      from the system until sd_probe_async() returns. (sd_remove waits on
>>      async_synchronize_full_domain(...))
>>
>>   => This problem actually resulted in the situation mentioned above,
>>      whereby no disks in the system (on other scsi hosts) could be removed,
>>      because of a stuck scsi command to read the partition tables of an
>>      unrelated problematic disk during probe. The threads were stuck at:
>>
>>        schedule+0x312/0x7a0
>>        async_synchronize_cookie_domain+0xb8/0x115
>>        ? __wake_up_bit+0x40/0x40
>>        async_synchronize_full_domain+0x15/0x17
>>        sd_remove+0x5f/0x135
>>        __device_release_driver+0x8a/0xe0
>>        device_release_driver+0x23/0x30
>>        bus_remove_device+0x10f/0x123
>>        device_del+0x132/0x18e
>>        __scsi_remove_device+0x56/0xb6
>>        scsi_remove_device+0x26/0x33
>>        scsi_remove_target+0x12d/0x1a0
>>        ...
>>
>> What this patch does:
>>   => Ensure that any quests to reset the timer are accounted for, so that
>>      there is a finite upper bound on the time that a command is tried.
>>      Once allowed number of retries is reached, we proceed to standard
>>      error handling procedure (abort etc.) by scheduling the command
>>      for EH.
>>
>> Signed-off-by: Rajat Jain <rajatja@google.com>
>
> This is actually wrong.  Originally the code you're suggesting did exist
> and it used to cause us to time out far too early on some conditions.
> Now scmd->retries is for specific things that shouldn't be retried too
> often.  Anything else appears to retry forever but in fact there's a
> specific check (in the softirq  and io_completion) to check that a
> retryable failure hasn't taken longer than  (cmd->allowed + 1) *
> req->timeout.
>
> This means effectively that nothing in SCSI is allowed to retry forever.

Thanks for the review. I'm not sure if I understood completely though.
I see the check you mention in softirq_done and in the
scsi_io_completion, however, I'm not sure if I see that in the
situation I mentioned above (eh_timed_out() always returning returning
BLK_EH_RESET_TIMER), how would the command ever end up in softirq_done
or io_completion (instead of going on infinitely)?

In my experiment, I actually instrumented the SCSI LLD to always ask
for more time (BLK_EH_RESET_TIMER) for 1 of the disks, and I actually
ended up with a system where I couldn't remove ANY of the disks in the
system (for the reasons mentioned in the commit log sd_remove()
waiting infinitely). I'm sure I'm missing something, but I'd
appreciate if you could please help me understand?

Thanks,

Rajat
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index c95a4e9..9671ec5 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -283,6 +283,17 @@  enum blk_eh_timer_return scsi_times_out(struct request *req)
 	else if (host->hostt->eh_timed_out)
 		rtn = host->hostt->eh_timed_out(scmd);
 
+	/*
+	 * If a scmd times out because LLD failed to complete it, make sure that
+	 * LLD can ask for more time only finite number of times. Also each such
+	 * request must account towards the time the LLD has been spent on that
+	 * cmd. Thus each timeout attempt by an LLD to complete a scmd must be
+	 * treated as a retry since it involves waiting for another whole period
+	 * of time before it times out again.
+	 */
+	if (rtn == BLK_EH_RESET_TIMER && (++scmd->retries > scmd->allowed))
+		rtn = BLK_EH_NOT_HANDLED;
+
 	if (rtn == BLK_EH_NOT_HANDLED) {
 		if (!host->hostt->no_async_abort &&
 		    scsi_abort_command(scmd) == SUCCESS)