@@ -5670,6 +5670,7 @@ static int beiscsi_dev_probe(struct pci_dev *pcidev,
goto free_port;
}
mgmt_get_port_name(&phba->ctrl, phba);
+ beiscsi_get_params(phba);
if (enable_msix)
find_num_cpus(phba);
@@ -5687,7 +5688,6 @@ static int beiscsi_dev_probe(struct pci_dev *pcidev,
}
phba->shost->max_id = phba->params.cxns_per_ctrl;
- beiscsi_get_params(phba);
phba->shost->can_queue = phba->params.ios_per_ctrl;
ret = beiscsi_init_port(phba);
if (ret < 0) {
@@ -397,7 +397,9 @@ struct beiscsi_hba {
* group together since they are used most frequently
* for cid to cri conversion
*/
+#define BEISCSI_PHYS_PORT_MAX 4
unsigned int phys_port;
+ /* valid values of phys_port id are 0, 1, 2, 3 */
unsigned int eqid_count;
unsigned int cqid_count;
unsigned int iscsi_cid_start[BEISCSI_ULP_COUNT];
@@ -373,90 +373,146 @@ int mgmt_get_fw_config(struct be_ctrl_info *ctrl,
struct beiscsi_hba *phba)
{
struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
- struct be_fw_cfg *req = embedded_payload(wrb);
- int status = 0;
+ struct be_fw_cfg *pfw_cfg = embedded_payload(wrb);
+ uint32_t cid_count, icd_count;
+ int status = -EINVAL;
+ uint8_t ulp_num = 0;
mutex_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
+ be_wrb_hdr_prepare(wrb, sizeof(*pfw_cfg), true, 0);
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
-
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ be_cmd_hdr_prepare(&pfw_cfg->hdr, CMD_SUBSYSTEM_COMMON,
OPCODE_COMMON_QUERY_FIRMWARE_CONFIG,
EMBED_MBX_MAX_PAYLOAD_SIZE);
- status = be_mbox_notify(ctrl);
- if (!status) {
- uint8_t ulp_num = 0;
- struct be_fw_cfg *pfw_cfg;
- pfw_cfg = req;
- if (!is_chip_be2_be3r(phba)) {
- phba->fw_config.eqid_count = pfw_cfg->eqid_count;
- phba->fw_config.cqid_count = pfw_cfg->cqid_count;
+ if (be_mbox_notify(ctrl)) {
+ beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
+ "BG_%d : Failed in mgmt_get_fw_config\n");
+ goto fail_init;
+ }
- beiscsi_log(phba, KERN_INFO,
- BEISCSI_LOG_INIT,
- "BG_%d : EQ_Count : %d CQ_Count : %d\n",
- phba->fw_config.eqid_count,
+ /* FW response formats depend on port id */
+ phba->fw_config.phys_port = pfw_cfg->phys_port;
+ if (phba->fw_config.phys_port >= BEISCSI_PHYS_PORT_MAX) {
+ beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
+ "BG_%d : invalid physical port id %d\n",
+ phba->fw_config.phys_port);
+ goto fail_init;
+ }
+
+ /* populate and check FW config against min and max values */
+ if (!is_chip_be2_be3r(phba)) {
+ phba->fw_config.eqid_count = pfw_cfg->eqid_count;
+ phba->fw_config.cqid_count = pfw_cfg->cqid_count;
+ if (phba->fw_config.eqid_count == 0 ||
+ phba->fw_config.eqid_count > 2048) {
+ beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
+ "BG_%d : invalid EQ count %d\n",
+ phba->fw_config.eqid_count);
+ goto fail_init;
+ }
+ if (phba->fw_config.cqid_count == 0 ||
+ phba->fw_config.cqid_count > 4096) {
+ beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
+ "BG_%d : invalid CQ count %d\n",
phba->fw_config.cqid_count);
+ goto fail_init;
}
+ beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
+ "BG_%d : EQ_Count : %d CQ_Count : %d\n",
+ phba->fw_config.eqid_count,
+ phba->fw_config.cqid_count);
+ }
- for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++)
- if (pfw_cfg->ulp[ulp_num].ulp_mode &
- BEISCSI_ULP_ISCSI_INI_MODE)
- set_bit(ulp_num,
- &phba->fw_config.ulp_supported);
-
- phba->fw_config.phys_port = pfw_cfg->phys_port;
- for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++) {
- if (test_bit(ulp_num, &phba->fw_config.ulp_supported)) {
-
- phba->fw_config.iscsi_cid_start[ulp_num] =
- pfw_cfg->ulp[ulp_num].sq_base;
- phba->fw_config.iscsi_cid_count[ulp_num] =
- pfw_cfg->ulp[ulp_num].sq_count;
-
- phba->fw_config.iscsi_icd_start[ulp_num] =
- pfw_cfg->ulp[ulp_num].icd_base;
- phba->fw_config.iscsi_icd_count[ulp_num] =
- pfw_cfg->ulp[ulp_num].icd_count;
-
- phba->fw_config.iscsi_chain_start[ulp_num] =
- pfw_cfg->chain_icd[ulp_num].chain_base;
- phba->fw_config.iscsi_chain_count[ulp_num] =
- pfw_cfg->chain_icd[ulp_num].chain_count;
-
- beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
- "BG_%d : Function loaded on ULP : %d\n"
- "\tiscsi_cid_count : %d\n"
- "\tiscsi_cid_start : %d\n"
- "\t iscsi_icd_count : %d\n"
- "\t iscsi_icd_start : %d\n",
- ulp_num,
- phba->fw_config.
- iscsi_cid_count[ulp_num],
- phba->fw_config.
- iscsi_cid_start[ulp_num],
- phba->fw_config.
- iscsi_icd_count[ulp_num],
- phba->fw_config.
- iscsi_icd_start[ulp_num]);
- }
+ /**
+ * Check on which all ULP iSCSI Protocol is loaded.
+ * Set the Bit for those ULP. This set flag is used
+ * at all places in the code to check on which ULP
+ * iSCSi Protocol is loaded
+ **/
+ for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++) {
+ if (pfw_cfg->ulp[ulp_num].ulp_mode &
+ BEISCSI_ULP_ISCSI_INI_MODE) {
+ set_bit(ulp_num, &phba->fw_config.ulp_supported);
+
+ /* Get the CID, ICD and Chain count for each ULP */
+ phba->fw_config.iscsi_cid_start[ulp_num] =
+ pfw_cfg->ulp[ulp_num].sq_base;
+ phba->fw_config.iscsi_cid_count[ulp_num] =
+ pfw_cfg->ulp[ulp_num].sq_count;
+
+ phba->fw_config.iscsi_icd_start[ulp_num] =
+ pfw_cfg->ulp[ulp_num].icd_base;
+ phba->fw_config.iscsi_icd_count[ulp_num] =
+ pfw_cfg->ulp[ulp_num].icd_count;
+
+ phba->fw_config.iscsi_chain_start[ulp_num] =
+ pfw_cfg->chain_icd[ulp_num].chain_base;
+ phba->fw_config.iscsi_chain_count[ulp_num] =
+ pfw_cfg->chain_icd[ulp_num].chain_count;
+
+ beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
+ "BG_%d : Function loaded on ULP : %d\n"
+ "\tiscsi_cid_count : %d\n"
+ "\tiscsi_cid_start : %d\n"
+ "\t iscsi_icd_count : %d\n"
+ "\t iscsi_icd_start : %d\n",
+ ulp_num,
+ phba->fw_config.
+ iscsi_cid_count[ulp_num],
+ phba->fw_config.
+ iscsi_cid_start[ulp_num],
+ phba->fw_config.
+ iscsi_icd_count[ulp_num],
+ phba->fw_config.
+ iscsi_icd_start[ulp_num]);
}
+ }
- phba->fw_config.dual_ulp_aware = (pfw_cfg->function_mode &
- BEISCSI_FUNC_DUA_MODE);
+ if (phba->fw_config.ulp_supported == 0) {
+ beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
+ "BG_%d : iSCSI initiator mode not set: ULP0 %x ULP1 %x\n",
+ pfw_cfg->ulp[BEISCSI_ULP0].ulp_mode,
+ pfw_cfg->ulp[BEISCSI_ULP1].ulp_mode);
+ goto fail_init;
+ }
- beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
- "BG_%d : DUA Mode : 0x%x\n",
- phba->fw_config.dual_ulp_aware);
+ /**
+ * ICD is shared among ULPs. Use icd_count of any one loaded ULP
+ **/
+ for (ulp_num = 0; ulp_num < BEISCSI_ULP_COUNT; ulp_num++)
+ if (test_bit(ulp_num, &phba->fw_config.ulp_supported))
+ break;
+ icd_count = phba->fw_config.iscsi_icd_count[ulp_num];
+ if (icd_count == 0 || icd_count > 65536) {
+ beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
+ "BG_%d: invalid ICD count %d\n", icd_count);
+ goto fail_init;
+ }
- } else {
+ cid_count = BEISCSI_GET_CID_COUNT(phba, BEISCSI_ULP0) +
+ BEISCSI_GET_CID_COUNT(phba, BEISCSI_ULP1);
+ if (cid_count == 0 || cid_count > 4096) {
beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
- "BG_%d : Failed in mgmt_get_fw_config\n");
- status = -EINVAL;
+ "BG_%d: invalid CID count %d\n", cid_count);
+ goto fail_init;
}
+ /**
+ * Check FW is dual ULP aware i.e. can handle either
+ * of the protocols.
+ */
+ phba->fw_config.dual_ulp_aware = (pfw_cfg->function_mode &
+ BEISCSI_FUNC_DUA_MODE);
+
+ beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
+ "BG_%d : DUA Mode : 0x%x\n",
+ phba->fw_config.dual_ulp_aware);
+
+ /* all set, continue using this FW config */
+ status = 0;
+fail_init:
mutex_unlock(&ctrl->mbox_lock);
return status;
}
System crash in I+T card personality Fix to add validation for ULP in initiator mode, physical port number, and supported queue, icd, cid counts. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> --- drivers/scsi/be2iscsi/be_main.c | 2 +- drivers/scsi/be2iscsi/be_main.h | 2 + drivers/scsi/be2iscsi/be_mgmt.c | 188 ++++++++++++++++++++++++++-------------- 3 files changed, 125 insertions(+), 67 deletions(-)