deleted file mode 100644
@@ -1,338 +0,0 @@
-/*
- * Scsi Host Layer for MPT (Message Passing Technology) based controllers
- *
- * Copyright (C) 2012-2014 LSI Corporation
- * Copyright (C) 2013-2015 Avago Technologies
- * (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program.
- */
-
-/**
- * _scsih_disable_ddio - Disable direct I/O for all the volumes
- * @ioc: per adapter object
- */
-static void
-_scsih_disable_ddio(struct MPT3SAS_ADAPTER *ioc)
-{
- Mpi2RaidVolPage1_t vol_pg1;
- Mpi2ConfigReply_t mpi_reply;
- struct _raid_device *raid_device;
- u16 handle;
- u16 ioc_status;
- unsigned long flags;
-
- handle = 0xFFFF;
- while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
- &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
- break;
- handle = le16_to_cpu(vol_pg1.DevHandle);
- spin_lock_irqsave(&ioc->raid_device_lock, flags);
- raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
- if (raid_device)
- raid_device->direct_io_enabled = 0;
- spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
- }
- return;
-}
-
-
-/**
- * _scsih_get_num_volumes - Get number of volumes in the ioc
- * @ioc: per adapter object
- */
-static u8
-_scsih_get_num_volumes(struct MPT3SAS_ADAPTER *ioc)
-{
- Mpi2RaidVolPage1_t vol_pg1;
- Mpi2ConfigReply_t mpi_reply;
- u16 handle;
- u8 vol_cnt = 0;
- u16 ioc_status;
-
- handle = 0xFFFF;
- while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
- &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
- break;
- vol_cnt++;
- handle = le16_to_cpu(vol_pg1.DevHandle);
- }
- return vol_cnt;
-}
-
-
-/**
- * _scsih_init_warpdrive_properties - Set properties for warpdrive direct I/O.
- * @ioc: per adapter object
- * @raid_device: the raid_device object
- */
-static void
-_scsih_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc,
- struct _raid_device *raid_device)
-{
- Mpi2RaidVolPage0_t *vol_pg0;
- Mpi2RaidPhysDiskPage0_t pd_pg0;
- Mpi2ConfigReply_t mpi_reply;
- u16 sz;
- u8 num_pds, count;
- unsigned long stripe_sz, block_sz;
- u8 stripe_exp, block_exp;
- u64 dev_max_lba;
-
- if (!ioc->is_warpdrive)
- return;
-
- if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_EXPOSE_ALL_DISKS) {
- pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
- "globally as drives are exposed\n", ioc->name);
- return;
- }
- if (_scsih_get_num_volumes(ioc) > 1) {
- _scsih_disable_ddio(ioc);
- pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
- "globally as number of drives > 1\n", ioc->name);
- return;
- }
- if ((mpt3sas_config_get_number_pds(ioc, raid_device->handle,
- &num_pds)) || !num_pds) {
- pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
- "Failure in computing number of drives\n", ioc->name);
- return;
- }
-
- sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
- sizeof(Mpi2RaidVol0PhysDisk_t));
- vol_pg0 = kzalloc(sz, GFP_KERNEL);
- if (!vol_pg0) {
- pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
- "Memory allocation failure for RVPG0\n", ioc->name);
- return;
- }
-
- if ((mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
- MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
- pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
- "Failure in retrieving RVPG0\n", ioc->name);
- kfree(vol_pg0);
- return;
- }
-
- /*
- * WARPDRIVE:If number of physical disks in a volume exceeds the max pds
- * assumed for WARPDRIVE, disable direct I/O
- */
- if (num_pds > MPT_MAX_WARPDRIVE_PDS) {
- pr_warn(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
- "for the drive with handle(0x%04x): num_mem=%d, "
- "max_mem_allowed=%d\n", ioc->name, raid_device->handle,
- num_pds, MPT_MAX_WARPDRIVE_PDS);
- kfree(vol_pg0);
- return;
- }
- for (count = 0; count < num_pds; count++) {
- if (mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
- &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
- vol_pg0->PhysDisk[count].PhysDiskNum) ||
- pd_pg0.DevHandle == MPT3SAS_INVALID_DEVICE_HANDLE) {
- pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is "
- "disabled for the drive with handle(0x%04x) member"
- "handle retrieval failed for member number=%d\n",
- ioc->name, raid_device->handle,
- vol_pg0->PhysDisk[count].PhysDiskNum);
- goto out_error;
- }
- /* Disable direct I/O if member drive lba exceeds 4 bytes */
- dev_max_lba = le64_to_cpu(pd_pg0.DeviceMaxLBA);
- if (dev_max_lba >> 32) {
- pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is "
- "disabled for the drive with handle(0x%04x) member"
- " handle (0x%04x) unsupported max lba 0x%016llx\n",
- ioc->name, raid_device->handle,
- le16_to_cpu(pd_pg0.DevHandle),
- (unsigned long long)dev_max_lba);
- goto out_error;
- }
-
- raid_device->pd_handle[count] = le16_to_cpu(pd_pg0.DevHandle);
- }
-
- /*
- * Assumption for WD: Direct I/O is not supported if the volume is
- * not RAID0
- */
- if (raid_device->volume_type != MPI2_RAID_VOL_TYPE_RAID0) {
- pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
- "for the drive with handle(0x%04x): type=%d, "
- "s_sz=%uK, blk_size=%u\n", ioc->name,
- raid_device->handle, raid_device->volume_type,
- (le32_to_cpu(vol_pg0->StripeSize) *
- le16_to_cpu(vol_pg0->BlockSize)) / 1024,
- le16_to_cpu(vol_pg0->BlockSize));
- goto out_error;
- }
-
- stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
- stripe_exp = find_first_bit(&stripe_sz, 32);
- if (stripe_exp == 32) {
- pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
- "for the drive with handle(0x%04x) invalid stripe sz %uK\n",
- ioc->name, raid_device->handle,
- (le32_to_cpu(vol_pg0->StripeSize) *
- le16_to_cpu(vol_pg0->BlockSize)) / 1024);
- goto out_error;
- }
- raid_device->stripe_exponent = stripe_exp;
- block_sz = le16_to_cpu(vol_pg0->BlockSize);
- block_exp = find_first_bit(&block_sz, 16);
- if (block_exp == 16) {
- pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
- "for the drive with handle(0x%04x) invalid block sz %u\n",
- ioc->name, raid_device->handle,
- le16_to_cpu(vol_pg0->BlockSize));
- goto out_error;
- }
- raid_device->block_exponent = block_exp;
- raid_device->direct_io_enabled = 1;
-
- pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is Enabled for the drive"
- " with handle(0x%04x)\n", ioc->name, raid_device->handle);
- /*
- * WARPDRIVE: Though the following fields are not used for direct IO,
- * stored for future purpose:
- */
- raid_device->max_lba = le64_to_cpu(vol_pg0->MaxLBA);
- raid_device->stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
- raid_device->block_sz = le16_to_cpu(vol_pg0->BlockSize);
-
-
- kfree(vol_pg0);
- return;
-
-out_error:
- raid_device->direct_io_enabled = 0;
- for (count = 0; count < num_pds; count++)
- raid_device->pd_handle[count] = 0;
- kfree(vol_pg0);
- return;
-}
-
-/**
- * _scsih_scsi_direct_io_get - returns direct io flag
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Returns the smid stored scmd pointer.
- */
-static inline u8
-_scsih_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid)
-{
- return ioc->scsi_lookup[smid - 1].direct_io;
-}
-
-/**
- * _scsih_scsi_direct_io_set - sets direct io flag
- * @ioc: per adapter object
- * @smid: system request message index
- * @direct_io: Zero or non-zero value to set in the direct_io flag
- *
- * Returns Nothing.
- */
-static inline void
-_scsih_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io)
-{
- ioc->scsi_lookup[smid - 1].direct_io = direct_io;
-}
-
-/**
- * _scsih_setup_direct_io - setup MPI request for WARPDRIVE Direct I/O
- * @ioc: per adapter object
- * @scmd: pointer to scsi command object
- * @raid_device: pointer to raid device data structure
- * @mpi_request: pointer to the SCSI_IO reqest message frame
- * @smid: system request message index
- *
- * Returns nothing
- */
-static void
-_scsih_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
- struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
- u16 smid)
-{
- sector_t v_lba, p_lba, stripe_off, stripe_unit, column, io_size;
- u32 stripe_sz, stripe_exp;
- u8 num_pds, cmd = scmd->cmnd[0];
-
- if (cmd != READ_10 && cmd != WRITE_10 &&
- cmd != READ_16 && cmd != WRITE_16)
- return;
-
- if (cmd == READ_10 || cmd == WRITE_10)
- v_lba = get_unaligned_be32(&mpi_request->CDB.CDB32[2]);
- else
- v_lba = get_unaligned_be64(&mpi_request->CDB.CDB32[2]);
-
- io_size = scsi_bufflen(scmd) >> raid_device->block_exponent;
-
- if (v_lba + io_size - 1 > raid_device->max_lba)
- return;
-
- stripe_sz = raid_device->stripe_sz;
- stripe_exp = raid_device->stripe_exponent;
- stripe_off = v_lba & (stripe_sz - 1);
-
- /* Return unless IO falls within a stripe */
- if (stripe_off + io_size > stripe_sz)
- return;
-
- num_pds = raid_device->num_pds;
- p_lba = v_lba >> stripe_exp;
- stripe_unit = p_lba / num_pds;
- column = p_lba % num_pds;
- p_lba = (stripe_unit << stripe_exp) + stripe_off;
- mpi_request->DevHandle = cpu_to_le16(raid_device->pd_handle[column]);
-
- if (cmd == READ_10 || cmd == WRITE_10)
- put_unaligned_be32(lower_32_bits(p_lba),
- &mpi_request->CDB.CDB32[2]);
- else
- put_unaligned_be64(p_lba, &mpi_request->CDB.CDB32[2]);
-
- _scsih_scsi_direct_io_set(ioc, smid, 1);
-}
@@ -5,4 +5,5 @@ mpt3sas-y += mpt3sas_base.o \
mpt3sas_scsih.o \
mpt3sas_transport.o \
mpt3sas_ctl.o \
- mpt3sas_trigger_diag.o
+ mpt3sas_trigger_diag.o \
+ mpt3sas_warpdrive.o
@@ -1270,6 +1270,8 @@ struct _sas_device *__mpt3sas_get_sdev_by_addr(
struct MPT3SAS_ADAPTER *ioc, u64 sas_address);
void mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc);
+struct _raid_device *
+mpt3sas_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle);
/* config shared API */
u8 mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
@@ -1403,4 +1405,18 @@ void mpt3sas_trigger_scsi(struct MPT3SAS_ADAPTER *ioc, u8 sense_key,
u8 asc, u8 ascq);
void mpt3sas_trigger_mpi(struct MPT3SAS_ADAPTER *ioc, u16 ioc_status,
u32 loginfo);
+
+/* warpdrive APIs */
+u8 mpt3sas_get_num_volumes(struct MPT3SAS_ADAPTER *ioc);
+void mpt3sas_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc,
+ struct _raid_device *raid_device);
+inline u8
+mpt3sas_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+inline void
+mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io);
+void
+mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
+ struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
+ u16 smid);
+
#endif /* MPT3SAS_BASE_H_INCLUDED */
@@ -71,20 +71,6 @@ static int _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle,
static u8 _scsih_check_for_pending_tm(struct MPT3SAS_ADAPTER *ioc, u16 smid);
-static void _scsih_disable_ddio(struct MPT3SAS_ADAPTER *ioc);
-static u8 _scsih_get_num_volumes(struct MPT3SAS_ADAPTER *ioc);
-static void
-_scsih_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc,
- struct _raid_device *raid_device);
-static inline u8
-_scsih_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid);
-static inline void
-_scsih_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io);
-static void
-_scsih_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
- struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
- u16 smid);
-
/* global parameters */
LIST_HEAD(mpt3sas_ioc_list);
/* global ioc lock for list operations */
@@ -884,7 +870,7 @@ _scsih_raid_device_find_by_id(struct MPT3SAS_ADAPTER *ioc, int id, int channel)
}
/**
- * _scsih_raid_device_find_by_handle - raid device search
+ * mpt3sas_raid_device_find_by_handle - raid device search
* @ioc: per adapter object
* @handle: sas device handle (assigned by firmware)
* Context: Calling function should acquire ioc->raid_device_lock
@@ -892,8 +878,8 @@ _scsih_raid_device_find_by_id(struct MPT3SAS_ADAPTER *ioc, int id, int channel)
* This searches for raid_device based on handle, then return raid_device
* object.
*/
-static struct _raid_device *
-_scsih_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
+struct _raid_device *
+mpt3sas_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
{
struct _raid_device *raid_device, *r;
@@ -1829,7 +1815,7 @@ scsih_slave_configure(struct scsi_device *sdev)
if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME) {
spin_lock_irqsave(&ioc->raid_device_lock, flags);
- raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+ raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
if (!raid_device) {
dfailprintk(ioc, pr_warn(MPT3SAS_FMT
@@ -1848,7 +1834,7 @@ scsih_slave_configure(struct scsi_device *sdev)
/*
* WARPDRIVE: Initialize the required data for Direct IO
*/
- _scsih_init_warpdrive_properties(ioc, raid_device);
+ mpt3sas_init_warpdrive_properties(ioc, raid_device);
/* RAID Queue Depth Support
* IS volume = underlying qdepth of drive type, either
@@ -3536,7 +3522,7 @@ _scsih_set_volume_delete_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle)
unsigned long flags;
spin_lock_irqsave(&ioc->raid_device_lock, flags);
- raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+ raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
if (raid_device && raid_device->starget &&
raid_device->starget->hostdata) {
sas_target_priv_data =
@@ -3960,7 +3946,7 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
raid_device = sas_target_priv_data->raid_device;
if (raid_device && raid_device->direct_io_enabled)
- _scsih_setup_direct_io(ioc, scmd, raid_device, mpi_request,
+ mpt3sas_setup_direct_io(ioc, scmd, raid_device, mpi_request,
smid);
if (likely(mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)) {
@@ -4455,13 +4441,13 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
* WARPDRIVE: If direct_io is set then it is directIO,
* the failed direct I/O should be redirected to volume
*/
- if (_scsih_scsi_direct_io_get(ioc, smid) &&
+ if (mpt3sas_scsi_direct_io_get(ioc, smid) &&
((ioc_status & MPI2_IOCSTATUS_MASK)
!= MPI2_IOCSTATUS_SCSI_TASK_TERMINATED)) {
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
ioc->scsi_lookup[smid - 1].scmd = scmd;
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
- _scsih_scsi_direct_io_set(ioc, smid, 0);
+ mpt3sas_scsi_direct_io_set(ioc, smid, 0);
memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
mpi_request->DevHandle =
cpu_to_le16(sas_device_priv_data->sas_target->handle);
@@ -6204,7 +6190,7 @@ _scsih_sas_volume_delete(struct MPT3SAS_ADAPTER *ioc, u16 handle)
struct scsi_target *starget = NULL;
spin_lock_irqsave(&ioc->raid_device_lock, flags);
- raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+ raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
if (raid_device) {
if (raid_device->starget) {
starget = raid_device->starget;
@@ -6582,7 +6568,7 @@ _scsih_sas_ir_volume_event(struct MPT3SAS_ADAPTER *ioc,
case MPI2_RAID_VOL_STATE_OPTIMAL:
spin_lock_irqsave(&ioc->raid_device_lock, flags);
- raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+ raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
if (raid_device)
@@ -6778,7 +6764,7 @@ _scsih_sas_ir_operation_status_event(struct MPT3SAS_ADAPTER *ioc,
spin_lock_irqsave(&ioc->raid_device_lock, flags);
handle = le16_to_cpu(event_data->VolDevHandle);
- raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+ raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
if (raid_device)
raid_device->percent_complete =
event_data->PercentComplete;
@@ -6965,7 +6951,7 @@ _scsih_mark_responding_raid_device(struct MPT3SAS_ADAPTER *ioc, u64 wwid,
* across the host reset so re-initialize the
* required data for Direct IO
*/
- _scsih_init_warpdrive_properties(ioc, raid_device);
+ mpt3sas_init_warpdrive_properties(ioc, raid_device);
spin_lock_irqsave(&ioc->raid_device_lock, flags);
if (raid_device->handle == handle) {
spin_unlock_irqrestore(&ioc->raid_device_lock,
@@ -8599,7 +8585,7 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
else if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_HIDE_ALL_DISKS)
ioc->hide_drives = 1;
else {
- if (_scsih_get_num_volumes(ioc))
+ if (mpt3sas_get_num_volumes(ioc))
ioc->hide_drives = 1;
else
ioc->hide_drives = 0;
@@ -9031,5 +9017,3 @@ _mpt3sas_exit(void)
module_init(_mpt3sas_init);
module_exit(_mpt3sas_exit);
-
-#include "mpt2sas_warpdrive.c"
new file mode 100644
@@ -0,0 +1,344 @@
+/*
+ * Scsi Host Layer for MPT (Message Passing Technology) based controllers
+ *
+ * Copyright (C) 2012-2014 LSI Corporation
+ * Copyright (C) 2013-2015 Avago Technologies
+ * (mailto: MPT-FusionLinux.pdl@avagotech.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <asm/unaligned.h>
+
+#include "mpt3sas_base.h"
+
+/**
+ * _warpdrive_disable_ddio - Disable direct I/O for all the volumes
+ * @ioc: per adapter object
+ */
+static void
+_warpdrive_disable_ddio(struct MPT3SAS_ADAPTER *ioc)
+{
+ Mpi2RaidVolPage1_t vol_pg1;
+ Mpi2ConfigReply_t mpi_reply;
+ struct _raid_device *raid_device;
+ u16 handle;
+ u16 ioc_status;
+ unsigned long flags;
+
+ handle = 0xFFFF;
+ while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+ &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ break;
+ handle = le16_to_cpu(vol_pg1.DevHandle);
+ spin_lock_irqsave(&ioc->raid_device_lock, flags);
+ raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
+ if (raid_device)
+ raid_device->direct_io_enabled = 0;
+ spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+ }
+ return;
+}
+
+
+/**
+ * mpt3sas_get_num_volumes - Get number of volumes in the ioc
+ * @ioc: per adapter object
+ */
+u8
+mpt3sas_get_num_volumes(struct MPT3SAS_ADAPTER *ioc)
+{
+ Mpi2RaidVolPage1_t vol_pg1;
+ Mpi2ConfigReply_t mpi_reply;
+ u16 handle;
+ u8 vol_cnt = 0;
+ u16 ioc_status;
+
+ handle = 0xFFFF;
+ while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+ &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+ break;
+ vol_cnt++;
+ handle = le16_to_cpu(vol_pg1.DevHandle);
+ }
+ return vol_cnt;
+}
+
+
+/**
+ * mpt3sas_init_warpdrive_properties - Set properties for warpdrive direct I/O.
+ * @ioc: per adapter object
+ * @raid_device: the raid_device object
+ */
+void
+mpt3sas_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc,
+ struct _raid_device *raid_device)
+{
+ Mpi2RaidVolPage0_t *vol_pg0;
+ Mpi2RaidPhysDiskPage0_t pd_pg0;
+ Mpi2ConfigReply_t mpi_reply;
+ u16 sz;
+ u8 num_pds, count;
+ unsigned long stripe_sz, block_sz;
+ u8 stripe_exp, block_exp;
+ u64 dev_max_lba;
+
+ if (!ioc->is_warpdrive)
+ return;
+
+ if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_EXPOSE_ALL_DISKS) {
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+ "globally as drives are exposed\n", ioc->name);
+ return;
+ }
+ if (mpt3sas_get_num_volumes(ioc) > 1) {
+ _warpdrive_disable_ddio(ioc);
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+ "globally as number of drives > 1\n", ioc->name);
+ return;
+ }
+ if ((mpt3sas_config_get_number_pds(ioc, raid_device->handle,
+ &num_pds)) || !num_pds) {
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+ "Failure in computing number of drives\n", ioc->name);
+ return;
+ }
+
+ sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
+ sizeof(Mpi2RaidVol0PhysDisk_t));
+ vol_pg0 = kzalloc(sz, GFP_KERNEL);
+ if (!vol_pg0) {
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+ "Memory allocation failure for RVPG0\n", ioc->name);
+ return;
+ }
+
+ if ((mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
+ MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+ "Failure in retrieving RVPG0\n", ioc->name);
+ kfree(vol_pg0);
+ return;
+ }
+
+ /*
+ * WARPDRIVE:If number of physical disks in a volume exceeds the max pds
+ * assumed for WARPDRIVE, disable direct I/O
+ */
+ if (num_pds > MPT_MAX_WARPDRIVE_PDS) {
+ pr_warn(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+ "for the drive with handle(0x%04x): num_mem=%d, "
+ "max_mem_allowed=%d\n", ioc->name, raid_device->handle,
+ num_pds, MPT_MAX_WARPDRIVE_PDS);
+ kfree(vol_pg0);
+ return;
+ }
+ for (count = 0; count < num_pds; count++) {
+ if (mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+ &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
+ vol_pg0->PhysDisk[count].PhysDiskNum) ||
+ pd_pg0.DevHandle == MPT3SAS_INVALID_DEVICE_HANDLE) {
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is "
+ "disabled for the drive with handle(0x%04x) member"
+ "handle retrieval failed for member number=%d\n",
+ ioc->name, raid_device->handle,
+ vol_pg0->PhysDisk[count].PhysDiskNum);
+ goto out_error;
+ }
+ /* Disable direct I/O if member drive lba exceeds 4 bytes */
+ dev_max_lba = le64_to_cpu(pd_pg0.DeviceMaxLBA);
+ if (dev_max_lba >> 32) {
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is "
+ "disabled for the drive with handle(0x%04x) member"
+ " handle (0x%04x) unsupported max lba 0x%016llx\n",
+ ioc->name, raid_device->handle,
+ le16_to_cpu(pd_pg0.DevHandle),
+ (unsigned long long)dev_max_lba);
+ goto out_error;
+ }
+
+ raid_device->pd_handle[count] = le16_to_cpu(pd_pg0.DevHandle);
+ }
+
+ /*
+ * Assumption for WD: Direct I/O is not supported if the volume is
+ * not RAID0
+ */
+ if (raid_device->volume_type != MPI2_RAID_VOL_TYPE_RAID0) {
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+ "for the drive with handle(0x%04x): type=%d, "
+ "s_sz=%uK, blk_size=%u\n", ioc->name,
+ raid_device->handle, raid_device->volume_type,
+ (le32_to_cpu(vol_pg0->StripeSize) *
+ le16_to_cpu(vol_pg0->BlockSize)) / 1024,
+ le16_to_cpu(vol_pg0->BlockSize));
+ goto out_error;
+ }
+
+ stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
+ stripe_exp = find_first_bit(&stripe_sz, 32);
+ if (stripe_exp == 32) {
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+ "for the drive with handle(0x%04x) invalid stripe sz %uK\n",
+ ioc->name, raid_device->handle,
+ (le32_to_cpu(vol_pg0->StripeSize) *
+ le16_to_cpu(vol_pg0->BlockSize)) / 1024);
+ goto out_error;
+ }
+ raid_device->stripe_exponent = stripe_exp;
+ block_sz = le16_to_cpu(vol_pg0->BlockSize);
+ block_exp = find_first_bit(&block_sz, 16);
+ if (block_exp == 16) {
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+ "for the drive with handle(0x%04x) invalid block sz %u\n",
+ ioc->name, raid_device->handle,
+ le16_to_cpu(vol_pg0->BlockSize));
+ goto out_error;
+ }
+ raid_device->block_exponent = block_exp;
+ raid_device->direct_io_enabled = 1;
+
+ pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is Enabled for the drive"
+ " with handle(0x%04x)\n", ioc->name, raid_device->handle);
+ /*
+ * WARPDRIVE: Though the following fields are not used for direct IO,
+ * stored for future purpose:
+ */
+ raid_device->max_lba = le64_to_cpu(vol_pg0->MaxLBA);
+ raid_device->stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
+ raid_device->block_sz = le16_to_cpu(vol_pg0->BlockSize);
+
+
+ kfree(vol_pg0);
+ return;
+
+out_error:
+ raid_device->direct_io_enabled = 0;
+ for (count = 0; count < num_pds; count++)
+ raid_device->pd_handle[count] = 0;
+ kfree(vol_pg0);
+ return;
+}
+
+/**
+ * mpt3sas_scsi_direct_io_get - returns direct io flag
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Returns the smid stored scmd pointer.
+ */
+inline u8
+mpt3sas_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+ return ioc->scsi_lookup[smid - 1].direct_io;
+}
+
+/**
+ * mpt3sas_scsi_direct_io_set - sets direct io flag
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @direct_io: Zero or non-zero value to set in the direct_io flag
+ *
+ * Returns Nothing.
+ */
+inline void
+mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io)
+{
+ ioc->scsi_lookup[smid - 1].direct_io = direct_io;
+}
+
+/**
+ * mpt3sas_setup_direct_io - setup MPI request for WARPDRIVE Direct I/O
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ * @raid_device: pointer to raid device data structure
+ * @mpi_request: pointer to the SCSI_IO reqest message frame
+ * @smid: system request message index
+ *
+ * Returns nothing
+ */
+void
+mpt3sas_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
+ struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
+ u16 smid)
+{
+ sector_t v_lba, p_lba, stripe_off, column, io_size;
+ u32 stripe_sz, stripe_exp;
+ u8 num_pds, cmd = scmd->cmnd[0];
+
+ if (cmd != READ_10 && cmd != WRITE_10 &&
+ cmd != READ_16 && cmd != WRITE_16)
+ return;
+
+ if (cmd == READ_10 || cmd == WRITE_10)
+ v_lba = get_unaligned_be32(&mpi_request->CDB.CDB32[2]);
+ else
+ v_lba = get_unaligned_be64(&mpi_request->CDB.CDB32[2]);
+
+ io_size = scsi_bufflen(scmd) >> raid_device->block_exponent;
+
+ if (v_lba + io_size - 1 > raid_device->max_lba)
+ return;
+
+ stripe_sz = raid_device->stripe_sz;
+ stripe_exp = raid_device->stripe_exponent;
+ stripe_off = v_lba & (stripe_sz - 1);
+
+ /* Return unless IO falls within a stripe */
+ if (stripe_off + io_size > stripe_sz)
+ return;
+
+ num_pds = raid_device->num_pds;
+ p_lba = v_lba >> stripe_exp;
+ column = sector_div(p_lba, num_pds);
+ p_lba = (p_lba << stripe_exp) + stripe_off;
+ mpi_request->DevHandle = cpu_to_le16(raid_device->pd_handle[column]);
+
+ if (cmd == READ_10 || cmd == WRITE_10)
+ put_unaligned_be32(lower_32_bits(p_lba),
+ &mpi_request->CDB.CDB32[2]);
+ else
+ put_unaligned_be64(p_lba, &mpi_request->CDB.CDB32[2]);
+
+ mpt3sas_scsi_direct_io_set(ioc, smid, 1);
+}
Change List: * Moved mpt2sas_warpdrive.c file from mpt2sas to mpt3sas folder and renamed it as mpt3sas_warpdrive.c. * Also renamed the functions in mpt3sas_warpdrive.c file to follow current driver function name convention. * Updated the Makefile to build mpt3sas_warpdrive.o file for these warpdrive specific functions. * Also in function mpt3sas_setup_direct_io(), used sector_div() API instead of division operator (which gives compilation errors on 32 bit machines) Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> --- drivers/scsi/mpt2sas/mpt2sas_warpdrive.c | 338 ------------------------------ drivers/scsi/mpt3sas/Makefile | 3 +- drivers/scsi/mpt3sas/mpt3sas_base.h | 16 ++ drivers/scsi/mpt3sas/mpt3sas_scsih.c | 44 ++-- drivers/scsi/mpt3sas/mpt3sas_warpdrive.c | 344 +++++++++++++++++++++++++++++++ 5 files changed, 376 insertions(+), 369 deletions(-) delete mode 100644 drivers/scsi/mpt2sas/mpt2sas_warpdrive.c create mode 100644 drivers/scsi/mpt3sas/mpt3sas_warpdrive.c