diff mbox

[04/22] qla2xxx: Clear BIT 15 in NVRAM during initialization.

Message ID 1481056251-2310-5-git-send-email-himanshu.madhani@cavium.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Madhani, Himanshu Dec. 6, 2016, 8:30 p.m. UTC 
Some of the ports have BIT_15 of firmware_options1 set. This is a
reserved bit and should not be set for Target Mode. Clear BIT 15
during stage1 initialization.

Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
---
 drivers/scsi/qla2xxx/qla_target.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 8a762a6..adb3b93 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -6527,7 +6527,6 @@  static void qlt_disable_vha(struct scsi_qla_host *vha)
 		/* Disable ini mode, if requested */
 		if (!qla_ini_mode_enabled(vha))
 			nv->firmware_options_1 |= cpu_to_le32(BIT_5);
-
 		/* Disable Full Login after LIP */
 		nv->firmware_options_1 &= cpu_to_le32(~BIT_13);
 		/* Enable initial LIP */
@@ -6541,6 +6540,13 @@  static void qlt_disable_vha(struct scsi_qla_host *vha)
 
 		/* Disable Full Login after LIP */
 		nv->host_p &= cpu_to_le32(~BIT_10);
+
+		/*
+		 * clear BIT 15 explicitly as we have seen at least
+		 * a couple of instances where this was set and this
+		 * was causing the firmware to not be initialized.
+		 */
+		nv->firmware_options_1 &= __constant_cpu_to_le32(~BIT_15);
 		/* Enable target PRLI control */
 		nv->firmware_options_2 |= cpu_to_le32(BIT_14);
 	} else {
@@ -6630,6 +6636,13 @@  static void qlt_disable_vha(struct scsi_qla_host *vha)
 		nv->firmware_options_1 &= cpu_to_le32(~BIT_13);
 		/* Enable initial LIP */
 		nv->firmware_options_1 &= cpu_to_le32(~BIT_9);
+		/*
+		 * clear BIT 15 explicitly as we have seen at
+		 * least a couple of instances where this was set
+		 * and this was causing the firmware to not be
+		 * initialized.
+		 */
+		nv->firmware_options_1 &= __constant_cpu_to_le32(~BIT_15);
 		if (ql2xtgt_tape_enable)
 			/* Enable FC tape support */
 			nv->firmware_options_2 |= cpu_to_le32(BIT_12);