diff mbox

[v2,02/14] qla2xxx: Allow relogin to proceed if remote login did not finish

Message ID 1486161655-2307-3-git-send-email-himanshu.madhani@cavium.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Madhani, Himanshu Feb. 3, 2017, 10:40 p.m. UTC 
From: Quinn Tran <quinn.tran@cavium.com>

If the remote port have started the login process, then the
PLOGI and PRLI should be back to back. Driver will allow
the remote port to complete the process. For the case where
the remote port decide to back off from sending PRLI, this
local port sets an expiration timer for the PRLI. Once the
expiration time passes, the relogin retry logic is allowed
to go through and perform login with the remote port.

Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
---
 drivers/scsi/qla2xxx/qla_def.h    |  2 ++
 drivers/scsi/qla2xxx/qla_init.c   | 16 ++++++++++++++--
 drivers/scsi/qla2xxx/qla_isr.c    | 25 +++++++++++++++++++------
 drivers/scsi/qla2xxx/qla_target.c |  1 +
 4 files changed, 36 insertions(+), 8 deletions(-)

Comments

Bart Van Assche Feb. 8, 2017, 6:42 p.m. UTC | #1 
On Fri, 2017-02-03 at 14:40 -0800, Himanshu Madhani wrote:
> +	if (fcport->fw_login_state == DSC_LS_PLOGI_COMP) {
> +		unsigned long t = fcport->plogi_nack_done_jiff + HZ;
> +
> +		if (time_before_eq(jiffies, t))
> +			return;
> +	}

The above code occurs two times in this patch. We try to avoid duplicating
code in the Linux kernel, especially code that contains hardcoded constants.
Have you considered to change the name of plogi_nack_done_jiff into e.g.
plogi_done_deadline and to assign jiffies + HZ to that variable instead of
jiffies?

Bart.
Madhani, Himanshu Feb. 8, 2017, 7:16 p.m. UTC | #2 
On 2/8/17, 10:42 AM, "Bart Van Assche" <Bart.VanAssche@sandisk.com> wrote:

>The above code occurs two times in this patch. We try to avoid duplicating

>code in the Linux kernel, especially code that contains hardcoded constants.

>Have you considered to change the name of plogi_nack_done_jiff into e.g.

>plogi_done_deadline and to assign jiffies + HZ to that variable instead of

>jiffies?


Thanks for the review. Will update patch and resend series.
diff mbox

Patch

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index fbaa39b..bf2ae8d3 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2300,6 +2300,8 @@  enum rscn_addr_format {
 	struct ct_sns_desc ct_desc;
 	enum discovery_state disc_state;
 	enum login_state fw_login_state;
+	unsigned long plogi_nack_done_jiff;
+
 	u32 login_gen, last_login_gen;
 	u32 rscn_gen, last_rscn_gen;
 	u32 chip_reset;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 9f3db52..e84ab37 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -876,10 +876,16 @@  int qla24xx_fcport_handle_login(struct scsi_qla_host *vha, fc_port_t *fcport)
 	fcport->login_retry--;
 
 	if ((fcport->fw_login_state == DSC_LS_PLOGI_PEND) ||
-	    (fcport->fw_login_state == DSC_LS_PLOGI_COMP) ||
 	    (fcport->fw_login_state == DSC_LS_PRLI_PEND))
 		return 0;
 
+	if (fcport->fw_login_state == DSC_LS_PLOGI_COMP) {
+		unsigned long t = fcport->plogi_nack_done_jiff + HZ;
+
+		if (time_before_eq(jiffies, t))
+			return 0;
+	}
+
 	/* for pure Target Mode. Login will not be initiated */
 	if (vha->host->active_mode == MODE_TARGET)
 		return 0;
@@ -1041,10 +1047,16 @@  void qla24xx_handle_relogin_event(scsi_qla_host_t *vha,
 		fcport->flags);
 
 	if ((fcport->fw_login_state == DSC_LS_PLOGI_PEND) ||
-	    (fcport->fw_login_state == DSC_LS_PLOGI_COMP) ||
 	    (fcport->fw_login_state == DSC_LS_PRLI_PEND))
 		return;
 
+	if (fcport->fw_login_state == DSC_LS_PLOGI_COMP) {
+		unsigned long t = fcport->plogi_nack_done_jiff + HZ;
+
+		if (time_before_eq(jiffies, t))
+			return;
+	}
+
 	if (fcport->flags & FCF_ASYNC_SENT) {
 		fcport->login_retry++;
 		set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 0fd3258..f1da53d 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1630,9 +1630,9 @@  static void qla2x00_error_entry(scsi_qla_host_t *, struct rsp_que *,
 		QLA_LOGIO_LOGIN_RETRIED : 0;
 	if (logio->entry_status) {
 		ql_log(ql_log_warn, fcport->vha, 0x5034,
-		    "Async-%s error entry - hdl=%x"
+		    "Async-%s error entry - %8phC hdl=%x"
 		    "portid=%02x%02x%02x entry-status=%x.\n",
-		    type, sp->handle, fcport->d_id.b.domain,
+		    type, fcport->port_name, sp->handle, fcport->d_id.b.domain,
 		    fcport->d_id.b.area, fcport->d_id.b.al_pa,
 		    logio->entry_status);
 		ql_dump_buffer(ql_dbg_async + ql_dbg_buffer, vha, 0x504d,
@@ -1643,8 +1643,9 @@  static void qla2x00_error_entry(scsi_qla_host_t *, struct rsp_que *,
 
 	if (le16_to_cpu(logio->comp_status) == CS_COMPLETE) {
 		ql_dbg(ql_dbg_async, fcport->vha, 0x5036,
-		    "Async-%s complete - hdl=%x portid=%02x%02x%02x "
-		    "iop0=%x.\n", type, sp->handle, fcport->d_id.b.domain,
+		    "Async-%s complete - %8phC hdl=%x portid=%02x%02x%02x "
+		    "iop0=%x.\n", type, fcport->port_name, sp->handle,
+		    fcport->d_id.b.domain,
 		    fcport->d_id.b.area, fcport->d_id.b.al_pa,
 		    le32_to_cpu(logio->io_parameter[0]));
 
@@ -1684,6 +1685,17 @@  static void qla2x00_error_entry(scsi_qla_host_t *, struct rsp_que *,
 	case LSC_SCODE_NPORT_USED:
 		data[0] = MBS_LOOP_ID_USED;
 		break;
+	case LSC_SCODE_CMD_FAILED:
+		if (iop[1] == 0x0606) {
+			/*
+			 * PLOGI/PRLI Completed. We must have Recv PLOGI/PRLI,
+			 * Target side acked.
+			 */
+			data[0] = MBS_COMMAND_COMPLETE;
+			goto logio_done;
+		}
+		data[0] = MBS_COMMAND_ERROR;
+		break;
 	case LSC_SCODE_NOXCB:
 		vha->hw->exch_starvation++;
 		if (vha->hw->exch_starvation > 5) {
@@ -1705,8 +1717,9 @@  static void qla2x00_error_entry(scsi_qla_host_t *, struct rsp_que *,
 	}
 
 	ql_dbg(ql_dbg_async, fcport->vha, 0x5037,
-	    "Async-%s failed - hdl=%x portid=%02x%02x%02x comp=%x "
-	    "iop0=%x iop1=%x.\n", type, sp->handle, fcport->d_id.b.domain,
+	    "Async-%s failed - %8phC hdl=%x portid=%02x%02x%02x comp=%x "
+	    "iop0=%x iop1=%x.\n", type, fcport->port_name,
+		sp->handle, fcport->d_id.b.domain,
 	    fcport->d_id.b.area, fcport->d_id.b.al_pa,
 	    le16_to_cpu(logio->comp_status),
 	    le32_to_cpu(logio->io_parameter[0]),
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 19ac2b5..8d21c04 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -554,6 +554,7 @@  void qla2x00_async_nack_sp_done(void *s, int res)
 		sp->fcport->login_gen++;
 		sp->fcport->fw_login_state = DSC_LS_PLOGI_COMP;
 		sp->fcport->logout_on_delete = 1;
+		sp->fcport->plogi_nack_done_jiff = jiffies;
 		break;
 
 	case SRB_NACK_PRLI: