diff mbox

[4/9] be2iscsi: Fix VLAN support for IPv6 network

Message ID 1450073466-21077-5-git-send-email-jitendra.bhivare@avagotech.com (mailing list archive)
State Superseded, archived
Headers show

Commit Message

Jitendra Bhivare Dec. 14, 2015, 6:11 a.m. UTC 
From: Jitendra <jitendra.bhivare@avagotech.com>

Added VLAN operations in set IPv6 address for interface.

Signed-off-by: Jitendra <jitendra.bhivare@avagotech.com>
---
 drivers/scsi/be2iscsi/be_iscsi.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

Comments

Hannes Reinecke Dec. 14, 2015, 3:11 p.m. UTC | #1 
On 12/14/2015 07:11 AM, Jitendra Bhivare wrote:
> From: Jitendra <jitendra.bhivare@avagotech.com>
>
> Added VLAN operations in set IPv6 address for interface.
>
> Signed-off-by: Jitendra <jitendra.bhivare@avagotech.com>
> ---
>   drivers/scsi/be2iscsi/be_iscsi.c |    4 ++++
>   1 files changed, 4 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c
> index 188d83f..c89a025 100644
> --- a/drivers/scsi/be2iscsi/be_iscsi.c
> +++ b/drivers/scsi/be2iscsi/be_iscsi.c
> @@ -466,6 +466,10 @@ beiscsi_set_ipv6(struct Scsi_Host *shost,
>   		ret = mgmt_set_ip(phba, iface_param, NULL,
>   				  ISCSI_BOOTPROTO_STATIC);
>   		break;
> +	case ISCSI_NET_PARAM_VLAN_ENABLED:
> +	case ISCSI_NET_PARAM_VLAN_TAG:
> +		ret = beiscsi_set_vlan_tag(shost, iface_param);
> +		break;
>   	default:
>   		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG,
>   			    "BS_%d : Param %d not supported\n",
>
Reviewed-by: Hannes Reinecke <hare@suse.com>

Cheers,

Hannes
diff mbox

Patch

diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c
index 188d83f..c89a025 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.c
+++ b/drivers/scsi/be2iscsi/be_iscsi.c
@@ -466,6 +466,10 @@  beiscsi_set_ipv6(struct Scsi_Host *shost,
 		ret = mgmt_set_ip(phba, iface_param, NULL,
 				  ISCSI_BOOTPROTO_STATIC);
 		break;
+	case ISCSI_NET_PARAM_VLAN_ENABLED:
+	case ISCSI_NET_PARAM_VLAN_TAG:
+		ret = beiscsi_set_vlan_tag(shost, iface_param);
+		break;
 	default:
 		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG,
 			    "BS_%d : Param %d not supported\n",