| Message ID | 1476962064-8775-1-git-send-email-rsahu@apm.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
Hi Olof/Tejun, On Thu, Oct 20, 2016 at 4:44 PM, Rameshwar Prasad Sahu <rsahu@apm.com> wrote: > > This patch enables NCQ support for APM X-Gene SATA controller > hardware v1.1 that was broken with hardware v1.0. > > Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com> > --- > drivers/ata/ahci_xgene.c | 14 ++++++++------ > 1 files changed, 8 insertions(+), 6 deletions(-) > > diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c > index 73b19b2..8b88be9 100644 > --- a/drivers/ata/ahci_xgene.c > +++ b/drivers/ata/ahci_xgene.c > @@ -87,6 +87,7 @@ > > enum xgene_ahci_version { > XGENE_AHCI_V1 = 1, > + XGENE_AHCI_V1_1, > XGENE_AHCI_V2, > }; > > @@ -734,6 +735,7 @@ static struct scsi_host_template ahci_platform_sht = { > #ifdef CONFIG_ACPI > static const struct acpi_device_id xgene_ahci_acpi_match[] = { > { "APMC0D0D", XGENE_AHCI_V1}, > + { "APMC0D67", XGENE_AHCI_V1_1}, > { "APMC0D32", XGENE_AHCI_V2}, > {}, > }; > @@ -742,6 +744,7 @@ MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match); > > static const struct of_device_id xgene_ahci_of_match[] = { > {.compatible = "apm,xgene-ahci", .data = (void *) XGENE_AHCI_V1}, > + {.compatible = "apm,xgene-ahci-v1-1", .data = (void *) XGENE_AHCI_V1_1}, > {.compatible = "apm,xgene-ahci-v2", .data = (void *) XGENE_AHCI_V2}, > {}, > }; > @@ -755,8 +758,7 @@ static int xgene_ahci_probe(struct platform_device *pdev) > struct resource *res; > const struct of_device_id *of_devid; > enum xgene_ahci_version version = XGENE_AHCI_V1; > - const struct ata_port_info *ppi[] = { &xgene_ahci_v1_port_info, > - &xgene_ahci_v2_port_info }; > + const struct ata_port_info *ppi; > int rc; > > hpriv = ahci_platform_get_resources(pdev); > @@ -821,8 +823,6 @@ static int xgene_ahci_probe(struct platform_device *pdev) > dev_warn(&pdev->dev, "%s: Error reading device info. Assume version1\n", > __func__); > version = XGENE_AHCI_V1; > - } else if (info->valid & ACPI_VALID_CID) { > - version = XGENE_AHCI_V2; > } > } > } > @@ -858,18 +858,20 @@ skip_clk_phy: > > switch (version) { > case XGENE_AHCI_V1: > + ppi = &xgene_ahci_v1_port_info; > hpriv->flags = AHCI_HFLAG_NO_NCQ; > break; > case XGENE_AHCI_V2: > + ppi = &xgene_ahci_v2_port_info; > hpriv->flags |= AHCI_HFLAG_YES_FBS; > hpriv->irq_handler = xgene_ahci_irq_intr; > break; > default: > + ppi = &xgene_ahci_v1_port_info; > break; > } > > - rc = ahci_platform_init_host(pdev, hpriv, ppi[version - 1], > - &ahci_platform_sht); > + rc = ahci_platform_init_host(pdev, hpriv, ppi, &ahci_platform_sht); > if (rc) > goto disable_resources; > > -- > 1.7.1 Any comment on above patch ?? -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c index 73b19b2..8b88be9 100644 --- a/drivers/ata/ahci_xgene.c +++ b/drivers/ata/ahci_xgene.c @@ -87,6 +87,7 @@ enum xgene_ahci_version { XGENE_AHCI_V1 = 1, + XGENE_AHCI_V1_1, XGENE_AHCI_V2, }; @@ -734,6 +735,7 @@ static struct scsi_host_template ahci_platform_sht = { #ifdef CONFIG_ACPI static const struct acpi_device_id xgene_ahci_acpi_match[] = { { "APMC0D0D", XGENE_AHCI_V1}, + { "APMC0D67", XGENE_AHCI_V1_1}, { "APMC0D32", XGENE_AHCI_V2}, {}, }; @@ -742,6 +744,7 @@ MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match); static const struct of_device_id xgene_ahci_of_match[] = { {.compatible = "apm,xgene-ahci", .data = (void *) XGENE_AHCI_V1}, + {.compatible = "apm,xgene-ahci-v1-1", .data = (void *) XGENE_AHCI_V1_1}, {.compatible = "apm,xgene-ahci-v2", .data = (void *) XGENE_AHCI_V2}, {}, }; @@ -755,8 +758,7 @@ static int xgene_ahci_probe(struct platform_device *pdev) struct resource *res; const struct of_device_id *of_devid; enum xgene_ahci_version version = XGENE_AHCI_V1; - const struct ata_port_info *ppi[] = { &xgene_ahci_v1_port_info, - &xgene_ahci_v2_port_info }; + const struct ata_port_info *ppi; int rc; hpriv = ahci_platform_get_resources(pdev); @@ -821,8 +823,6 @@ static int xgene_ahci_probe(struct platform_device *pdev) dev_warn(&pdev->dev, "%s: Error reading device info. Assume version1\n", __func__); version = XGENE_AHCI_V1; - } else if (info->valid & ACPI_VALID_CID) { - version = XGENE_AHCI_V2; } } } @@ -858,18 +858,20 @@ skip_clk_phy: switch (version) { case XGENE_AHCI_V1: + ppi = &xgene_ahci_v1_port_info; hpriv->flags = AHCI_HFLAG_NO_NCQ; break; case XGENE_AHCI_V2: + ppi = &xgene_ahci_v2_port_info; hpriv->flags |= AHCI_HFLAG_YES_FBS; hpriv->irq_handler = xgene_ahci_irq_intr; break; default: + ppi = &xgene_ahci_v1_port_info; break; } - rc = ahci_platform_init_host(pdev, hpriv, ppi[version - 1], - &ahci_platform_sht); + rc = ahci_platform_init_host(pdev, hpriv, ppi, &ahci_platform_sht); if (rc) goto disable_resources;
This patch enables NCQ support for APM X-Gene SATA controller hardware v1.1 that was broken with hardware v1.0. Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com> --- drivers/ata/ahci_xgene.c | 14 ++++++++------ 1 files changed, 8 insertions(+), 6 deletions(-) -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html