@@ -208,7 +208,7 @@ considered to fail always.
int (* eh_abort_handler)(struct scsi_cmnd *);
int (* eh_device_reset_handler)(struct scsi_cmnd *);
int (* eh_bus_reset_handler)(struct scsi_cmnd *);
-int (* eh_host_reset_handler)(struct scsi_cmnd *);
+int (* eh_host_reset_handler)(struct Scsi_Host *);
Higher-severity actions are taken only when lower-severity actions
cannot recover some of failed scmds. Also, note that failure of the
@@ -891,7 +891,7 @@ Details:
/**
* eh_host_reset_handler - reset host (host bus adapter)
- * @scp: SCSI host that contains this device should be reset
+ * @shost: SCSI host that should be reset
*
* Returns SUCCESS if command aborted else FAILED
*
@@ -908,7 +908,7 @@ Details:
*
* Optionally defined in: LLD
**/
- int eh_host_reset_handler(struct scsi_cmnd * scp)
+ int eh_host_reset_handler(struct Scsi_Host * shost)
/**
@@ -329,7 +329,7 @@ struct disk_stat {
static DEF_SCSI_QCMD(simscsi_queuecommand)
static int
-simscsi_host_reset (struct scsi_cmnd *sc)
+simscsi_host_reset (struct Scsi_Host *shost)
{
printk(KERN_ERR "simscsi_host_reset: not implemented\n");
return 0;
@@ -2679,11 +2679,11 @@ static int srp_reset_device(struct scsi_cmnd *scmnd)
return SUCCESS;
}
-static int srp_reset_host(struct scsi_cmnd *scmnd)
+static int srp_reset_host(struct Scsi_Host *shost)
{
- struct srp_target_port *target = host_to_target(scmnd->device->host);
+ struct srp_target_port *target = host_to_target(shost);
- shost_printk(KERN_ERR, target->scsi_host, PFX "SRP reset_host called\n");
+ shost_printk(KERN_ERR, shost, PFX "SRP reset_host called\n");
return srp_reconnect_rport(target->rport) == 0 ? SUCCESS : FAILED;
}
@@ -1902,15 +1902,15 @@ int mptscsih_show_info(struct seq_file *m, struct Scsi_Host *host)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
- * mptscsih_host_reset - Perform a SCSI host adapter RESET (new_eh variant)
- * @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
+ * mptscsih_host_reset - Perform a SCSI host adapter RESET
+ * @sh: Pointer to Scsi_Host structure, which is reset due to
*
* (linux scsi_host_template.eh_host_reset_handler routine)
*
* Returns SUCCESS or FAILED.
*/
int
-mptscsih_host_reset(struct scsi_cmnd *SCpnt)
+mptscsih_host_reset(struct Scsi_Host *sh)
{
MPT_SCSI_HOST * hd;
int status = SUCCESS;
@@ -1918,9 +1918,8 @@ int mptscsih_show_info(struct seq_file *m, struct Scsi_Host *host)
int retval;
/* If we can't locate the host to reset, then we failed. */
- if ((hd = shost_priv(SCpnt->device->host)) == NULL){
- printk(KERN_ERR MYNAM ": host reset: "
- "Can't locate host! (sc=%p)\n", SCpnt);
+ if ((hd = shost_priv(sh)) == NULL){
+ printk(KERN_ERR MYNAM ": host reset: Can't locate host!\n");
return FAILED;
}
@@ -1928,20 +1927,20 @@ int mptscsih_show_info(struct seq_file *m, struct Scsi_Host *host)
mptscsih_flush_running_cmds(hd);
ioc = hd->ioc;
- printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n",
- ioc->name, SCpnt);
+ printk(MYIOC_s_INFO_FMT "attempting host reset!\n",
+ ioc->name);
/* If our attempts to reset the host failed, then return a failed
* status. The host will be taken off line by the SCSI mid-layer.
*/
- retval = mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
+ retval = mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
if (retval < 0)
status = FAILED;
else
status = SUCCESS;
- printk(MYIOC_s_INFO_FMT "host reset: %s (sc=%p)\n",
- ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
+ printk(MYIOC_s_INFO_FMT "host reset: %s\n",
+ ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ));
return status;
}
@@ -121,7 +121,7 @@ extern int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel,
extern int mptscsih_abort(struct scsi_cmnd * SCpnt);
extern int mptscsih_dev_reset(struct scsi_cmnd * SCpnt);
extern int mptscsih_bus_reset(struct scsi_cmnd * SCpnt);
-extern int mptscsih_host_reset(struct scsi_cmnd *SCpnt);
+extern int mptscsih_host_reset(struct Scsi_Host *sh);
extern int mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev, sector_t capacity, int geom[]);
extern int mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
extern int mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
@@ -309,9 +309,8 @@ static int zfcp_scsi_eh_target_reset_handler(struct scsi_cmnd *scpnt)
return zfcp_task_mgmt_function(scpnt, FCP_TMF_TGT_RESET);
}
-static int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt)
+static int zfcp_scsi_eh_host_reset_handler(struct Scsi_Host *host)
{
- struct Scsi_Host *host = scpnt->device->host;
struct zfcp_adapter *adapter = (struct zfcp_adapter *)host->hostdata[0];
int ret = 0;
unsigned long flags;
@@ -1715,18 +1715,19 @@ static int twa_scsi_biosparam(struct scsi_device *sdev, struct block_device *bde
} /* End twa_scsi_biosparam() */
/* This is the new scsi eh reset function */
-static int twa_scsi_eh_reset(struct scsi_cmnd *SCpnt)
+static int twa_scsi_eh_reset(struct Scsi_Host *shost)
{
TW_Device_Extension *tw_dev = NULL;
int retval = FAILED;
- tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
+ tw_dev = (TW_Device_Extension *)shost->hostdata;
tw_dev->num_resets++;
- sdev_printk(KERN_WARNING, SCpnt->device,
- "WARNING: (0x%02X:0x%04X): Command (0x%x) timed out, resetting card.\n",
- TW_DRIVER, 0x2c, SCpnt->cmnd[0]);
+ shost_printk(KERN_WARNING, shost,
+ "WARNING: (0x%02X:0x%04X): "
+ "Command timed out, resetting card.\n",
+ TW_DRIVER, 0x2c);
/* Make sure we are not issuing an ioctl or resetting from ioctl */
mutex_lock(&tw_dev->ioctl_lock);
@@ -1428,18 +1428,19 @@ static int twl_scsi_biosparam(struct scsi_device *sdev, struct block_device *bde
} /* End twl_scsi_biosparam() */
/* This is the new scsi eh reset function */
-static int twl_scsi_eh_reset(struct scsi_cmnd *SCpnt)
+static int twl_scsi_eh_reset(struct Scsi_Host *shost)
{
TW_Device_Extension *tw_dev = NULL;
int retval = FAILED;
- tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
+ tw_dev = (TW_Device_Extension *)shost->hostdata;
tw_dev->num_resets++;
- sdev_printk(KERN_WARNING, SCpnt->device,
- "WARNING: (0x%02X:0x%04X): Command (0x%x) timed out, resetting card.\n",
- TW_DRIVER, 0x2c, SCpnt->cmnd[0]);
+ shost_printk(KERN_WARNING, shost,
+ "WARNING: (0x%02X:0x%04X): "
+ "Command timed out, resetting card.\n",
+ TW_DRIVER, 0x2c);
/* Make sure we are not issuing an ioctl or resetting from ioctl */
mutex_lock(&tw_dev->ioctl_lock);
@@ -1357,25 +1357,24 @@ static int tw_scsi_biosparam(struct scsi_device *sdev, struct block_device *bdev
} /* End tw_scsi_biosparam() */
/* This is the new scsi eh reset function */
-static int tw_scsi_eh_reset(struct scsi_cmnd *SCpnt)
+static int tw_scsi_eh_reset(struct Scsi_Host *shost)
{
TW_Device_Extension *tw_dev=NULL;
int retval = FAILED;
- tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
+ tw_dev = (TW_Device_Extension *)shost->hostdata;
tw_dev->num_resets++;
- sdev_printk(KERN_WARNING, SCpnt->device,
- "WARNING: Command (0x%x) timed out, resetting card.\n",
- SCpnt->cmnd[0]);
+ shost_printk(KERN_WARNING, shost,
+ "WARNING: Command timed out, resetting card.\n");
/* Make sure we are not issuing an ioctl or resetting from ioctl */
mutex_lock(&tw_dev->ioctl_lock);
/* Now reset the card and some of the device extension data */
if (tw_reset_device_extension(tw_dev)) {
- printk(KERN_WARNING "3w-xxxx: scsi%d: Reset failed.\n", tw_dev->host->host_no);
+ shost_printk(KERN_WARNING, shost, "Reset failed.\n");
goto out;
}
@@ -168,7 +168,7 @@
STATIC int NCR_700_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *);
STATIC int NCR_700_abort(struct scsi_cmnd * SCpnt);
-STATIC int NCR_700_host_reset(struct scsi_cmnd * SCpnt);
+STATIC int NCR_700_host_reset(struct Scsi_Host *host);
STATIC void NCR_700_chip_setup(struct Scsi_Host *host);
STATIC void NCR_700_chip_reset(struct Scsi_Host *host);
STATIC int NCR_700_slave_alloc(struct scsi_device *SDpnt);
@@ -1937,40 +1937,41 @@ STATIC DEF_SCSI_QCMD(NCR_700_queuecommand)
}
STATIC int
-NCR_700_host_reset(struct scsi_cmnd * SCp)
+NCR_700_host_reset(struct Scsi_Host * host)
{
DECLARE_COMPLETION_ONSTACK(complete);
- struct NCR_700_Host_Parameters *hostdata =
- (struct NCR_700_Host_Parameters *)SCp->device->host->hostdata[0];
+ struct NCR_700_Host_Parameters *hostdata =
+ (struct NCR_700_Host_Parameters *)host->hostdata[0];
- scmd_printk(KERN_INFO, SCp,
- "New error handler wants HOST reset, cmd %p\n\t", SCp);
- scsi_print_command(SCp);
+ shost_printk(KERN_INFO, host,
+ "New error handler wants HOST reset\n");
/* In theory, eh_complete should always be null because the
* eh is single threaded, but just in case we're handling a
* reset via sg or something */
- spin_lock_irq(SCp->device->host->host_lock);
+ spin_lock_irq(host->host_lock);
while (hostdata->eh_complete != NULL) {
- spin_unlock_irq(SCp->device->host->host_lock);
+ spin_unlock_irq(host->host_lock);
msleep_interruptible(100);
- spin_lock_irq(SCp->device->host->host_lock);
+ spin_lock_irq(host->host_lock);
}
hostdata->eh_complete = &complete;
- NCR_700_internal_bus_reset(SCp->device->host);
- NCR_700_chip_reset(SCp->device->host);
+ NCR_700_internal_bus_reset(host);
+ NCR_700_chip_reset(host);
- spin_unlock_irq(SCp->device->host->host_lock);
+ spin_unlock_irq(host->host_lock);
wait_for_completion(&complete);
- spin_lock_irq(SCp->device->host->host_lock);
+ spin_lock_irq(host->host_lock);
hostdata->eh_complete = NULL;
- /* Revalidate the transport parameters of the failing device */
- if(hostdata->fast)
- spi_schedule_dv_device(SCp->device);
-
- spin_unlock_irq(SCp->device->host->host_lock);
+ /* Revalidate the transport parameters for attached devices */
+ if(hostdata->fast) {
+ struct scsi_device *sdev;
+ __shost_for_each_device(sdev, host)
+ spi_schedule_dv_device(sdev);
+ }
+ spin_unlock_irq(host->host_lock);
return SUCCESS;
}
@@ -2998,21 +2998,15 @@ static bool blogic_write_outbox(struct blogic_adapter *adapter,
/* Error Handling (EH) support */
-static int blogic_hostreset(struct scsi_cmnd *SCpnt)
+static int blogic_hostreset(struct Scsi_Host *shost)
{
struct blogic_adapter *adapter =
- (struct blogic_adapter *) SCpnt->device->host->hostdata;
-
- unsigned int id = SCpnt->device->id;
- struct blogic_tgt_stats *stats = &adapter->tgt_stats[id];
+ (struct blogic_adapter *) shost->hostdata;
int rc;
- spin_lock_irq(SCpnt->device->host->host_lock);
-
- blogic_inc_count(&stats->adapter_reset_req);
-
+ spin_lock_irq(shost->host_lock);
rc = blogic_resetadapter(adapter, false);
- spin_unlock_irq(SCpnt->device->host->host_lock);
+ spin_unlock_irq(shost->host_lock);
return rc;
}
@@ -2297,14 +2297,13 @@ static int NCR5380_abort(struct scsi_cmnd *cmd)
/**
* NCR5380_host_reset - reset the SCSI host
- * @cmd: SCSI command undergoing EH
+ * @instance: SCSI host undergoing EH
*
* Returns SUCCESS
*/
-static int NCR5380_host_reset(struct scsi_cmnd *cmd)
+static int NCR5380_host_reset(struct Scsi_Host *instance)
{
- struct Scsi_Host *instance = cmd->device->host;
struct NCR5380_hostdata *hostdata = shost_priv(instance);
int i;
unsigned long flags;
@@ -728,11 +728,11 @@ static int NCR53c406a_queue_lck(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
static DEF_SCSI_QCMD(NCR53c406a_queue)
-static int NCR53c406a_host_reset(Scsi_Cmnd * SCpnt)
+static int NCR53c406a_host_reset(struct Scsi_Host * shost)
{
DEB(printk("NCR53c406a_reset called\n"));
- spin_lock_irq(SCpnt->device->host->host_lock);
+ spin_lock_irq(shost->host_lock);
outb(C4_IMG, CONFIG4); /* Select reg set 0 */
outb(CHIP_RESET, CMD_REG);
@@ -742,7 +742,7 @@ static int NCR53c406a_host_reset(Scsi_Cmnd * SCpnt)
rtrc(2);
- spin_unlock_irq(SCpnt->device->host->host_lock);
+ spin_unlock_irq(shost->host_lock);
return SUCCESS;
}
@@ -1051,13 +1051,11 @@ static int aac_eh_bus_reset(struct scsi_cmnd* cmd)
/*
* aac_eh_host_reset - Host reset command handling
- * @scsi_cmd: SCSI command block causing the reset
+ * @host: SCSI host to be reset
*
*/
-int aac_eh_host_reset(struct scsi_cmnd *cmd)
+int aac_eh_host_reset(struct Scsi_Host *host)
{
- struct scsi_device * dev = cmd->device;
- struct Scsi_Host * host = dev->host;
struct aac_dev * aac = (struct aac_dev *)host->hostdata;
int ret = FAILED;
__le32 supported_options2 = 0;
@@ -7108,9 +7108,8 @@ static int AscISR(ASC_DVC_VAR *asc_dvc)
* sleeping is allowed and no locking other than for host structures is
* required. Returns SUCCESS or FAILED.
*/
-static int advansys_reset(struct scsi_cmnd *scp)
+static int advansys_reset(struct Scsi_Host *shost)
{
- struct Scsi_Host *shost = scp->device->host;
struct asc_board *boardp = shost_priv(shost);
unsigned long flags;
int status;
@@ -7120,7 +7119,7 @@ static int advansys_reset(struct scsi_cmnd *scp)
ASC_STATS(shost, reset);
- scmd_printk(KERN_INFO, scp, "SCSI host reset started...\n");
+ shost_printk(KERN_INFO, shost, "SCSI host reset started...\n");
if (ASC_NARROW_BOARD(boardp)) {
ASC_DVC_VAR *asc_dvc = &boardp->dvc_var.asc_dvc_var;
@@ -7131,16 +7130,18 @@ static int advansys_reset(struct scsi_cmnd *scp)
/* Refer to ASC_IERR_* definitions for meaning of 'err_code'. */
if (asc_dvc->err_code || !asc_dvc->overrun_dma) {
- scmd_printk(KERN_INFO, scp, "SCSI host reset error: "
- "0x%x, status: 0x%x\n", asc_dvc->err_code,
+ shost_printk(KERN_INFO, shost,
+ "SCSI host reset error: 0x%x, status: 0x%x\n",
+ asc_dvc->err_code,
status);
ret = FAILED;
} else if (status) {
- scmd_printk(KERN_INFO, scp, "SCSI host reset warning: "
- "0x%x\n", status);
+ shost_printk(KERN_INFO, shost,
+ "SCSI host reset warning: 0x%x\n",
+ status);
} else {
- scmd_printk(KERN_INFO, scp, "SCSI host reset "
- "successful\n");
+ shost_printk(KERN_INFO, shost,
+ "SCSI host reset successful\n");
}
ASC_DBG(1, "after AscInitAsc1000Driver()\n");
@@ -7157,12 +7158,13 @@ static int advansys_reset(struct scsi_cmnd *scp)
ASC_DBG(1, "before AdvResetChipAndSB()\n");
switch (AdvResetChipAndSB(adv_dvc)) {
case ASC_TRUE:
- scmd_printk(KERN_INFO, scp, "SCSI host reset "
- "successful\n");
+ shost_printk(KERN_INFO, shost,
+ "SCSI host reset successful\n");
break;
case ASC_FALSE:
default:
- scmd_printk(KERN_INFO, scp, "SCSI host reset error\n");
+ shost_printk(KERN_INFO, shost,
+ "SCSI host reset error\n");
ret = FAILED;
break;
}
@@ -1205,7 +1205,7 @@ static void reset_ports(struct Scsi_Host *shpnt)
* Reset the host (bus and controller)
*
*/
-int aha152x_host_reset_host(struct Scsi_Host *shpnt)
+int aha152x_host_reset(struct Scsi_Host *shpnt)
{
aha152x_bus_reset_host(shpnt);
reset_ports(shpnt);
@@ -1214,15 +1214,6 @@ int aha152x_host_reset_host(struct Scsi_Host *shpnt)
}
/*
- * Reset the host (bus and controller)
- *
- */
-static int aha152x_host_reset(Scsi_Cmnd *SCpnt)
-{
- return aha152x_host_reset_host(SCpnt->device->host);
-}
-
-/*
* Return the "logical geometry"
*
*/
@@ -332,6 +332,6 @@ struct aha152x_setup {
struct Scsi_Host *aha152x_probe_one(struct aha152x_setup *);
void aha152x_release(struct Scsi_Host *);
-int aha152x_host_reset_host(struct Scsi_Host *);
+int aha152x_host_reset(struct Scsi_Host *);
#endif /* _AHA152X_H */
@@ -849,9 +849,8 @@ static int aha1542_dev_reset(struct scsi_cmnd *cmd)
return SUCCESS;
}
-static int aha1542_reset(struct scsi_cmnd *cmd, u8 reset_cmd)
+static int aha1542_reset(struct Scsi_Host *sh, u8 reset_cmd)
{
- struct Scsi_Host *sh = cmd->device->host;
struct aha1542_hostdata *aha1542 = shost_priv(sh);
unsigned long flags;
int i;
@@ -863,9 +862,9 @@ static int aha1542_reset(struct scsi_cmnd *cmd, u8 reset_cmd)
* we do this? Try this first, and we can add that later
* if it turns out to be useful.
*/
- outb(reset_cmd, CONTROL(cmd->device->host->io_port));
+ outb(reset_cmd, CONTROL(sh->io_port));
- if (!wait_mask(STATUS(cmd->device->host->io_port),
+ if (!wait_mask(STATUS(sh->io_port),
STATMASK, IDLE, STST | DIAGF | INVDCMD | DF | CDF, 0)) {
spin_unlock_irqrestore(sh->host_lock, flags);
return FAILED;
@@ -876,7 +875,7 @@ static int aha1542_reset(struct scsi_cmnd *cmd, u8 reset_cmd)
* us again after host reset.
*/
if (reset_cmd & HRST)
- setup_mailboxes(cmd->device->host);
+ setup_mailboxes(sh);
/*
* Now try to pick up the pieces. For all pending commands,
@@ -884,7 +883,7 @@ static int aha1542_reset(struct scsi_cmnd *cmd, u8 reset_cmd)
* out. We do not try and restart any commands or anything -
* the strategy handler takes care of that crap.
*/
- shost_printk(KERN_WARNING, cmd->device->host, "Sent BUS RESET to scsi host %d\n", cmd->device->host->host_no);
+ shost_printk(KERN_WARNING, sh, "Sent BUS RESET to scsi host %d\n", cmd->device->host->host_no);
for (i = 0; i < AHA1542_MAILBOXES; i++) {
if (aha1542->int_cmds[i] != NULL) {
@@ -913,12 +912,12 @@ static int aha1542_reset(struct scsi_cmnd *cmd, u8 reset_cmd)
static int aha1542_bus_reset(struct scsi_cmnd *cmd)
{
- return aha1542_reset(cmd, SCRST);
+ return aha1542_reset(cmd->device->host, SCRST);
}
-static int aha1542_host_reset(struct scsi_cmnd *cmd)
+static int aha1542_host_reset(struct Scsi_Host *sh)
{
- return aha1542_reset(cmd, HRST | SCRST);
+ return aha1542_reset(sh, HRST | SCRST);
}
static int aha1542_biosparam(struct scsi_device *sdev,
@@ -2650,9 +2650,9 @@ static void fas216_init_chip(FAS216_Info *info)
* Returns: FAILED if unable to reset.
* Notes: io_request_lock is taken, and irqs are disabled
*/
-int fas216_eh_host_reset(struct scsi_cmnd *SCpnt)
+int fas216_eh_host_reset(struct Scsi_Host *shost)
{
- FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
+ FAS216_Info *info = (FAS216_Info *)shost->hostdata;
spin_lock_irq(info->host->host_lock);
@@ -383,11 +383,11 @@
*/
extern int fas216_eh_bus_reset(struct scsi_cmnd *SCpnt);
-/* Function: int fas216_eh_host_reset(struct scsi_cmnd *SCpnt)
+/* Function: int fas216_eh_host_reset(struct Scsi_Host *shost)
* Purpose : Reset the host associated with this command
- * Params : SCpnt - command specifing host to reset
+ * Params : shost - host to reset
* Returns : FAILED if unable to reset
*/
-extern int fas216_eh_host_reset(struct scsi_cmnd *SCpnt);
+extern int fas216_eh_host_reset(struct Scsi_Host *shost);
#endif /* FAS216_H */
@@ -671,7 +671,7 @@ static void atari_scsi_falcon_reg_write(unsigned int reg, u8 value)
#include "NCR5380.c"
-static int atari_scsi_host_reset(struct scsi_cmnd *cmd)
+static int atari_scsi_host_reset(struct Scsi_Host *shost)
{
int rv;
unsigned long flags;
@@ -688,7 +688,7 @@ static int atari_scsi_host_reset(struct scsi_cmnd *cmd)
atari_dma_orig_addr = NULL;
}
- rv = NCR5380_host_reset(cmd);
+ rv = NCR5380_host_reset(shost);
/* The 5380 raises its IRQ line while _RST is active but the ST DMA
* "lock" has been released so this interrupt may end up handled by
@@ -2466,7 +2466,7 @@ static int cxlflash_eh_device_reset_handler(struct scsi_cmnd *scp)
/**
* cxlflash_eh_host_reset_handler() - reset the host adapter
- * @scp: SCSI command from stack identifying host.
+ * @host: SCSI host adapter.
*
* Following a reset, the state is evaluated again in case an EEH occurred
* during the reset. In such a scenario, the host reset will either yield
@@ -2477,21 +2477,14 @@ static int cxlflash_eh_device_reset_handler(struct scsi_cmnd *scp)
* SUCCESS as defined in scsi/scsi.h
* FAILED as defined in scsi/scsi.h
*/
-static int cxlflash_eh_host_reset_handler(struct scsi_cmnd *scp)
+static int cxlflash_eh_host_reset_handler(struct Scsi_Host *host)
{
int rc = SUCCESS;
int rcr = 0;
- struct Scsi_Host *host = scp->device->host;
struct cxlflash_cfg *cfg = shost_priv(host);
struct device *dev = &cfg->dev->dev;
- dev_dbg(dev, "%s: (scp=%p) %d/%d/%d/%llu "
- "cdb=(%08x-%08x-%08x-%08x)\n", __func__, scp, host->host_no,
- scp->device->channel, scp->device->id, scp->device->lun,
- get_unaligned_be32(&((u32 *)scp->cmnd)[0]),
- get_unaligned_be32(&((u32 *)scp->cmnd)[1]),
- get_unaligned_be32(&((u32 *)scp->cmnd)[2]),
- get_unaligned_be32(&((u32 *)scp->cmnd)[3]));
+ dev_dbg(dev, "%s: %d/-1/-1/-1\n", __func__, host->host_no);
switch (cfg->state) {
case STATE_NORMAL:
@@ -797,12 +797,12 @@ static int adpt_bus_reset(struct scsi_cmnd* cmd)
}
// This version of reset is called by the eh_error_handler
-static int __adpt_reset(struct scsi_cmnd* cmd)
+static int __adpt_reset(struct Scsi_Host* shost)
{
adpt_hba* pHba;
int rcode;
- pHba = (adpt_hba*)cmd->device->host->hostdata[0];
- printk(KERN_WARNING"%s: Hba Reset: scsi id %d: tid: %d\n",pHba->name,cmd->device->channel,pHba->channel[cmd->device->channel].tid );
+ pHba = (adpt_hba*)shost->hostdata[0];
+ printk(KERN_WARNING"%s: Hba Reset\n",pHba->name);
rcode = adpt_hba_reset(pHba);
if(rcode == 0){
printk(KERN_WARNING"%s: HBA reset complete\n",pHba->name);
@@ -813,13 +813,13 @@ static int __adpt_reset(struct scsi_cmnd* cmd)
}
}
-static int adpt_reset(struct scsi_cmnd* cmd)
+static int adpt_reset(struct Scsi_Host* shost)
{
int rc;
- spin_lock_irq(cmd->device->host->host_lock);
- rc = __adpt_reset(cmd);
- spin_unlock_irq(cmd->device->host->host_lock);
+ spin_lock_irq(shost->host_lock);
+ rc = __adpt_reset(shost);
+ spin_unlock_irq(shost->host_lock);
return rc;
}
@@ -31,7 +31,7 @@
static int adpt_detect(struct scsi_host_template * sht);
static int adpt_queue(struct Scsi_Host *h, struct scsi_cmnd * cmd);
static int adpt_abort(struct scsi_cmnd * cmd);
-static int adpt_reset(struct scsi_cmnd* cmd);
+static int adpt_reset(struct Scsi_Host * host);
static int adpt_release(struct Scsi_Host *host);
static int adpt_slave_configure(struct scsi_device *);
@@ -507,7 +507,7 @@
static int eata2x_release(struct Scsi_Host *);
static int eata2x_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
static int eata2x_eh_abort(struct scsi_cmnd *);
-static int eata2x_eh_host_reset(struct scsi_cmnd *);
+static int eata2x_eh_host_reset(struct Scsi_Host *);
static int eata2x_bios_param(struct scsi_device *, struct block_device *,
sector_t, int *);
static int eata2x_slave_configure(struct scsi_device *);
@@ -1896,20 +1896,16 @@ static int eata2x_eh_abort(struct scsi_cmnd *SCarg)
panic("%s: abort, mbox %d, invalid cp_stat.\n", ha->board_name, i);
}
-static int eata2x_eh_host_reset(struct scsi_cmnd *SCarg)
+static int eata2x_eh_host_reset(struct Scsi_Host *shost)
{
unsigned int i, time, k, c, limit = 0;
struct scsi_cmnd *SCpnt;
- struct Scsi_Host *shost = SCarg->device->host;
struct hostdata *ha = (struct hostdata *)shost->hostdata;
- scmd_printk(KERN_INFO, SCarg, "reset, enter.\n");
+ shost_printk(KERN_INFO, shost, "reset, enter.\n");
spin_lock_irq(shost->host_lock);
- if (SCarg->host_scribble == NULL)
- printk("%s: reset, inactive.\n", ha->board_name);
-
if (ha->in_reset) {
printk("%s: reset, exit, already in reset.\n", ha->board_name);
spin_unlock_irq(shost->host_lock);
@@ -435,19 +435,18 @@ static int eata_pio_abort(struct scsi_cmnd *cmd)
panic("eata_pio: abort: invalid slot status\n");
}
-static int eata_pio_host_reset(struct scsi_cmnd *cmd)
+static int eata_pio_host_reset(struct Scsi_Host *host)
{
unsigned int x, limit = 0;
unsigned char success = 0;
struct scsi_cmnd *sp;
- struct Scsi_Host *host = cmd->device->host;
- DBG(DBG_ABNORM, scmd_printk(KERN_WARNING, cmd,
+ DBG(DBG_ABNORM, shost_printk(KERN_WARNING, host,
"eata_pio_reset called\n"));
spin_lock_irq(host->host_lock);
- if (HD(cmd)->state == RESET) {
+ if (SD(host)->state == RESET) {
printk(KERN_WARNING "eata_pio_reset: exit, already in reset.\n");
spin_unlock_irq(host->host_lock);
return FAILED;
@@ -455,13 +454,13 @@ static int eata_pio_host_reset(struct scsi_cmnd *cmd)
/* force all slots to be free */
- for (x = 0; x < cmd->device->host->can_queue; x++) {
+ for (x = 0; x < host->can_queue; x++) {
- if (HD(cmd)->ccb[x].status == FREE)
+ if (SD(host)->ccb[x].status == FREE)
continue;
- sp = HD(cmd)->ccb[x].cmd;
- HD(cmd)->ccb[x].status = RESET;
+ sp = SD(host)->ccb[x].cmd;
+ SD(host)->ccb[x].status = RESET;
printk(KERN_WARNING "eata_pio_reset: slot %d in reset.\n", x);
if (sp == NULL)
@@ -469,10 +468,10 @@ static int eata_pio_host_reset(struct scsi_cmnd *cmd)
}
/* hard reset the HBA */
- outb(EATA_CMD_RESET, cmd->device->host->base + HA_WCOMMAND);
+ outb(EATA_CMD_RESET, host->base + HA_WCOMMAND);
DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: board reset done.\n"));
- HD(cmd)->state = RESET;
+ SD(host)->state = RESET;
spin_unlock_irq(host->host_lock);
msleep(3000);
@@ -480,23 +479,23 @@ static int eata_pio_host_reset(struct scsi_cmnd *cmd)
DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: interrupts disabled, " "loops %d.\n", limit));
- for (x = 0; x < cmd->device->host->can_queue; x++) {
+ for (x = 0; x < host->can_queue; x++) {
/* Skip slots already set free by interrupt */
- if (HD(cmd)->ccb[x].status != RESET)
+ if (SD(host)->ccb[x].status != RESET)
continue;
- sp = HD(cmd)->ccb[x].cmd;
+ sp = SD(host)->ccb[x].cmd;
sp->result = DID_RESET << 16;
/* This mailbox is terminated */
printk(KERN_WARNING "eata_pio_reset: reset ccb %d.\n", x);
- HD(cmd)->ccb[x].status = FREE;
+ SD(host)->ccb[x].status = FREE;
sp->scsi_done(sp);
}
- HD(cmd)->state = 0;
+ SD(host)->state = 0;
spin_unlock_irq(host->host_lock);
@@ -977,7 +977,7 @@ u8 handle_hba_ioctl(struct esas2r_adapter *a,
/* SCSI error handler (eh) functions */
int esas2r_eh_abort(struct scsi_cmnd *cmd);
int esas2r_device_reset(struct scsi_cmnd *cmd);
-int esas2r_host_reset(struct scsi_cmnd *cmd);
+int esas2r_host_reset(struct Scsi_Host *shost);
int esas2r_bus_reset(struct scsi_cmnd *cmd);
int esas2r_target_reset(struct scsi_cmnd *cmd);
@@ -1122,10 +1122,10 @@ int esas2r_eh_abort(struct scsi_cmnd *cmd)
return SUCCESS;
}
-static int esas2r_host_bus_reset(struct scsi_cmnd *cmd, bool host_reset)
+static int esas2r_host_bus_reset(struct Scsi_Host *shost, bool host_reset)
{
struct esas2r_adapter *a =
- (struct esas2r_adapter *)cmd->device->host->hostdata;
+ (struct esas2r_adapter *)shost->hostdata;
if (test_bit(AF_DEGRADED_MODE, &a->flags))
return FAILED;
@@ -1150,18 +1150,20 @@ static int esas2r_host_bus_reset(struct scsi_cmnd *cmd, bool host_reset)
return SUCCESS;
}
-int esas2r_host_reset(struct scsi_cmnd *cmd)
+int esas2r_host_reset(struct Scsi_Host *shost)
{
- esas2r_log(ESAS2R_LOG_INFO, "host_reset (%p)", cmd);
+ esas2r_log(ESAS2R_LOG_INFO, "host_reset (%p)", shost);
- return esas2r_host_bus_reset(cmd, true);
+ return esas2r_host_bus_reset(shost, true);
}
int esas2r_bus_reset(struct scsi_cmnd *cmd)
{
- esas2r_log(ESAS2R_LOG_INFO, "bus_reset (%p)", cmd);
+ struct Scsi_Host *shost = cmd->device->host;
+
+ esas2r_log(ESAS2R_LOG_INFO, "bus_reset (%p)", shost);
- return esas2r_host_bus_reset(cmd, false);
+ return esas2r_host_bus_reset(shost, false);
}
static int esas2r_dev_targ_reset(struct scsi_cmnd *cmd, bool target_reset)
@@ -2655,9 +2655,9 @@ static int esp_eh_bus_reset_handler(struct scsi_cmnd *cmd)
}
/* All bets are off, reset the entire device. */
-static int esp_eh_host_reset_handler(struct scsi_cmnd *cmd)
+static int esp_eh_host_reset_handler(struct Scsi_Host *shost)
{
- struct esp *esp = shost_priv(cmd->device->host);
+ struct esp *esp = shost_priv(shost);
unsigned long flags;
spin_lock_irqsave(esp->host->host_lock, flags);
@@ -1568,7 +1568,7 @@ static int fdomain_16x0_abort(struct scsi_cmnd *SCpnt)
return SUCCESS;
}
-int fdomain_16x0_host_reset(struct scsi_cmnd *SCpnt)
+int fdomain_16x0_host_reset(struct Scsi_Host *shost)
{
unsigned long flags;
@@ -21,4 +21,4 @@
extern struct scsi_host_template fdomain_driver_template;
extern int fdomain_setup(char *str);
extern struct Scsi_Host *__fdomain_16x0_detect(struct scsi_host_template *tpnt );
-extern int fdomain_16x0_host_reset(struct scsi_cmnd *SCpnt);
+extern int fdomain_16x0_host_reset(struct Scsi_Host *shost);
@@ -343,7 +343,7 @@ static inline struct fnic *fnic_from_ctlr(struct fcoe_ctlr *fip)
int fnic_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
int fnic_abort_cmd(struct scsi_cmnd *);
int fnic_device_reset(struct scsi_cmnd *);
-int fnic_host_reset(struct scsi_cmnd *);
+int fnic_host_reset(struct Scsi_Host *);
int fnic_reset(struct Scsi_Host *);
void fnic_scsi_cleanup(struct fc_lport *);
void fnic_scsi_abort_io(struct fc_lport *);
@@ -2629,11 +2629,10 @@ int fnic_reset(struct Scsi_Host *shost)
* host is offlined by SCSI.
*
*/
-int fnic_host_reset(struct scsi_cmnd *sc)
+int fnic_host_reset(struct Scsi_Host *shost)
{
int ret;
unsigned long wait_host_tmo;
- struct Scsi_Host *shost = sc->device->host;
struct fc_lport *lp = shost_priv(shost);
struct fnic *fnic = lport_priv(lp);
unsigned long flags;
@@ -1104,12 +1104,12 @@ static int hptiop_reset_hba(struct hptiop_hba *hba)
return 0;
}
-static int hptiop_reset(struct scsi_cmnd *scp)
+static int hptiop_reset(struct Scsi_Host *host)
{
- struct hptiop_hba * hba = (struct hptiop_hba *)scp->device->host->hostdata;
+ struct hptiop_hba * hba = (struct hptiop_hba *)host->hostdata;
printk(KERN_WARNING "hptiop_reset(%d/%d/%d)\n",
- scp->device->host->host_no, -1, -1);
+ host->host_no, -1, -1);
return hptiop_reset_hba(hba)? FAILED : SUCCESS;
}
@@ -2526,10 +2526,10 @@ static int ibmvfc_eh_target_reset_handler(struct scsi_cmnd *cmd)
* @cmd: struct scsi_cmnd having problems
*
**/
-static int ibmvfc_eh_host_reset_handler(struct scsi_cmnd *cmd)
+static int ibmvfc_eh_host_reset_handler(struct Scsi_Host *shost)
{
int rc;
- struct ibmvfc_host *vhost = shost_priv(cmd->device->host);
+ struct ibmvfc_host *vhost = shost_priv(shost);
dev_err(vhost->dev, "Resetting connection due to error recovery\n");
rc = ibmvfc_issue_fc_host_lip(vhost->host);
@@ -1731,10 +1731,10 @@ static int ibmvscsi_eh_device_reset_handler(struct scsi_cmnd *cmd)
* ibmvscsi_eh_host_reset_handler - Reset the connection to the server
* @cmd: struct scsi_cmnd having problems
*/
-static int ibmvscsi_eh_host_reset_handler(struct scsi_cmnd *cmd)
+static int ibmvscsi_eh_host_reset_handler(struct Scsi_Host *shost)
{
unsigned long wait_switch = 0;
- struct ibmvscsi_host_data *hostdata = shost_priv(cmd->device->host);
+ struct ibmvscsi_host_data *hostdata = shost_priv(shost);
dev_err(hostdata->dev, "Resetting connection due to error recovery\n");
@@ -986,11 +986,11 @@ static void imm_reset_pulse(unsigned int base)
w_ctr(base, 0x04);
}
-static int imm_reset(struct scsi_cmnd *cmd)
+static int imm_reset(struct Scsi_Host *shost)
{
- imm_struct *dev = imm_dev(cmd->device->host);
+ imm_struct *dev = imm_dev(shost);
- if (cmd->SCp.phase)
+ if (dev->cur_cmd->SCp.phase)
imm_disconnect(dev);
dev->cur_cmd = NULL; /* Forget the problem */
@@ -5152,14 +5152,14 @@ static int ipr_wait_for_ops(struct ipr_ioa_cfg *ioa_cfg, void *device,
return SUCCESS;
}
-static int ipr_eh_host_reset(struct scsi_cmnd *cmd)
+static int ipr_eh_host_reset(struct Scsi_Host *shost)
{
struct ipr_ioa_cfg *ioa_cfg;
unsigned long lock_flags = 0;
int rc = SUCCESS;
ENTER;
- ioa_cfg = (struct ipr_ioa_cfg *) cmd->device->host->hostdata;
+ ioa_cfg = (struct ipr_ioa_cfg *) shost->hostdata;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
if (!ioa_cfg->in_reset_reload && !ioa_cfg->hrrq[IPR_INIT_HRRQ].ioa_is_dead) {
@@ -227,7 +227,7 @@
static int ips_detect(struct scsi_host_template *);
static int ips_release(struct Scsi_Host *);
static int ips_eh_abort(struct scsi_cmnd *);
-static int ips_eh_reset(struct scsi_cmnd *);
+static int ips_eh_reset(struct Scsi_Host *);
static int ips_queue(struct Scsi_Host *, struct scsi_cmnd *);
static const char *ips_info(struct Scsi_Host *);
static irqreturn_t do_ipsintr(int, void *);
@@ -834,13 +834,12 @@ int ips_eh_abort(struct scsi_cmnd *SC)
/* NOTE: this routine is called under the io_request_lock spinlock */
/* */
/****************************************************************************/
-static int __ips_eh_reset(struct scsi_cmnd *SC)
+static int __ips_eh_reset(struct Scsi_Host *shost)
{
int ret;
int i;
ips_ha_t *ha;
ips_scb_t *scb;
- ips_copp_wait_item_t *item;
METHOD_TRACE("ips_eh_reset", 1);
@@ -848,13 +847,7 @@ static int __ips_eh_reset(struct scsi_cmnd *SC)
return (FAILED);
#else
- if (!SC) {
- DEBUG(1, "Reset called with NULL scsi command");
-
- return (FAILED);
- }
-
- ha = (ips_ha_t *) SC->device->host->hostdata;
+ ha = (ips_ha_t *) shost->hostdata;
if (!ha) {
DEBUG(1, "Reset called with NULL ha struct");
@@ -1003,13 +996,13 @@ static int __ips_eh_reset(struct scsi_cmnd *SC)
}
-static int ips_eh_reset(struct scsi_cmnd *SC)
+static int ips_eh_reset(struct Scsi_Host *shost)
{
int rc;
- spin_lock_irq(SC->device->host->host_lock);
- rc = __ips_eh_reset(SC);
- spin_unlock_irq(SC->device->host->host_lock);
+ spin_lock_irq(shost->host_lock);
+ rc = __ips_eh_reset(shost);
+ spin_unlock_irq(shost->host_lock);
return rc;
}
@@ -1088,7 +1081,7 @@ static int ips_queue_lck(struct scsi_cmnd *SC, void (*done) (struct scsi_cmnd *)
return (0);
}
ha->ioctl_reset = 1; /* This reset request is from an IOCTL */
- __ips_eh_reset(SC);
+ __ips_eh_reset(SC->device->host);
SC->result = DID_OK << 16;
SC->scsi_done(SC);
return (0);
@@ -2212,11 +2212,10 @@ int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
/**
* fc_eh_host_reset() - Reset a Scsi_Host.
- * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
+ * @shost: The SCSI host to be reset
*/
-int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
+int fc_eh_host_reset(struct Scsi_Host *shost)
{
- struct Scsi_Host *shost = sc_cmd->device->host;
struct fc_lport *lport = shost_priv(shost);
unsigned long wait_tmo;
@@ -5310,9 +5310,8 @@ void lpfc_poll_timeout(unsigned long ptr)
* 0x2002 - Success
**/
static int
-lpfc_host_reset_handler(struct scsi_cmnd *cmnd)
+lpfc_host_reset_handler(struct Scsi_Host *shost)
{
- struct Scsi_Host *shost = cmnd->device->host;
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
int rc, ret = SUCCESS;
@@ -101,14 +101,14 @@ static int mac53c94_queue_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cm
static DEF_SCSI_QCMD(mac53c94_queue)
-static int mac53c94_host_reset(struct scsi_cmnd *cmd)
+static int mac53c94_host_reset(struct Scsi_Host *shost)
{
- struct fsc_state *state = (struct fsc_state *) cmd->device->host->hostdata;
+ struct fsc_state *state = (struct fsc_state *) shost->hostdata;
struct mac53c94_regs __iomem *regs = state->regs;
struct dbdma_regs __iomem *dma = state->dma;
unsigned long flags;
- spin_lock_irqsave(cmd->device->host->host_lock, flags);
+ spin_lock_irqsave(shost->host_lock, flags);
writel((RUN|PAUSE|FLUSH|WAKE) << 16, &dma->control);
writeb(CMD_SCSI_RESET, ®s->command); /* assert RST */
@@ -118,7 +118,7 @@ static int mac53c94_host_reset(struct scsi_cmnd *cmd)
mac53c94_init(state);
writeb(CMD_NOP, ®s->command);
- spin_unlock_irqrestore(cmd->device->host->host_lock, flags);
+ spin_unlock_irqrestore(shost->host_lock, flags);
return SUCCESS;
}
@@ -1887,13 +1887,13 @@ static DEF_SCSI_QCMD(megaraid_queue)
static int
-megaraid_reset(struct scsi_cmnd *cmd)
+megaraid_reset(struct Scsi_Host *shost)
{
adapter_t *adapter;
megacmd_t mc;
int rval;
- adapter = (adapter_t *)cmd->device->host->hostdata;
+ adapter = (adapter_t *)shost->hostdata;
#if MEGA_HAVE_CLUSTERING
mc.cmd = MEGA_CLUSTER_CMD;
@@ -963,7 +963,7 @@ struct mega_hbas {
static void mega_free_scb(adapter_t *, scb_t *);
static int megaraid_abort(Scsi_Cmnd *);
-static int megaraid_reset(Scsi_Cmnd *);
+static int megaraid_reset(struct Scsi_Host *);
static int megaraid_abort_and_reset(adapter_t *, Scsi_Cmnd *, int);
static int megaraid_biosparam(struct scsi_device *, struct block_device *,
sector_t, int []);
@@ -97,7 +97,7 @@
static void megaraid_sysfs_free_resources(adapter_t *);
static int megaraid_abort_handler(struct scsi_cmnd *);
-static int megaraid_reset_handler(struct scsi_cmnd *);
+static int megaraid_reset_handler(struct Scsi_Host *);
static int mbox_post_sync_cmd(adapter_t *, uint8_t []);
static int mbox_post_sync_cmd_fast(adapter_t *, uint8_t []);
@@ -2567,7 +2567,7 @@ static DEF_SCSI_QCMD(megaraid_queue_command)
* host.
**/
static int
-megaraid_reset_handler(struct scsi_cmnd *scp)
+megaraid_reset_handler(struct Scsi_Host *shost)
{
adapter_t *adapter;
scb_t *scb;
@@ -2581,7 +2581,7 @@ static DEF_SCSI_QCMD(megaraid_queue_command)
int i;
uioc_t *kioc;
- adapter = SCP2ADAPTER(scp);
+ adapter = (adapter_t *)SCSIHOST2ADAP(shost);
raid_dev = ADAP2RAIDDEV(adapter);
// return failure if adapter is not responding
@@ -2613,15 +2613,9 @@ static DEF_SCSI_QCMD(megaraid_queue_command)
megaraid_mbox_mm_done(adapter, scb);
} else {
- if (scb->scp == scp) { // Found command
- con_log(CL_ANN, (KERN_WARNING
- "megaraid: %d[%d:%d], reset from pending list\n",
- scb->sno, scb->dev_channel, scb->dev_target));
- } else {
- con_log(CL_ANN, (KERN_WARNING
+ con_log(CL_ANN, (KERN_WARNING
"megaraid: IO packet with %d[%d:%d] being reset\n",
scb->sno, scb->dev_channel, scb->dev_target));
- }
scb->scp->result = (DID_RESET << 16);
scb->scp->scsi_done(scb->scp);
@@ -2691,15 +2691,14 @@ static int megasas_wait_for_outstanding(struct megasas_instance *instance)
* reset requests. Device, bus and host specific reset handlers can use this
* function after they do their specific tasks.
*/
-static int megasas_generic_reset(struct scsi_cmnd *scmd)
+static int megasas_generic_reset(struct Scsi_Host *shost)
{
int ret_val;
struct megasas_instance *instance;
- instance = (struct megasas_instance *)scmd->device->host->hostdata;
+ instance = (struct megasas_instance *)shost->hostdata;
- scmd_printk(KERN_NOTICE, scmd, "megasas: RESET cmd=%x retries=%x\n",
- scmd->cmnd[0], scmd->retries);
+ shost_printk(KERN_NOTICE, shost, "megasas: RESET\n");
if (atomic_read(&instance->adprecovery) == MEGASAS_HW_CRITICAL_ERROR) {
dev_err(&instance->pdev->dev, "cannot recover from previous reset failures\n");
@@ -2768,34 +2767,29 @@ blk_eh_timer_return megasas_reset_timer(struct scsi_cmnd *scmd)
/**
* megasas_reset_bus_host - Bus & host reset handler entry point
*/
-static int megasas_reset_bus_host(struct scsi_cmnd *scmd)
+static int megasas_reset_bus_host(struct Scsi_Host *shost)
{
int ret;
struct megasas_instance *instance;
- instance = (struct megasas_instance *)scmd->device->host->hostdata;
+ instance = (struct megasas_instance *)shost->hostdata;
- scmd_printk(KERN_INFO, scmd,
+ shost_printk(KERN_INFO, shost,
"Controller reset is requested due to IO timeout\n"
- "SCSI command pointer: (%p)\t SCSI host state: %d\t"
+ "SCSI host state: %d\t"
" SCSI host busy: %d\t FW outstanding: %d\n",
- scmd, scmd->device->host->shost_state,
- atomic_read((atomic_t *)&scmd->device->host->host_busy),
+ shost->shost_state,
+ atomic_read(&shost->host_busy),
atomic_read(&instance->fw_outstanding));
/*
* First wait for all commands to complete
*/
if (instance->ctrl_context) {
- struct megasas_cmd_fusion *cmd;
- cmd = (struct megasas_cmd_fusion *)scmd->SCp.ptr;
- if (cmd)
- megasas_dump_frame(cmd->io_request,
- sizeof(struct MPI2_RAID_SCSI_IO_REQUEST));
- ret = megasas_reset_fusion(scmd->device->host,
+ ret = megasas_reset_fusion(shost,
SCSIIO_TIMEOUT_OCR);
} else
- ret = megasas_generic_reset(scmd);
+ ret = megasas_generic_reset(shost);
return ret;
}
@@ -1700,9 +1700,9 @@ static int mesh_abort(struct scsi_cmnd *cmd)
* The midlayer will wait for devices to come back, we don't need
* to do that ourselves
*/
-static int mesh_host_reset(struct scsi_cmnd *cmd)
+static int mesh_host_reset(struct Scsi_Host *shost)
{
- struct mesh_state *ms = (struct mesh_state *) cmd->device->host->hostdata;
+ struct mesh_state *ms = (struct mesh_state *) shost->hostdata;
volatile struct mesh_regs __iomem *mr = ms->mesh;
volatile struct dbdma_regs __iomem *md = ms->dma;
unsigned long flags;
@@ -1716,7 +1716,7 @@ static int mesh_host_reset(struct scsi_cmnd *cmd)
out_8(&mr->exception, 0xff); /* clear all exception bits */
out_8(&mr->error, 0xff); /* clear all error bits */
out_8(&mr->sequence, SEQ_RESETMESH);
- mesh_flush_io(mr);
+ mesh_flush_io(mr);
udelay(1);
out_8(&mr->intr_mask, INT_ERROR | INT_EXCEPTION | INT_CMDDONE);
out_8(&mr->source_id, ms->host->this_id);
@@ -1725,13 +1725,13 @@ static int mesh_host_reset(struct scsi_cmnd *cmd)
/* Reset the bus */
out_8(&mr->bus_status1, BS1_RST); /* assert RST */
- mesh_flush_io(mr);
+ mesh_flush_io(mr);
udelay(30); /* leave it on for >= 25us */
out_8(&mr->bus_status1, 0); /* negate RST */
/* Complete pending commands */
handle_reset(ms);
-
+
spin_unlock_irqrestore(ms->host->host_lock, flags);
return SUCCESS;
}
@@ -2643,14 +2643,13 @@ int mpt3sas_scsih_issue_locked_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
* Returns SUCCESS if command aborted else FAILED
*/
static int
-scsih_host_reset(struct scsi_cmnd *scmd)
+scsih_host_reset(struct Scsi_Host *shost)
{
- struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+ struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
int r, retval;
- pr_info(MPT3SAS_FMT "attempting host reset! scmd(%p)\n",
- ioc->name, scmd);
- scsi_print_command(scmd);
+ pr_info(MPT3SAS_FMT "attempting host reset!\n",
+ ioc->name);
if (ioc->is_driver_loading) {
pr_info(MPT3SAS_FMT "Blocking the host reset\n",
@@ -2662,8 +2661,8 @@ int mpt3sas_scsih_issue_locked_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
retval = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
r = (retval < 0) ? FAILED : SUCCESS;
out:
- pr_info(MPT3SAS_FMT "host reset: %s scmd(%p)\n",
- ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+ pr_info(MPT3SAS_FMT "host reset: %s\n",
+ ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"));
return r;
}
@@ -709,14 +709,13 @@ static int mvumi_reset_host_9143(struct mvumi_hba *mhba)
return mvumi_wait_for_outstanding(mhba);
}
-static int mvumi_host_reset(struct scsi_cmnd *scmd)
+static int mvumi_host_reset(struct Scsi_Host *shost)
{
struct mvumi_hba *mhba;
- mhba = (struct mvumi_hba *) scmd->device->host->hostdata;
+ mhba = (struct mvumi_hba *) shost->hostdata;
- scmd_printk(KERN_NOTICE, scmd, "RESET -%ld cmd=%x retries=%x\n",
- scmd->serial_number, scmd->cmnd[0], scmd->retries);
+ shost_printk(KERN_NOTICE, shost, "RESET\n");
return mhba->instancet->reset_host(mhba);
}
@@ -2885,23 +2885,21 @@ static void nsp32_do_bus_reset(nsp32_hw_data *data)
data->CurrentSC = NULL;
}
-static int nsp32_eh_host_reset(struct scsi_cmnd *SCpnt)
+static int nsp32_eh_host_reset(struct Scsi_Host *host)
{
- struct Scsi_Host *host = SCpnt->device->host;
- unsigned int base = SCpnt->device->host->io_port;
+ unsigned int base = host->io_port;
nsp32_hw_data *data = (nsp32_hw_data *)host->hostdata;
- nsp32_msg(KERN_INFO, "Host Reset");
- nsp32_dbg(NSP32_DEBUG_BUSRESET, "SCpnt=0x%x", SCpnt);
+ nsp32_msg(KERN_INFO, "Host Reset");
- spin_lock_irq(SCpnt->device->host->host_lock);
+ spin_lock_irq(host->host_lock);
nsp32hw_init(data);
nsp32_write2(base, IRQ_CONTROL, IRQ_CONTROL_ALL_IRQ_MASK);
nsp32_do_bus_reset(data);
nsp32_write2(base, IRQ_CONTROL, 0);
- spin_unlock_irq(SCpnt->device->host->host_lock);
+ spin_unlock_irq(host->host_lock);
return SUCCESS; /* Host reset is succeeded at any time. */
}
@@ -197,7 +197,7 @@ static int aha152x_resume(struct pcmcia_device *link)
{
scsi_info_t *info = link->priv;
- aha152x_host_reset_host(info->host);
+ aha152x_host_reset(info->host);
return 0;
}
@@ -1485,9 +1485,9 @@ static int nsp_eh_bus_reset(struct scsi_cmnd *SCpnt)
return nsp_bus_reset(data);
}
-static int nsp_eh_host_reset(struct scsi_cmnd *SCpnt)
+static int nsp_eh_host_reset(struct Scsi_Host *host)
{
- nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata;
+ nsp_hw_data *data = (nsp_hw_data *)host->hostdata;
nsp_dbg(NSP_DEBUG_BUSRESET, "in");
@@ -263,8 +263,8 @@ static int qlogic_resume(struct pcmcia_device *link)
outb(0x24, link->resource[0]->start + 0x9);
outb(0x04, link->resource[0]->start + 0xd);
}
- /* Ugggglllyyyy!!! */
- qlogicfas408_host_reset(NULL);
+
+ qlogicfas408_host_reset(info->host);
return 0;
}
@@ -586,14 +586,14 @@ enum Phase {
static DEF_SCSI_QCMD(SYM53C500_queue)
static int
-SYM53C500_host_reset(struct scsi_cmnd *SCpnt)
+SYM53C500_host_reset(struct Scsi_Host *shost)
{
- int port_base = SCpnt->device->host->io_port;
+ int port_base = shost->io_port;
DEB(printk("SYM53C500_host_reset called\n"));
- spin_lock_irq(SCpnt->device->host->host_lock);
+ spin_lock_irq(shost->host_lock);
SYM53C500_int_host_reset(port_base);
- spin_unlock_irq(SCpnt->device->host->host_lock);
+ spin_unlock_irq(shost->host_lock);
return SUCCESS;
}
@@ -3089,19 +3089,19 @@ static int pmcraid_eh_target_reset_handler(struct scsi_cmnd *scmd)
/**
* pmcraid_eh_host_reset_handler - adapter reset handler callback
*
- * @scmd: pointer to scsi_cmd that was sent to a resource of adapter
+ * @shost: pointer to scsi_host
*
* Initiates adapter reset to bring it up to operational state
*
* Return value
* SUCCESS or FAILED
*/
-static int pmcraid_eh_host_reset_handler(struct scsi_cmnd *scmd)
+static int pmcraid_eh_host_reset_handler(struct Scsi_Host *shost)
{
unsigned long interval = 10000; /* 10 seconds interval */
int waits = jiffies_to_msecs(PMCRAID_RESET_HOST_TIMEOUT) / interval;
struct pmcraid_instance *pinstance =
- (struct pmcraid_instance *)(scmd->device->host->hostdata);
+ (struct pmcraid_instance *)(shost->hostdata);
/* wait for an additional 150 seconds just in case firmware could come
@@ -857,11 +857,11 @@ static void ppa_reset_pulse(unsigned int base)
w_ctr(base, 0xc);
}
-static int ppa_reset(struct scsi_cmnd *cmd)
+static int ppa_reset(struct Scsi_Host *shost)
{
- ppa_struct *dev = ppa_dev(cmd->device->host);
+ ppa_struct *dev = ppa_dev(shost);
- if (cmd->SCp.phase)
+ if (dev->cur_cmd->SCp.phase)
ppa_disconnect(dev);
dev->cur_cmd = NULL; /* Forget the problem */
@@ -666,12 +666,12 @@ static void qedf_ctx_soft_reset(struct fc_lport *lport)
}
/* Reset the host by gracefully logging out and then logging back in */
-static int qedf_eh_host_reset(struct scsi_cmnd *sc_cmd)
+static int qedf_eh_host_reset(struct Scsi_Host *shost)
{
struct fc_lport *lport;
struct qedf_ctx *qedf;
- lport = shost_priv(sc_cmd->device->host);
+ lport = shost_priv(shost);
qedf = lport_priv(lport);
if (atomic_read(&qedf->link_state) == QEDF_LINK_DOWN ||
@@ -33,9 +33,8 @@ int qedi_recover_all_conns(struct qedi_ctx *qedi)
return SUCCESS;
}
-static int qedi_eh_host_reset(struct scsi_cmnd *cmd)
+static int qedi_eh_host_reset(struct Scsi_Host *shost)
{
- struct Scsi_Host *shost = cmd->device->host;
struct qedi_ctx *qedi;
qedi = iscsi_host_priv(shost);
@@ -1033,10 +1033,9 @@ static void qla1280_mailbox_timeout(unsigned long __data)
* Reset the specified adapter (both channels)
**************************************************************************/
static int
-qla1280_eh_adapter_reset(struct scsi_cmnd *cmd)
+qla1280_eh_adapter_reset(struct Scsi_Host *shost)
{
int rc;
- struct Scsi_Host *shost = cmd->device->host;
struct scsi_qla_host *ha = (struct scsi_qla_host *)shost->hostdata;
spin_lock_irq(shost->host_lock);
@@ -275,7 +275,7 @@
static int qla2xxx_eh_device_reset(struct scsi_cmnd *);
static int qla2xxx_eh_target_reset(struct scsi_cmnd *);
static int qla2xxx_eh_bus_reset(struct scsi_cmnd *);
-static int qla2xxx_eh_host_reset(struct scsi_cmnd *);
+static int qla2xxx_eh_host_reset(struct Scsi_Host *);
static void qla2x00_clear_drv_active(struct qla_hw_data *);
static void qla2x00_free_device(scsi_qla_host_t *);
@@ -1550,8 +1550,7 @@ uint32_t qla2x00_isp_reg_stat(struct qla_hw_data *ha)
* The reset function will reset the Adapter.
*
* Input:
-* cmd = Linux SCSI command packet of the command that cause the
-* adapter reset.
+* shost = Linux SCSI host to be reset
*
* Returns:
* Either SUCCESS or FAILED.
@@ -1559,13 +1558,11 @@ uint32_t qla2x00_isp_reg_stat(struct qla_hw_data *ha)
* Note:
**************************************************************************/
static int
-qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
+qla2xxx_eh_host_reset(struct Scsi_Host *shost)
{
- scsi_qla_host_t *vha = shost_priv(cmd->device->host);
+ scsi_qla_host_t *vha = shost_priv(shost);
struct qla_hw_data *ha = vha->hw;
int ret = FAILED;
- unsigned int id;
- uint64_t lun;
scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
if (qla2x00_isp_reg_stat(ha)) {
@@ -1575,11 +1572,8 @@ uint32_t qla2x00_isp_reg_stat(struct qla_hw_data *ha)
return SUCCESS;
}
- id = cmd->device->id;
- lun = cmd->device->lun;
-
ql_log(ql_log_info, vha, 0x8018,
- "ADAPTER RESET ISSUED nexus=%ld:%d:%llu.\n", vha->host_no, id, lun);
+ "ADAPTER RESET ISSUED host=%ld.\n", vha->host_no);
/*
* No point in issuing another reset if one is active. Also do not
@@ -1625,8 +1619,8 @@ uint32_t qla2x00_isp_reg_stat(struct qla_hw_data *ha)
eh_host_reset_lock:
ql_log(ql_log_info, vha, 0x8017,
- "ADAPTER RESET %s nexus=%ld:%d:%llu.\n",
- (ret == FAILED) ? "FAILED" : "SUCCEEDED", vha->host_no, id, lun);
+ "ADAPTER RESET %s host=%ld.\n",
+ (ret == FAILED) ? "FAILED" : "SUCCEEDED", vha->host_no);
return ret;
}
@@ -160,7 +160,7 @@ static int qla4xxx_set_chap_entry(struct Scsi_Host *shost, void *data,
static int qla4xxx_eh_abort(struct scsi_cmnd *cmd);
static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd);
static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd);
-static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd);
+static int qla4xxx_eh_host_reset(struct Scsi_Host *shost);
static int qla4xxx_slave_alloc(struct scsi_device *device);
static umode_t qla4_attr_is_visible(int param_type, int param);
static int qla4xxx_host_reset(struct Scsi_Host *shost, int reset_type);
@@ -9367,17 +9367,17 @@ static int qla4xxx_is_eh_active(struct Scsi_Host *shost)
/**
* qla4xxx_eh_host_reset - kernel callback
- * @cmd: Pointer to Linux's SCSI command structure
+ * @host: Pointer to Linux's SCSI host structure
*
* This routine is invoked by the Linux kernel to perform fatal error
* recovery on the specified adapter.
**/
-static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd)
+static int qla4xxx_eh_host_reset(struct Scsi_Host *host)
{
int return_status = FAILED;
struct scsi_qla_host *ha;
- ha = to_qla_host(cmd->device->host);
+ ha = to_qla_host(host);
if ((is_qla8032(ha) || is_qla8042(ha)) && ql4xdontresethba)
qla4_83xx_set_idc_dontreset(ha);
@@ -9393,20 +9393,18 @@ static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd)
ha->host_no, __func__));
/* Clear outstanding srb in queues */
- if (qla4xxx_is_eh_active(cmd->device->host))
+ if (qla4xxx_is_eh_active(host))
qla4xxx_abort_active_cmds(ha, DID_ABORT << 16);
return FAILED;
}
ql4_printk(KERN_INFO, ha,
- "scsi(%ld:%d:%d:%llu): HOST RESET ISSUED.\n", ha->host_no,
- cmd->device->channel, cmd->device->id, cmd->device->lun);
+ "scsi%ld: HOST RESET ISSUED.\n", ha->host_no);
if (qla4xxx_wait_for_hba_online(ha) != QLA_SUCCESS) {
- DEBUG2(printk("scsi%ld:%d: %s: Unable to reset host. Adapter "
- "DEAD.\n", ha->host_no, cmd->device->channel,
- __func__));
+ DEBUG2(printk("scsi%ld: %s: Unable to reset host. Adapter "
+ "DEAD.\n", ha->host_no, __func__));
return FAILED;
}
@@ -498,20 +498,18 @@ int qlogicfas408_abort(struct scsi_cmnd *cmd)
/*
* Reset SCSI bus
- * FIXME: This function is invoked with cmd = NULL directly by
- * the PCMCIA qlogic_stub code. This wants fixing
*/
-int qlogicfas408_host_reset(struct scsi_cmnd *cmd)
+int qlogicfas408_host_reset(struct Scsi_Host *host)
{
- struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
+ struct qlogicfas408_priv *priv = get_priv_by_host(host);
unsigned long flags;
priv->qabort = 2;
- spin_lock_irqsave(cmd->device->host->host_lock, flags);
+ spin_lock_irqsave(host->host_lock, flags);
ql_zap(priv);
- spin_unlock_irqrestore(cmd->device->host->host_lock, flags);
+ spin_unlock_irqrestore(host->host_lock, flags);
return SUCCESS;
}
@@ -108,7 +108,7 @@ int qlogicfas408_biosparam(struct scsi_device * disk,
struct block_device *dev,
sector_t capacity, int ip[]);
int qlogicfas408_abort(struct scsi_cmnd * cmd);
-extern int qlogicfas408_host_reset(struct scsi_cmnd *cmd);
+extern int qlogicfas408_host_reset(struct Scsi_Host *host);
const char *qlogicfas408_info(struct Scsi_Host *host);
int qlogicfas408_get_chip_type(int qbase, int int_type);
void qlogicfas408_setup(int qbase, int id, int int_type);
@@ -3878,27 +3878,27 @@ static int scsi_debug_bus_reset(struct scsi_cmnd * SCpnt)
return SUCCESS;
}
-static int scsi_debug_host_reset(struct scsi_cmnd * SCpnt)
+static int scsi_debug_host_reset(struct Scsi_Host * shost)
{
struct sdebug_host_info * sdbg_host;
struct sdebug_dev_info *devip;
int k = 0;
++num_host_resets;
- if ((SCpnt->device) && (SDEBUG_OPT_ALL_NOISE & sdebug_opts))
- sdev_printk(KERN_INFO, SCpnt->device, "%s\n", __func__);
- spin_lock(&sdebug_host_list_lock);
- list_for_each_entry(sdbg_host, &sdebug_host_list, host_list) {
+ if (SDEBUG_OPT_ALL_NOISE & sdebug_opts)
+ shost_printk(KERN_INFO, shost, "%s\n", __func__);
+ spin_lock(&sdebug_host_list_lock);
+ list_for_each_entry(sdbg_host, &sdebug_host_list, host_list) {
list_for_each_entry(devip, &sdbg_host->dev_info_list,
dev_list) {
set_bit(SDEBUG_UA_BUS_RESET, devip->uas_bm);
++k;
}
- }
- spin_unlock(&sdebug_host_list_lock);
+ }
+ spin_unlock(&sdebug_host_list_lock);
stop_all_queued();
if (SDEBUG_OPT_RESET_NOISE & sdebug_opts)
- sdev_printk(KERN_INFO, SCpnt->device,
+ shost_printk(KERN_INFO, shost,
"%s: %d device(s) found\n", __func__, k);
return SUCCESS;
}
@@ -745,7 +745,7 @@ static int scsi_try_host_reset(struct scsi_cmnd *scmd)
if (!hostt->eh_host_reset_handler)
return FAILED;
- rtn = hostt->eh_host_reset_handler(scmd);
+ rtn = hostt->eh_host_reset_handler(host);
if (rtn == SUCCESS) {
if (!hostt->skip_settle_delay)
@@ -380,8 +380,7 @@ struct snic_global {
int snic_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
int snic_abort_cmd(struct scsi_cmnd *);
int snic_device_reset(struct scsi_cmnd *);
-int snic_host_reset(struct scsi_cmnd *);
-int snic_reset(struct Scsi_Host *);
+int snic_host_reset(struct Scsi_Host *);
void snic_shutdown_scsi_cleanup(struct snic *);
@@ -2307,8 +2307,15 @@
return ret;
} /* end of snic_issue_hba_reset */
+/*
+ * SCSI Error handling calls driver's eh_host_reset if all prior
+ * error handling levels return FAILED.
+ *
+ * Host Reset is the highest level of error recovery. If this fails, then
+ * host is offlined by SCSI.
+ */
int
-snic_reset(struct Scsi_Host *shost)
+snic_host_reset(struct Scsi_Host *shost)
{
struct snic *snic = shost_priv(shost);
struct scsi_cmnd *sc = NULL;
@@ -2373,26 +2380,6 @@
0, 0, 0);
return ret;
-} /* end of snic_reset */
-
-/*
- * SCSI Error handling calls driver's eh_host_reset if all prior
- * error handling levels return FAILED.
- *
- * Host Reset is the highest level of error recovery. If this fails, then
- * host is offlined by SCSI.
- */
-int
-snic_host_reset(struct scsi_cmnd *sc)
-{
- struct Scsi_Host *shost = sc->device->host;
-
- SNIC_SCSI_DBG(shost,
- "host reset:sc %p sc_cmd 0x%x req %p tag %d flags 0x%llx\n",
- sc, sc->cmnd[0], sc->request,
- snic_cmd_tag(sc), CMD_FLAGS(sc));
-
- return snic_reset(shost);
} /* end of snic_host_reset */
/*
@@ -1441,14 +1441,13 @@ static int stex_do_reset(struct st_hba *hba)
return -1;
}
-static int stex_reset(struct scsi_cmnd *cmd)
+static int stex_reset(struct Scsi_Host *shost)
{
struct st_hba *hba;
- hba = (struct st_hba *) &cmd->device->host->hostdata[0];
+ hba = (struct st_hba *) &shost->hostdata[0];
- shost_printk(KERN_INFO, cmd->device->host,
- "resetting host\n");
+ shost_printk(KERN_INFO, shost, "resetting host\n");
return stex_do_reset(hba) ? FAILED : SUCCESS;
}
@@ -1437,9 +1437,9 @@ static int storvsc_get_chs(struct scsi_device *sdev, struct block_device * bdev,
return 0;
}
-static int storvsc_host_reset_handler(struct scsi_cmnd *scmnd)
+static int storvsc_host_reset_handler(struct Scsi_Host *shost)
{
- struct hv_host_device *host_dev = shost_priv(scmnd->device->host);
+ struct hv_host_device *host_dev = shost_priv(shost);
struct hv_device *device = host_dev->dev;
struct storvsc_device *stor_device;
@@ -723,12 +723,9 @@ const char *sym53c416_info(struct Scsi_Host *SChost)
int i;
int base = SChost->io_port;
int irq = SChost->irq;
- int scsi_id = 0;
+ int scsi_id = SChost->this_id;
int rev = inb(base + TC_HIGH);
- for(i = 0; i < host_index; i++)
- if(hosts[i].base == base)
- scsi_id = hosts[i].scsi_id;
sprintf(info, "Symbios Logic 53c416 (rev. %d) at 0x%03x, irq %d, SCSI-ID %d, %s pio", rev, base, irq, scsi_id, (fastpio)? "fast" : "slow");
return info;
}
@@ -762,21 +759,18 @@ static int sym53c416_queuecommand_lck(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *
DEF_SCSI_QCMD(sym53c416_queuecommand)
-static int sym53c416_host_reset(Scsi_Cmnd *SCpnt)
+static int sym53c416_host_reset(struct Scsi_Host *SChost)
{
int base;
- int scsi_id = -1;
+ int scsi_id;
int i;
unsigned long flags;
spin_lock_irqsave(&sym53c416_lock, flags);
/* printk("sym53c416_reset\n"); */
- base = SCpnt->device->host->io_port;
- /* search scsi_id - fixme, we shouldn't need to iterate for this! */
- for(i = 0; i < host_index && scsi_id == -1; i++)
- if(hosts[i].base == base)
- scsi_id = hosts[i].scsi_id;
+ base = SChost->io_port;
+ scsi_id = SChost->this_id;
outb(RESET_CHIP, base + COMMAND_REG);
outb(NOOP | PIO_MODE, base + COMMAND_REG);
outb(RESET_SCSI_BUS, base + COMMAND_REG);
@@ -687,9 +687,8 @@ static int sym53c8xx_eh_bus_reset_handler(struct scsi_cmnd *cmd)
return SCSI_SUCCESS;
}
-static int sym53c8xx_eh_host_reset_handler(struct scsi_cmnd *cmd)
+static int sym53c8xx_eh_host_reset_handler(struct Scsi_Host *shost)
{
- struct Scsi_Host *shost = cmd->device->host;
struct sym_data *sym_data = shost_priv(shost);
struct pci_dev *pdev = sym_data->pdev;
struct sym_hcb *np = sym_data->ncb;
@@ -214,7 +214,7 @@ enum {
static void ufshcd_tmc_handler(struct ufs_hba *hba);
static void ufshcd_async_scan(void *data, async_cookie_t cookie);
static int ufshcd_reset_and_restore(struct ufs_hba *hba);
-static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd);
+static int ufshcd_eh_host_reset_handler(struct Scsi_Host *shost);
static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag);
static void ufshcd_hba_exit(struct ufs_hba *hba);
static int ufshcd_probe_hba(struct ufs_hba *hba);
@@ -5585,7 +5585,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
* handling stage: reset and restore.
*/
if (lrbp->lun == UFS_UPIU_UFS_DEVICE_WLUN)
- return ufshcd_eh_host_reset_handler(cmd);
+ return ufshcd_eh_host_reset_handler(host);
ufshcd_hold(hba, false);
reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
@@ -5791,13 +5791,13 @@ static int ufshcd_reset_and_restore(struct ufs_hba *hba)
*
* Returns SUCCESS/FAILED
*/
-static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd)
+static int ufshcd_eh_host_reset_handler(struct Scsi_Host *shost)
{
int err;
unsigned long flags;
struct ufs_hba *hba;
- hba = shost_priv(cmd->device->host);
+ hba = shost_priv(shost);
ufshcd_hold(hba, false);
/*
@@ -873,14 +873,13 @@ static void pvscsi_reset_all(struct pvscsi_adapter *adapter)
}
}
-static int pvscsi_host_reset(struct scsi_cmnd *cmd)
+static int pvscsi_host_reset(struct Scsi_Host *host)
{
- struct Scsi_Host *host = cmd->device->host;
struct pvscsi_adapter *adapter = shost_priv(host);
unsigned long flags;
bool use_msg;
- scmd_printk(KERN_INFO, cmd, "SCSI Host reset\n");
+ shost_printk(KERN_INFO, host, "SCSI Host reset\n");
spin_lock_irqsave(&adapter->hw_lock, flags);
@@ -1571,13 +1571,11 @@
}
int
-wd33c93_host_reset(struct scsi_cmnd * SCpnt)
+wd33c93_host_reset(struct Scsi_Host * instance)
{
- struct Scsi_Host *instance;
struct WD33C93_hostdata *hostdata;
int i;
- instance = SCpnt->device->host;
spin_lock_irq(instance->host_lock);
hostdata = (struct WD33C93_hostdata *) instance->hostdata;
@@ -347,6 +347,6 @@ void wd33c93_init (struct Scsi_Host *instance, const wd33c93_regs regs,
void wd33c93_intr (struct Scsi_Host *instance);
int wd33c93_show_info(struct seq_file *, struct Scsi_Host *);
int wd33c93_write_info(struct Scsi_Host *, char *, int);
-int wd33c93_host_reset (struct scsi_cmnd *);
+int wd33c93_host_reset (struct Scsi_Host *);
#endif /* WD33C93_H */
@@ -510,9 +510,9 @@ static int wd719x_bus_reset(struct scsi_cmnd *cmd)
return wd719x_reset(cmd, WD719X_CMD_BUSRESET, 0);
}
-static int wd719x_host_reset(struct scsi_cmnd *cmd)
+static int wd719x_host_reset(struct Scsi_Host *host)
{
- struct wd719x *wd = shost_priv(cmd->device->host);
+ struct wd719x *wd = shost_priv(host);
struct wd719x_scb *scb, *tmp;
unsigned long flags;
int result;
@@ -437,13 +437,13 @@ static int visorhba_bus_reset_handler(struct scsi_cmnd *scsicmd)
/*
* visorhba_host_reset_handler - Not supported
- * @scsicmd: The scsicmd that needs aborted
+ * @shost: The scsi host that needs resetting
*
* Not supported, return SUCCESS
* Returns SUCCESS
*/
static int
-visorhba_host_reset_handler(struct scsi_cmnd *scsicmd)
+visorhba_host_reset_handler(struct Scsi_Host *shost)
{
/* issue TASK_MGMT_TARGET_RESET for each target on each bus for host */
return SUCCESS;
@@ -344,9 +344,9 @@ static int mts_scsi_abort(struct scsi_cmnd *srb)
return FAILED;
}
-static int mts_scsi_host_reset(struct scsi_cmnd *srb)
+static int mts_scsi_host_reset(struct Scsi_Host *shost)
{
- struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]);
+ struct mts_desc* desc = (struct mts_desc*)(shost->hostdata[0]);
int result;
MTS_DEBUG_GOT_HERE();
@@ -953,7 +953,7 @@ static inline struct fc_lport *fc_disc_lport(struct fc_disc *disc)
int fc_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
int fc_eh_abort(struct scsi_cmnd *);
int fc_eh_device_reset(struct scsi_cmnd *);
-int fc_eh_host_reset(struct scsi_cmnd *);
+int fc_eh_host_reset(struct Scsi_Host *);
int fc_slave_alloc(struct scsi_device *);
/*
@@ -148,7 +148,7 @@ struct scsi_host_template {
int (* eh_device_reset_handler)(struct scsi_cmnd *);
int (* eh_target_reset_handler)(struct scsi_cmnd *);
int (* eh_bus_reset_handler)(struct scsi_cmnd *);
- int (* eh_host_reset_handler)(struct scsi_cmnd *);
+ int (* eh_host_reset_handler)(struct Scsi_Host *);
/*
* Before the mid layer attempts to scan for a new device where none
Issuing a host reset should not rely on any commands. So use Scsi_Host as argument for eh_host_reset_handler. Signed-off-by: Hannes Reinecke <hare@suse.de> --- Documentation/scsi/scsi_eh.txt | 2 +- Documentation/scsi/scsi_mid_low_api.txt | 4 +-- arch/ia64/hp/sim/simscsi.c | 2 +- drivers/infiniband/ulp/srp/ib_srp.c | 6 ++-- drivers/message/fusion/mptscsih.c | 21 +++++++------ drivers/message/fusion/mptscsih.h | 2 +- drivers/s390/scsi/zfcp_scsi.c | 3 +- drivers/scsi/3w-9xxx.c | 11 +++---- drivers/scsi/3w-sas.c | 11 +++---- drivers/scsi/3w-xxxx.c | 11 ++++--- drivers/scsi/53c700.c | 39 +++++++++++++------------ drivers/scsi/BusLogic.c | 14 +++------ drivers/scsi/NCR5380.c | 5 ++-- drivers/scsi/NCR53c406a.c | 6 ++-- drivers/scsi/aacraid/linit.c | 6 ++-- drivers/scsi/advansys.c | 26 +++++++++-------- drivers/scsi/aha152x.c | 11 +------ drivers/scsi/aha152x.h | 2 +- drivers/scsi/aha1542.c | 17 +++++------ drivers/scsi/arm/fas216.c | 4 +-- drivers/scsi/arm/fas216.h | 6 ++-- drivers/scsi/atari_scsi.c | 4 +-- drivers/scsi/cxlflash/main.c | 13 ++------- drivers/scsi/dpt_i2o.c | 14 ++++----- drivers/scsi/dpti.h | 2 +- drivers/scsi/eata.c | 10 ++----- drivers/scsi/eata_pio.c | 29 +++++++++--------- drivers/scsi/esas2r/esas2r.h | 2 +- drivers/scsi/esas2r/esas2r_main.c | 16 +++++----- drivers/scsi/esp_scsi.c | 4 +-- drivers/scsi/fdomain.c | 2 +- drivers/scsi/fdomain.h | 2 +- drivers/scsi/fnic/fnic.h | 2 +- drivers/scsi/fnic/fnic_scsi.c | 3 +- drivers/scsi/hptiop.c | 6 ++-- drivers/scsi/ibmvscsi/ibmvfc.c | 4 +-- drivers/scsi/ibmvscsi/ibmvscsi.c | 4 +-- drivers/scsi/imm.c | 6 ++-- drivers/scsi/ipr.c | 4 +-- drivers/scsi/ips.c | 23 +++++---------- drivers/scsi/libfc/fc_fcp.c | 5 ++-- drivers/scsi/lpfc/lpfc_scsi.c | 3 +- drivers/scsi/mac53c94.c | 8 ++--- drivers/scsi/megaraid.c | 4 +-- drivers/scsi/megaraid.h | 2 +- drivers/scsi/megaraid/megaraid_mbox.c | 14 +++------ drivers/scsi/megaraid/megaraid_sas_base.c | 28 +++++++----------- drivers/scsi/mesh.c | 10 +++---- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 13 ++++----- drivers/scsi/mvumi.c | 7 ++--- drivers/scsi/nsp32.c | 12 ++++---- drivers/scsi/pcmcia/aha152x_stub.c | 2 +- drivers/scsi/pcmcia/nsp_cs.c | 4 +-- drivers/scsi/pcmcia/qlogic_stub.c | 4 +-- drivers/scsi/pcmcia/sym53c500_cs.c | 8 ++--- drivers/scsi/pmcraid.c | 6 ++-- drivers/scsi/ppa.c | 6 ++-- drivers/scsi/qedf/qedf_main.c | 4 +-- drivers/scsi/qedi/qedi_iscsi.c | 3 +- drivers/scsi/qla1280.c | 3 +- drivers/scsi/qla2xxx/qla_os.c | 20 +++++-------- drivers/scsi/qla4xxx/ql4_os.c | 18 +++++------- drivers/scsi/qlogicfas408.c | 10 +++---- drivers/scsi/qlogicfas408.h | 2 +- drivers/scsi/scsi_debug.c | 16 +++++----- drivers/scsi/scsi_error.c | 2 +- drivers/scsi/snic/snic.h | 3 +- drivers/scsi/snic/snic_scsi.c | 29 +++++------------- drivers/scsi/stex.c | 7 ++--- drivers/scsi/storvsc_drv.c | 4 +-- drivers/scsi/sym53c416.c | 16 ++++------ drivers/scsi/sym53c8xx_2/sym_glue.c | 3 +- drivers/scsi/ufs/ufshcd.c | 8 ++--- drivers/scsi/vmw_pvscsi.c | 5 ++-- drivers/scsi/wd33c93.c | 4 +-- drivers/scsi/wd33c93.h | 2 +- drivers/scsi/wd719x.c | 4 +-- drivers/staging/unisys/visorhba/visorhba_main.c | 4 +-- drivers/usb/image/microtek.c | 4 +-- include/scsi/libfc.h | 2 +- include/scsi/scsi_host.h | 2 +- 81 files changed, 290 insertions(+), 380 deletions(-)