deleted file mode 100644
@@ -1,61 +0,0 @@
-#
-# Kernel configuration file for the MPT2SAS
-#
-# This code is based on drivers/scsi/mpt2sas/Kconfig
-# Copyright (C) 2007-2014 LSI Corporation
-# (mailto:DL-MPTFusionLinux@lsi.com)
-
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# NO WARRANTY
-# THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
-# CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
-# LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
-# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
-# solely responsible for determining the appropriateness of using and
-# distributing the Program and assumes all risks associated with its
-# exercise of rights under this Agreement, including but not limited to
-# the risks and costs of program errors, damage to or loss of data,
-# programs or equipment, and unavailability or interruption of operations.
-
-# DISCLAIMER OF LIABILITY
-# NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
-# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
-# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
-# TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-# USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
-# HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
-# USA.
-
-config SCSI_MPT2SAS
- tristate "LSI MPT Fusion SAS 2.0 Device Driver"
- depends on PCI && SCSI
- select SCSI_SAS_ATTRS
- select RAID_ATTRS
- ---help---
- This driver supports PCI-Express SAS 6Gb/s Host Adapters.
-
-config SCSI_MPT2SAS_MAX_SGE
- int "LSI MPT Fusion Max number of SG Entries (16 - 128)"
- depends on PCI && SCSI && SCSI_MPT2SAS
- default "128"
- range 16 128
- ---help---
- This option allows you to specify the maximum number of scatter-
- gather entries per I/O. The driver default is 128, which matches
- SAFE_PHYS_SEGMENTS. However, it may decreased down to 16.
- Decreasing this parameter will reduce memory requirements
- on a per controller instance.
deleted file mode 100644
@@ -1,15 +0,0 @@
-# mpt2sas makefile
-
-# share the official mpi headers from the mpt3sas driver
-ccflags-y += -I$(src)/../mpt3sas
-ccflags-y += -DSCSI_MPT2SAS
-
-# use the common object files from mpt3sas driver
-obj-$(CONFIG_SCSI_MPT2SAS) += mpt2sas.o
-mpt2sas-y += ../mpt3sas/mpt3sas_base.o \
- ../mpt3sas/mpt3sas_config.o \
- ../mpt3sas/mpt3sas_scsih.o \
- ../mpt3sas/mpt3sas_transport.o \
- ../mpt3sas/mpt3sas_ctl.o \
- ../mpt3sas/mpt3sas_trigger_diag.o \
- mpt2sas_module.o
deleted file mode 100644
@@ -1,281 +0,0 @@
-/*
- * Scsi Host Layer for MPT (Message Passing Technology) based controllers
- *
- * Copyright (C) 2012-2014 LSI Corporation
- * Copyright (C) 2013-2015 Avago Technologies
- * (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program.
- */
-
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/raid_class.h>
-
-#include "mpt3sas_base.h"
-#include "mpt3sas_ctl.h"
-
-MODULE_AUTHOR(MPT3SAS_AUTHOR);
-MODULE_DESCRIPTION(MPT2SAS_DESCRIPTION);
-MODULE_LICENSE("GPL");
-MODULE_VERSION(MPT2SAS_DRIVER_VERSION);
-
-/* shost template */
-static struct scsi_host_template mpt2sas_driver_template = {
- .module = THIS_MODULE,
- .name = "Fusion MPT SAS Host",
- .proc_name = MPT2SAS_DRIVER_NAME,
- .queuecommand = scsih_qcmd,
- .target_alloc = scsih_target_alloc,
- .slave_alloc = scsih_slave_alloc,
- .slave_configure = scsih_slave_configure,
- .target_destroy = scsih_target_destroy,
- .slave_destroy = scsih_slave_destroy,
- .scan_finished = scsih_scan_finished,
- .scan_start = scsih_scan_start,
- .change_queue_depth = scsih_change_queue_depth,
- .eh_abort_handler = scsih_abort,
- .eh_device_reset_handler = scsih_dev_reset,
- .eh_target_reset_handler = scsih_target_reset,
- .eh_host_reset_handler = scsih_host_reset,
- .bios_param = scsih_bios_param,
- .can_queue = 1,
- .this_id = -1,
- .sg_tablesize = MPT2SAS_SG_DEPTH,
- .max_sectors = 32767,
- .cmd_per_lun = 7,
- .use_clustering = ENABLE_CLUSTERING,
- .shost_attrs = mpt3sas_host_attrs,
- .sdev_attrs = mpt3sas_dev_attrs,
- .track_queue_depth = 1,
-};
-
-/* raid transport support */
-static struct raid_function_template mpt2sas_raid_functions = {
- .cookie = &mpt2sas_driver_template,
- .is_raid = scsih_is_raid,
- .get_resync = scsih_get_resync,
- .get_state = scsih_get_state,
-};
-
-/*
- * The pci device ids are defined in mpi/mpi2_cnfg.h.
- */
-static const struct pci_device_id mpt2sas_pci_table[] = {
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2004,
- PCI_ANY_ID, PCI_ANY_ID },
- /* Falcon ~ 2008*/
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2008,
- PCI_ANY_ID, PCI_ANY_ID },
- /* Liberator ~ 2108 */
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_1,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_2,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_3,
- PCI_ANY_ID, PCI_ANY_ID },
- /* Meteor ~ 2116 */
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_1,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_2,
- PCI_ANY_ID, PCI_ANY_ID },
- /* Thunderbolt ~ 2208 */
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_1,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_2,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_3,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_4,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_5,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_6,
- PCI_ANY_ID, PCI_ANY_ID },
- /* Mustang ~ 2308 */
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_1,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_2,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_3,
- PCI_ANY_ID, PCI_ANY_ID },
- /* SSS6200 */
- { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SSS6200,
- PCI_ANY_ID, PCI_ANY_ID },
- {0} /* Terminating entry */
-};
-MODULE_DEVICE_TABLE(pci, mpt2sas_pci_table);
-
-static const struct file_operations mpt2sas_ctl_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = ctl_ioctl,
- .poll = ctl_poll,
- .fasync = ctl_fasync,
-#ifdef CONFIG_COMPAT
- .compat_ioctl = ctl_ioctl_compat,
-#endif
- .llseek = noop_llseek,
-};
-
-static struct miscdevice mpt2sas_ctl_dev = {
- .minor = MPT2SAS_MINOR,
- .name = MPT2SAS_DEV_NAME,
- .fops = &mpt2sas_ctl_fops,
-};
-
-/**
- * mpt2sas_ctl_init - main entry point for ctl.
- *
- */
-void
-mpt2sas_ctl_init(void)
-{
- ctl_init();
- if (misc_register(&mpt2sas_ctl_dev) < 0)
- pr_err("%s can't register misc device [minor=%d]\n",
- MPT2SAS_DRIVER_NAME, MPT2SAS_MINOR);
-}
-
-/**
- * mpt2sas_ctl_exit - exit point for ctl
- *
- */
-void
-mpt2sas_ctl_exit(void)
-{
- ctl_exit();
- misc_deregister(&mpt2sas_ctl_dev);
-}
-
-/**
- * _mpt2sas_probe - attach and add scsi host
- * @pdev: PCI device struct
- * @id: pci device id
- *
- * Returns 0 success, anything else error.
- */
-static int
-_mpt2sas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
-{
- struct Scsi_Host *shost;
- int rv;
-
- shost = scsi_host_alloc(&mpt2sas_driver_template,
- sizeof(struct MPT3SAS_ADAPTER));
- if (!shost)
- return -ENODEV;
-
- sprintf(driver_name, "%s", MPT2SAS_DRIVER_NAME);
- rv = scsih_probe(pdev, shost);
- return rv;
-}
-
-static struct pci_error_handlers _mpt2sas_err_handler = {
- .error_detected = scsih_pci_error_detected,
- .mmio_enabled = scsih_pci_mmio_enabled,
- .slot_reset = scsih_pci_slot_reset,
- .resume = scsih_pci_resume,
-};
-
-static struct pci_driver mpt2sas_driver = {
- .name = MPT2SAS_DRIVER_NAME,
- .id_table = mpt2sas_pci_table,
- .probe = _mpt2sas_probe,
- .remove = scsih_remove,
- .shutdown = scsih_shutdown,
- .err_handler = &_mpt2sas_err_handler,
-#ifdef CONFIG_PM
- .suspend = scsih_suspend,
- .resume = scsih_resume,
-#endif
-};
-
-/**
- * _mpt2sas_init - main entry point for this driver.
- *
- * Returns 0 success, anything else error.
- */
-static int __init
-_mpt2sas_init(void)
-{
- int error;
-
- pr_info("%s version %s loaded\n", MPT2SAS_DRIVER_NAME,
- MPT2SAS_DRIVER_VERSION);
-
- mpt3sas_transport_template =
- sas_attach_transport(&mpt3sas_transport_functions);
- if (!mpt3sas_transport_template)
- return -ENODEV;
-
- mpt3sas_raid_template = raid_class_attach(&mpt2sas_raid_functions);
- if (!mpt3sas_raid_template) {
- sas_release_transport(mpt3sas_transport_template);
- return -ENODEV;
- }
-
- error = scsih_init();
- if (error) {
- scsih_exit();
- return error;
- }
-
- mpt2sas_ctl_init();
-
- error = pci_register_driver(&mpt2sas_driver);
- if (error)
- scsih_exit();
-
- return error;
-}
-
-/**
- * _mpt2sas_exit - exit point for this driver (when it is a module).
- *
- */
-static void __exit
-_mpt2sas_exit(void)
-{
- pr_info("mpt2sas version %s unloading\n",
- MPT2SAS_DRIVER_VERSION);
-
- pci_unregister_driver(&mpt2sas_driver);
-
- mpt2sas_ctl_exit();
-
- scsih_exit();
-}
-
-module_init(_mpt2sas_init);
-module_exit(_mpt2sas_exit);
deleted file mode 100644
@@ -1,253 +0,0 @@
-/*
- * Scsi Host Layer for MPT (Message Passing Technology) based controllers
- *
- * Copyright (C) 2012-2014 LSI Corporation
- * Copyright (C) 2013-2015 Avago Technologies
- * (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program.
- */
-
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/raid_class.h>
-
-#include "mpt3sas_base.h"
-#include "mpt3sas_ctl.h"
-
-MODULE_AUTHOR(MPT3SAS_AUTHOR);
-MODULE_DESCRIPTION(MPT3SAS_DESCRIPTION);
-MODULE_LICENSE("GPL");
-MODULE_VERSION(MPT3SAS_DRIVER_VERSION);
-
-/* shost template */
-static struct scsi_host_template mpt3sas_driver_template = {
- .module = THIS_MODULE,
- .name = "Fusion MPT SAS Host",
- .proc_name = MPT3SAS_DRIVER_NAME,
- .queuecommand = scsih_qcmd,
- .target_alloc = scsih_target_alloc,
- .slave_alloc = scsih_slave_alloc,
- .slave_configure = scsih_slave_configure,
- .target_destroy = scsih_target_destroy,
- .slave_destroy = scsih_slave_destroy,
- .scan_finished = scsih_scan_finished,
- .scan_start = scsih_scan_start,
- .change_queue_depth = scsih_change_queue_depth,
- .eh_abort_handler = scsih_abort,
- .eh_device_reset_handler = scsih_dev_reset,
- .eh_target_reset_handler = scsih_target_reset,
- .eh_host_reset_handler = scsih_host_reset,
- .bios_param = scsih_bios_param,
- .can_queue = 1,
- .this_id = -1,
- .sg_tablesize = MPT3SAS_SG_DEPTH,
- .max_sectors = 32767,
- .cmd_per_lun = 7,
- .use_clustering = ENABLE_CLUSTERING,
- .shost_attrs = mpt3sas_host_attrs,
- .sdev_attrs = mpt3sas_dev_attrs,
- .track_queue_depth = 1,
-};
-
-/* raid transport support */
-static struct raid_function_template mpt3sas_raid_functions = {
- .cookie = &mpt3sas_driver_template,
- .is_raid = scsih_is_raid,
- .get_resync = scsih_get_resync,
- .get_state = scsih_get_state,
-};
-
-/*
- * The pci device ids are defined in mpi/mpi2_cnfg.h.
- */
-static const struct pci_device_id mpt3sas_pci_table[] = {
- { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3004,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3008,
- PCI_ANY_ID, PCI_ANY_ID },
- /* Invader ~ 3108 */
- { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_1,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_2,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_5,
- PCI_ANY_ID, PCI_ANY_ID },
- { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_6,
- PCI_ANY_ID, PCI_ANY_ID },
- {0} /* Terminating entry */
-};
-MODULE_DEVICE_TABLE(pci, mpt3sas_pci_table);
-
-static const struct file_operations mpt3sas_ctl_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = ctl_ioctl,
- .poll = ctl_poll,
- .fasync = ctl_fasync,
-#ifdef CONFIG_COMPAT
- .compat_ioctl = ctl_ioctl_compat,
-#endif
-};
-
-static struct miscdevice mpt3sas_ctl_dev = {
- .minor = MPT3SAS_MINOR,
- .name = MPT3SAS_DEV_NAME,
- .fops = &mpt3sas_ctl_fops,
-};
-
-/**
- * mpt3sas_ctl_init - main entry point for ctl.
- *
- */
-void
-mpt3sas_ctl_init(void)
-{
- ctl_init();
- if (misc_register(&mpt3sas_ctl_dev) < 0)
- pr_err("%s can't register misc device [minor=%d]\n",
- MPT3SAS_DRIVER_NAME, MPT3SAS_MINOR);
-}
-
-/**
- * mpt3sas_ctl_exit - exit point for ctl
- *
- */
-void
-mpt3sas_ctl_exit(void)
-{
- ctl_exit();
- misc_deregister(&mpt3sas_ctl_dev);
-}
-
-/**
- * _mpt3sas_probe - attach and add scsi host
- * @pdev: PCI device struct
- * @id: pci device id
- *
- * Returns 0 success, anything else error.
- */
-static int
-_mpt3sas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
-{
- struct Scsi_Host *shost;
- int rv;
-
- shost = scsi_host_alloc(&mpt3sas_driver_template,
- sizeof(struct MPT3SAS_ADAPTER));
- if (!shost)
- return -ENODEV;
-
- sprintf(driver_name, "%s", MPT3SAS_DRIVER_NAME);
- rv = scsih_probe(pdev, shost);
- return rv;
-}
-
-static struct pci_error_handlers _mpt3sas_err_handler = {
- .error_detected = scsih_pci_error_detected,
- .mmio_enabled = scsih_pci_mmio_enabled,
- .slot_reset = scsih_pci_slot_reset,
- .resume = scsih_pci_resume,
-};
-
-static struct pci_driver mpt3sas_driver = {
- .name = MPT3SAS_DRIVER_NAME,
- .id_table = mpt3sas_pci_table,
- .probe = _mpt3sas_probe,
- .remove = scsih_remove,
- .shutdown = scsih_shutdown,
- .err_handler = &_mpt3sas_err_handler,
-#ifdef CONFIG_PM
- .suspend = scsih_suspend,
- .resume = scsih_resume,
-#endif
-};
-
-/**
- * _mpt3sas_init - main entry point for this driver.
- *
- * Returns 0 success, anything else error.
- */
-static int __init
-_mpt3sas_init(void)
-{
- int error;
-
- pr_info("%s version %s loaded\n", MPT3SAS_DRIVER_NAME,
- MPT3SAS_DRIVER_VERSION);
-
- mpt3sas_transport_template =
- sas_attach_transport(&mpt3sas_transport_functions);
- if (!mpt3sas_transport_template)
- return -ENODEV;
-
- mpt3sas_raid_template = raid_class_attach(&mpt3sas_raid_functions);
- if (!mpt3sas_raid_template) {
- sas_release_transport(mpt3sas_transport_template);
- return -ENODEV;
- }
-
- error = scsih_init();
- if (error) {
- scsih_exit();
- return error;
- }
-
- mpt3sas_ctl_init();
-
- error = pci_register_driver(&mpt3sas_driver);
- if (error)
- scsih_exit();
-
- return error;
-}
-
-/**
- * _mpt3sas_exit - exit point for this driver (when it is a module).
- *
- */
-static void __exit
-_mpt3sas_exit(void)
-{
- pr_info("mpt3sas version %s unloading\n",
- MPT3SAS_DRIVER_VERSION);
-
- pci_unregister_driver(&mpt3sas_driver);
-
- mpt3sas_ctl_exit();
-
- scsih_exit();
-}
-
-module_init(_mpt3sas_init);
-module_exit(_mpt3sas_exit);
Removed mpt2sas files, mpt2sas directory & mpt3sas_module.c file. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> --- drivers/scsi/mpt2sas/Kconfig | 61 -------- drivers/scsi/mpt2sas/Makefile | 15 -- drivers/scsi/mpt2sas/mpt2sas_module.c | 281 ---------------------------------- drivers/scsi/mpt3sas/mpt3sas_module.c | 253 ------------------------------ 4 files changed, 610 deletions(-) delete mode 100644 drivers/scsi/mpt2sas/Kconfig delete mode 100644 drivers/scsi/mpt2sas/Makefile delete mode 100644 drivers/scsi/mpt2sas/mpt2sas_module.c delete mode 100644 drivers/scsi/mpt3sas/mpt3sas_module.c