@@ -784,8 +784,9 @@ void scsi_attach_vpd(struct scsi_device *sdev)
int pg83_supported = 0;
unsigned char __rcu *vpd_buf, *orig_vpd_buf = NULL;
- if (sdev->skip_vpd_pages)
+ if (!scsi_device_supports_vpd(sdev))
return;
+
retry_pg0:
vpd_buf = kmalloc(vpd_len, GFP_KERNEL);
if (!vpd_buf)
@@ -2795,23 +2795,6 @@ static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer)
sdkp->ws10 = 1;
}
-static int sd_try_extended_inquiry(struct scsi_device *sdp)
-{
- /* Attempt VPD inquiry if the device blacklist explicitly calls
- * for it.
- */
- if (sdp->try_vpd_pages)
- return 1;
- /*
- * Although VPD inquiries can go to SCSI-2 type devices,
- * some USB ones crash on receiving them, and the pages
- * we currently ask for are for SPC-3 and beyond
- */
- if (sdp->scsi_level > SCSI_SPC_2 && !sdp->skip_vpd_pages)
- return 1;
- return 0;
-}
-
static inline u32 logical_to_sectors(struct scsi_device *sdev, u32 blocks)
{
return blocks << (ilog2(sdev->sector_size) - 9);
@@ -2856,7 +2839,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
if (sdkp->media_present) {
sd_read_capacity(sdkp, buffer);
- if (sd_try_extended_inquiry(sdp)) {
+ if (scsi_device_supports_vpd(sdp)) {
sd_read_block_provisioning(sdkp);
sd_read_block_limits(sdkp);
sd_read_block_characteristics(sdkp);
@@ -523,6 +523,31 @@ static inline int scsi_device_tpgs(struct scsi_device *sdev)
return sdev->inquiry ? (sdev->inquiry[5] >> 4) & 0x3 : 0;
}
+/**
+ * scsi_device_supports_vpd - test if a device supports VPD pages
+ * @sdev: the &struct scsi_device to test
+ *
+ * If the 'try_vpd_pages' flag is set it takes precedence.
+ * Otherwise we will assume VPD pages are supported if the
+ * SCSI level is at least SPC-3 and 'skip_vpd_pages' is not set.
+ */
+static inline int scsi_device_supports_vpd(struct scsi_device *sdev)
+{
+ /* Attempt VPD inquiry if the device blacklist explicitly calls
+ * for it.
+ */
+ if (sdev->try_vpd_pages)
+ return 1;
+ /*
+ * Although VPD inquiries can go to SCSI-2 type devices,
+ * some USB ones crash on receiving them, and the pages
+ * we currently ask for are for SPC-3 and beyond
+ */
+ if (sdev->scsi_level > SCSI_SPC_2 && !sdev->skip_vpd_pages)
+ return 1;
+ return 0;
+}
+
#define MODULE_ALIAS_SCSI_DEVICE(type) \
MODULE_ALIAS("scsi:t-" __stringify(type) "*")
#define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
The patch "scsi: rescan VPD attributes" introduced a regression in which devices that don't support VPD were being scanned for VPD attributes anyway. This could cause issues for this parts and should be avoided so the check for scsi_level has been moved out of scsi_add_lun and into scsi_attach_vpd so that all callers will not scan VPD for devices that don't support it. Fixes: 09e2b0b14690 ("scsi: rescan VPD attributes") Suggested-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: Hannes Reinecke <hare@suse.com> --- drivers/scsi/scsi.c | 3 ++- drivers/scsi/sd.c | 19 +------------------ include/scsi/scsi_device.h | 25 +++++++++++++++++++++++++ 3 files changed, 28 insertions(+), 19 deletions(-)