From patchwork Tue Jul 14 20:00:42 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Himanshu Madhani X-Patchwork-Id: 6789151 Return-Path: X-Original-To: patchwork-linux-scsi@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork1.web.kernel.org (Postfix) with ESMTP id 615CF9F2E8 for ; Tue, 14 Jul 2015 20:45:54 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id DFDC920588 for ; Tue, 14 Jul 2015 20:45:52 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 55C4C2056C for ; Tue, 14 Jul 2015 20:45:51 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753570AbbGNUpu (ORCPT ); Tue, 14 Jul 2015 16:45:50 -0400 Received: from mx0a-0016ce01.pphosted.com ([67.231.148.157]:30138 "EHLO mx0a-0016ce01.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753206AbbGNUps (ORCPT ); Tue, 14 Jul 2015 16:45:48 -0400 Received: from pps.filterd (m0045602.ppops.net [127.0.0.1]) by mx0a-0016ce01.pphosted.com (8.15.0.59/8.15.0.59) with SMTP id t6EKhY4A015736; Tue, 14 Jul 2015 13:45:39 -0700 Received: from avcashub1.qlogic.com (avcashub1.qlogic.com [198.70.193.115]) by mx0a-0016ce01.pphosted.com with ESMTP id 1vk29vm8ay-1 (version=TLSv1/SSLv3 cipher=AES128-SHA bits=128 verify=NOT); Tue, 14 Jul 2015 13:45:39 -0700 Received: from dut6217.mv.qlogic.com (172.29.56.217) by qlc.com (10.1.4.190) with Microsoft SMTP Server id 14.3.235.1; Tue, 14 Jul 2015 13:45:38 -0700 Received: by dut6217.mv.qlogic.com (Postfix, from userid 0) id 749DE521F65; Tue, 14 Jul 2015 16:00:49 -0400 (EDT) From: Himanshu Madhani To: CC: , , , , , Subject: [PATCH v2 1/8] qla2xxx: kill sessions/log out initiator on RSCN and port down events Date: Tue, 14 Jul 2015 16:00:42 -0400 Message-ID: <1436904049-27707-2-git-send-email-himanshu.madhani@qlogic.com> X-Mailer: git-send-email 1.7.7 In-Reply-To: <1436904049-27707-1-git-send-email-himanshu.madhani@qlogic.com> References: <1436904049-27707-1-git-send-email-himanshu.madhani@qlogic.com> MIME-Version: 1.0 disclaimer: bypass X-Proofpoint-Virus-Version: vendor=nai engine=5700 definitions=7862 signatures=670606 X-Proofpoint-Spam-Details: rule=notspam policy=default score=0 spamscore=0 suspectscore=1 malwarescore=0 phishscore=0 adultscore=0 bulkscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-1506180000 definitions=main-1507140296 Sender: linux-scsi-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-scsi@vger.kernel.org X-Spam-Status: No, score=-8.3 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=ham version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP From: Roland Dreier To fix some issues talking to ESX, this patch modifies the qla2xxx driver so that it never logs into remote ports. This has the side effect of getting rid of the "rports" entirely, which means we never log out of initiators and never tear down sessions when an initiator goes away. This is mostly OK, except that we can run into trouble if we have initiator A assigned FC address X:Y:Z by the fabric talking to us, and then initiator A goes away. Some time (could be a long time) later, initiator B comes along and also gets FC address X:Y:Z (which is available again, because initiator A is gone). If initiator B starts talking to us, then we'll still have the session for initiator A, and since we look up incoming IO based on the FC address X:Y:Z, initiator B will end up using ACLs for initiator A. Fix this by: 1. Handling RSCN events somewhat differently; instead of completely skipping the processing of fcports, we look through the list, and if an fcport disappears, we tell the target code the tear down the session and tell the HBA FW to release the N_Port handle. 2. Handling "port down" events by flushing all of our sessions. The firmware was already releasing the N_Port handle but we want the target code to drop all the sessions too. Cc: Signed-off-by: Roland Dreier Signed-off-by: Alexei Potashnik Acked-by: Quinn Tran Signed-off-by: Himanshu Madhani Reviewed-by: Hannes Reinecke --- drivers/scsi/qla2xxx/qla_dbg.c | 2 +- drivers/scsi/qla2xxx/qla_init.c | 137 ++++++++++++++++++++++++++++++------- drivers/scsi/qla2xxx/qla_target.c | 9 ++- 3 files changed, 117 insertions(+), 31 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 0e6ee3c..e9ae6b9 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -68,7 +68,7 @@ * | | | 0xd101-0xd1fe | * | | | 0xd214-0xd2fe | * | Target Mode | 0xe079 | | - * | Target Mode Management | 0xf072 | 0xf002 | + * | Target Mode Management | 0xf080 | 0xf002 | * | | | 0xf046-0xf049 | * | Target Mode Task Management | 0x1000b | | * ---------------------------------------------------------------------- diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 766fdfc..4895a4a 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -3462,20 +3462,43 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha) if ((fcport->flags & FCF_FABRIC_DEVICE) == 0) continue; - if (fcport->scan_state == QLA_FCPORT_SCAN && - atomic_read(&fcport->state) == FCS_ONLINE) { - qla2x00_mark_device_lost(vha, fcport, - ql2xplogiabsentdevice, 0); - if (fcport->loop_id != FC_NO_LOOP_ID && - (fcport->flags & FCF_FCP2_DEVICE) == 0 && - fcport->port_type != FCT_INITIATOR && - fcport->port_type != FCT_BROADCAST) { - ha->isp_ops->fabric_logout(vha, - fcport->loop_id, - fcport->d_id.b.domain, - fcport->d_id.b.area, - fcport->d_id.b.al_pa); - qla2x00_clear_loop_id(fcport); + if (fcport->scan_state == QLA_FCPORT_SCAN) { + if (qla_ini_mode_enabled(base_vha) && + atomic_read(&fcport->state) == FCS_ONLINE) { + qla2x00_mark_device_lost(vha, fcport, + ql2xplogiabsentdevice, 0); + if (fcport->loop_id != FC_NO_LOOP_ID && + (fcport->flags & FCF_FCP2_DEVICE) == 0 && + fcport->port_type != FCT_INITIATOR && + fcport->port_type != FCT_BROADCAST) { + ha->isp_ops->fabric_logout(vha, + fcport->loop_id, + fcport->d_id.b.domain, + fcport->d_id.b.area, + fcport->d_id.b.al_pa); + qla2x00_clear_loop_id(fcport); + } + } else if (!qla_ini_mode_enabled(base_vha)) { + /* + * In target mode, explicitly kill + * sessions and log out of devices + * that are gone, so that we don't + * end up with an initiator using the + * wrong ACL (if the fabric recycles + * an FC address and we have a stale + * session around) and so that we don't + * report initiators that are no longer + * on the fabric. + */ + ql_dbg(ql_dbg_tgt_mgt, vha, 0xf077, + "port gone, logging out/killing session: " + "%8phC state 0x%x flags 0x%x fc4_type 0x%x " + "scan_state %d\n", + fcport->port_name, + atomic_read(&fcport->state), + fcport->flags, fcport->fc4_type, + fcport->scan_state); + qlt_fc_port_deleted(vha, fcport); } } } @@ -3496,6 +3519,28 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha) (fcport->flags & FCF_LOGIN_NEEDED) == 0) continue; + /* + * If we're not an initiator, skip looking for devices + * and logging in. There's no reason for us to do it, + * and it seems to actively cause problems in target + * mode if we race with the initiator logging into us + * (we might get the "port ID used" status back from + * our login command and log out the initiator, which + * seems to cause havoc). + */ + if (!qla_ini_mode_enabled(base_vha)) { + if (fcport->scan_state == QLA_FCPORT_FOUND) { + ql_dbg(ql_dbg_tgt_mgt, vha, 0xf078, + "port %8phC state 0x%x flags 0x%x fc4_type 0x%x " + "scan_state %d (initiator mode disabled; skipping " + "login)\n", fcport->port_name, + atomic_read(&fcport->state), + fcport->flags, fcport->fc4_type, + fcport->scan_state); + } + continue; + } + if (fcport->loop_id == FC_NO_LOOP_ID) { fcport->loop_id = next_loopid; rval = qla2x00_find_new_loop_id( @@ -3522,16 +3567,38 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha) test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) break; - /* Find a new loop ID to use. */ - fcport->loop_id = next_loopid; - rval = qla2x00_find_new_loop_id(base_vha, fcport); - if (rval != QLA_SUCCESS) { - /* Ran out of IDs to use */ - break; - } + /* + * If we're not an initiator, skip looking for devices + * and logging in. There's no reason for us to do it, + * and it seems to actively cause problems in target + * mode if we race with the initiator logging into us + * (we might get the "port ID used" status back from + * our login command and log out the initiator, which + * seems to cause havoc). + */ + if (qla_ini_mode_enabled(base_vha)) { + /* Find a new loop ID to use. */ + fcport->loop_id = next_loopid; + rval = qla2x00_find_new_loop_id(base_vha, + fcport); + if (rval != QLA_SUCCESS) { + /* Ran out of IDs to use */ + break; + } - /* Login and update database */ - qla2x00_fabric_dev_login(vha, fcport, &next_loopid); + /* Login and update database */ + qla2x00_fabric_dev_login(vha, fcport, + &next_loopid); + } else { + ql_dbg(ql_dbg_tgt_mgt, vha, 0xf079, + "new port %8phC state 0x%x flags 0x%x fc4_type " + "0x%x scan_state %d (initiator mode disabled; " + "skipping login)\n", + fcport->port_name, + atomic_read(&fcport->state), + fcport->flags, fcport->fc4_type, + fcport->scan_state); + } list_move_tail(&fcport->list, &vha->vp_fcports); } @@ -3727,11 +3794,12 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha, fcport->fp_speed = new_fcport->fp_speed; /* - * If address the same and state FCS_ONLINE, nothing - * changed. + * If address the same and state FCS_ONLINE + * (or in target mode), nothing changed. */ if (fcport->d_id.b24 == new_fcport->d_id.b24 && - atomic_read(&fcport->state) == FCS_ONLINE) { + (atomic_read(&fcport->state) == FCS_ONLINE || + !qla_ini_mode_enabled(base_vha))) { break; } @@ -3751,6 +3819,22 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha, * Log it out if still logged in and mark it for * relogin later. */ + if (!qla_ini_mode_enabled(base_vha)) { + ql_dbg(ql_dbg_tgt_mgt, vha, 0xf080, + "port changed FC ID, %8phC" + " old %x:%x:%x (loop_id 0x%04x)-> new %x:%x:%x\n", + fcport->port_name, + fcport->d_id.b.domain, + fcport->d_id.b.area, + fcport->d_id.b.al_pa, + fcport->loop_id, + new_fcport->d_id.b.domain, + new_fcport->d_id.b.area, + new_fcport->d_id.b.al_pa); + fcport->d_id.b24 = new_fcport->d_id.b24; + break; + } + fcport->d_id.b24 = new_fcport->d_id.b24; fcport->flags |= FCF_LOGIN_NEEDED; if (fcport->loop_id != FC_NO_LOOP_ID && @@ -3770,6 +3854,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha, if (found) continue; /* If device was not in our fcports list, then add it. */ + new_fcport->scan_state = QLA_FCPORT_FOUND; list_add_tail(&new_fcport->list, new_fcports); /* Allocate a new replacement fcport. */ diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 52d8f10..97b42c0 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -113,6 +113,7 @@ static void qlt_abort_cmd_on_host_reset(struct scsi_qla_host *vha, static void qlt_alloc_qfull_cmd(struct scsi_qla_host *vha, struct atio_from_isp *atio, uint16_t status, int qfull); static void qlt_disable_vha(struct scsi_qla_host *vha); +static void qlt_clear_tgt_db(struct qla_tgt *tgt); /* * Global Variables */ @@ -431,10 +432,10 @@ static int qlt_reset(struct scsi_qla_host *vha, void *iocb, int mcmd) loop_id = le16_to_cpu(n->u.isp24.nport_handle); if (loop_id == 0xFFFF) { -#if 0 /* FIXME: Re-enable Global event handling.. */ /* Global event */ - atomic_inc(&ha->tgt.qla_tgt->tgt_global_resets_count); - qlt_clear_tgt_db(ha->tgt.qla_tgt); + atomic_inc(&vha->vha_tgt.qla_tgt->tgt_global_resets_count); + qlt_clear_tgt_db(vha->vha_tgt.qla_tgt); +#if 0 /* FIXME: do we need to choose a session here? */ if (!list_empty(&ha->tgt.qla_tgt->sess_list)) { sess = list_entry(ha->tgt.qla_tgt->sess_list.next, typeof(*sess), sess_list_entry); @@ -788,7 +789,7 @@ void qlt_fc_port_deleted(struct scsi_qla_host *vha, fc_port_t *fcport) if (!vha->hw->tgt.tgt_ops) return; - if (!tgt || (fcport->port_type != FCT_INITIATOR)) + if (!tgt) return; if (tgt->tgt_stop) {