From patchwork Thu Feb 4 10:36:07 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Yaniv Gardi X-Patchwork-Id: 8218611 Return-Path: X-Original-To: patchwork-linux-scsi@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id D15CDBEEE5 for ; Thu, 4 Feb 2016 10:46:20 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id D65532034C for ; Thu, 4 Feb 2016 10:46:19 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id B2416202F8 for ; Thu, 4 Feb 2016 10:46:18 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933009AbcBDKqI (ORCPT ); Thu, 4 Feb 2016 05:46:08 -0500 Received: from smtp.codeaurora.org ([198.145.29.96]:55175 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756804AbcBDKgg (ORCPT ); Thu, 4 Feb 2016 05:36:36 -0500 Received: from smtp.codeaurora.org (localhost [127.0.0.1]) by smtp.codeaurora.org (Postfix) with ESMTP id 1764E606A1; Thu, 4 Feb 2016 10:36:36 +0000 (UTC) Received: by smtp.codeaurora.org (Postfix, from userid 1000) id 0804060692; Thu, 4 Feb 2016 10:36:36 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Spam-Level: X-Spam-Status: No, score=-7.4 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 Received: from lx-ygardi.mea.qualcomm.com (unknown [185.23.60.4]) (using TLSv1.1 with cipher ECDHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) (Authenticated sender: ygardi@smtp.codeaurora.org) by smtp.codeaurora.org (Postfix) with ESMTPSA id F190960269; Thu, 4 Feb 2016 10:36:29 +0000 (UTC) From: Yaniv Gardi To: robherring2@gmail.com, James.Bottomley@HansenPartnership.com, pebolle@tiscali.nl, hch@infradead.org Cc: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, santoshsy@gmail.com, linux-scsi-owner@vger.kernel.org, subhashj@codeaurora.org, ygardi@codeaurora.org, Gilad Broner , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Vinayak Holikatti , "James E.J. Bottomley" , "Martin K. Petersen" , Hannes Reinecke , devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) Subject: [v4 01/14] scsi: ufs-qcom: add number of lanes per direction Date: Thu, 4 Feb 2016 12:36:07 +0200 Message-Id: <1454582180-3823-2-git-send-email-ygardi@codeaurora.org> X-Mailer: git-send-email 1.8.5.2 In-Reply-To: <1454582180-3823-1-git-send-email-ygardi@codeaurora.org> References: <1454582180-3823-1-git-send-email-ygardi@codeaurora.org> X-Virus-Scanned: ClamAV using ClamSMTP Sender: linux-scsi-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-scsi@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Different platform may have different number of lanes for the UFS link. Add parameter to device tree specifying how many lanes should be configured for the UFS link. Signed-off-by: Gilad Broner Signed-off-by: Yaniv Gardi Acked-by: Rob Herring --- .../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 3 ++ drivers/scsi/ufs/ufs-qcom.c | 39 ++++++++++++---------- drivers/scsi/ufs/ufshcd-pltfrm.c | 19 +++++++++++ drivers/scsi/ufs/ufshcd.c | 1 + drivers/scsi/ufs/ufshcd.h | 2 ++ 5 files changed, 47 insertions(+), 17 deletions(-) diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt index 03c0e98..66f6adf 100644 --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt @@ -38,6 +38,9 @@ Optional properties: defined or a value in the array is "0" then it is assumed that the frequency is set by the parent clock or a fixed rate clock source. +-lanes-per-direction : number of lanes available per direction - either 1 or 2. + Note that it is assume same number of lanes is used both + directions at once. If not specified, default is 2 lanes per direction. Note: If above properties are not defined it can be assumed that the supply regulators or clocks are always on. diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c index 4f38d00..ed57729 100644 --- a/drivers/scsi/ufs/ufs-qcom.c +++ b/drivers/scsi/ufs/ufs-qcom.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. + * Copyright (c) 2013-2016, Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -132,21 +132,24 @@ static int ufs_qcom_enable_lane_clks(struct ufs_qcom_host *host) if (err) goto disable_rx_l0; - err = ufs_qcom_host_clk_enable(dev, "rx_lane1_sync_clk", - host->rx_l1_sync_clk); - if (err) - goto disable_tx_l0; + if (host->hba->lanes_per_direction > 1) { + err = ufs_qcom_host_clk_enable(dev, "rx_lane1_sync_clk", + host->rx_l1_sync_clk); + if (err) + goto disable_tx_l0; - err = ufs_qcom_host_clk_enable(dev, "tx_lane1_sync_clk", - host->tx_l1_sync_clk); - if (err) - goto disable_rx_l1; + err = ufs_qcom_host_clk_enable(dev, "tx_lane1_sync_clk", + host->tx_l1_sync_clk); + if (err) + goto disable_rx_l1; + } host->is_lane_clks_enabled = true; goto out; disable_rx_l1: - clk_disable_unprepare(host->rx_l1_sync_clk); + if (host->hba->lanes_per_direction > 1) + clk_disable_unprepare(host->rx_l1_sync_clk); disable_tx_l0: clk_disable_unprepare(host->tx_l0_sync_clk); disable_rx_l0: @@ -170,14 +173,16 @@ static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host) if (err) goto out; - err = ufs_qcom_host_clk_get(dev, "rx_lane1_sync_clk", - &host->rx_l1_sync_clk); - if (err) - goto out; - - err = ufs_qcom_host_clk_get(dev, "tx_lane1_sync_clk", - &host->tx_l1_sync_clk); + /* In case of single lane per direction, don't read lane1 clocks */ + if (host->hba->lanes_per_direction > 1) { + err = ufs_qcom_host_clk_get(dev, "rx_lane1_sync_clk", + &host->rx_l1_sync_clk); + if (err) + goto out; + err = ufs_qcom_host_clk_get(dev, "tx_lane1_sync_clk", + &host->tx_l1_sync_clk); + } out: return err; } diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c index d2a7b12..718f12e 100644 --- a/drivers/scsi/ufs/ufshcd-pltfrm.c +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c @@ -40,6 +40,8 @@ #include "ufshcd.h" #include "ufshcd-pltfrm.h" +#define UFSHCD_DEFAULT_LANES_PER_DIRECTION 2 + static int ufshcd_parse_clock_info(struct ufs_hba *hba) { int ret = 0; @@ -277,6 +279,21 @@ void ufshcd_pltfrm_shutdown(struct platform_device *pdev) } EXPORT_SYMBOL_GPL(ufshcd_pltfrm_shutdown); +static void ufshcd_init_lanes_per_dir(struct ufs_hba *hba) +{ + struct device *dev = hba->dev; + int ret; + + ret = of_property_read_u32(dev->of_node, "lanes-per-direction", + &hba->lanes_per_direction); + if (ret) { + dev_dbg(hba->dev, + "%s: failed to read lanes-per-direction, ret=%d\n", + __func__, ret); + hba->lanes_per_direction = UFSHCD_DEFAULT_LANES_PER_DIRECTION; + } +} + /** * ufshcd_pltfrm_init - probe routine of the driver * @pdev: pointer to Platform device handle @@ -331,6 +348,8 @@ int ufshcd_pltfrm_init(struct platform_device *pdev, pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); + ufshcd_init_lanes_per_dir(hba); + err = ufshcd_init(hba, mmio_base, irq); if (err) { dev_err(dev, "Initialization failed\n"); diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 7ab6a45..65593b3 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -40,6 +40,7 @@ #include #include +#include #include "ufshcd.h" #include "unipro.h" diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 8e22e6c..2e5bbce 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -509,6 +509,8 @@ struct ufs_hba { bool wlun_dev_clr_ua; + /* Number of lanes available (1 or 2) for Rx/Tx */ + u32 lanes_per_direction; struct ufs_pa_layer_attr pwr_info; struct ufs_pwr_mode_info max_pwr_info;