diff mbox

[1/2] Drop legacy megaraid controller

Message ID 1498820754-51032-2-git-send-email-hare@suse.de (mailing list archive)
State Changes Requested, archived
Headers show

Commit Message

Hannes Reinecke June 30, 2017, 11:05 a.m. UTC
The hardware is ancient, and support for most cards has been moved
to megaraid_mbox. So drop it.

Signed-off-by: Hannes Reinecke <hare@suse.com>
---
 MAINTAINERS                            |    1 -
 drivers/scsi/Makefile                  |    1 -
 drivers/scsi/megaraid.c                | 4730 --------------------------------
 drivers/scsi/megaraid.h                | 1010 -------
 drivers/scsi/megaraid/Kconfig.megaraid |   11 -
 5 files changed, 5753 deletions(-)
 delete mode 100644 drivers/scsi/megaraid.c
 delete mode 100644 drivers/scsi/megaraid.h

Comments

Christoph Hellwig June 30, 2017, 5:33 p.m. UTC | #1
On Fri, Jun 30, 2017 at 01:05:53PM +0200, Hannes Reinecke wrote:
> The hardware is ancient, and support for most cards has been moved
> to megaraid_mbox. So drop it.


This seems to drop support for the PCI_DEVICE_ID_AMI_MEGARAID
and PCI_DEVICE_ID_AMI_MEGARAID2 cards.  Do we have any suggestions
this code is so broken to not care anymore? Is there any reason why
they can't just work with the megaraid_mbox driver?
Hannes Reinecke June 30, 2017, 6:15 p.m. UTC | #2
On 06/30/2017 07:33 PM, Christoph Hellwig wrote:
> On Fri, Jun 30, 2017 at 01:05:53PM +0200, Hannes Reinecke wrote:
>> The hardware is ancient, and support for most cards has been moved
>> to megaraid_mbox. So drop it.
> 
> 
> This seems to drop support for the PCI_DEVICE_ID_AMI_MEGARAID
> and PCI_DEVICE_ID_AMI_MEGARAID2 cards.  Do we have any suggestions
> this code is so broken to not care anymore? Is there any reason why
> they can't just work with the megaraid_mbox driver?
> 
Hmm. Probably no good reason at all.
I'll check which version I have here.

Cheers,

Hannes
Sumit Saxena July 3, 2017, 7:50 a.m. UTC | #3
>-----Original Message-----
>From: Hannes Reinecke [mailto:hare@suse.de]
>Sent: Friday, June 30, 2017 11:46 PM
>To: Christoph Hellwig
>Cc: Martin K. Petersen; James Bottomley; Kashyap Desai; Sumit Saxena;
>linux-
>scsi@vger.kernel.org; Hannes Reinecke
>Subject: Re: [PATCH 1/2] Drop legacy megaraid controller
>
>On 06/30/2017 07:33 PM, Christoph Hellwig wrote:
>> On Fri, Jun 30, 2017 at 01:05:53PM +0200, Hannes Reinecke wrote:
>>> The hardware is ancient, and support for most cards has been moved to
>>> megaraid_mbox. So drop it.
>>
>>
>> This seems to drop support for the PCI_DEVICE_ID_AMI_MEGARAID and
>> PCI_DEVICE_ID_AMI_MEGARAID2 cards.  Do we have any suggestions this
>> code is so broken to not care anymore? Is there any reason why they
>> can't just work with the megaraid_mbox driver?
>>
>Hmm. Probably no good reason at all.
>I'll check which version I have here.

Hannes,
We are willing to keep only megaraid_sas driver and intent is rest of
megaraid* drivers
(it includes megaraid, megaraid_mm, megaraid_mbox) should be removed.
Broadcom(LSI) has stopped supporting hardware associated with these old
drivers.

Thanks,
Sumit
>
>Cheers,
>
>Hannes
>--
>Dr. Hannes Reinecke		   Teamlead Storage & Networking
>hare@suse.de			               +49 911 74053 688
>SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
>GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton HRB 21284
>(AG Nürnberg)
Hannes Reinecke July 4, 2017, 3:09 p.m. UTC | #4
On 07/03/2017 09:50 AM, Sumit Saxena wrote:
>> -----Original Message-----
>> From: Hannes Reinecke [mailto:hare@suse.de]
>> Sent: Friday, June 30, 2017 11:46 PM
>> To: Christoph Hellwig
>> Cc: Martin K. Petersen; James Bottomley; Kashyap Desai; Sumit Saxena;
>> linux-
>> scsi@vger.kernel.org; Hannes Reinecke
>> Subject: Re: [PATCH 1/2] Drop legacy megaraid controller
>>
>> On 06/30/2017 07:33 PM, Christoph Hellwig wrote:
>>> On Fri, Jun 30, 2017 at 01:05:53PM +0200, Hannes Reinecke wrote:
>>>> The hardware is ancient, and support for most cards has been moved to
>>>> megaraid_mbox. So drop it.
>>>
>>>
>>> This seems to drop support for the PCI_DEVICE_ID_AMI_MEGARAID and
>>> PCI_DEVICE_ID_AMI_MEGARAID2 cards.  Do we have any suggestions this
>>> code is so broken to not care anymore? Is there any reason why they
>>> can't just work with the megaraid_mbox driver?
>>>
>> Hmm. Probably no good reason at all.
>> I'll check which version I have here.
> 
> Hannes,
> We are willing to keep only megaraid_sas driver and intent is rest of
> megaraid* drivers
> (it includes megaraid, megaraid_mm, megaraid_mbox) should be removed.
> Broadcom(LSI) has stopped supporting hardware associated with these old
> drivers.
> 
I'd be willing to take over maintainership of the old megaraid_mbox
driver; I'm working on moving PIO support into the megaraid_mbox code,
and with that we can drop the old megaraid.c driver.

Cheers,

Hannes
diff mbox

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 09b5ab6..0ab2205 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8284,7 +8284,6 @@  L:	linux-scsi@vger.kernel.org
 W:	http://www.avagotech.com/support/
 S:	Maintained
 F:	Documentation/scsi/megaraid.txt
-F:	drivers/scsi/megaraid.*
 F:	drivers/scsi/megaraid/
 
 MELFAS MIP4 TOUCHSCREEN DRIVER
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 93dbe58..3eb4552 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -97,7 +97,6 @@  obj-$(CONFIG_SCSI_EATA)		+= eata.o
 obj-$(CONFIG_SCSI_DC395x)	+= dc395x.o
 obj-$(CONFIG_SCSI_AM53C974)	+= esp_scsi.o	am53c974.o
 obj-$(CONFIG_CXLFLASH)		+= cxlflash/
-obj-$(CONFIG_MEGARAID_LEGACY)	+= megaraid.o
 obj-$(CONFIG_MEGARAID_NEWGEN)	+= megaraid/
 obj-$(CONFIG_MEGARAID_SAS)	+= megaraid/
 obj-$(CONFIG_SCSI_MPT3SAS)	+= mpt3sas/
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
deleted file mode 100644
index 3c63c29..0000000
--- a/drivers/scsi/megaraid.c
+++ /dev/null
@@ -1,4730 +0,0 @@ 
-/*
- *
- *			Linux MegaRAID device driver
- *
- * Copyright (c) 2002  LSI Logic Corporation.
- *
- *	   This program is free software; you can redistribute it and/or
- *	   modify it under the terms of the GNU General Public License
- *	   as published by the Free Software Foundation; either version
- *	   2 of the License, or (at your option) any later version.
- *
- * Copyright (c) 2002  Red Hat, Inc. All rights reserved.
- *	  - fixes
- *	  - speed-ups (list handling fixes, issued_list, optimizations.)
- *	  - lots of cleanups.
- *
- * Copyright (c) 2003  Christoph Hellwig  <hch@lst.de>
- *	  - new-style, hotplug-aware pci probing and scsi registration
- *
- * Version : v2.00.4 Mon Nov 14 14:02:43 EST 2005 - Seokmann Ju
- * 						<Seokmann.Ju@lsil.com>
- *
- * Description: Linux device driver for LSI Logic MegaRAID controller
- *
- * Supported controllers: MegaRAID 418, 428, 438, 466, 762, 467, 471, 490, 493
- *					518, 520, 531, 532
- *
- * This driver is supported by LSI Logic, with assistance from Red Hat, Dell,
- * and others. Please send updates to the mailing list
- * linux-scsi@vger.kernel.org .
- *
- */
-
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/blkdev.h>
-#include <linux/uaccess.h>
-#include <asm/io.h>
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/reboot.h>
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-#include <scsi/scsicam.h>
-
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-
-#include "megaraid.h"
-
-#define MEGARAID_MODULE_VERSION "2.00.4"
-
-MODULE_AUTHOR ("sju@lsil.com");
-MODULE_DESCRIPTION ("LSI Logic MegaRAID legacy driver");
-MODULE_LICENSE ("GPL");
-MODULE_VERSION(MEGARAID_MODULE_VERSION);
-
-static DEFINE_MUTEX(megadev_mutex);
-static unsigned int max_cmd_per_lun = DEF_CMD_PER_LUN;
-module_param(max_cmd_per_lun, uint, 0);
-MODULE_PARM_DESC(max_cmd_per_lun, "Maximum number of commands which can be issued to a single LUN (default=DEF_CMD_PER_LUN=63)");
-
-static unsigned short int max_sectors_per_io = MAX_SECTORS_PER_IO;
-module_param(max_sectors_per_io, ushort, 0);
-MODULE_PARM_DESC(max_sectors_per_io, "Maximum number of sectors per I/O request (default=MAX_SECTORS_PER_IO=128)");
-
-
-static unsigned short int max_mbox_busy_wait = MBOX_BUSY_WAIT;
-module_param(max_mbox_busy_wait, ushort, 0);
-MODULE_PARM_DESC(max_mbox_busy_wait, "Maximum wait for mailbox in microseconds if busy (default=MBOX_BUSY_WAIT=10)");
-
-#define RDINDOOR(adapter)	readl((adapter)->mmio_base + 0x20)
-#define RDOUTDOOR(adapter)	readl((adapter)->mmio_base + 0x2C)
-#define WRINDOOR(adapter,value)	 writel(value, (adapter)->mmio_base + 0x20)
-#define WROUTDOOR(adapter,value) writel(value, (adapter)->mmio_base + 0x2C)
-
-/*
- * Global variables
- */
-
-static int hba_count;
-static adapter_t *hba_soft_state[MAX_CONTROLLERS];
-static struct proc_dir_entry *mega_proc_dir_entry;
-
-/* For controller re-ordering */
-static struct mega_hbas mega_hbas[MAX_CONTROLLERS];
-
-static long
-megadev_unlocked_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
-
-/*
- * The File Operations structure for the serial/ioctl interface of the driver
- */
-static const struct file_operations megadev_fops = {
-	.owner		= THIS_MODULE,
-	.unlocked_ioctl	= megadev_unlocked_ioctl,
-	.open		= megadev_open,
-	.llseek		= noop_llseek,
-};
-
-/*
- * Array to structures for storing the information about the controllers. This
- * information is sent to the user level applications, when they do an ioctl
- * for this information.
- */
-static struct mcontroller mcontroller[MAX_CONTROLLERS];
-
-/* The current driver version */
-static u32 driver_ver = 0x02000000;
-
-/* major number used by the device for character interface */
-static int major;
-
-#define IS_RAID_CH(hba, ch)	(((hba)->mega_ch_class >> (ch)) & 0x01)
-
-
-/*
- * Debug variable to print some diagnostic messages
- */
-static int trace_level;
-
-/**
- * mega_setup_mailbox()
- * @adapter - pointer to our soft state
- *
- * Allocates a 8 byte aligned memory for the handshake mailbox.
- */
-static int
-mega_setup_mailbox(adapter_t *adapter)
-{
-	unsigned long	align;
-
-	adapter->una_mbox64 = pci_alloc_consistent(adapter->dev,
-			sizeof(mbox64_t), &adapter->una_mbox64_dma);
-
-	if( !adapter->una_mbox64 ) return -1;
-		
-	adapter->mbox = &adapter->una_mbox64->mbox;
-
-	adapter->mbox = (mbox_t *)((((unsigned long) adapter->mbox) + 15) &
-			(~0UL ^ 0xFUL));
-
-	adapter->mbox64 = (mbox64_t *)(((unsigned long)adapter->mbox) - 8);
-
-	align = ((void *)adapter->mbox) - ((void *)&adapter->una_mbox64->mbox);
-
-	adapter->mbox_dma = adapter->una_mbox64_dma + 8 + align;
-
-	/*
-	 * Register the mailbox if the controller is an io-mapped controller
-	 */
-	if( adapter->flag & BOARD_IOMAP ) {
-
-		outb(adapter->mbox_dma & 0xFF,
-				adapter->host->io_port + MBOX_PORT0);
-
-		outb((adapter->mbox_dma >> 8) & 0xFF,
-				adapter->host->io_port + MBOX_PORT1);
-
-		outb((adapter->mbox_dma >> 16) & 0xFF,
-				adapter->host->io_port + MBOX_PORT2);
-
-		outb((adapter->mbox_dma >> 24) & 0xFF,
-				adapter->host->io_port + MBOX_PORT3);
-
-		outb(ENABLE_MBOX_BYTE,
-				adapter->host->io_port + ENABLE_MBOX_REGION);
-
-		irq_ack(adapter);
-
-		irq_enable(adapter);
-	}
-
-	return 0;
-}
-
-
-/*
- * mega_query_adapter()
- * @adapter - pointer to our soft state
- *
- * Issue the adapter inquiry commands to the controller and find out
- * information and parameter about the devices attached
- */
-static int
-mega_query_adapter(adapter_t *adapter)
-{
-	dma_addr_t	prod_info_dma_handle;
-	mega_inquiry3	*inquiry3;
-	u8	raw_mbox[sizeof(struct mbox_out)];
-	mbox_t	*mbox;
-	int	retval;
-
-	/* Initialize adapter inquiry mailbox */
-
-	mbox = (mbox_t *)raw_mbox;
-
-	memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE);
-	memset(&mbox->m_out, 0, sizeof(raw_mbox));
-
-	/*
-	 * Try to issue Inquiry3 command
-	 * if not succeeded, then issue MEGA_MBOXCMD_ADAPTERINQ command and
-	 * update enquiry3 structure
-	 */
-	mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle;
-
-	inquiry3 = (mega_inquiry3 *)adapter->mega_buffer;
-
-	raw_mbox[0] = FC_NEW_CONFIG;		/* i.e. mbox->cmd=0xA1 */
-	raw_mbox[2] = NC_SUBOP_ENQUIRY3;	/* i.e. 0x0F */
-	raw_mbox[3] = ENQ3_GET_SOLICITED_FULL;	/* i.e. 0x02 */
-
-	/* Issue a blocking command to the card */
-	if ((retval = issue_scb_block(adapter, raw_mbox))) {
-		/* the adapter does not support 40ld */
-
-		mraid_ext_inquiry	*ext_inq;
-		mraid_inquiry		*inq;
-		dma_addr_t		dma_handle;
-
-		ext_inq = pci_alloc_consistent(adapter->dev,
-				sizeof(mraid_ext_inquiry), &dma_handle);
-
-		if( ext_inq == NULL ) return -1;
-
-		inq = &ext_inq->raid_inq;
-
-		mbox->m_out.xferaddr = (u32)dma_handle;
-
-		/*issue old 0x04 command to adapter */
-		mbox->m_out.cmd = MEGA_MBOXCMD_ADPEXTINQ;
-
-		issue_scb_block(adapter, raw_mbox);
-
-		/*
-		 * update Enquiry3 and ProductInfo structures with
-		 * mraid_inquiry structure
-		 */
-		mega_8_to_40ld(inq, inquiry3,
-				(mega_product_info *)&adapter->product_info);
-
-		pci_free_consistent(adapter->dev, sizeof(mraid_ext_inquiry),
-				ext_inq, dma_handle);
-
-	} else {		/*adapter supports 40ld */
-		adapter->flag |= BOARD_40LD;
-
-		/*
-		 * get product_info, which is static information and will be
-		 * unchanged
-		 */
-		prod_info_dma_handle = pci_map_single(adapter->dev, (void *)
-				&adapter->product_info,
-				sizeof(mega_product_info), PCI_DMA_FROMDEVICE);
-
-		mbox->m_out.xferaddr = prod_info_dma_handle;
-
-		raw_mbox[0] = FC_NEW_CONFIG;	/* i.e. mbox->cmd=0xA1 */
-		raw_mbox[2] = NC_SUBOP_PRODUCT_INFO;	/* i.e. 0x0E */
-
-		if ((retval = issue_scb_block(adapter, raw_mbox)))
-			dev_warn(&adapter->dev->dev,
-				"Product_info cmd failed with error: %d\n",
-				retval);
-
-		pci_unmap_single(adapter->dev, prod_info_dma_handle,
-				sizeof(mega_product_info), PCI_DMA_FROMDEVICE);
-	}
-
-
-	/*
-	 * kernel scans the channels from 0 to <= max_channel
-	 */
-	adapter->host->max_channel =
-		adapter->product_info.nchannels + NVIRT_CHAN -1;
-
-	adapter->host->max_id = 16;	/* max targets per channel */
-
-	adapter->host->max_lun = 7;	/* Up to 7 luns for non disk devices */
-
-	adapter->host->cmd_per_lun = max_cmd_per_lun;
-
-	adapter->numldrv = inquiry3->num_ldrv;
-
-	adapter->max_cmds = adapter->product_info.max_commands;
-
-	if(adapter->max_cmds > MAX_COMMANDS)
-		adapter->max_cmds = MAX_COMMANDS;
-
-	adapter->host->can_queue = adapter->max_cmds - 1;
-
-	/*
-	 * Get the maximum number of scatter-gather elements supported by this
-	 * firmware
-	 */
-	mega_get_max_sgl(adapter);
-
-	adapter->host->sg_tablesize = adapter->sglen;
-
-	/* use HP firmware and bios version encoding
-	   Note: fw_version[0|1] and bios_version[0|1] were originally shifted
-	   right 8 bits making them zero. This 0 value was hardcoded to fix
-	   sparse warnings. */
-	if (adapter->product_info.subsysvid == PCI_VENDOR_ID_HP) {
-		sprintf (adapter->fw_version, "%c%d%d.%d%d",
-			 adapter->product_info.fw_version[2],
-			 0,
-			 adapter->product_info.fw_version[1] & 0x0f,
-			 0,
-			 adapter->product_info.fw_version[0] & 0x0f);
-		sprintf (adapter->bios_version, "%c%d%d.%d%d",
-			 adapter->product_info.bios_version[2],
-			 0,
-			 adapter->product_info.bios_version[1] & 0x0f,
-			 0,
-			 adapter->product_info.bios_version[0] & 0x0f);
-	} else {
-		memcpy(adapter->fw_version,
-				(char *)adapter->product_info.fw_version, 4);
-		adapter->fw_version[4] = 0;
-
-		memcpy(adapter->bios_version,
-				(char *)adapter->product_info.bios_version, 4);
-
-		adapter->bios_version[4] = 0;
-	}
-
-	dev_notice(&adapter->dev->dev, "[%s:%s] detected %d logical drives\n",
-		adapter->fw_version, adapter->bios_version, adapter->numldrv);
-
-	/*
-	 * Do we support extended (>10 bytes) cdbs
-	 */
-	adapter->support_ext_cdb = mega_support_ext_cdb(adapter);
-	if (adapter->support_ext_cdb)
-		dev_notice(&adapter->dev->dev, "supports extended CDBs\n");
-
-
-	return 0;
-}
-
-/**
- * mega_runpendq()
- * @adapter - pointer to our soft state
- *
- * Runs through the list of pending requests.
- */
-static inline void
-mega_runpendq(adapter_t *adapter)
-{
-	if(!list_empty(&adapter->pending_list))
-		__mega_runpendq(adapter);
-}
-
-/*
- * megaraid_queue()
- * @scmd - Issue this scsi command
- * @done - the callback hook into the scsi mid-layer
- *
- * The command queuing entry point for the mid-layer.
- */
-static int
-megaraid_queue_lck(Scsi_Cmnd *scmd, void (*done)(Scsi_Cmnd *))
-{
-	adapter_t	*adapter;
-	scb_t	*scb;
-	int	busy=0;
-	unsigned long flags;
-
-	adapter = (adapter_t *)scmd->device->host->hostdata;
-
-	scmd->scsi_done = done;
-
-
-	/*
-	 * Allocate and build a SCB request
-	 * busy flag will be set if mega_build_cmd() command could not
-	 * allocate scb. We will return non-zero status in that case.
-	 * NOTE: scb can be null even though certain commands completed
-	 * successfully, e.g., MODE_SENSE and TEST_UNIT_READY, we would
-	 * return 0 in that case.
-	 */
-
-	spin_lock_irqsave(&adapter->lock, flags);
-	scb = mega_build_cmd(adapter, scmd, &busy);
-	if (!scb)
-		goto out;
-
-	scb->state |= SCB_PENDQ;
-	list_add_tail(&scb->list, &adapter->pending_list);
-
-	/*
-	 * Check if the HBA is in quiescent state, e.g., during a
-	 * delete logical drive opertion. If it is, don't run
-	 * the pending_list.
-	 */
-	if (atomic_read(&adapter->quiescent) == 0)
-		mega_runpendq(adapter);
-
-	busy = 0;
- out:
-	spin_unlock_irqrestore(&adapter->lock, flags);
-	return busy;
-}
-
-static DEF_SCSI_QCMD(megaraid_queue)
-
-/**
- * mega_allocate_scb()
- * @adapter - pointer to our soft state
- * @cmd - scsi command from the mid-layer
- *
- * Allocate a SCB structure. This is the central structure for controller
- * commands.
- */
-static inline scb_t *
-mega_allocate_scb(adapter_t *adapter, Scsi_Cmnd *cmd)
-{
-	struct list_head *head = &adapter->free_list;
-	scb_t	*scb;
-
-	/* Unlink command from Free List */
-	if( !list_empty(head) ) {
-
-		scb = list_entry(head->next, scb_t, list);
-
-		list_del_init(head->next);
-
-		scb->state = SCB_ACTIVE;
-		scb->cmd = cmd;
-		scb->dma_type = MEGA_DMA_TYPE_NONE;
-
-		return scb;
-	}
-
-	return NULL;
-}
-
-/**
- * mega_get_ldrv_num()
- * @adapter - pointer to our soft state
- * @cmd - scsi mid layer command
- * @channel - channel on the controller
- *
- * Calculate the logical drive number based on the information in scsi command
- * and the channel number.
- */
-static inline int
-mega_get_ldrv_num(adapter_t *adapter, Scsi_Cmnd *cmd, int channel)
-{
-	int		tgt;
-	int		ldrv_num;
-
-	tgt = cmd->device->id;
-	
-	if ( tgt > adapter->this_id )
-		tgt--;	/* we do not get inquires for initiator id */
-
-	ldrv_num = (channel * 15) + tgt;
-
-
-	/*
-	 * If we have a logical drive with boot enabled, project it first
-	 */
-	if( adapter->boot_ldrv_enabled ) {
-		if( ldrv_num == 0 ) {
-			ldrv_num = adapter->boot_ldrv;
-		}
-		else {
-			if( ldrv_num <= adapter->boot_ldrv ) {
-				ldrv_num--;
-			}
-		}
-	}
-
-	/*
-	 * If "delete logical drive" feature is enabled on this controller.
-	 * Do only if at least one delete logical drive operation was done.
-	 *
-	 * Also, after logical drive deletion, instead of logical drive number,
-	 * the value returned should be 0x80+logical drive id.
-	 *
-	 * These is valid only for IO commands.
-	 */
-
-	if (adapter->support_random_del && adapter->read_ldidmap )
-		switch (cmd->cmnd[0]) {
-		case READ_6:	/* fall through */
-		case WRITE_6:	/* fall through */
-		case READ_10:	/* fall through */
-		case WRITE_10:
-			ldrv_num += 0x80;
-		}
-
-	return ldrv_num;
-}
-
-/**
- * mega_build_cmd()
- * @adapter - pointer to our soft state
- * @cmd - Prepare using this scsi command
- * @busy - busy flag if no resources
- *
- * Prepares a command and scatter gather list for the controller. This routine
- * also finds out if the commands is intended for a logical drive or a
- * physical device and prepares the controller command accordingly.
- *
- * We also re-order the logical drives and physical devices based on their
- * boot settings.
- */
-static scb_t *
-mega_build_cmd(adapter_t *adapter, Scsi_Cmnd *cmd, int *busy)
-{
-	mega_ext_passthru	*epthru;
-	mega_passthru	*pthru;
-	scb_t	*scb;
-	mbox_t	*mbox;
-	u32	seg;
-	char	islogical;
-	int	max_ldrv_num;
-	int	channel = 0;
-	int	target = 0;
-	int	ldrv_num = 0;   /* logical drive number */
-
-	/*
-	 * We know what channels our logical drives are on - mega_find_card()
-	 */
-	islogical = adapter->logdrv_chan[cmd->device->channel];
-
-	/*
-	 * The theory: If physical drive is chosen for boot, all the physical
-	 * devices are exported before the logical drives, otherwise physical
-	 * devices are pushed after logical drives, in which case - Kernel sees
-	 * the physical devices on virtual channel which is obviously converted
-	 * to actual channel on the HBA.
-	 */
-	if( adapter->boot_pdrv_enabled ) {
-		if( islogical ) {
-			/* logical channel */
-			channel = cmd->device->channel -
-				adapter->product_info.nchannels;
-		}
-		else {
-			/* this is physical channel */
-			channel = cmd->device->channel; 
-			target = cmd->device->id;
-
-			/*
-			 * boot from a physical disk, that disk needs to be
-			 * exposed first IF both the channels are SCSI, then
-			 * booting from the second channel is not allowed.
-			 */
-			if( target == 0 ) {
-				target = adapter->boot_pdrv_tgt;
-			}
-			else if( target == adapter->boot_pdrv_tgt ) {
-				target = 0;
-			}
-		}
-	}
-	else {
-		if( islogical ) {
-			/* this is the logical channel */
-			channel = cmd->device->channel;	
-		}
-		else {
-			/* physical channel */
-			channel = cmd->device->channel - NVIRT_CHAN;	
-			target = cmd->device->id;
-		}
-	}
-
-
-	if(islogical) {
-
-		/* have just LUN 0 for each target on virtual channels */
-		if (cmd->device->lun) {
-			cmd->result = (DID_BAD_TARGET << 16);
-			cmd->scsi_done(cmd);
-			return NULL;
-		}
-
-		ldrv_num = mega_get_ldrv_num(adapter, cmd, channel);
-
-
-		max_ldrv_num = (adapter->flag & BOARD_40LD) ?
-			MAX_LOGICAL_DRIVES_40LD : MAX_LOGICAL_DRIVES_8LD;
-
-		/*
-		 * max_ldrv_num increases by 0x80 if some logical drive was
-		 * deleted.
-		 */
-		if(adapter->read_ldidmap)
-			max_ldrv_num += 0x80;
-
-		if(ldrv_num > max_ldrv_num ) {
-			cmd->result = (DID_BAD_TARGET << 16);
-			cmd->scsi_done(cmd);
-			return NULL;
-		}
-
-	}
-	else {
-		if( cmd->device->lun > 7) {
-			/*
-			 * Do not support lun >7 for physically accessed
-			 * devices
-			 */
-			cmd->result = (DID_BAD_TARGET << 16);
-			cmd->scsi_done(cmd);
-			return NULL;
-		}
-	}
-
-	/*
-	 *
-	 * Logical drive commands
-	 *
-	 */
-	if(islogical) {
-		switch (cmd->cmnd[0]) {
-		case TEST_UNIT_READY:
-#if MEGA_HAVE_CLUSTERING
-			/*
-			 * Do we support clustering and is the support enabled
-			 * If no, return success always
-			 */
-			if( !adapter->has_cluster ) {
-				cmd->result = (DID_OK << 16);
-				cmd->scsi_done(cmd);
-				return NULL;
-			}
-
-			if(!(scb = mega_allocate_scb(adapter, cmd))) {
-				*busy = 1;
-				return NULL;
-			}
-
-			scb->raw_mbox[0] = MEGA_CLUSTER_CMD;
-			scb->raw_mbox[2] = MEGA_RESERVATION_STATUS;
-			scb->raw_mbox[3] = ldrv_num;
-
-			scb->dma_direction = PCI_DMA_NONE;
-
-			return scb;
-#else
-			cmd->result = (DID_OK << 16);
-			cmd->scsi_done(cmd);
-			return NULL;
-#endif
-
-		case MODE_SENSE: {
-			char *buf;
-			struct scatterlist *sg;
-
-			sg = scsi_sglist(cmd);
-			buf = kmap_atomic(sg_page(sg)) + sg->offset;
-
-			memset(buf, 0, cmd->cmnd[4]);
-			kunmap_atomic(buf - sg->offset);
-
-			cmd->result = (DID_OK << 16);
-			cmd->scsi_done(cmd);
-			return NULL;
-		}
-
-		case READ_CAPACITY:
-		case INQUIRY:
-
-			if(!(adapter->flag & (1L << cmd->device->channel))) {
-
-				dev_notice(&adapter->dev->dev,
-					"scsi%d: scanning scsi channel %d "
-					"for logical drives\n",
-						adapter->host->host_no,
-						cmd->device->channel);
-
-				adapter->flag |= (1L << cmd->device->channel);
-			}
-
-			/* Allocate a SCB and initialize passthru */
-			if(!(scb = mega_allocate_scb(adapter, cmd))) {
-				*busy = 1;
-				return NULL;
-			}
-			pthru = scb->pthru;
-
-			mbox = (mbox_t *)scb->raw_mbox;
-			memset(mbox, 0, sizeof(scb->raw_mbox));
-			memset(pthru, 0, sizeof(mega_passthru));
-
-			pthru->timeout = 0;
-			pthru->ars = 1;
-			pthru->reqsenselen = 14;
-			pthru->islogical = 1;
-			pthru->logdrv = ldrv_num;
-			pthru->cdblen = cmd->cmd_len;
-			memcpy(pthru->cdb, cmd->cmnd, cmd->cmd_len);
-
-			if( adapter->has_64bit_addr ) {
-				mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU64;
-			}
-			else {
-				mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU;
-			}
-
-			scb->dma_direction = PCI_DMA_FROMDEVICE;
-
-			pthru->numsgelements = mega_build_sglist(adapter, scb,
-				&pthru->dataxferaddr, &pthru->dataxferlen);
-
-			mbox->m_out.xferaddr = scb->pthru_dma_addr;
-
-			return scb;
-
-		case READ_6:
-		case WRITE_6:
-		case READ_10:
-		case WRITE_10:
-		case READ_12:
-		case WRITE_12:
-
-			/* Allocate a SCB and initialize mailbox */
-			if(!(scb = mega_allocate_scb(adapter, cmd))) {
-				*busy = 1;
-				return NULL;
-			}
-			mbox = (mbox_t *)scb->raw_mbox;
-
-			memset(mbox, 0, sizeof(scb->raw_mbox));
-			mbox->m_out.logdrv = ldrv_num;
-
-			/*
-			 * A little hack: 2nd bit is zero for all scsi read
-			 * commands and is set for all scsi write commands
-			 */
-			if( adapter->has_64bit_addr ) {
-				mbox->m_out.cmd = (*cmd->cmnd & 0x02) ?
-					MEGA_MBOXCMD_LWRITE64:
-					MEGA_MBOXCMD_LREAD64 ;
-			}
-			else {
-				mbox->m_out.cmd = (*cmd->cmnd & 0x02) ?
-					MEGA_MBOXCMD_LWRITE:
-					MEGA_MBOXCMD_LREAD ;
-			}
-
-			/*
-			 * 6-byte READ(0x08) or WRITE(0x0A) cdb
-			 */
-			if( cmd->cmd_len == 6 ) {
-				mbox->m_out.numsectors = (u32) cmd->cmnd[4];
-				mbox->m_out.lba =
-					((u32)cmd->cmnd[1] << 16) |
-					((u32)cmd->cmnd[2] << 8) |
-					(u32)cmd->cmnd[3];
-
-				mbox->m_out.lba &= 0x1FFFFF;
-
-#if MEGA_HAVE_STATS
-				/*
-				 * Take modulo 0x80, since the logical drive
-				 * number increases by 0x80 when a logical
-				 * drive was deleted
-				 */
-				if (*cmd->cmnd == READ_6) {
-					adapter->nreads[ldrv_num%0x80]++;
-					adapter->nreadblocks[ldrv_num%0x80] +=
-						mbox->m_out.numsectors;
-				} else {
-					adapter->nwrites[ldrv_num%0x80]++;
-					adapter->nwriteblocks[ldrv_num%0x80] +=
-						mbox->m_out.numsectors;
-				}
-#endif
-			}
-
-			/*
-			 * 10-byte READ(0x28) or WRITE(0x2A) cdb
-			 */
-			if( cmd->cmd_len == 10 ) {
-				mbox->m_out.numsectors =
-					(u32)cmd->cmnd[8] |
-					((u32)cmd->cmnd[7] << 8);
-				mbox->m_out.lba =
-					((u32)cmd->cmnd[2] << 24) |
-					((u32)cmd->cmnd[3] << 16) |
-					((u32)cmd->cmnd[4] << 8) |
-					(u32)cmd->cmnd[5];
-
-#if MEGA_HAVE_STATS
-				if (*cmd->cmnd == READ_10) {
-					adapter->nreads[ldrv_num%0x80]++;
-					adapter->nreadblocks[ldrv_num%0x80] +=
-						mbox->m_out.numsectors;
-				} else {
-					adapter->nwrites[ldrv_num%0x80]++;
-					adapter->nwriteblocks[ldrv_num%0x80] +=
-						mbox->m_out.numsectors;
-				}
-#endif
-			}
-
-			/*
-			 * 12-byte READ(0xA8) or WRITE(0xAA) cdb
-			 */
-			if( cmd->cmd_len == 12 ) {
-				mbox->m_out.lba =
-					((u32)cmd->cmnd[2] << 24) |
-					((u32)cmd->cmnd[3] << 16) |
-					((u32)cmd->cmnd[4] << 8) |
-					(u32)cmd->cmnd[5];
-
-				mbox->m_out.numsectors =
-					((u32)cmd->cmnd[6] << 24) |
-					((u32)cmd->cmnd[7] << 16) |
-					((u32)cmd->cmnd[8] << 8) |
-					(u32)cmd->cmnd[9];
-
-#if MEGA_HAVE_STATS
-				if (*cmd->cmnd == READ_12) {
-					adapter->nreads[ldrv_num%0x80]++;
-					adapter->nreadblocks[ldrv_num%0x80] +=
-						mbox->m_out.numsectors;
-				} else {
-					adapter->nwrites[ldrv_num%0x80]++;
-					adapter->nwriteblocks[ldrv_num%0x80] +=
-						mbox->m_out.numsectors;
-				}
-#endif
-			}
-
-			/*
-			 * If it is a read command
-			 */
-			if( (*cmd->cmnd & 0x0F) == 0x08 ) {
-				scb->dma_direction = PCI_DMA_FROMDEVICE;
-			}
-			else {
-				scb->dma_direction = PCI_DMA_TODEVICE;
-			}
-
-			/* Calculate Scatter-Gather info */
-			mbox->m_out.numsgelements = mega_build_sglist(adapter, scb,
-					(u32 *)&mbox->m_out.xferaddr, &seg);
-
-			return scb;
-
-#if MEGA_HAVE_CLUSTERING
-		case RESERVE:	/* Fall through */
-		case RELEASE:
-
-			/*
-			 * Do we support clustering and is the support enabled
-			 */
-			if( ! adapter->has_cluster ) {
-
-				cmd->result = (DID_BAD_TARGET << 16);
-				cmd->scsi_done(cmd);
-				return NULL;
-			}
-
-			/* Allocate a SCB and initialize mailbox */
-			if(!(scb = mega_allocate_scb(adapter, cmd))) {
-				*busy = 1;
-				return NULL;
-			}
-
-			scb->raw_mbox[0] = MEGA_CLUSTER_CMD;
-			scb->raw_mbox[2] = ( *cmd->cmnd == RESERVE ) ?
-				MEGA_RESERVE_LD : MEGA_RELEASE_LD;
-
-			scb->raw_mbox[3] = ldrv_num;
-
-			scb->dma_direction = PCI_DMA_NONE;
-
-			return scb;
-#endif
-
-		default:
-			cmd->result = (DID_BAD_TARGET << 16);
-			cmd->scsi_done(cmd);
-			return NULL;
-		}
-	}
-
-	/*
-	 * Passthru drive commands
-	 */
-	else {
-		/* Allocate a SCB and initialize passthru */
-		if(!(scb = mega_allocate_scb(adapter, cmd))) {
-			*busy = 1;
-			return NULL;
-		}
-
-		mbox = (mbox_t *)scb->raw_mbox;
-		memset(mbox, 0, sizeof(scb->raw_mbox));
-
-		if( adapter->support_ext_cdb ) {
-
-			epthru = mega_prepare_extpassthru(adapter, scb, cmd,
-					channel, target);
-
-			mbox->m_out.cmd = MEGA_MBOXCMD_EXTPTHRU;
-
-			mbox->m_out.xferaddr = scb->epthru_dma_addr;
-
-		}
-		else {
-
-			pthru = mega_prepare_passthru(adapter, scb, cmd,
-					channel, target);
-
-			/* Initialize mailbox */
-			if( adapter->has_64bit_addr ) {
-				mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU64;
-			}
-			else {
-				mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU;
-			}
-
-			mbox->m_out.xferaddr = scb->pthru_dma_addr;
-
-		}
-		return scb;
-	}
-	return NULL;
-}
-
-
-/**
- * mega_prepare_passthru()
- * @adapter - pointer to our soft state
- * @scb - our scsi control block
- * @cmd - scsi command from the mid-layer
- * @channel - actual channel on the controller
- * @target - actual id on the controller.
- *
- * prepare a command for the scsi physical devices.
- */
-static mega_passthru *
-mega_prepare_passthru(adapter_t *adapter, scb_t *scb, Scsi_Cmnd *cmd,
-		int channel, int target)
-{
-	mega_passthru *pthru;
-
-	pthru = scb->pthru;
-	memset(pthru, 0, sizeof (mega_passthru));
-
-	/* 0=6sec/1=60sec/2=10min/3=3hrs */
-	pthru->timeout = 2;
-
-	pthru->ars = 1;
-	pthru->reqsenselen = 14;
-	pthru->islogical = 0;
-
-	pthru->channel = (adapter->flag & BOARD_40LD) ? 0 : channel;
-
-	pthru->target = (adapter->flag & BOARD_40LD) ?
-		(channel << 4) | target : target;
-
-	pthru->cdblen = cmd->cmd_len;
-	pthru->logdrv = cmd->device->lun;
-
-	memcpy(pthru->cdb, cmd->cmnd, cmd->cmd_len);
-
-	/* Not sure about the direction */
-	scb->dma_direction = PCI_DMA_BIDIRECTIONAL;
-
-	/* Special Code for Handling READ_CAPA/ INQ using bounce buffers */
-	switch (cmd->cmnd[0]) {
-	case INQUIRY:
-	case READ_CAPACITY:
-		if(!(adapter->flag & (1L << cmd->device->channel))) {
-
-			dev_notice(&adapter->dev->dev,
-				"scsi%d: scanning scsi channel %d [P%d] "
-				"for physical devices\n",
-					adapter->host->host_no,
-					cmd->device->channel, channel);
-
-			adapter->flag |= (1L << cmd->device->channel);
-		}
-		/* Fall through */
-	default:
-		pthru->numsgelements = mega_build_sglist(adapter, scb,
-				&pthru->dataxferaddr, &pthru->dataxferlen);
-		break;
-	}
-	return pthru;
-}
-
-
-/**
- * mega_prepare_extpassthru()
- * @adapter - pointer to our soft state
- * @scb - our scsi control block
- * @cmd - scsi command from the mid-layer
- * @channel - actual channel on the controller
- * @target - actual id on the controller.
- *
- * prepare a command for the scsi physical devices. This rountine prepares
- * commands for devices which can take extended CDBs (>10 bytes)
- */
-static mega_ext_passthru *
-mega_prepare_extpassthru(adapter_t *adapter, scb_t *scb, Scsi_Cmnd *cmd,
-		int channel, int target)
-{
-	mega_ext_passthru	*epthru;
-
-	epthru = scb->epthru;
-	memset(epthru, 0, sizeof(mega_ext_passthru));
-
-	/* 0=6sec/1=60sec/2=10min/3=3hrs */
-	epthru->timeout = 2;
-
-	epthru->ars = 1;
-	epthru->reqsenselen = 14;
-	epthru->islogical = 0;
-
-	epthru->channel = (adapter->flag & BOARD_40LD) ? 0 : channel;
-	epthru->target = (adapter->flag & BOARD_40LD) ?
-		(channel << 4) | target : target;
-
-	epthru->cdblen = cmd->cmd_len;
-	epthru->logdrv = cmd->device->lun;
-
-	memcpy(epthru->cdb, cmd->cmnd, cmd->cmd_len);
-
-	/* Not sure about the direction */
-	scb->dma_direction = PCI_DMA_BIDIRECTIONAL;
-
-	switch(cmd->cmnd[0]) {
-	case INQUIRY:
-	case READ_CAPACITY:
-		if(!(adapter->flag & (1L << cmd->device->channel))) {
-
-			dev_notice(&adapter->dev->dev,
-				"scsi%d: scanning scsi channel %d [P%d] "
-				"for physical devices\n",
-					adapter->host->host_no,
-					cmd->device->channel, channel);
-
-			adapter->flag |= (1L << cmd->device->channel);
-		}
-		/* Fall through */
-	default:
-		epthru->numsgelements = mega_build_sglist(adapter, scb,
-				&epthru->dataxferaddr, &epthru->dataxferlen);
-		break;
-	}
-
-	return epthru;
-}
-
-static void
-__mega_runpendq(adapter_t *adapter)
-{
-	scb_t *scb;
-	struct list_head *pos, *next;
-
-	/* Issue any pending commands to the card */
-	list_for_each_safe(pos, next, &adapter->pending_list) {
-
-		scb = list_entry(pos, scb_t, list);
-
-		if( !(scb->state & SCB_ISSUED) ) {
-
-			if( issue_scb(adapter, scb) != 0 )
-				return;
-		}
-	}
-
-	return;
-}
-
-
-/**
- * issue_scb()
- * @adapter - pointer to our soft state
- * @scb - scsi control block
- *
- * Post a command to the card if the mailbox is available, otherwise return
- * busy. We also take the scb from the pending list if the mailbox is
- * available.
- */
-static int
-issue_scb(adapter_t *adapter, scb_t *scb)
-{
-	volatile mbox64_t	*mbox64 = adapter->mbox64;
-	volatile mbox_t		*mbox = adapter->mbox;
-	unsigned int	i = 0;
-
-	if(unlikely(mbox->m_in.busy)) {
-		do {
-			udelay(1);
-			i++;
-		} while( mbox->m_in.busy && (i < max_mbox_busy_wait) );
-
-		if(mbox->m_in.busy) return -1;
-	}
-
-	/* Copy mailbox data into host structure */
-	memcpy((char *)&mbox->m_out, (char *)scb->raw_mbox, 
-			sizeof(struct mbox_out));
-
-	mbox->m_out.cmdid = scb->idx;	/* Set cmdid */
-	mbox->m_in.busy = 1;		/* Set busy */
-
-
-	/*
-	 * Increment the pending queue counter
-	 */
-	atomic_inc(&adapter->pend_cmds);
-
-	switch (mbox->m_out.cmd) {
-	case MEGA_MBOXCMD_LREAD64:
-	case MEGA_MBOXCMD_LWRITE64:
-	case MEGA_MBOXCMD_PASSTHRU64:
-	case MEGA_MBOXCMD_EXTPTHRU:
-		mbox64->xfer_segment_lo = mbox->m_out.xferaddr;
-		mbox64->xfer_segment_hi = 0;
-		mbox->m_out.xferaddr = 0xFFFFFFFF;
-		break;
-	default:
-		mbox64->xfer_segment_lo = 0;
-		mbox64->xfer_segment_hi = 0;
-	}
-
-	/*
-	 * post the command
-	 */
-	scb->state |= SCB_ISSUED;
-
-	if( likely(adapter->flag & BOARD_MEMMAP) ) {
-		mbox->m_in.poll = 0;
-		mbox->m_in.ack = 0;
-		WRINDOOR(adapter, adapter->mbox_dma | 0x1);
-	}
-	else {
-		irq_enable(adapter);
-		issue_command(adapter);
-	}
-
-	return 0;
-}
-
-/*
- * Wait until the controller's mailbox is available
- */
-static inline int
-mega_busywait_mbox (adapter_t *adapter)
-{
-	if (adapter->mbox->m_in.busy)
-		return __mega_busywait_mbox(adapter);
-	return 0;
-}
-
-/**
- * issue_scb_block()
- * @adapter - pointer to our soft state
- * @raw_mbox - the mailbox
- *
- * Issue a scb in synchronous and non-interrupt mode
- */
-static int
-issue_scb_block(adapter_t *adapter, u_char *raw_mbox)
-{
-	volatile mbox64_t *mbox64 = adapter->mbox64;
-	volatile mbox_t *mbox = adapter->mbox;
-	u8	byte;
-
-	/* Wait until mailbox is free */
-	if(mega_busywait_mbox (adapter))
-		goto bug_blocked_mailbox;
-
-	/* Copy mailbox data into host structure */
-	memcpy((char *) mbox, raw_mbox, sizeof(struct mbox_out));
-	mbox->m_out.cmdid = 0xFE;
-	mbox->m_in.busy = 1;
-
-	switch (raw_mbox[0]) {
-	case MEGA_MBOXCMD_LREAD64:
-	case MEGA_MBOXCMD_LWRITE64:
-	case MEGA_MBOXCMD_PASSTHRU64:
-	case MEGA_MBOXCMD_EXTPTHRU:
-		mbox64->xfer_segment_lo = mbox->m_out.xferaddr;
-		mbox64->xfer_segment_hi = 0;
-		mbox->m_out.xferaddr = 0xFFFFFFFF;
-		break;
-	default:
-		mbox64->xfer_segment_lo = 0;
-		mbox64->xfer_segment_hi = 0;
-	}
-
-	if( likely(adapter->flag & BOARD_MEMMAP) ) {
-		mbox->m_in.poll = 0;
-		mbox->m_in.ack = 0;
-		mbox->m_in.numstatus = 0xFF;
-		mbox->m_in.status = 0xFF;
-		WRINDOOR(adapter, adapter->mbox_dma | 0x1);
-
-		while((volatile u8)mbox->m_in.numstatus == 0xFF)
-			cpu_relax();
-
-		mbox->m_in.numstatus = 0xFF;
-
-		while( (volatile u8)mbox->m_in.poll != 0x77 )
-			cpu_relax();
-
-		mbox->m_in.poll = 0;
-		mbox->m_in.ack = 0x77;
-
-		WRINDOOR(adapter, adapter->mbox_dma | 0x2);
-
-		while(RDINDOOR(adapter) & 0x2)
-			cpu_relax();
-	}
-	else {
-		irq_disable(adapter);
-		issue_command(adapter);
-
-		while (!((byte = irq_state(adapter)) & INTR_VALID))
-			cpu_relax();
-
-		set_irq_state(adapter, byte);
-		irq_enable(adapter);
-		irq_ack(adapter);
-	}
-
-	return mbox->m_in.status;
-
-bug_blocked_mailbox:
-	dev_warn(&adapter->dev->dev, "Blocked mailbox......!!\n");
-	udelay (1000);
-	return -1;
-}
-
-
-/**
- * megaraid_isr_iomapped()
- * @irq - irq
- * @devp - pointer to our soft state
- *
- * Interrupt service routine for io-mapped controllers.
- * Find out if our device is interrupting. If yes, acknowledge the interrupt
- * and service the completed commands.
- */
-static irqreturn_t
-megaraid_isr_iomapped(int irq, void *devp)
-{
-	adapter_t	*adapter = devp;
-	unsigned long	flags;
-	u8	status;
-	u8	nstatus;
-	u8	completed[MAX_FIRMWARE_STATUS];
-	u8	byte;
-	int	handled = 0;
-
-
-	/*
-	 * loop till F/W has more commands for us to complete.
-	 */
-	spin_lock_irqsave(&adapter->lock, flags);
-
-	do {
-		/* Check if a valid interrupt is pending */
-		byte = irq_state(adapter);
-		if( (byte & VALID_INTR_BYTE) == 0 ) {
-			/*
-			 * No more pending commands
-			 */
-			goto out_unlock;
-		}
-		set_irq_state(adapter, byte);
-
-		while((nstatus = (volatile u8)adapter->mbox->m_in.numstatus)
-				== 0xFF)
-			cpu_relax();
-		adapter->mbox->m_in.numstatus = 0xFF;
-
-		status = adapter->mbox->m_in.status;
-
-		/*
-		 * decrement the pending queue counter
-		 */
-		atomic_sub(nstatus, &adapter->pend_cmds);
-
-		memcpy(completed, (void *)adapter->mbox->m_in.completed, 
-				nstatus);
-
-		/* Acknowledge interrupt */
-		irq_ack(adapter);
-
-		mega_cmd_done(adapter, completed, nstatus, status);
-
-		mega_rundoneq(adapter);
-
-		handled = 1;
-
-		/* Loop through any pending requests */
-		if(atomic_read(&adapter->quiescent) == 0) {
-			mega_runpendq(adapter);
-		}
-
-	} while(1);
-
- out_unlock:
-
-	spin_unlock_irqrestore(&adapter->lock, flags);
-
-	return IRQ_RETVAL(handled);
-}
-
-
-/**
- * megaraid_isr_memmapped()
- * @irq - irq
- * @devp - pointer to our soft state
- *
- * Interrupt service routine for memory-mapped controllers.
- * Find out if our device is interrupting. If yes, acknowledge the interrupt
- * and service the completed commands.
- */
-static irqreturn_t
-megaraid_isr_memmapped(int irq, void *devp)
-{
-	adapter_t	*adapter = devp;
-	unsigned long	flags;
-	u8	status;
-	u32	dword = 0;
-	u8	nstatus;
-	u8	completed[MAX_FIRMWARE_STATUS];
-	int	handled = 0;
-
-
-	/*
-	 * loop till F/W has more commands for us to complete.
-	 */
-	spin_lock_irqsave(&adapter->lock, flags);
-
-	do {
-		/* Check if a valid interrupt is pending */
-		dword = RDOUTDOOR(adapter);
-		if(dword != 0x10001234) {
-			/*
-			 * No more pending commands
-			 */
-			goto out_unlock;
-		}
-		WROUTDOOR(adapter, 0x10001234);
-
-		while((nstatus = (volatile u8)adapter->mbox->m_in.numstatus)
-				== 0xFF) {
-			cpu_relax();
-		}
-		adapter->mbox->m_in.numstatus = 0xFF;
-
-		status = adapter->mbox->m_in.status;
-
-		/*
-		 * decrement the pending queue counter
-		 */
-		atomic_sub(nstatus, &adapter->pend_cmds);
-
-		memcpy(completed, (void *)adapter->mbox->m_in.completed, 
-				nstatus);
-
-		/* Acknowledge interrupt */
-		WRINDOOR(adapter, 0x2);
-
-		handled = 1;
-
-		while( RDINDOOR(adapter) & 0x02 )
-			cpu_relax();
-
-		mega_cmd_done(adapter, completed, nstatus, status);
-
-		mega_rundoneq(adapter);
-
-		/* Loop through any pending requests */
-		if(atomic_read(&adapter->quiescent) == 0) {
-			mega_runpendq(adapter);
-		}
-
-	} while(1);
-
- out_unlock:
-
-	spin_unlock_irqrestore(&adapter->lock, flags);
-
-	return IRQ_RETVAL(handled);
-}
-/**
- * mega_cmd_done()
- * @adapter - pointer to our soft state
- * @completed - array of ids of completed commands
- * @nstatus - number of completed commands
- * @status - status of the last command completed
- *
- * Complete the commands and call the scsi mid-layer callback hooks.
- */
-static void
-mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)
-{
-	mega_ext_passthru	*epthru = NULL;
-	struct scatterlist	*sgl;
-	Scsi_Cmnd	*cmd = NULL;
-	mega_passthru	*pthru = NULL;
-	mbox_t	*mbox = NULL;
-	u8	c;
-	scb_t	*scb;
-	int	islogical;
-	int	cmdid;
-	int	i;
-
-	/*
-	 * for all the commands completed, call the mid-layer callback routine
-	 * and free the scb.
-	 */
-	for( i = 0; i < nstatus; i++ ) {
-
-		cmdid = completed[i];
-
-		/*
-		 * Only free SCBs for the commands coming down from the
-		 * mid-layer, not for which were issued internally
-		 *
-		 * For internal command, restore the status returned by the
-		 * firmware so that user can interpret it.
-		 */
-		if (cmdid == CMDID_INT_CMDS) {
-			scb = &adapter->int_scb;
-
-			list_del_init(&scb->list);
-			scb->state = SCB_FREE;
-
-			adapter->int_status = status;
-			complete(&adapter->int_waitq);
-		} else {
-			scb = &adapter->scb_list[cmdid];
-
-			/*
-			 * Make sure f/w has completed a valid command
-			 */
-			if( !(scb->state & SCB_ISSUED) || scb->cmd == NULL ) {
-				dev_crit(&adapter->dev->dev, "invalid command "
-					"Id %d, scb->state:%x, scsi cmd:%p\n",
-					cmdid, scb->state, scb->cmd);
-
-				continue;
-			}
-
-			/*
-			 * Was a abort issued for this command
-			 */
-			if( scb->state & SCB_ABORT ) {
-
-				dev_warn(&adapter->dev->dev,
-					"aborted cmd [%x] complete\n",
-					scb->idx);
-
-				scb->cmd->result = (DID_ABORT << 16);
-
-				list_add_tail(SCSI_LIST(scb->cmd),
-						&adapter->completed_list);
-
-				mega_free_scb(adapter, scb);
-
-				continue;
-			}
-
-			/*
-			 * Was a reset issued for this command
-			 */
-			if( scb->state & SCB_RESET ) {
-
-				dev_warn(&adapter->dev->dev,
-					"reset cmd [%x] complete\n",
-					scb->idx);
-
-				scb->cmd->result = (DID_RESET << 16);
-
-				list_add_tail(SCSI_LIST(scb->cmd),
-						&adapter->completed_list);
-
-				mega_free_scb (adapter, scb);
-
-				continue;
-			}
-
-			cmd = scb->cmd;
-			pthru = scb->pthru;
-			epthru = scb->epthru;
-			mbox = (mbox_t *)scb->raw_mbox;
-
-#if MEGA_HAVE_STATS
-			{
-
-			int	logdrv = mbox->m_out.logdrv;
-
-			islogical = adapter->logdrv_chan[cmd->channel];
-			/*
-			 * Maintain an error counter for the logical drive.
-			 * Some application like SNMP agent need such
-			 * statistics
-			 */
-			if( status && islogical && (cmd->cmnd[0] == READ_6 ||
-						cmd->cmnd[0] == READ_10 ||
-						cmd->cmnd[0] == READ_12)) {
-				/*
-				 * Logical drive number increases by 0x80 when
-				 * a logical drive is deleted
-				 */
-				adapter->rd_errors[logdrv%0x80]++;
-			}
-
-			if( status && islogical && (cmd->cmnd[0] == WRITE_6 ||
-						cmd->cmnd[0] == WRITE_10 ||
-						cmd->cmnd[0] == WRITE_12)) {
-				/*
-				 * Logical drive number increases by 0x80 when
-				 * a logical drive is deleted
-				 */
-				adapter->wr_errors[logdrv%0x80]++;
-			}
-
-			}
-#endif
-		}
-
-		/*
-		 * Do not return the presence of hard disk on the channel so,
-		 * inquiry sent, and returned data==hard disk or removable
-		 * hard disk and not logical, request should return failure! -
-		 * PJ
-		 */
-		islogical = adapter->logdrv_chan[cmd->device->channel];
-		if( cmd->cmnd[0] == INQUIRY && !islogical ) {
-
-			sgl = scsi_sglist(cmd);
-			if( sg_page(sgl) ) {
-				c = *(unsigned char *) sg_virt(&sgl[0]);
-			} else {
-				dev_warn(&adapter->dev->dev, "invalid sg\n");
-				c = 0;
-			}
-
-			if(IS_RAID_CH(adapter, cmd->device->channel) &&
-					((c & 0x1F ) == TYPE_DISK)) {
-				status = 0xF0;
-			}
-		}
-
-		/* clear result; otherwise, success returns corrupt value */
-		cmd->result = 0;
-
-		/* Convert MegaRAID status to Linux error code */
-		switch (status) {
-		case 0x00:	/* SUCCESS , i.e. SCSI_STATUS_GOOD */
-			cmd->result |= (DID_OK << 16);
-			break;
-
-		case 0x02:	/* ERROR_ABORTED, i.e.
-				   SCSI_STATUS_CHECK_CONDITION */
-
-			/* set sense_buffer and result fields */
-			if( mbox->m_out.cmd == MEGA_MBOXCMD_PASSTHRU ||
-				mbox->m_out.cmd == MEGA_MBOXCMD_PASSTHRU64 ) {
-
-				memcpy(cmd->sense_buffer, pthru->reqsensearea,
-						14);
-
-				cmd->result = (DRIVER_SENSE << 24) |
-					(DID_OK << 16) |
-					(CHECK_CONDITION << 1);
-			}
-			else {
-				if (mbox->m_out.cmd == MEGA_MBOXCMD_EXTPTHRU) {
-
-					memcpy(cmd->sense_buffer,
-						epthru->reqsensearea, 14);
-
-					cmd->result = (DRIVER_SENSE << 24) |
-						(DID_OK << 16) |
-						(CHECK_CONDITION << 1);
-				} else {
-					cmd->sense_buffer[0] = 0x70;
-					cmd->sense_buffer[2] = ABORTED_COMMAND;
-					cmd->result |= (CHECK_CONDITION << 1);
-				}
-			}
-			break;
-
-		case 0x08:	/* ERR_DEST_DRIVE_FAILED, i.e.
-				   SCSI_STATUS_BUSY */
-			cmd->result |= (DID_BUS_BUSY << 16) | status;
-			break;
-
-		default:
-#if MEGA_HAVE_CLUSTERING
-			/*
-			 * If TEST_UNIT_READY fails, we know
-			 * MEGA_RESERVATION_STATUS failed
-			 */
-			if( cmd->cmnd[0] == TEST_UNIT_READY ) {
-				cmd->result |= (DID_ERROR << 16) |
-					(RESERVATION_CONFLICT << 1);
-			}
-			else
-			/*
-			 * Error code returned is 1 if Reserve or Release
-			 * failed or the input parameter is invalid
-			 */
-			if( status == 1 &&
-				(cmd->cmnd[0] == RESERVE ||
-					 cmd->cmnd[0] == RELEASE) ) {
-
-				cmd->result |= (DID_ERROR << 16) |
-					(RESERVATION_CONFLICT << 1);
-			}
-			else
-#endif
-				cmd->result |= (DID_BAD_TARGET << 16)|status;
-		}
-
-		mega_free_scb(adapter, scb);
-
-		/* Add Scsi_Command to end of completed queue */
-		list_add_tail(SCSI_LIST(cmd), &adapter->completed_list);
-	}
-}
-
-
-/*
- * mega_runpendq()
- *
- * Run through the list of completed requests and finish it
- */
-static void
-mega_rundoneq (adapter_t *adapter)
-{
-	Scsi_Cmnd *cmd;
-	struct list_head *pos;
-
-	list_for_each(pos, &adapter->completed_list) {
-
-		struct scsi_pointer* spos = (struct scsi_pointer *)pos;
-
-		cmd = list_entry(spos, Scsi_Cmnd, SCp);
-		cmd->scsi_done(cmd);
-	}
-
-	INIT_LIST_HEAD(&adapter->completed_list);
-}
-
-
-/*
- * Free a SCB structure
- * Note: We assume the scsi commands associated with this scb is not free yet.
- */
-static void
-mega_free_scb(adapter_t *adapter, scb_t *scb)
-{
-	switch( scb->dma_type ) {
-
-	case MEGA_DMA_TYPE_NONE:
-		break;
-
-	case MEGA_SGLIST:
-		scsi_dma_unmap(scb->cmd);
-		break;
-	default:
-		break;
-	}
-
-	/*
-	 * Remove from the pending list
-	 */
-	list_del_init(&scb->list);
-
-	/* Link the scb back into free list */
-	scb->state = SCB_FREE;
-	scb->cmd = NULL;
-
-	list_add(&scb->list, &adapter->free_list);
-}
-
-
-static int
-__mega_busywait_mbox (adapter_t *adapter)
-{
-	volatile mbox_t *mbox = adapter->mbox;
-	long counter;
-
-	for (counter = 0; counter < 10000; counter++) {
-		if (!mbox->m_in.busy)
-			return 0;
-		udelay(100);
-		cond_resched();
-	}
-	return -1;		/* give up after 1 second */
-}
-
-/*
- * Copies data to SGLIST
- * Note: For 64 bit cards, we need a minimum of one SG element for read/write
- */
-static int
-mega_build_sglist(adapter_t *adapter, scb_t *scb, u32 *buf, u32 *len)
-{
-	struct scatterlist *sg;
-	Scsi_Cmnd	*cmd;
-	int	sgcnt;
-	int	idx;
-
-	cmd = scb->cmd;
-
-	/*
-	 * Copy Scatter-Gather list info into controller structure.
-	 *
-	 * The number of sg elements returned must not exceed our limit
-	 */
-	sgcnt = scsi_dma_map(cmd);
-
-	scb->dma_type = MEGA_SGLIST;
-
-	BUG_ON(sgcnt > adapter->sglen || sgcnt < 0);
-
-	*len = 0;
-
-	if (scsi_sg_count(cmd) == 1 && !adapter->has_64bit_addr) {
-		sg = scsi_sglist(cmd);
-		scb->dma_h_bulkdata = sg_dma_address(sg);
-		*buf = (u32)scb->dma_h_bulkdata;
-		*len = sg_dma_len(sg);
-		return 0;
-	}
-
-	scsi_for_each_sg(cmd, sg, sgcnt, idx) {
-		if (adapter->has_64bit_addr) {
-			scb->sgl64[idx].address = sg_dma_address(sg);
-			*len += scb->sgl64[idx].length = sg_dma_len(sg);
-		} else {
-			scb->sgl[idx].address = sg_dma_address(sg);
-			*len += scb->sgl[idx].length = sg_dma_len(sg);
-		}
-	}
-
-	/* Reset pointer and length fields */
-	*buf = scb->sgl_dma_addr;
-
-	/* Return count of SG requests */
-	return sgcnt;
-}
-
-
-/*
- * mega_8_to_40ld()
- *
- * takes all info in AdapterInquiry structure and puts it into ProductInfo and
- * Enquiry3 structures for later use
- */
-static void
-mega_8_to_40ld(mraid_inquiry *inquiry, mega_inquiry3 *enquiry3,
-		mega_product_info *product_info)
-{
-	int i;
-
-	product_info->max_commands = inquiry->adapter_info.max_commands;
-	enquiry3->rebuild_rate = inquiry->adapter_info.rebuild_rate;
-	product_info->nchannels = inquiry->adapter_info.nchannels;
-
-	for (i = 0; i < 4; i++) {
-		product_info->fw_version[i] =
-			inquiry->adapter_info.fw_version[i];
-
-		product_info->bios_version[i] =
-			inquiry->adapter_info.bios_version[i];
-	}
-	enquiry3->cache_flush_interval =
-		inquiry->adapter_info.cache_flush_interval;
-
-	product_info->dram_size = inquiry->adapter_info.dram_size;
-
-	enquiry3->num_ldrv = inquiry->logdrv_info.num_ldrv;
-
-	for (i = 0; i < MAX_LOGICAL_DRIVES_8LD; i++) {
-		enquiry3->ldrv_size[i] = inquiry->logdrv_info.ldrv_size[i];
-		enquiry3->ldrv_prop[i] = inquiry->logdrv_info.ldrv_prop[i];
-		enquiry3->ldrv_state[i] = inquiry->logdrv_info.ldrv_state[i];
-	}
-
-	for (i = 0; i < (MAX_PHYSICAL_DRIVES); i++)
-		enquiry3->pdrv_state[i] = inquiry->pdrv_info.pdrv_state[i];
-}
-
-static inline void
-mega_free_sgl(adapter_t *adapter)
-{
-	scb_t	*scb;
-	int	i;
-
-	for(i = 0; i < adapter->max_cmds; i++) {
-
-		scb = &adapter->scb_list[i];
-
-		if( scb->sgl64 ) {
-			pci_free_consistent(adapter->dev,
-				sizeof(mega_sgl64) * adapter->sglen,
-				scb->sgl64,
-				scb->sgl_dma_addr);
-
-			scb->sgl64 = NULL;
-		}
-
-		if( scb->pthru ) {
-			pci_free_consistent(adapter->dev, sizeof(mega_passthru),
-				scb->pthru, scb->pthru_dma_addr);
-
-			scb->pthru = NULL;
-		}
-
-		if( scb->epthru ) {
-			pci_free_consistent(adapter->dev,
-				sizeof(mega_ext_passthru),
-				scb->epthru, scb->epthru_dma_addr);
-
-			scb->epthru = NULL;
-		}
-
-	}
-}
-
-
-/*
- * Get information about the card/driver
- */
-const char *
-megaraid_info(struct Scsi_Host *host)
-{
-	static char buffer[512];
-	adapter_t *adapter;
-
-	adapter = (adapter_t *)host->hostdata;
-
-	sprintf (buffer,
-		 "LSI Logic MegaRAID %s %d commands %d targs %d chans %d luns",
-		 adapter->fw_version, adapter->product_info.max_commands,
-		 adapter->host->max_id, adapter->host->max_channel,
-		 (u32)adapter->host->max_lun);
-	return buffer;
-}
-
-/*
- * Abort a previous SCSI request. Only commands on the pending list can be
- * aborted. All the commands issued to the F/W must complete.
- */
-static int
-megaraid_abort(Scsi_Cmnd *cmd)
-{
-	adapter_t	*adapter;
-	int		rval;
-
-	adapter = (adapter_t *)cmd->device->host->hostdata;
-
-	rval =  megaraid_abort_and_reset(adapter, cmd, SCB_ABORT);
-
-	/*
-	 * This is required here to complete any completed requests
-	 * to be communicated over to the mid layer.
-	 */
-	mega_rundoneq(adapter);
-
-	return rval;
-}
-
-
-static int
-megaraid_reset(struct scsi_cmnd *cmd)
-{
-	adapter_t	*adapter;
-	megacmd_t	mc;
-	int		rval;
-
-	adapter = (adapter_t *)cmd->device->host->hostdata;
-
-#if MEGA_HAVE_CLUSTERING
-	mc.cmd = MEGA_CLUSTER_CMD;
-	mc.opcode = MEGA_RESET_RESERVATIONS;
-
-	if( mega_internal_command(adapter, &mc, NULL) != 0 ) {
-		dev_warn(&adapter->dev->dev, "reservation reset failed\n");
-	}
-	else {
-		dev_info(&adapter->dev->dev, "reservation reset\n");
-	}
-#endif
-
-	spin_lock_irq(&adapter->lock);
-
-	rval =  megaraid_abort_and_reset(adapter, cmd, SCB_RESET);
-
-	/*
-	 * This is required here to complete any completed requests
-	 * to be communicated over to the mid layer.
-	 */
-	mega_rundoneq(adapter);
-	spin_unlock_irq(&adapter->lock);
-
-	return rval;
-}
-
-/**
- * megaraid_abort_and_reset()
- * @adapter - megaraid soft state
- * @cmd - scsi command to be aborted or reset
- * @aor - abort or reset flag
- *
- * Try to locate the scsi command in the pending queue. If found and is not
- * issued to the controller, abort/reset it. Otherwise return failure
- */
-static int
-megaraid_abort_and_reset(adapter_t *adapter, Scsi_Cmnd *cmd, int aor)
-{
-	struct list_head	*pos, *next;
-	scb_t			*scb;
-
-	dev_warn(&adapter->dev->dev, "%s cmd=%x <c=%d t=%d l=%d>\n",
-	     (aor == SCB_ABORT)? "ABORTING":"RESET",
-	     cmd->cmnd[0], cmd->device->channel,
-	     cmd->device->id, (u32)cmd->device->lun);
-
-	if(list_empty(&adapter->pending_list))
-		return FAILED;
-
-	list_for_each_safe(pos, next, &adapter->pending_list) {
-
-		scb = list_entry(pos, scb_t, list);
-
-		if (scb->cmd == cmd) { /* Found command */
-
-			scb->state |= aor;
-
-			/*
-			 * Check if this command has firmware ownership. If
-			 * yes, we cannot reset this command. Whenever f/w
-			 * completes this command, we will return appropriate
-			 * status from ISR.
-			 */
-			if( scb->state & SCB_ISSUED ) {
-
-				dev_warn(&adapter->dev->dev,
-					"%s[%x], fw owner\n",
-					(aor==SCB_ABORT) ? "ABORTING":"RESET",
-					scb->idx);
-
-				return FAILED;
-			}
-			else {
-
-				/*
-				 * Not yet issued! Remove from the pending
-				 * list
-				 */
-				dev_warn(&adapter->dev->dev,
-					"%s-[%x], driver owner\n",
-					(aor==SCB_ABORT) ? "ABORTING":"RESET",
-					scb->idx);
-
-				mega_free_scb(adapter, scb);
-
-				if( aor == SCB_ABORT ) {
-					cmd->result = (DID_ABORT << 16);
-				}
-				else {
-					cmd->result = (DID_RESET << 16);
-				}
-
-				list_add_tail(SCSI_LIST(cmd),
-						&adapter->completed_list);
-
-				return SUCCESS;
-			}
-		}
-	}
-
-	return FAILED;
-}
-
-static inline int
-make_local_pdev(adapter_t *adapter, struct pci_dev **pdev)
-{
-	*pdev = pci_alloc_dev(NULL);
-
-	if( *pdev == NULL ) return -1;
-
-	memcpy(*pdev, adapter->dev, sizeof(struct pci_dev));
-
-	if( pci_set_dma_mask(*pdev, DMA_BIT_MASK(32)) != 0 ) {
-		kfree(*pdev);
-		return -1;
-	}
-
-	return 0;
-}
-
-static inline void
-free_local_pdev(struct pci_dev *pdev)
-{
-	kfree(pdev);
-}
-
-/**
- * mega_allocate_inquiry()
- * @dma_handle - handle returned for dma address
- * @pdev - handle to pci device
- *
- * allocates memory for inquiry structure
- */
-static inline void *
-mega_allocate_inquiry(dma_addr_t *dma_handle, struct pci_dev *pdev)
-{
-	return pci_alloc_consistent(pdev, sizeof(mega_inquiry3), dma_handle);
-}
-
-
-static inline void
-mega_free_inquiry(void *inquiry, dma_addr_t dma_handle, struct pci_dev *pdev)
-{
-	pci_free_consistent(pdev, sizeof(mega_inquiry3), inquiry, dma_handle);
-}
-
-
-#ifdef CONFIG_PROC_FS
-/* Following code handles /proc fs  */
-
-/**
- * proc_show_config()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display configuration information about the controller.
- */
-static int
-proc_show_config(struct seq_file *m, void *v)
-{
-
-	adapter_t *adapter = m->private;
-
-	seq_puts(m, MEGARAID_VERSION);
-	if(adapter->product_info.product_name[0])
-		seq_printf(m, "%s\n", adapter->product_info.product_name);
-
-	seq_puts(m, "Controller Type: ");
-
-	if( adapter->flag & BOARD_MEMMAP )
-		seq_puts(m, "438/466/467/471/493/518/520/531/532\n");
-	else
-		seq_puts(m, "418/428/434\n");
-
-	if(adapter->flag & BOARD_40LD)
-		seq_puts(m, "Controller Supports 40 Logical Drives\n");
-
-	if(adapter->flag & BOARD_64BIT)
-		seq_puts(m, "Controller capable of 64-bit memory addressing\n");
-	if( adapter->has_64bit_addr )
-		seq_puts(m, "Controller using 64-bit memory addressing\n");
-	else
-		seq_puts(m, "Controller is not using 64-bit memory addressing\n");
-
-	seq_printf(m, "Base = %08lx, Irq = %d, ",
-		   adapter->base, adapter->host->irq);
-
-	seq_printf(m, "Logical Drives = %d, Channels = %d\n",
-		   adapter->numldrv, adapter->product_info.nchannels);
-
-	seq_printf(m, "Version =%s:%s, DRAM = %dMb\n",
-		   adapter->fw_version, adapter->bios_version,
-		   adapter->product_info.dram_size);
-
-	seq_printf(m, "Controller Queue Depth = %d, Driver Queue Depth = %d\n",
-		   adapter->product_info.max_commands, adapter->max_cmds);
-
-	seq_printf(m, "support_ext_cdb    = %d\n", adapter->support_ext_cdb);
-	seq_printf(m, "support_random_del = %d\n", adapter->support_random_del);
-	seq_printf(m, "boot_ldrv_enabled  = %d\n", adapter->boot_ldrv_enabled);
-	seq_printf(m, "boot_ldrv          = %d\n", adapter->boot_ldrv);
-	seq_printf(m, "boot_pdrv_enabled  = %d\n", adapter->boot_pdrv_enabled);
-	seq_printf(m, "boot_pdrv_ch       = %d\n", adapter->boot_pdrv_ch);
-	seq_printf(m, "boot_pdrv_tgt      = %d\n", adapter->boot_pdrv_tgt);
-	seq_printf(m, "quiescent          = %d\n",
-		   atomic_read(&adapter->quiescent));
-	seq_printf(m, "has_cluster        = %d\n", adapter->has_cluster);
-
-	seq_puts(m, "\nModule Parameters:\n");
-	seq_printf(m, "max_cmd_per_lun    = %d\n", max_cmd_per_lun);
-	seq_printf(m, "max_sectors_per_io = %d\n", max_sectors_per_io);
-	return 0;
-}
-
-/**
- * proc_show_stat()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display statistical information about the I/O activity.
- */
-static int
-proc_show_stat(struct seq_file *m, void *v)
-{
-	adapter_t *adapter = m->private;
-#if MEGA_HAVE_STATS
-	int	i;
-#endif
-
-	seq_puts(m, "Statistical Information for this controller\n");
-	seq_printf(m, "pend_cmds = %d\n", atomic_read(&adapter->pend_cmds));
-#if MEGA_HAVE_STATS
-	for(i = 0; i < adapter->numldrv; i++) {
-		seq_printf(m, "Logical Drive %d:\n", i);
-		seq_printf(m, "\tReads Issued = %lu, Writes Issued = %lu\n",
-			   adapter->nreads[i], adapter->nwrites[i]);
-		seq_printf(m, "\tSectors Read = %lu, Sectors Written = %lu\n",
-			   adapter->nreadblocks[i], adapter->nwriteblocks[i]);
-		seq_printf(m, "\tRead errors = %lu, Write errors = %lu\n\n",
-			   adapter->rd_errors[i], adapter->wr_errors[i]);
-	}
-#else
-	seq_puts(m, "IO and error counters not compiled in driver.\n");
-#endif
-	return 0;
-}
-
-
-/**
- * proc_show_mbox()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display mailbox information for the last command issued. This information
- * is good for debugging.
- */
-static int
-proc_show_mbox(struct seq_file *m, void *v)
-{
-	adapter_t	*adapter = m->private;
-	volatile mbox_t	*mbox = adapter->mbox;
-
-	seq_puts(m, "Contents of Mail Box Structure\n");
-	seq_printf(m, "  Fw Command   = 0x%02x\n", mbox->m_out.cmd);
-	seq_printf(m, "  Cmd Sequence = 0x%02x\n", mbox->m_out.cmdid);
-	seq_printf(m, "  No of Sectors= %04d\n", mbox->m_out.numsectors);
-	seq_printf(m, "  LBA          = 0x%02x\n", mbox->m_out.lba);
-	seq_printf(m, "  DTA          = 0x%08x\n", mbox->m_out.xferaddr);
-	seq_printf(m, "  Logical Drive= 0x%02x\n", mbox->m_out.logdrv);
-	seq_printf(m, "  No of SG Elmt= 0x%02x\n", mbox->m_out.numsgelements);
-	seq_printf(m, "  Busy         = %01x\n", mbox->m_in.busy);
-	seq_printf(m, "  Status       = 0x%02x\n", mbox->m_in.status);
-	return 0;
-}
-
-
-/**
- * proc_show_rebuild_rate()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display current rebuild rate
- */
-static int
-proc_show_rebuild_rate(struct seq_file *m, void *v)
-{
-	adapter_t	*adapter = m->private;
-	dma_addr_t	dma_handle;
-	caddr_t		inquiry;
-	struct pci_dev	*pdev;
-
-	if( make_local_pdev(adapter, &pdev) != 0 )
-		return 0;
-
-	if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL )
-		goto free_pdev;
-
-	if( mega_adapinq(adapter, dma_handle) != 0 ) {
-		seq_puts(m, "Adapter inquiry failed.\n");
-		dev_warn(&adapter->dev->dev, "inquiry failed\n");
-		goto free_inquiry;
-	}
-
-	if( adapter->flag & BOARD_40LD )
-		seq_printf(m, "Rebuild Rate: [%d%%]\n",
-			   ((mega_inquiry3 *)inquiry)->rebuild_rate);
-	else
-		seq_printf(m, "Rebuild Rate: [%d%%]\n",
-			((mraid_ext_inquiry *)
-			 inquiry)->raid_inq.adapter_info.rebuild_rate);
-
-free_inquiry:
-	mega_free_inquiry(inquiry, dma_handle, pdev);
-free_pdev:
-	free_local_pdev(pdev);
-	return 0;
-}
-
-
-/**
- * proc_show_battery()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display information about the battery module on the controller.
- */
-static int
-proc_show_battery(struct seq_file *m, void *v)
-{
-	adapter_t	*adapter = m->private;
-	dma_addr_t	dma_handle;
-	caddr_t		inquiry;
-	struct pci_dev	*pdev;
-	u8	battery_status;
-
-	if( make_local_pdev(adapter, &pdev) != 0 )
-		return 0;
-
-	if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL )
-		goto free_pdev;
-
-	if( mega_adapinq(adapter, dma_handle) != 0 ) {
-		seq_puts(m, "Adapter inquiry failed.\n");
-		dev_warn(&adapter->dev->dev, "inquiry failed\n");
-		goto free_inquiry;
-	}
-
-	if( adapter->flag & BOARD_40LD ) {
-		battery_status = ((mega_inquiry3 *)inquiry)->battery_status;
-	}
-	else {
-		battery_status = ((mraid_ext_inquiry *)inquiry)->
-			raid_inq.adapter_info.battery_status;
-	}
-
-	/*
-	 * Decode the battery status
-	 */
-	seq_printf(m, "Battery Status:[%d]", battery_status);
-
-	if(battery_status == MEGA_BATT_CHARGE_DONE)
-		seq_puts(m, " Charge Done");
-
-	if(battery_status & MEGA_BATT_MODULE_MISSING)
-		seq_puts(m, " Module Missing");
-	
-	if(battery_status & MEGA_BATT_LOW_VOLTAGE)
-		seq_puts(m, " Low Voltage");
-	
-	if(battery_status & MEGA_BATT_TEMP_HIGH)
-		seq_puts(m, " Temperature High");
-	
-	if(battery_status & MEGA_BATT_PACK_MISSING)
-		seq_puts(m, " Pack Missing");
-	
-	if(battery_status & MEGA_BATT_CHARGE_INPROG)
-		seq_puts(m, " Charge In-progress");
-	
-	if(battery_status & MEGA_BATT_CHARGE_FAIL)
-		seq_puts(m, " Charge Fail");
-	
-	if(battery_status & MEGA_BATT_CYCLES_EXCEEDED)
-		seq_puts(m, " Cycles Exceeded");
-
-	seq_putc(m, '\n');
-
-free_inquiry:
-	mega_free_inquiry(inquiry, dma_handle, pdev);
-free_pdev:
-	free_local_pdev(pdev);
-	return 0;
-}
-
-
-/*
- * Display scsi inquiry
- */
-static void
-mega_print_inquiry(struct seq_file *m, char *scsi_inq)
-{
-	int	i;
-
-	seq_puts(m, "  Vendor: ");
-	seq_write(m, scsi_inq + 8, 8);
-	seq_puts(m, "  Model: ");
-	seq_write(m, scsi_inq + 16, 16);
-	seq_puts(m, "  Rev: ");
-	seq_write(m, scsi_inq + 32, 4);
-	seq_putc(m, '\n');
-
-	i = scsi_inq[0] & 0x1f;
-	seq_printf(m, "  Type:   %s ", scsi_device_type(i));
-
-	seq_printf(m, "                 ANSI SCSI revision: %02x",
-		   scsi_inq[2] & 0x07);
-
-	if( (scsi_inq[2] & 0x07) == 1 && (scsi_inq[3] & 0x0f) == 1 )
-		seq_puts(m, " CCS\n");
-	else
-		seq_putc(m, '\n');
-}
-
-/**
- * proc_show_pdrv()
- * @m - Synthetic file construction data
- * @page - buffer to write the data in
- * @adapter - pointer to our soft state
- *
- * Display information about the physical drives.
- */
-static int
-proc_show_pdrv(struct seq_file *m, adapter_t *adapter, int channel)
-{
-	dma_addr_t	dma_handle;
-	char		*scsi_inq;
-	dma_addr_t	scsi_inq_dma_handle;
-	caddr_t		inquiry;
-	struct pci_dev	*pdev;
-	u8	*pdrv_state;
-	u8	state;
-	int	tgt;
-	int	max_channels;
-	int	i;
-
-	if( make_local_pdev(adapter, &pdev) != 0 )
-		return 0;
-
-	if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL )
-		goto free_pdev;
-
-	if( mega_adapinq(adapter, dma_handle) != 0 ) {
-		seq_puts(m, "Adapter inquiry failed.\n");
-		dev_warn(&adapter->dev->dev, "inquiry failed\n");
-		goto free_inquiry;
-	}
-
-
-	scsi_inq = pci_alloc_consistent(pdev, 256, &scsi_inq_dma_handle);
-	if( scsi_inq == NULL ) {
-		seq_puts(m, "memory not available for scsi inq.\n");
-		goto free_inquiry;
-	}
-
-	if( adapter->flag & BOARD_40LD ) {
-		pdrv_state = ((mega_inquiry3 *)inquiry)->pdrv_state;
-	}
-	else {
-		pdrv_state = ((mraid_ext_inquiry *)inquiry)->
-			raid_inq.pdrv_info.pdrv_state;
-	}
-
-	max_channels = adapter->product_info.nchannels;
-
-	if( channel >= max_channels ) {
-		goto free_pci;
-	}
-
-	for( tgt = 0; tgt <= MAX_TARGET; tgt++ ) {
-
-		i = channel*16 + tgt;
-
-		state = *(pdrv_state + i);
-		switch( state & 0x0F ) {
-		case PDRV_ONLINE:
-			seq_printf(m, "Channel:%2d Id:%2d State: Online",
-				   channel, tgt);
-			break;
-
-		case PDRV_FAILED:
-			seq_printf(m, "Channel:%2d Id:%2d State: Failed",
-				   channel, tgt);
-			break;
-
-		case PDRV_RBLD:
-			seq_printf(m, "Channel:%2d Id:%2d State: Rebuild",
-				   channel, tgt);
-			break;
-
-		case PDRV_HOTSPARE:
-			seq_printf(m, "Channel:%2d Id:%2d State: Hot spare",
-				   channel, tgt);
-			break;
-
-		default:
-			seq_printf(m, "Channel:%2d Id:%2d State: Un-configured",
-				   channel, tgt);
-			break;
-		}
-
-		/*
-		 * This interface displays inquiries for disk drives
-		 * only. Inquries for logical drives and non-disk
-		 * devices are available through /proc/scsi/scsi
-		 */
-		memset(scsi_inq, 0, 256);
-		if( mega_internal_dev_inquiry(adapter, channel, tgt,
-				scsi_inq_dma_handle) ||
-				(scsi_inq[0] & 0x1F) != TYPE_DISK ) {
-			continue;
-		}
-
-		/*
-		 * Check for overflow. We print less than 240
-		 * characters for inquiry
-		 */
-		seq_puts(m, ".\n");
-		mega_print_inquiry(m, scsi_inq);
-	}
-
-free_pci:
-	pci_free_consistent(pdev, 256, scsi_inq, scsi_inq_dma_handle);
-free_inquiry:
-	mega_free_inquiry(inquiry, dma_handle, pdev);
-free_pdev:
-	free_local_pdev(pdev);
-	return 0;
-}
-
-/**
- * proc_show_pdrv_ch0()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display information about the physical drives on physical channel 0.
- */
-static int
-proc_show_pdrv_ch0(struct seq_file *m, void *v)
-{
-	return proc_show_pdrv(m, m->private, 0);
-}
-
-
-/**
- * proc_show_pdrv_ch1()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display information about the physical drives on physical channel 1.
- */
-static int
-proc_show_pdrv_ch1(struct seq_file *m, void *v)
-{
-	return proc_show_pdrv(m, m->private, 1);
-}
-
-
-/**
- * proc_show_pdrv_ch2()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display information about the physical drives on physical channel 2.
- */
-static int
-proc_show_pdrv_ch2(struct seq_file *m, void *v)
-{
-	return proc_show_pdrv(m, m->private, 2);
-}
-
-
-/**
- * proc_show_pdrv_ch3()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display information about the physical drives on physical channel 3.
- */
-static int
-proc_show_pdrv_ch3(struct seq_file *m, void *v)
-{
-	return proc_show_pdrv(m, m->private, 3);
-}
-
-
-/**
- * proc_show_rdrv()
- * @m - Synthetic file construction data
- * @adapter - pointer to our soft state
- * @start - starting logical drive to display
- * @end - ending logical drive to display
- *
- * We do not print the inquiry information since its already available through
- * /proc/scsi/scsi interface
- */
-static int
-proc_show_rdrv(struct seq_file *m, adapter_t *adapter, int start, int end )
-{
-	dma_addr_t	dma_handle;
-	logdrv_param	*lparam;
-	megacmd_t	mc;
-	char		*disk_array;
-	dma_addr_t	disk_array_dma_handle;
-	caddr_t		inquiry;
-	struct pci_dev	*pdev;
-	u8	*rdrv_state;
-	int	num_ldrv;
-	u32	array_sz;
-	int	i;
-
-	if( make_local_pdev(adapter, &pdev) != 0 )
-		return 0;
-
-	if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL )
-		goto free_pdev;
-
-	if( mega_adapinq(adapter, dma_handle) != 0 ) {
-		seq_puts(m, "Adapter inquiry failed.\n");
-		dev_warn(&adapter->dev->dev, "inquiry failed\n");
-		goto free_inquiry;
-	}
-
-	memset(&mc, 0, sizeof(megacmd_t));
-
-	if( adapter->flag & BOARD_40LD ) {
-		array_sz = sizeof(disk_array_40ld);
-
-		rdrv_state = ((mega_inquiry3 *)inquiry)->ldrv_state;
-
-		num_ldrv = ((mega_inquiry3 *)inquiry)->num_ldrv;
-	}
-	else {
-		array_sz = sizeof(disk_array_8ld);
-
-		rdrv_state = ((mraid_ext_inquiry *)inquiry)->
-			raid_inq.logdrv_info.ldrv_state;
-
-		num_ldrv = ((mraid_ext_inquiry *)inquiry)->
-			raid_inq.logdrv_info.num_ldrv;
-	}
-
-	disk_array = pci_alloc_consistent(pdev, array_sz,
-			&disk_array_dma_handle);
-
-	if( disk_array == NULL ) {
-		seq_puts(m, "memory not available.\n");
-		goto free_inquiry;
-	}
-
-	mc.xferaddr = (u32)disk_array_dma_handle;
-
-	if( adapter->flag & BOARD_40LD ) {
-		mc.cmd = FC_NEW_CONFIG;
-		mc.opcode = OP_DCMD_READ_CONFIG;
-
-		if( mega_internal_command(adapter, &mc, NULL) ) {
-			seq_puts(m, "40LD read config failed.\n");
-			goto free_pci;
-		}
-
-	}
-	else {
-		mc.cmd = NEW_READ_CONFIG_8LD;
-
-		if( mega_internal_command(adapter, &mc, NULL) ) {
-			mc.cmd = READ_CONFIG_8LD;
-			if( mega_internal_command(adapter, &mc, NULL) ) {
-				seq_puts(m, "8LD read config failed.\n");
-				goto free_pci;
-			}
-		}
-	}
-
-	for( i = start; i < ( (end+1 < num_ldrv) ? end+1 : num_ldrv ); i++ ) {
-
-		if( adapter->flag & BOARD_40LD ) {
-			lparam =
-			&((disk_array_40ld *)disk_array)->ldrv[i].lparam;
-		}
-		else {
-			lparam =
-			&((disk_array_8ld *)disk_array)->ldrv[i].lparam;
-		}
-
-		/*
-		 * Check for overflow. We print less than 240 characters for
-		 * information about each logical drive.
-		 */
-		seq_printf(m, "Logical drive:%2d:, ", i);
-
-		switch( rdrv_state[i] & 0x0F ) {
-		case RDRV_OFFLINE:
-			seq_puts(m, "state: offline");
-			break;
-		case RDRV_DEGRADED:
-			seq_puts(m, "state: degraded");
-			break;
-		case RDRV_OPTIMAL:
-			seq_puts(m, "state: optimal");
-			break;
-		case RDRV_DELETED:
-			seq_puts(m, "state: deleted");
-			break;
-		default:
-			seq_puts(m, "state: unknown");
-			break;
-		}
-
-		/*
-		 * Check if check consistency or initialization is going on
-		 * for this logical drive.
-		 */
-		if( (rdrv_state[i] & 0xF0) == 0x20 )
-			seq_puts(m, ", check-consistency in progress");
-		else if( (rdrv_state[i] & 0xF0) == 0x10 )
-			seq_puts(m, ", initialization in progress");
-		
-		seq_putc(m, '\n');
-
-		seq_printf(m, "Span depth:%3d, ", lparam->span_depth);
-		seq_printf(m, "RAID level:%3d, ", lparam->level);
-		seq_printf(m, "Stripe size:%3d, ",
-			   lparam->stripe_sz ? lparam->stripe_sz/2: 128);
-		seq_printf(m, "Row size:%3d\n", lparam->row_size);
-
-		seq_puts(m, "Read Policy: ");
-		switch(lparam->read_ahead) {
-		case NO_READ_AHEAD:
-			seq_puts(m, "No read ahead, ");
-			break;
-		case READ_AHEAD:
-			seq_puts(m, "Read ahead, ");
-			break;
-		case ADAP_READ_AHEAD:
-			seq_puts(m, "Adaptive, ");
-			break;
-
-		}
-
-		seq_puts(m, "Write Policy: ");
-		switch(lparam->write_mode) {
-		case WRMODE_WRITE_THRU:
-			seq_puts(m, "Write thru, ");
-			break;
-		case WRMODE_WRITE_BACK:
-			seq_puts(m, "Write back, ");
-			break;
-		}
-
-		seq_puts(m, "Cache Policy: ");
-		switch(lparam->direct_io) {
-		case CACHED_IO:
-			seq_puts(m, "Cached IO\n\n");
-			break;
-		case DIRECT_IO:
-			seq_puts(m, "Direct IO\n\n");
-			break;
-		}
-	}
-
-free_pci:
-	pci_free_consistent(pdev, array_sz, disk_array,
-			disk_array_dma_handle);
-free_inquiry:
-	mega_free_inquiry(inquiry, dma_handle, pdev);
-free_pdev:
-	free_local_pdev(pdev);
-	return 0;
-}
-
-/**
- * proc_show_rdrv_10()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display real time information about the logical drives 0 through 9.
- */
-static int
-proc_show_rdrv_10(struct seq_file *m, void *v)
-{
-	return proc_show_rdrv(m, m->private, 0, 9);
-}
-
-
-/**
- * proc_show_rdrv_20()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display real time information about the logical drives 0 through 9.
- */
-static int
-proc_show_rdrv_20(struct seq_file *m, void *v)
-{
-	return proc_show_rdrv(m, m->private, 10, 19);
-}
-
-
-/**
- * proc_show_rdrv_30()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display real time information about the logical drives 0 through 9.
- */
-static int
-proc_show_rdrv_30(struct seq_file *m, void *v)
-{
-	return proc_show_rdrv(m, m->private, 20, 29);
-}
-
-
-/**
- * proc_show_rdrv_40()
- * @m - Synthetic file construction data
- * @v - File iterator
- *
- * Display real time information about the logical drives 0 through 9.
- */
-static int
-proc_show_rdrv_40(struct seq_file *m, void *v)
-{
-	return proc_show_rdrv(m, m->private, 30, 39);
-}
-
-
-/*
- * seq_file wrappers for procfile show routines.
- */
-static int mega_proc_open(struct inode *inode, struct file *file)
-{
-	adapter_t *adapter = proc_get_parent_data(inode);
-	int (*show)(struct seq_file *, void *) = PDE_DATA(inode);
-
-	return single_open(file, show, adapter);
-}
-
-static const struct file_operations mega_proc_fops = {
-	.open		= mega_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-/*
- * Table of proc files we need to create.
- */
-struct mega_proc_file {
-	const char *name;
-	unsigned short ptr_offset;
-	int (*show) (struct seq_file *m, void *v);
-};
-
-static const struct mega_proc_file mega_proc_files[] = {
-	{ "config",	      offsetof(adapter_t, proc_read), proc_show_config },
-	{ "stat",	      offsetof(adapter_t, proc_stat), proc_show_stat },
-	{ "mailbox",	      offsetof(adapter_t, proc_mbox), proc_show_mbox },
-#if MEGA_HAVE_ENH_PROC
-	{ "rebuild-rate",     offsetof(adapter_t, proc_rr), proc_show_rebuild_rate },
-	{ "battery-status",   offsetof(adapter_t, proc_battery), proc_show_battery },
-	{ "diskdrives-ch0",   offsetof(adapter_t, proc_pdrvstat[0]), proc_show_pdrv_ch0 },
-	{ "diskdrives-ch1",   offsetof(adapter_t, proc_pdrvstat[1]), proc_show_pdrv_ch1 },
-	{ "diskdrives-ch2",   offsetof(adapter_t, proc_pdrvstat[2]), proc_show_pdrv_ch2 },
-	{ "diskdrives-ch3",   offsetof(adapter_t, proc_pdrvstat[3]), proc_show_pdrv_ch3 },
-	{ "raiddrives-0-9",   offsetof(adapter_t, proc_rdrvstat[0]), proc_show_rdrv_10 },
-	{ "raiddrives-10-19", offsetof(adapter_t, proc_rdrvstat[1]), proc_show_rdrv_20 },
-	{ "raiddrives-20-29", offsetof(adapter_t, proc_rdrvstat[2]), proc_show_rdrv_30 },
-	{ "raiddrives-30-39", offsetof(adapter_t, proc_rdrvstat[3]), proc_show_rdrv_40 },
-#endif
-	{ NULL }
-};
-
-/**
- * mega_create_proc_entry()
- * @index - index in soft state array
- * @parent - parent node for this /proc entry
- *
- * Creates /proc entries for our controllers.
- */
-static void
-mega_create_proc_entry(int index, struct proc_dir_entry *parent)
-{
-	const struct mega_proc_file *f;
-	adapter_t	*adapter = hba_soft_state[index];
-	struct proc_dir_entry	*dir, *de, **ppde;
-	u8		string[16];
-
-	sprintf(string, "hba%d", adapter->host->host_no);
-
-	dir = adapter->controller_proc_dir_entry =
-		proc_mkdir_data(string, 0, parent, adapter);
-	if(!dir) {
-		dev_warn(&adapter->dev->dev, "proc_mkdir failed\n");
-		return;
-	}
-
-	for (f = mega_proc_files; f->name; f++) {
-		de = proc_create_data(f->name, S_IRUSR, dir, &mega_proc_fops,
-				      f->show);
-		if (!de) {
-			dev_warn(&adapter->dev->dev, "proc_create failed\n");
-			return;
-		}
-
-		ppde = (void *)adapter + f->ptr_offset;
-		*ppde = de;
-	}
-}
-
-#else
-static inline void mega_create_proc_entry(int index, struct proc_dir_entry *parent)
-{
-}
-#endif
-
-
-/**
- * megaraid_biosparam()
- *
- * Return the disk geometry for a particular disk
- */
-static int
-megaraid_biosparam(struct scsi_device *sdev, struct block_device *bdev,
-		    sector_t capacity, int geom[])
-{
-	adapter_t	*adapter;
-	unsigned char	*bh;
-	int	heads;
-	int	sectors;
-	int	cylinders;
-	int	rval;
-
-	/* Get pointer to host config structure */
-	adapter = (adapter_t *)sdev->host->hostdata;
-
-	if (IS_RAID_CH(adapter, sdev->channel)) {
-			/* Default heads (64) & sectors (32) */
-			heads = 64;
-			sectors = 32;
-			cylinders = (ulong)capacity / (heads * sectors);
-
-			/*
-			 * Handle extended translation size for logical drives
-			 * > 1Gb
-			 */
-			if ((ulong)capacity >= 0x200000) {
-				heads = 255;
-				sectors = 63;
-				cylinders = (ulong)capacity / (heads * sectors);
-			}
-
-			/* return result */
-			geom[0] = heads;
-			geom[1] = sectors;
-			geom[2] = cylinders;
-	}
-	else {
-		bh = scsi_bios_ptable(bdev);
-
-		if( bh ) {
-			rval = scsi_partsize(bh, capacity,
-					    &geom[2], &geom[0], &geom[1]);
-			kfree(bh);
-			if( rval != -1 )
-				return rval;
-		}
-
-		dev_info(&adapter->dev->dev,
-			 "invalid partition on this disk on channel %d\n",
-			 sdev->channel);
-
-		/* Default heads (64) & sectors (32) */
-		heads = 64;
-		sectors = 32;
-		cylinders = (ulong)capacity / (heads * sectors);
-
-		/* Handle extended translation size for logical drives > 1Gb */
-		if ((ulong)capacity >= 0x200000) {
-			heads = 255;
-			sectors = 63;
-			cylinders = (ulong)capacity / (heads * sectors);
-		}
-
-		/* return result */
-		geom[0] = heads;
-		geom[1] = sectors;
-		geom[2] = cylinders;
-	}
-
-	return 0;
-}
-
-/**
- * mega_init_scb()
- * @adapter - pointer to our soft state
- *
- * Allocate memory for the various pointers in the scb structures:
- * scatter-gather list pointer, passthru and extended passthru structure
- * pointers.
- */
-static int
-mega_init_scb(adapter_t *adapter)
-{
-	scb_t	*scb;
-	int	i;
-
-	for( i = 0; i < adapter->max_cmds; i++ ) {
-
-		scb = &adapter->scb_list[i];
-
-		scb->sgl64 = NULL;
-		scb->sgl = NULL;
-		scb->pthru = NULL;
-		scb->epthru = NULL;
-	}
-
-	for( i = 0; i < adapter->max_cmds; i++ ) {
-
-		scb = &adapter->scb_list[i];
-
-		scb->idx = i;
-
-		scb->sgl64 = pci_alloc_consistent(adapter->dev,
-				sizeof(mega_sgl64) * adapter->sglen,
-				&scb->sgl_dma_addr);
-
-		scb->sgl = (mega_sglist *)scb->sgl64;
-
-		if( !scb->sgl ) {
-			dev_warn(&adapter->dev->dev, "RAID: Can't allocate sglist\n");
-			mega_free_sgl(adapter);
-			return -1;
-		}
-
-		scb->pthru = pci_alloc_consistent(adapter->dev,
-				sizeof(mega_passthru),
-				&scb->pthru_dma_addr);
-
-		if( !scb->pthru ) {
-			dev_warn(&adapter->dev->dev, "RAID: Can't allocate passthru\n");
-			mega_free_sgl(adapter);
-			return -1;
-		}
-
-		scb->epthru = pci_alloc_consistent(adapter->dev,
-				sizeof(mega_ext_passthru),
-				&scb->epthru_dma_addr);
-
-		if( !scb->epthru ) {
-			dev_warn(&adapter->dev->dev,
-				"Can't allocate extended passthru\n");
-			mega_free_sgl(adapter);
-			return -1;
-		}
-
-
-		scb->dma_type = MEGA_DMA_TYPE_NONE;
-
-		/*
-		 * Link to free list
-		 * lock not required since we are loading the driver, so no
-		 * commands possible right now.
-		 */
-		scb->state = SCB_FREE;
-		scb->cmd = NULL;
-		list_add(&scb->list, &adapter->free_list);
-	}
-
-	return 0;
-}
-
-
-/**
- * megadev_open()
- * @inode - unused
- * @filep - unused
- *
- * Routines for the character/ioctl interface to the driver. Find out if this
- * is a valid open. 
- */
-static int
-megadev_open (struct inode *inode, struct file *filep)
-{
-	/*
-	 * Only allow superuser to access private ioctl interface
-	 */
-	if( !capable(CAP_SYS_ADMIN) ) return -EACCES;
-
-	return 0;
-}
-
-
-/**
- * megadev_ioctl()
- * @inode - Our device inode
- * @filep - unused
- * @cmd - ioctl command
- * @arg - user buffer
- *
- * ioctl entry point for our private ioctl interface. We move the data in from
- * the user space, prepare the command (if necessary, convert the old MIMD
- * ioctl to new ioctl command), and issue a synchronous command to the
- * controller.
- */
-static int
-megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
-{
-	adapter_t	*adapter;
-	nitioctl_t	uioc;
-	int		adapno;
-	int		rval;
-	mega_passthru	__user *upthru;	/* user address for passthru */
-	mega_passthru	*pthru;		/* copy user passthru here */
-	dma_addr_t	pthru_dma_hndl;
-	void		*data = NULL;	/* data to be transferred */
-	dma_addr_t	data_dma_hndl;	/* dma handle for data xfer area */
-	megacmd_t	mc;
-	megastat_t	__user *ustats;
-	int		num_ldrv;
-	u32		uxferaddr = 0;
-	struct pci_dev	*pdev;
-
-	ustats = NULL; /* avoid compilation warnings */
-	num_ldrv = 0;
-
-	/*
-	 * Make sure only USCSICMD are issued through this interface.
-	 * MIMD application would still fire different command.
-	 */
-	if( (_IOC_TYPE(cmd) != MEGAIOC_MAGIC) && (cmd != USCSICMD) ) {
-		return -EINVAL;
-	}
-
-	/*
-	 * Check and convert a possible MIMD command to NIT command.
-	 * mega_m_to_n() copies the data from the user space, so we do not
-	 * have to do it here.
-	 * NOTE: We will need some user address to copyout the data, therefore
-	 * the inteface layer will also provide us with the required user
-	 * addresses.
-	 */
-	memset(&uioc, 0, sizeof(nitioctl_t));
-	if( (rval = mega_m_to_n( (void __user *)arg, &uioc)) != 0 )
-		return rval;
-
-
-	switch( uioc.opcode ) {
-
-	case GET_DRIVER_VER:
-		if( put_user(driver_ver, (u32 __user *)uioc.uioc_uaddr) )
-			return (-EFAULT);
-
-		break;
-
-	case GET_N_ADAP:
-		if( put_user(hba_count, (u32 __user *)uioc.uioc_uaddr) )
-			return (-EFAULT);
-
-		/*
-		 * Shucks. MIMD interface returns a positive value for number
-		 * of adapters. TODO: Change it to return 0 when there is no
-		 * applicatio using mimd interface.
-		 */
-		return hba_count;
-
-	case GET_ADAP_INFO:
-
-		/*
-		 * Which adapter
-		 */
-		if( (adapno = GETADAP(uioc.adapno)) >= hba_count )
-			return (-ENODEV);
-
-		if( copy_to_user(uioc.uioc_uaddr, mcontroller+adapno,
-				sizeof(struct mcontroller)) )
-			return (-EFAULT);
-		break;
-
-#if MEGA_HAVE_STATS
-
-	case GET_STATS:
-		/*
-		 * Which adapter
-		 */
-		if( (adapno = GETADAP(uioc.adapno)) >= hba_count )
-			return (-ENODEV);
-
-		adapter = hba_soft_state[adapno];
-
-		ustats = uioc.uioc_uaddr;
-
-		if( copy_from_user(&num_ldrv, &ustats->num_ldrv, sizeof(int)) )
-			return (-EFAULT);
-
-		/*
-		 * Check for the validity of the logical drive number
-		 */
-		if( num_ldrv >= MAX_LOGICAL_DRIVES_40LD ) return -EINVAL;
-
-		if( copy_to_user(ustats->nreads, adapter->nreads,
-					num_ldrv*sizeof(u32)) )
-			return -EFAULT;
-
-		if( copy_to_user(ustats->nreadblocks, adapter->nreadblocks,
-					num_ldrv*sizeof(u32)) )
-			return -EFAULT;
-
-		if( copy_to_user(ustats->nwrites, adapter->nwrites,
-					num_ldrv*sizeof(u32)) )
-			return -EFAULT;
-
-		if( copy_to_user(ustats->nwriteblocks, adapter->nwriteblocks,
-					num_ldrv*sizeof(u32)) )
-			return -EFAULT;
-
-		if( copy_to_user(ustats->rd_errors, adapter->rd_errors,
-					num_ldrv*sizeof(u32)) )
-			return -EFAULT;
-
-		if( copy_to_user(ustats->wr_errors, adapter->wr_errors,
-					num_ldrv*sizeof(u32)) )
-			return -EFAULT;
-
-		return 0;
-
-#endif
-	case MBOX_CMD:
-
-		/*
-		 * Which adapter
-		 */
-		if( (adapno = GETADAP(uioc.adapno)) >= hba_count )
-			return (-ENODEV);
-
-		adapter = hba_soft_state[adapno];
-
-		/*
-		 * Deletion of logical drive is a special case. The adapter
-		 * should be quiescent before this command is issued.
-		 */
-		if( uioc.uioc_rmbox[0] == FC_DEL_LOGDRV &&
-				uioc.uioc_rmbox[2] == OP_DEL_LOGDRV ) {
-
-			/*
-			 * Do we support this feature
-			 */
-			if( !adapter->support_random_del ) {
-				dev_warn(&adapter->dev->dev, "logdrv "
-					"delete on non-supporting F/W\n");
-
-				return (-EINVAL);
-			}
-
-			rval = mega_del_logdrv( adapter, uioc.uioc_rmbox[3] );
-
-			if( rval == 0 ) {
-				memset(&mc, 0, sizeof(megacmd_t));
-
-				mc.status = rval;
-
-				rval = mega_n_to_m((void __user *)arg, &mc);
-			}
-
-			return rval;
-		}
-		/*
-		 * This interface only support the regular passthru commands.
-		 * Reject extended passthru and 64-bit passthru
-		 */
-		if( uioc.uioc_rmbox[0] == MEGA_MBOXCMD_PASSTHRU64 ||
-			uioc.uioc_rmbox[0] == MEGA_MBOXCMD_EXTPTHRU ) {
-
-			dev_warn(&adapter->dev->dev, "rejected passthru\n");
-
-			return (-EINVAL);
-		}
-
-		/*
-		 * For all internal commands, the buffer must be allocated in
-		 * <4GB address range
-		 */
-		if( make_local_pdev(adapter, &pdev) != 0 )
-			return -EIO;
-
-		/* Is it a passthru command or a DCMD */
-		if( uioc.uioc_rmbox[0] == MEGA_MBOXCMD_PASSTHRU ) {
-			/* Passthru commands */
-
-			pthru = pci_alloc_consistent(pdev,
-					sizeof(mega_passthru),
-					&pthru_dma_hndl);
-
-			if( pthru == NULL ) {
-				free_local_pdev(pdev);
-				return (-ENOMEM);
-			}
-
-			/*
-			 * The user passthru structure
-			 */
-			upthru = (mega_passthru __user *)(unsigned long)MBOX(uioc)->xferaddr;
-
-			/*
-			 * Copy in the user passthru here.
-			 */
-			if( copy_from_user(pthru, upthru,
-						sizeof(mega_passthru)) ) {
-
-				pci_free_consistent(pdev,
-						sizeof(mega_passthru), pthru,
-						pthru_dma_hndl);
-
-				free_local_pdev(pdev);
-
-				return (-EFAULT);
-			}
-
-			/*
-			 * Is there a data transfer
-			 */
-			if( pthru->dataxferlen ) {
-				data = pci_alloc_consistent(pdev,
-						pthru->dataxferlen,
-						&data_dma_hndl);
-
-				if( data == NULL ) {
-					pci_free_consistent(pdev,
-							sizeof(mega_passthru),
-							pthru,
-							pthru_dma_hndl);
-
-					free_local_pdev(pdev);
-
-					return (-ENOMEM);
-				}
-
-				/*
-				 * Save the user address and point the kernel
-				 * address at just allocated memory
-				 */
-				uxferaddr = pthru->dataxferaddr;
-				pthru->dataxferaddr = data_dma_hndl;
-			}
-
-
-			/*
-			 * Is data coming down-stream
-			 */
-			if( pthru->dataxferlen && (uioc.flags & UIOC_WR) ) {
-				/*
-				 * Get the user data
-				 */
-				if( copy_from_user(data, (char __user *)(unsigned long) uxferaddr,
-							pthru->dataxferlen) ) {
-					rval = (-EFAULT);
-					goto freemem_and_return;
-				}
-			}
-
-			memset(&mc, 0, sizeof(megacmd_t));
-
-			mc.cmd = MEGA_MBOXCMD_PASSTHRU;
-			mc.xferaddr = (u32)pthru_dma_hndl;
-
-			/*
-			 * Issue the command
-			 */
-			mega_internal_command(adapter, &mc, pthru);
-
-			rval = mega_n_to_m((void __user *)arg, &mc);
-
-			if( rval ) goto freemem_and_return;
-
-
-			/*
-			 * Is data going up-stream
-			 */
-			if( pthru->dataxferlen && (uioc.flags & UIOC_RD) ) {
-				if( copy_to_user((char __user *)(unsigned long) uxferaddr, data,
-							pthru->dataxferlen) ) {
-					rval = (-EFAULT);
-				}
-			}
-
-			/*
-			 * Send the request sense data also, irrespective of
-			 * whether the user has asked for it or not.
-			 */
-			if (copy_to_user(upthru->reqsensearea,
-					pthru->reqsensearea, 14))
-				rval = -EFAULT;
-
-freemem_and_return:
-			if( pthru->dataxferlen ) {
-				pci_free_consistent(pdev,
-						pthru->dataxferlen, data,
-						data_dma_hndl);
-			}
-
-			pci_free_consistent(pdev, sizeof(mega_passthru),
-					pthru, pthru_dma_hndl);
-
-			free_local_pdev(pdev);
-
-			return rval;
-		}
-		else {
-			/* DCMD commands */
-
-			/*
-			 * Is there a data transfer
-			 */
-			if( uioc.xferlen ) {
-				data = pci_alloc_consistent(pdev,
-						uioc.xferlen, &data_dma_hndl);
-
-				if( data == NULL ) {
-					free_local_pdev(pdev);
-					return (-ENOMEM);
-				}
-
-				uxferaddr = MBOX(uioc)->xferaddr;
-			}
-
-			/*
-			 * Is data coming down-stream
-			 */
-			if( uioc.xferlen && (uioc.flags & UIOC_WR) ) {
-				/*
-				 * Get the user data
-				 */
-				if( copy_from_user(data, (char __user *)(unsigned long) uxferaddr,
-							uioc.xferlen) ) {
-
-					pci_free_consistent(pdev,
-							uioc.xferlen,
-							data, data_dma_hndl);
-
-					free_local_pdev(pdev);
-
-					return (-EFAULT);
-				}
-			}
-
-			memcpy(&mc, MBOX(uioc), sizeof(megacmd_t));
-
-			mc.xferaddr = (u32)data_dma_hndl;
-
-			/*
-			 * Issue the command
-			 */
-			mega_internal_command(adapter, &mc, NULL);
-
-			rval = mega_n_to_m((void __user *)arg, &mc);
-
-			if( rval ) {
-				if( uioc.xferlen ) {
-					pci_free_consistent(pdev,
-							uioc.xferlen, data,
-							data_dma_hndl);
-				}
-
-				free_local_pdev(pdev);
-
-				return rval;
-			}
-
-			/*
-			 * Is data going up-stream
-			 */
-			if( uioc.xferlen && (uioc.flags & UIOC_RD) ) {
-				if( copy_to_user((char __user *)(unsigned long) uxferaddr, data,
-							uioc.xferlen) ) {
-
-					rval = (-EFAULT);
-				}
-			}
-
-			if( uioc.xferlen ) {
-				pci_free_consistent(pdev,
-						uioc.xferlen, data,
-						data_dma_hndl);
-			}
-
-			free_local_pdev(pdev);
-
-			return rval;
-		}
-
-	default:
-		return (-EINVAL);
-	}
-
-	return 0;
-}
-
-static long
-megadev_unlocked_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
-{
-	int ret;
-
-	mutex_lock(&megadev_mutex);
-	ret = megadev_ioctl(filep, cmd, arg);
-	mutex_unlock(&megadev_mutex);
-
-	return ret;
-}
-
-/**
- * mega_m_to_n()
- * @arg - user address
- * @uioc - new ioctl structure
- *
- * A thin layer to convert older mimd interface ioctl structure to NIT ioctl
- * structure
- *
- * Converts the older mimd ioctl structure to newer NIT structure
- */
-static int
-mega_m_to_n(void __user *arg, nitioctl_t *uioc)
-{
-	struct uioctl_t	uioc_mimd;
-	char	signature[8] = {0};
-	u8	opcode;
-	u8	subopcode;
-
-
-	/*
-	 * check is the application conforms to NIT. We do not have to do much
-	 * in that case.
-	 * We exploit the fact that the signature is stored in the very
-	 * beginning of the structure.
-	 */
-
-	if( copy_from_user(signature, arg, 7) )
-		return (-EFAULT);
-
-	if( memcmp(signature, "MEGANIT", 7) == 0 ) {
-
-		/*
-		 * NOTE NOTE: The nit ioctl is still under flux because of
-		 * change of mailbox definition, in HPE. No applications yet
-		 * use this interface and let's not have applications use this
-		 * interface till the new specifitions are in place.
-		 */
-		return -EINVAL;
-#if 0
-		if( copy_from_user(uioc, arg, sizeof(nitioctl_t)) )
-			return (-EFAULT);
-		return 0;
-#endif
-	}
-
-	/*
-	 * Else assume we have mimd uioctl_t as arg. Convert to nitioctl_t
-	 *
-	 * Get the user ioctl structure
-	 */
-	if( copy_from_user(&uioc_mimd, arg, sizeof(struct uioctl_t)) )
-		return (-EFAULT);
-
-
-	/*
-	 * Get the opcode and subopcode for the commands
-	 */
-	opcode = uioc_mimd.ui.fcs.opcode;
-	subopcode = uioc_mimd.ui.fcs.subopcode;
-
-	switch (opcode) {
-	case 0x82:
-
-		switch (subopcode) {
-
-		case MEGAIOC_QDRVRVER:	/* Query driver version */
-			uioc->opcode = GET_DRIVER_VER;
-			uioc->uioc_uaddr = uioc_mimd.data;
-			break;
-
-		case MEGAIOC_QNADAP:	/* Get # of adapters */
-			uioc->opcode = GET_N_ADAP;
-			uioc->uioc_uaddr = uioc_mimd.data;
-			break;
-
-		case MEGAIOC_QADAPINFO:	/* Get adapter information */
-			uioc->opcode = GET_ADAP_INFO;
-			uioc->adapno = uioc_mimd.ui.fcs.adapno;
-			uioc->uioc_uaddr = uioc_mimd.data;
-			break;
-
-		default:
-			return(-EINVAL);
-		}
-
-		break;
-
-
-	case 0x81:
-
-		uioc->opcode = MBOX_CMD;
-		uioc->adapno = uioc_mimd.ui.fcs.adapno;
-
-		memcpy(uioc->uioc_rmbox, uioc_mimd.mbox, 18);
-
-		uioc->xferlen = uioc_mimd.ui.fcs.length;
-
-		if( uioc_mimd.outlen ) uioc->flags = UIOC_RD;
-		if( uioc_mimd.inlen ) uioc->flags |= UIOC_WR;
-
-		break;
-
-	case 0x80:
-
-		uioc->opcode = MBOX_CMD;
-		uioc->adapno = uioc_mimd.ui.fcs.adapno;
-
-		memcpy(uioc->uioc_rmbox, uioc_mimd.mbox, 18);
-
-		/*
-		 * Choose the xferlen bigger of input and output data
-		 */
-		uioc->xferlen = uioc_mimd.outlen > uioc_mimd.inlen ?
-			uioc_mimd.outlen : uioc_mimd.inlen;
-
-		if( uioc_mimd.outlen ) uioc->flags = UIOC_RD;
-		if( uioc_mimd.inlen ) uioc->flags |= UIOC_WR;
-
-		break;
-
-	default:
-		return (-EINVAL);
-
-	}
-
-	return 0;
-}
-
-/*
- * mega_n_to_m()
- * @arg - user address
- * @mc - mailbox command
- *
- * Updates the status information to the application, depending on application
- * conforms to older mimd ioctl interface or newer NIT ioctl interface
- */
-static int
-mega_n_to_m(void __user *arg, megacmd_t *mc)
-{
-	nitioctl_t	__user *uiocp;
-	megacmd_t	__user *umc;
-	mega_passthru	__user *upthru;
-	struct uioctl_t	__user *uioc_mimd;
-	char	signature[8] = {0};
-
-	/*
-	 * check is the application conforms to NIT.
-	 */
-	if( copy_from_user(signature, arg, 7) )
-		return -EFAULT;
-
-	if( memcmp(signature, "MEGANIT", 7) == 0 ) {
-
-		uiocp = arg;
-
-		if( put_user(mc->status, (u8 __user *)&MBOX_P(uiocp)->status) )
-			return (-EFAULT);
-
-		if( mc->cmd == MEGA_MBOXCMD_PASSTHRU ) {
-
-			umc = MBOX_P(uiocp);
-
-			if (get_user(upthru, (mega_passthru __user * __user *)&umc->xferaddr))
-				return -EFAULT;
-
-			if( put_user(mc->status, (u8 __user *)&upthru->scsistatus))
-				return (-EFAULT);
-		}
-	}
-	else {
-		uioc_mimd = arg;
-
-		if( put_user(mc->status, (u8 __user *)&uioc_mimd->mbox[17]) )
-			return (-EFAULT);
-
-		if( mc->cmd == MEGA_MBOXCMD_PASSTHRU ) {
-
-			umc = (megacmd_t __user *)uioc_mimd->mbox;
-
-			if (get_user(upthru, (mega_passthru __user * __user *)&umc->xferaddr))
-				return (-EFAULT);
-
-			if( put_user(mc->status, (u8 __user *)&upthru->scsistatus) )
-				return (-EFAULT);
-		}
-	}
-
-	return 0;
-}
-
-
-/*
- * MEGARAID 'FW' commands.
- */
-
-/**
- * mega_is_bios_enabled()
- * @adapter - pointer to our soft state
- *
- * issue command to find out if the BIOS is enabled for this controller
- */
-static int
-mega_is_bios_enabled(adapter_t *adapter)
-{
-	unsigned char	raw_mbox[sizeof(struct mbox_out)];
-	mbox_t	*mbox;
-	int	ret;
-
-	mbox = (mbox_t *)raw_mbox;
-
-	memset(&mbox->m_out, 0, sizeof(raw_mbox));
-
-	memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE);
-
-	mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle;
-
-	raw_mbox[0] = IS_BIOS_ENABLED;
-	raw_mbox[2] = GET_BIOS;
-
-
-	ret = issue_scb_block(adapter, raw_mbox);
-
-	return *(char *)adapter->mega_buffer;
-}
-
-
-/**
- * mega_enum_raid_scsi()
- * @adapter - pointer to our soft state
- *
- * Find out what channels are RAID/SCSI. This information is used to
- * differentiate the virtual channels and physical channels and to support
- * ROMB feature and non-disk devices.
- */
-static void
-mega_enum_raid_scsi(adapter_t *adapter)
-{
-	unsigned char raw_mbox[sizeof(struct mbox_out)];
-	mbox_t *mbox;
-	int i;
-
-	mbox = (mbox_t *)raw_mbox;
-
-	memset(&mbox->m_out, 0, sizeof(raw_mbox));
-
-	/*
-	 * issue command to find out what channels are raid/scsi
-	 */
-	raw_mbox[0] = CHNL_CLASS;
-	raw_mbox[2] = GET_CHNL_CLASS;
-
-	memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE);
-
-	mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle;
-
-	/*
-	 * Non-ROMB firmware fail this command, so all channels
-	 * must be shown RAID
-	 */
-	adapter->mega_ch_class = 0xFF;
-
-	if(!issue_scb_block(adapter, raw_mbox)) {
-		adapter->mega_ch_class = *((char *)adapter->mega_buffer);
-
-	}
-
-	for( i = 0; i < adapter->product_info.nchannels; i++ ) { 
-		if( (adapter->mega_ch_class >> i) & 0x01 ) {
-			dev_info(&adapter->dev->dev, "channel[%d] is raid\n",
-					i);
-		}
-		else {
-			dev_info(&adapter->dev->dev, "channel[%d] is scsi\n",
-					i);
-		}
-	}
-
-	return;
-}
-
-
-/**
- * mega_get_boot_drv()
- * @adapter - pointer to our soft state
- *
- * Find out which device is the boot device. Note, any logical drive or any
- * phyical device (e.g., a CDROM) can be designated as a boot device.
- */
-static void
-mega_get_boot_drv(adapter_t *adapter)
-{
-	struct private_bios_data	*prv_bios_data;
-	unsigned char	raw_mbox[sizeof(struct mbox_out)];
-	mbox_t	*mbox;
-	u16	cksum = 0;
-	u8	*cksum_p;
-	u8	boot_pdrv;
-	int	i;
-
-	mbox = (mbox_t *)raw_mbox;
-
-	memset(&mbox->m_out, 0, sizeof(raw_mbox));
-
-	raw_mbox[0] = BIOS_PVT_DATA;
-	raw_mbox[2] = GET_BIOS_PVT_DATA;
-
-	memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE);
-
-	mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle;
-
-	adapter->boot_ldrv_enabled = 0;
-	adapter->boot_ldrv = 0;
-
-	adapter->boot_pdrv_enabled = 0;
-	adapter->boot_pdrv_ch = 0;
-	adapter->boot_pdrv_tgt = 0;
-
-	if(issue_scb_block(adapter, raw_mbox) == 0) {
-		prv_bios_data =
-			(struct private_bios_data *)adapter->mega_buffer;
-
-		cksum = 0;
-		cksum_p = (char *)prv_bios_data;
-		for (i = 0; i < 14; i++ ) {
-			cksum += (u16)(*cksum_p++);
-		}
-
-		if (prv_bios_data->cksum == (u16)(0-cksum) ) {
-
-			/*
-			 * If MSB is set, a physical drive is set as boot
-			 * device
-			 */
-			if( prv_bios_data->boot_drv & 0x80 ) {
-				adapter->boot_pdrv_enabled = 1;
-				boot_pdrv = prv_bios_data->boot_drv & 0x7F;
-				adapter->boot_pdrv_ch = boot_pdrv / 16;
-				adapter->boot_pdrv_tgt = boot_pdrv % 16;
-			}
-			else {
-				adapter->boot_ldrv_enabled = 1;
-				adapter->boot_ldrv = prv_bios_data->boot_drv;
-			}
-		}
-	}
-
-}
-
-/**
- * mega_support_random_del()
- * @adapter - pointer to our soft state
- *
- * Find out if this controller supports random deletion and addition of
- * logical drives
- */
-static int
-mega_support_random_del(adapter_t *adapter)
-{
-	unsigned char raw_mbox[sizeof(struct mbox_out)];
-	mbox_t *mbox;
-	int rval;
-
-	mbox = (mbox_t *)raw_mbox;
-
-	memset(&mbox->m_out, 0, sizeof(raw_mbox));
-
-	/*
-	 * issue command
-	 */
-	raw_mbox[0] = FC_DEL_LOGDRV;
-	raw_mbox[2] = OP_SUP_DEL_LOGDRV;
-
-	rval = issue_scb_block(adapter, raw_mbox);
-
-	return !rval;
-}
-
-
-/**
- * mega_support_ext_cdb()
- * @adapter - pointer to our soft state
- *
- * Find out if this firmware support cdblen > 10
- */
-static int
-mega_support_ext_cdb(adapter_t *adapter)
-{
-	unsigned char raw_mbox[sizeof(struct mbox_out)];
-	mbox_t *mbox;
-	int rval;
-
-	mbox = (mbox_t *)raw_mbox;
-
-	memset(&mbox->m_out, 0, sizeof(raw_mbox));
-	/*
-	 * issue command to find out if controller supports extended CDBs.
-	 */
-	raw_mbox[0] = 0xA4;
-	raw_mbox[2] = 0x16;
-
-	rval = issue_scb_block(adapter, raw_mbox);
-
-	return !rval;
-}
-
-
-/**
- * mega_del_logdrv()
- * @adapter - pointer to our soft state
- * @logdrv - logical drive to be deleted
- *
- * Delete the specified logical drive. It is the responsibility of the user
- * app to let the OS know about this operation.
- */
-static int
-mega_del_logdrv(adapter_t *adapter, int logdrv)
-{
-	unsigned long flags;
-	scb_t *scb;
-	int rval;
-
-	/*
-	 * Stop sending commands to the controller, queue them internally.
-	 * When deletion is complete, ISR will flush the queue.
-	 */
-	atomic_set(&adapter->quiescent, 1);
-
-	/*
-	 * Wait till all the issued commands are complete and there are no
-	 * commands in the pending queue
-	 */
-	while (atomic_read(&adapter->pend_cmds) > 0 ||
-	       !list_empty(&adapter->pending_list))
-		msleep(1000);	/* sleep for 1s */
-
-	rval = mega_do_del_logdrv(adapter, logdrv);
-
-	spin_lock_irqsave(&adapter->lock, flags);
-
-	/*
-	 * If delete operation was successful, add 0x80 to the logical drive
-	 * ids for commands in the pending queue.
-	 */
-	if (adapter->read_ldidmap) {
-		struct list_head *pos;
-		list_for_each(pos, &adapter->pending_list) {
-			scb = list_entry(pos, scb_t, list);
-			if (scb->pthru->logdrv < 0x80 )
-				scb->pthru->logdrv += 0x80;
-		}
-	}
-
-	atomic_set(&adapter->quiescent, 0);
-
-	mega_runpendq(adapter);
-
-	spin_unlock_irqrestore(&adapter->lock, flags);
-
-	return rval;
-}
-
-
-static int
-mega_do_del_logdrv(adapter_t *adapter, int logdrv)
-{
-	megacmd_t	mc;
-	int	rval;
-
-	memset( &mc, 0, sizeof(megacmd_t));
-
-	mc.cmd = FC_DEL_LOGDRV;
-	mc.opcode = OP_DEL_LOGDRV;
-	mc.subopcode = logdrv;
-
-	rval = mega_internal_command(adapter, &mc, NULL);
-
-	/* log this event */
-	if(rval) {
-		dev_warn(&adapter->dev->dev, "Delete LD-%d failed", logdrv);
-		return rval;
-	}
-
-	/*
-	 * After deleting first logical drive, the logical drives must be
-	 * addressed by adding 0x80 to the logical drive id.
-	 */
-	adapter->read_ldidmap = 1;
-
-	return rval;
-}
-
-
-/**
- * mega_get_max_sgl()
- * @adapter - pointer to our soft state
- *
- * Find out the maximum number of scatter-gather elements supported by this
- * version of the firmware
- */
-static void
-mega_get_max_sgl(adapter_t *adapter)
-{
-	unsigned char	raw_mbox[sizeof(struct mbox_out)];
-	mbox_t	*mbox;
-
-	mbox = (mbox_t *)raw_mbox;
-
-	memset(mbox, 0, sizeof(raw_mbox));
-
-	memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE);
-
-	mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle;
-
-	raw_mbox[0] = MAIN_MISC_OPCODE;
-	raw_mbox[2] = GET_MAX_SG_SUPPORT;
-
-
-	if( issue_scb_block(adapter, raw_mbox) ) {
-		/*
-		 * f/w does not support this command. Choose the default value
-		 */
-		adapter->sglen = MIN_SGLIST;
-	}
-	else {
-		adapter->sglen = *((char *)adapter->mega_buffer);
-		
-		/*
-		 * Make sure this is not more than the resources we are
-		 * planning to allocate
-		 */
-		if ( adapter->sglen > MAX_SGLIST )
-			adapter->sglen = MAX_SGLIST;
-	}
-
-	return;
-}
-
-
-/**
- * mega_support_cluster()
- * @adapter - pointer to our soft state
- *
- * Find out if this firmware support cluster calls.
- */
-static int
-mega_support_cluster(adapter_t *adapter)
-{
-	unsigned char	raw_mbox[sizeof(struct mbox_out)];
-	mbox_t	*mbox;
-
-	mbox = (mbox_t *)raw_mbox;
-
-	memset(mbox, 0, sizeof(raw_mbox));
-
-	memset((void *)adapter->mega_buffer, 0, MEGA_BUFFER_SIZE);
-
-	mbox->m_out.xferaddr = (u32)adapter->buf_dma_handle;
-
-	/*
-	 * Try to get the initiator id. This command will succeed iff the
-	 * clustering is available on this HBA.
-	 */
-	raw_mbox[0] = MEGA_GET_TARGET_ID;
-
-	if( issue_scb_block(adapter, raw_mbox) == 0 ) {
-
-		/*
-		 * Cluster support available. Get the initiator target id.
-		 * Tell our id to mid-layer too.
-		 */
-		adapter->this_id = *(u32 *)adapter->mega_buffer;
-		adapter->host->this_id = adapter->this_id;
-
-		return 1;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PROC_FS
-/**
- * mega_adapinq()
- * @adapter - pointer to our soft state
- * @dma_handle - DMA address of the buffer
- *
- * Issue internal commands while interrupts are available.
- * We only issue direct mailbox commands from within the driver. ioctl()
- * interface using these routines can issue passthru commands.
- */
-static int
-mega_adapinq(adapter_t *adapter, dma_addr_t dma_handle)
-{
-	megacmd_t	mc;
-
-	memset(&mc, 0, sizeof(megacmd_t));
-
-	if( adapter->flag & BOARD_40LD ) {
-		mc.cmd = FC_NEW_CONFIG;
-		mc.opcode = NC_SUBOP_ENQUIRY3;
-		mc.subopcode = ENQ3_GET_SOLICITED_FULL;
-	}
-	else {
-		mc.cmd = MEGA_MBOXCMD_ADPEXTINQ;
-	}
-
-	mc.xferaddr = (u32)dma_handle;
-
-	if ( mega_internal_command(adapter, &mc, NULL) != 0 ) {
-		return -1;
-	}
-
-	return 0;
-}
-
-
-/** mega_internal_dev_inquiry()
- * @adapter - pointer to our soft state
- * @ch - channel for this device
- * @tgt - ID of this device
- * @buf_dma_handle - DMA address of the buffer
- *
- * Issue the scsi inquiry for the specified device.
- */
-static int
-mega_internal_dev_inquiry(adapter_t *adapter, u8 ch, u8 tgt,
-		dma_addr_t buf_dma_handle)
-{
-	mega_passthru	*pthru;
-	dma_addr_t	pthru_dma_handle;
-	megacmd_t	mc;
-	int		rval;
-	struct pci_dev	*pdev;
-
-
-	/*
-	 * For all internal commands, the buffer must be allocated in <4GB
-	 * address range
-	 */
-	if( make_local_pdev(adapter, &pdev) != 0 ) return -1;
-
-	pthru = pci_alloc_consistent(pdev, sizeof(mega_passthru),
-			&pthru_dma_handle);
-
-	if( pthru == NULL ) {
-		free_local_pdev(pdev);
-		return -1;
-	}
-
-	pthru->timeout = 2;
-	pthru->ars = 1;
-	pthru->reqsenselen = 14;
-	pthru->islogical = 0;
-
-	pthru->channel = (adapter->flag & BOARD_40LD) ? 0 : ch;
-
-	pthru->target = (adapter->flag & BOARD_40LD) ? (ch << 4)|tgt : tgt;
-
-	pthru->cdblen = 6;
-
-	pthru->cdb[0] = INQUIRY;
-	pthru->cdb[1] = 0;
-	pthru->cdb[2] = 0;
-	pthru->cdb[3] = 0;
-	pthru->cdb[4] = 255;
-	pthru->cdb[5] = 0;
-
-
-	pthru->dataxferaddr = (u32)buf_dma_handle;
-	pthru->dataxferlen = 256;
-
-	memset(&mc, 0, sizeof(megacmd_t));
-
-	mc.cmd = MEGA_MBOXCMD_PASSTHRU;
-	mc.xferaddr = (u32)pthru_dma_handle;
-
-	rval = mega_internal_command(adapter, &mc, pthru);
-
-	pci_free_consistent(pdev, sizeof(mega_passthru), pthru,
-			pthru_dma_handle);
-
-	free_local_pdev(pdev);
-
-	return rval;
-}
-#endif
-
-/**
- * mega_internal_command()
- * @adapter - pointer to our soft state
- * @mc - the mailbox command
- * @pthru - Passthru structure for DCDB commands
- *
- * Issue the internal commands in interrupt mode.
- * The last argument is the address of the passthru structure if the command
- * to be fired is a passthru command
- *
- * Note: parameter 'pthru' is null for non-passthru commands.
- */
-static int
-mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru)
-{
-	unsigned long flags;
-	scb_t	*scb;
-	int	rval;
-
-	/*
-	 * The internal commands share one command id and hence are
-	 * serialized. This is so because we want to reserve maximum number of
-	 * available command ids for the I/O commands.
-	 */
-	mutex_lock(&adapter->int_mtx);
-
-	scb = &adapter->int_scb;
-	memset(scb, 0, sizeof(scb_t));
-
-	scb->idx = CMDID_INT_CMDS;
-	scb->state |= SCB_ACTIVE | SCB_PENDQ;
-
-	memcpy(scb->raw_mbox, mc, sizeof(megacmd_t));
-
-	/*
-	 * Is it a passthru command
-	 */
-	if (mc->cmd == MEGA_MBOXCMD_PASSTHRU)
-		scb->pthru = pthru;
-
-	spin_lock_irqsave(&adapter->lock, flags);
-	list_add_tail(&scb->list, &adapter->pending_list);
-	/*
-	 * Check if the HBA is in quiescent state, e.g., during a
-	 * delete logical drive opertion. If it is, don't run
-	 * the pending_list.
-	 */
-	if (atomic_read(&adapter->quiescent) == 0)
-		mega_runpendq(adapter);
-	spin_unlock_irqrestore(&adapter->lock, flags);
-
-	wait_for_completion(&adapter->int_waitq);
-
-	mc->status = rval = adapter->int_status;
-
-	/*
-	 * Print a debug message for all failed commands. Applications can use
-	 * this information.
-	 */
-	if (rval && trace_level) {
-		dev_info(&adapter->dev->dev, "cmd [%x, %x, %x] status:[%x]\n",
-			mc->cmd, mc->opcode, mc->subopcode, rval);
-	}
-
-	mutex_unlock(&adapter->int_mtx);
-	return rval;
-}
-
-static struct scsi_host_template megaraid_template = {
-	.module				= THIS_MODULE,
-	.name				= "MegaRAID",
-	.proc_name			= "megaraid_legacy",
-	.info				= megaraid_info,
-	.queuecommand			= megaraid_queue,	
-	.bios_param			= megaraid_biosparam,
-	.max_sectors			= MAX_SECTORS_PER_IO,
-	.can_queue			= MAX_COMMANDS,
-	.this_id			= DEFAULT_INITIATOR_ID,
-	.sg_tablesize			= MAX_SGLIST,
-	.cmd_per_lun			= DEF_CMD_PER_LUN,
-	.use_clustering			= ENABLE_CLUSTERING,
-	.eh_abort_handler		= megaraid_abort,
-	.eh_device_reset_handler	= megaraid_reset,
-	.eh_bus_reset_handler		= megaraid_reset,
-	.eh_host_reset_handler		= megaraid_reset,
-	.no_write_same			= 1,
-};
-
-static int
-megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
-{
-	struct Scsi_Host *host;
-	adapter_t *adapter;
-	unsigned long mega_baseport, tbase, flag = 0;
-	u16 subsysid, subsysvid;
-	u8 pci_bus, pci_dev_func;
-	int irq, i, j;
-	int error = -ENODEV;
-
-	if (pci_enable_device(pdev))
-		goto out;
-	pci_set_master(pdev);
-
-	pci_bus = pdev->bus->number;
-	pci_dev_func = pdev->devfn;
-
-	/*
-	 * The megaraid3 stuff reports the ID of the Intel part which is not
-	 * remotely specific to the megaraid
-	 */
-	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
-		u16 magic;
-		/*
-		 * Don't fall over the Compaq management cards using the same
-		 * PCI identifier
-		 */
-		if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ &&
-		    pdev->subsystem_device == 0xC000)
-		   	return -ENODEV;
-		/* Now check the magic signature byte */
-		pci_read_config_word(pdev, PCI_CONF_AMISIG, &magic);
-		if (magic != HBA_SIGNATURE_471 && magic != HBA_SIGNATURE)
-			return -ENODEV;
-		/* Ok it is probably a megaraid */
-	}
-
-	/*
-	 * For these vendor and device ids, signature offsets are not
-	 * valid and 64 bit is implicit
-	 */
-	if (id->driver_data & BOARD_64BIT)
-		flag |= BOARD_64BIT;
-	else {
-		u32 magic64;
-
-		pci_read_config_dword(pdev, PCI_CONF_AMISIG64, &magic64);
-		if (magic64 == HBA_SIGNATURE_64BIT)
-			flag |= BOARD_64BIT;
-	}
-
-	subsysvid = pdev->subsystem_vendor;
-	subsysid = pdev->subsystem_device;
-
-	dev_notice(&pdev->dev, "found 0x%4.04x:0x%4.04x\n",
-		id->vendor, id->device);
-
-	/* Read the base port and IRQ from PCI */
-	mega_baseport = pci_resource_start(pdev, 0);
-	irq = pdev->irq;
-
-	tbase = mega_baseport;
-	if (pci_resource_flags(pdev, 0) & IORESOURCE_MEM) {
-		flag |= BOARD_MEMMAP;
-
-		if (!request_mem_region(mega_baseport, 128, "megaraid")) {
-			dev_warn(&pdev->dev, "mem region busy!\n");
-			goto out_disable_device;
-		}
-
-		mega_baseport = (unsigned long)ioremap(mega_baseport, 128);
-		if (!mega_baseport) {
-			dev_warn(&pdev->dev, "could not map hba memory\n");
-			goto out_release_region;
-		}
-	} else {
-		flag |= BOARD_IOMAP;
-		mega_baseport += 0x10;
-
-		if (!request_region(mega_baseport, 16, "megaraid"))
-			goto out_disable_device;
-	}
-
-	/* Initialize SCSI Host structure */
-	host = scsi_host_alloc(&megaraid_template, sizeof(adapter_t));
-	if (!host)
-		goto out_iounmap;
-
-	adapter = (adapter_t *)host->hostdata;
-	memset(adapter, 0, sizeof(adapter_t));
-
-	dev_notice(&pdev->dev,
-		"scsi%d:Found MegaRAID controller at 0x%lx, IRQ:%d\n",
-		host->host_no, mega_baseport, irq);
-
-	adapter->base = mega_baseport;
-	if (flag & BOARD_MEMMAP)
-		adapter->mmio_base = (void __iomem *) mega_baseport;
-
-	INIT_LIST_HEAD(&adapter->free_list);
-	INIT_LIST_HEAD(&adapter->pending_list);
-	INIT_LIST_HEAD(&adapter->completed_list);
-
-	adapter->flag = flag;
-	spin_lock_init(&adapter->lock);
-
-	host->cmd_per_lun = max_cmd_per_lun;
-	host->max_sectors = max_sectors_per_io;
-
-	adapter->dev = pdev;
-	adapter->host = host;
-
-	adapter->host->irq = irq;
-
-	if (flag & BOARD_MEMMAP)
-		adapter->host->base = tbase;
-	else {
-		adapter->host->io_port = tbase;
-		adapter->host->n_io_port = 16;
-	}
-
-	adapter->host->unique_id = (pci_bus << 8) | pci_dev_func;
-
-	/*
-	 * Allocate buffer to issue internal commands.
-	 */
-	adapter->mega_buffer = pci_alloc_consistent(adapter->dev,
-		MEGA_BUFFER_SIZE, &adapter->buf_dma_handle);
-	if (!adapter->mega_buffer) {
-		dev_warn(&pdev->dev, "out of RAM\n");
-		goto out_host_put;
-	}
-
-	adapter->scb_list = kmalloc(sizeof(scb_t) * MAX_COMMANDS, GFP_KERNEL);
-	if (!adapter->scb_list) {
-		dev_warn(&pdev->dev, "out of RAM\n");
-		goto out_free_cmd_buffer;
-	}
-
-	if (request_irq(irq, (adapter->flag & BOARD_MEMMAP) ?
-				megaraid_isr_memmapped : megaraid_isr_iomapped,
-					IRQF_SHARED, "megaraid", adapter)) {
-		dev_warn(&pdev->dev, "Couldn't register IRQ %d!\n", irq);
-		goto out_free_scb_list;
-	}
-
-	if (mega_setup_mailbox(adapter))
-		goto out_free_irq;
-
-	if (mega_query_adapter(adapter))
-		goto out_free_mbox;
-
-	/*
-	 * Have checks for some buggy f/w
-	 */
-	if ((subsysid == 0x1111) && (subsysvid == 0x1111)) {
-		/*
-		 * Which firmware
-		 */
-		if (!strcmp(adapter->fw_version, "3.00") ||
-				!strcmp(adapter->fw_version, "3.01")) {
-
-			dev_warn(&pdev->dev,
-				"Your card is a Dell PERC "
-				"2/SC RAID controller with "
-				"firmware\nmegaraid: 3.00 or 3.01.  "
-				"This driver is known to have "
-				"corruption issues\nmegaraid: with "
-				"those firmware versions on this "
-				"specific card.  In order\nmegaraid: "
-				"to protect your data, please upgrade "
-				"your firmware to version\nmegaraid: "
-				"3.10 or later, available from the "
-				"Dell Technical Support web\n"
-				"megaraid: site at\nhttp://support."
-				"dell.com/us/en/filelib/download/"
-				"index.asp?fileid=2940\n"
-			);
-		}
-	}
-
-	/*
-	 * If we have a HP 1M(0x60E7)/2M(0x60E8) controller with
-	 * firmware H.01.07, H.01.08, and H.01.09 disable 64 bit
-	 * support, since this firmware cannot handle 64 bit
-	 * addressing
-	 */
-	if ((subsysvid == PCI_VENDOR_ID_HP) &&
-	    ((subsysid == 0x60E7) || (subsysid == 0x60E8))) {
-		/*
-		 * which firmware
-		 */
-		if (!strcmp(adapter->fw_version, "H01.07") ||
-		    !strcmp(adapter->fw_version, "H01.08") ||
-		    !strcmp(adapter->fw_version, "H01.09") ) {
-			dev_warn(&pdev->dev,
-				"Firmware H.01.07, "
-				"H.01.08, and H.01.09 on 1M/2M "
-				"controllers\n"
-				"do not support 64 bit "
-				"addressing.\nDISABLING "
-				"64 bit support.\n");
-			adapter->flag &= ~BOARD_64BIT;
-		}
-	}
-
-	if (mega_is_bios_enabled(adapter))
-		mega_hbas[hba_count].is_bios_enabled = 1;
-	mega_hbas[hba_count].hostdata_addr = adapter;
-
-	/*
-	 * Find out which channel is raid and which is scsi. This is
-	 * for ROMB support.
-	 */
-	mega_enum_raid_scsi(adapter);
-
-	/*
-	 * Find out if a logical drive is set as the boot drive. If
-	 * there is one, will make that as the first logical drive.
-	 * ROMB: Do we have to boot from a physical drive. Then all
-	 * the physical drives would appear before the logical disks.
-	 * Else, all the physical drives would be exported to the mid
-	 * layer after logical drives.
-	 */
-	mega_get_boot_drv(adapter);
-
-	if (adapter->boot_pdrv_enabled) {
-		j = adapter->product_info.nchannels;
-		for( i = 0; i < j; i++ )
-			adapter->logdrv_chan[i] = 0;
-		for( i = j; i < NVIRT_CHAN + j; i++ )
-			adapter->logdrv_chan[i] = 1;
-	} else {
-		for (i = 0; i < NVIRT_CHAN; i++)
-			adapter->logdrv_chan[i] = 1;
-		for (i = NVIRT_CHAN; i < MAX_CHANNELS+NVIRT_CHAN; i++)
-			adapter->logdrv_chan[i] = 0;
-		adapter->mega_ch_class <<= NVIRT_CHAN;
-	}
-
-	/*
-	 * Do we support random deletion and addition of logical
-	 * drives
-	 */
-	adapter->read_ldidmap = 0;	/* set it after first logdrv
-						   delete cmd */
-	adapter->support_random_del = mega_support_random_del(adapter);
-
-	/* Initialize SCBs */
-	if (mega_init_scb(adapter))
-		goto out_free_mbox;
-
-	/*
-	 * Reset the pending commands counter
-	 */
-	atomic_set(&adapter->pend_cmds, 0);
-
-	/*
-	 * Reset the adapter quiescent flag
-	 */
-	atomic_set(&adapter->quiescent, 0);
-
-	hba_soft_state[hba_count] = adapter;
-
-	/*
-	 * Fill in the structure which needs to be passed back to the
-	 * application when it does an ioctl() for controller related
-	 * information.
-	 */
-	i = hba_count;
-
-	mcontroller[i].base = mega_baseport;
-	mcontroller[i].irq = irq;
-	mcontroller[i].numldrv = adapter->numldrv;
-	mcontroller[i].pcibus = pci_bus;
-	mcontroller[i].pcidev = id->device;
-	mcontroller[i].pcifun = PCI_FUNC (pci_dev_func);
-	mcontroller[i].pciid = -1;
-	mcontroller[i].pcivendor = id->vendor;
-	mcontroller[i].pcislot = PCI_SLOT(pci_dev_func);
-	mcontroller[i].uid = (pci_bus << 8) | pci_dev_func;
-
-
-	/* Set the Mode of addressing to 64 bit if we can */
-	if ((adapter->flag & BOARD_64BIT) && (sizeof(dma_addr_t) == 8)) {
-		pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
-		adapter->has_64bit_addr = 1;
-	} else  {
-		pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-		adapter->has_64bit_addr = 0;
-	}
-		
-	mutex_init(&adapter->int_mtx);
-	init_completion(&adapter->int_waitq);
-
-	adapter->this_id = DEFAULT_INITIATOR_ID;
-	adapter->host->this_id = DEFAULT_INITIATOR_ID;
-
-#if MEGA_HAVE_CLUSTERING
-	/*
-	 * Is cluster support enabled on this controller
-	 * Note: In a cluster the HBAs ( the initiators ) will have
-	 * different target IDs and we cannot assume it to be 7. Call
-	 * to mega_support_cluster() will get the target ids also if
-	 * the cluster support is available
-	 */
-	adapter->has_cluster = mega_support_cluster(adapter);
-	if (adapter->has_cluster) {
-		dev_notice(&pdev->dev,
-			"Cluster driver, initiator id:%d\n",
-			adapter->this_id);
-	}
-#endif
-
-	pci_set_drvdata(pdev, host);
-
-	mega_create_proc_entry(hba_count, mega_proc_dir_entry);
-
-	error = scsi_add_host(host, &pdev->dev);
-	if (error)
-		goto out_free_mbox;
-
-	scsi_scan_host(host);
-	hba_count++;
-	return 0;
-
- out_free_mbox:
-	pci_free_consistent(adapter->dev, sizeof(mbox64_t),
-			adapter->una_mbox64, adapter->una_mbox64_dma);
- out_free_irq:
-	free_irq(adapter->host->irq, adapter);
- out_free_scb_list:
-	kfree(adapter->scb_list);
- out_free_cmd_buffer:
-	pci_free_consistent(adapter->dev, MEGA_BUFFER_SIZE,
-			adapter->mega_buffer, adapter->buf_dma_handle);
- out_host_put:
-	scsi_host_put(host);
- out_iounmap:
-	if (flag & BOARD_MEMMAP)
-		iounmap((void *)mega_baseport);
- out_release_region:
-	if (flag & BOARD_MEMMAP)
-		release_mem_region(tbase, 128);
-	else
-		release_region(mega_baseport, 16);
- out_disable_device:
-	pci_disable_device(pdev);
- out:
-	return error;
-}
-
-static void
-__megaraid_shutdown(adapter_t *adapter)
-{
-	u_char	raw_mbox[sizeof(struct mbox_out)];
-	mbox_t	*mbox = (mbox_t *)raw_mbox;
-	int	i;
-
-	/* Flush adapter cache */
-	memset(&mbox->m_out, 0, sizeof(raw_mbox));
-	raw_mbox[0] = FLUSH_ADAPTER;
-
-	free_irq(adapter->host->irq, adapter);
-
-	/* Issue a blocking (interrupts disabled) command to the card */
-	issue_scb_block(adapter, raw_mbox);
-
-	/* Flush disks cache */
-	memset(&mbox->m_out, 0, sizeof(raw_mbox));
-	raw_mbox[0] = FLUSH_SYSTEM;
-
-	/* Issue a blocking (interrupts disabled) command to the card */
-	issue_scb_block(adapter, raw_mbox);
-	
-	if (atomic_read(&adapter->pend_cmds) > 0)
-		dev_warn(&adapter->dev->dev, "pending commands!!\n");
-
-	/*
-	 * Have a delibrate delay to make sure all the caches are
-	 * actually flushed.
-	 */
-	for (i = 0; i <= 10; i++)
-		mdelay(1000);
-}
-
-static void
-megaraid_remove_one(struct pci_dev *pdev)
-{
-	struct Scsi_Host *host = pci_get_drvdata(pdev);
-	adapter_t *adapter = (adapter_t *)host->hostdata;
-
-	scsi_remove_host(host);
-
-	__megaraid_shutdown(adapter);
-
-	/* Free our resources */
-	if (adapter->flag & BOARD_MEMMAP) {
-		iounmap((void *)adapter->base);
-		release_mem_region(adapter->host->base, 128);
-	} else
-		release_region(adapter->base, 16);
-
-	mega_free_sgl(adapter);
-
-#ifdef CONFIG_PROC_FS
-	if (adapter->controller_proc_dir_entry) {
-		remove_proc_entry("stat", adapter->controller_proc_dir_entry);
-		remove_proc_entry("config",
-				adapter->controller_proc_dir_entry);
-		remove_proc_entry("mailbox",
-				adapter->controller_proc_dir_entry);
-#if MEGA_HAVE_ENH_PROC
-		remove_proc_entry("rebuild-rate",
-				adapter->controller_proc_dir_entry);
-		remove_proc_entry("battery-status",
-				adapter->controller_proc_dir_entry);
-
-		remove_proc_entry("diskdrives-ch0",
-				adapter->controller_proc_dir_entry);
-		remove_proc_entry("diskdrives-ch1",
-				adapter->controller_proc_dir_entry);
-		remove_proc_entry("diskdrives-ch2",
-				adapter->controller_proc_dir_entry);
-		remove_proc_entry("diskdrives-ch3",
-				adapter->controller_proc_dir_entry);
-
-		remove_proc_entry("raiddrives-0-9",
-				adapter->controller_proc_dir_entry);
-		remove_proc_entry("raiddrives-10-19",
-				adapter->controller_proc_dir_entry);
-		remove_proc_entry("raiddrives-20-29",
-				adapter->controller_proc_dir_entry);
-		remove_proc_entry("raiddrives-30-39",
-				adapter->controller_proc_dir_entry);
-#endif
-		{
-			char	buf[12] = { 0 };
-			sprintf(buf, "hba%d", adapter->host->host_no);
-			remove_proc_entry(buf, mega_proc_dir_entry);
-		}
-	}
-#endif
-
-	pci_free_consistent(adapter->dev, MEGA_BUFFER_SIZE,
-			adapter->mega_buffer, adapter->buf_dma_handle);
-	kfree(adapter->scb_list);
-	pci_free_consistent(adapter->dev, sizeof(mbox64_t),
-			adapter->una_mbox64, adapter->una_mbox64_dma);
-
-	scsi_host_put(host);
-	pci_disable_device(pdev);
-
-	hba_count--;
-}
-
-static void
-megaraid_shutdown(struct pci_dev *pdev)
-{
-	struct Scsi_Host *host = pci_get_drvdata(pdev);
-	adapter_t *adapter = (adapter_t *)host->hostdata;
-
-	__megaraid_shutdown(adapter);
-}
-
-static struct pci_device_id megaraid_pci_tbl[] = {
-	{PCI_VENDOR_ID_AMI, PCI_DEVICE_ID_AMI_MEGARAID,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_AMI, PCI_DEVICE_ID_AMI_MEGARAID2,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_AMI_MEGARAID3,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{0,}
-};
-MODULE_DEVICE_TABLE(pci, megaraid_pci_tbl);
-
-static struct pci_driver megaraid_pci_driver = {
-	.name		= "megaraid_legacy",
-	.id_table	= megaraid_pci_tbl,
-	.probe		= megaraid_probe_one,
-	.remove		= megaraid_remove_one,
-	.shutdown	= megaraid_shutdown,
-};
-
-static int __init megaraid_init(void)
-{
-	int error;
-
-	if ((max_cmd_per_lun <= 0) || (max_cmd_per_lun > MAX_CMD_PER_LUN))
-		max_cmd_per_lun = MAX_CMD_PER_LUN;
-	if (max_mbox_busy_wait > MBOX_BUSY_WAIT)
-		max_mbox_busy_wait = MBOX_BUSY_WAIT;
-
-#ifdef CONFIG_PROC_FS
-	mega_proc_dir_entry = proc_mkdir("megaraid", NULL);
-	if (!mega_proc_dir_entry) {
-		printk(KERN_WARNING
-				"megaraid: failed to create megaraid root\n");
-	}
-#endif
-	error = pci_register_driver(&megaraid_pci_driver);
-	if (error) {
-#ifdef CONFIG_PROC_FS
-		remove_proc_entry("megaraid", NULL);
-#endif
-		return error;
-	}
-
-	/*
-	 * Register the driver as a character device, for applications
-	 * to access it for ioctls.
-	 * First argument (major) to register_chrdev implies a dynamic
-	 * major number allocation.
-	 */
-	major = register_chrdev(0, "megadev_legacy", &megadev_fops);
-	if (!major) {
-		printk(KERN_WARNING
-				"megaraid: failed to register char device\n");
-	}
-
-	return 0;
-}
-
-static void __exit megaraid_exit(void)
-{
-	/*
-	 * Unregister the character device interface to the driver.
-	 */
-	unregister_chrdev(major, "megadev_legacy");
-
-	pci_unregister_driver(&megaraid_pci_driver);
-
-#ifdef CONFIG_PROC_FS
-	remove_proc_entry("megaraid", NULL);
-#endif
-}
-
-module_init(megaraid_init);
-module_exit(megaraid_exit);
-
-/* vi: set ts=8 sw=8 tw=78: */
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
deleted file mode 100644
index 508d65e..0000000
--- a/drivers/scsi/megaraid.h
+++ /dev/null
@@ -1,1010 +0,0 @@ 
-#ifndef __MEGARAID_H__
-#define __MEGARAID_H__
-
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-
-#define MEGARAID_VERSION	\
-	"v2.00.4 (Release Date: Thu Feb 9 08:51:30 EST 2006)\n"
-
-/*
- * Driver features - change the values to enable or disable features in the
- * driver.
- */
-
-/*
- * Command coalescing - This feature allows the driver to be able to combine
- * two or more commands and issue as one command in order to boost I/O
- * performance. Useful if the nature of the I/O is sequential. It is not very
- * useful for random natured I/Os.
- */
-#define MEGA_HAVE_COALESCING	0
-
-/*
- * Clustering support - Set this flag if you are planning to use the
- * clustering services provided by the megaraid controllers and planning to
- * setup a cluster
- */
-#define MEGA_HAVE_CLUSTERING	1
-
-/*
- * Driver statistics - Set this flag if you are interested in statics about
- * number of I/O completed on each logical drive and how many interrupts
- * generated. If enabled, this information is available through /proc
- * interface and through the private ioctl. Setting this flag has a
- * performance penalty.
- */
-#define MEGA_HAVE_STATS		0
-
-/*
- * Enhanced /proc interface - This feature will allow you to have a more
- * detailed /proc interface for megaraid driver. E.g., a real time update of
- * the status of the logical drives, battery status, physical drives etc.
- */
-#define MEGA_HAVE_ENH_PROC	1
-
-#define MAX_DEV_TYPE	32
-
-#define PCI_DEVICE_ID_DISCOVERY		0x000E
-#define PCI_DEVICE_ID_PERC4_DI		0x000F
-#define PCI_DEVICE_ID_PERC4_QC_VERDE	0x0407
-
-#define HBA_SIGNATURE	      		0x3344
-#define HBA_SIGNATURE_471	  	0xCCCC
-#define HBA_SIGNATURE_64BIT		0x0299
-
-#define MBOX_BUSY_WAIT			10	/* wait for up to 10 usec for
-						   mailbox to be free */
-#define DEFAULT_INITIATOR_ID	7
-
-#define MAX_SGLIST		64	/* max supported in f/w */
-#define MIN_SGLIST		26	/* guaranteed to support these many */
-#define MAX_COMMANDS		126
-#define CMDID_INT_CMDS		MAX_COMMANDS+1	/* make sure CMDID_INT_CMDS
-					 	is less than max commands
-						supported by any f/w */
-
-#define MAX_CDB_LEN	     	10
-#define MAX_EXT_CDB_LEN		16	/* we support cdb length up to 16 */
-
-#define DEF_CMD_PER_LUN		63
-#define MAX_CMD_PER_LUN		MAX_COMMANDS
-#define MAX_FIRMWARE_STATUS	46
-#define MAX_XFER_PER_CMD	(64*1024)
-#define MAX_SECTORS_PER_IO	128
-
-#define MAX_LOGICAL_DRIVES_40LD		40
-#define FC_MAX_PHYSICAL_DEVICES		256
-#define MAX_LOGICAL_DRIVES_8LD		8
-#define MAX_CHANNELS			5
-#define MAX_TARGET			15
-#define MAX_PHYSICAL_DRIVES		MAX_CHANNELS*MAX_TARGET
-#define MAX_ROW_SIZE_40LD		32
-#define MAX_ROW_SIZE_8LD		8
-#define MAX_SPAN_DEPTH			8
-
-#define NVIRT_CHAN		4	/* # of virtual channels to represent
-					   up to 60 logical drives */
-struct mbox_out {
-	/* 0x0 */ u8 cmd;
-	/* 0x1 */ u8 cmdid;
-	/* 0x2 */ u16 numsectors;
-	/* 0x4 */ u32 lba;
-	/* 0x8 */ u32 xferaddr;
-	/* 0xC */ u8 logdrv;
-	/* 0xD */ u8 numsgelements;
-	/* 0xE */ u8 resvd;
-} __attribute__ ((packed));
-
-struct mbox_in {
-	/* 0xF */ volatile u8 busy;
-	/* 0x10 */ volatile u8 numstatus;
-	/* 0x11 */ volatile u8 status;
-	/* 0x12 */ volatile u8 completed[MAX_FIRMWARE_STATUS];
-	volatile u8 poll;
-	volatile u8 ack;
-} __attribute__ ((packed));
-
-typedef struct {
-	struct mbox_out	m_out;
-	struct mbox_in	m_in;
-} __attribute__ ((packed)) mbox_t;
-
-typedef struct {
-	u32 xfer_segment_lo;
-	u32 xfer_segment_hi;
-	mbox_t mbox;
-} __attribute__ ((packed)) mbox64_t;
-
-
-/*
- * Passthru definitions
- */
-#define MAX_REQ_SENSE_LEN       0x20
-
-typedef struct {
-	u8 timeout:3;		/* 0=6sec/1=60sec/2=10min/3=3hrs */
-	u8 ars:1;
-	u8 reserved:3;
-	u8 islogical:1;
-	u8 logdrv;		/* if islogical == 1 */
-	u8 channel;		/* if islogical == 0 */
-	u8 target;		/* if islogical == 0 */
-	u8 queuetag;		/* unused */
-	u8 queueaction;		/* unused */
-	u8 cdb[MAX_CDB_LEN];
-	u8 cdblen;
-	u8 reqsenselen;
-	u8 reqsensearea[MAX_REQ_SENSE_LEN];
-	u8 numsgelements;
-	u8 scsistatus;
-	u32 dataxferaddr;
-	u32 dataxferlen;
-} __attribute__ ((packed)) mega_passthru;
-
-
-/*
- * Extended passthru: support CDB > 10 bytes
- */
-typedef struct {
-	u8 timeout:3;		/* 0=6sec/1=60sec/2=10min/3=3hrs */
-	u8 ars:1;
-	u8 rsvd1:1;
-	u8 cd_rom:1;
-	u8 rsvd2:1;
-	u8 islogical:1;
-	u8 logdrv;		/* if islogical == 1 */
-	u8 channel;		/* if islogical == 0 */
-	u8 target;		/* if islogical == 0 */
-	u8 queuetag;		/* unused */
-	u8 queueaction;		/* unused */
-	u8 cdblen;
-	u8 rsvd3;
-	u8 cdb[MAX_EXT_CDB_LEN];
-	u8 numsgelements;
-	u8 status;
-	u8 reqsenselen;
-	u8 reqsensearea[MAX_REQ_SENSE_LEN];
-	u8 rsvd4;
-	u32 dataxferaddr;
-	u32 dataxferlen;
-} __attribute__ ((packed)) mega_ext_passthru;
-
-typedef struct {
-	u64 address;
-	u32 length;
-} __attribute__ ((packed)) mega_sgl64;
-
-typedef struct {
-	u32 address;
-	u32 length;
-} __attribute__ ((packed)) mega_sglist;
-
-
-/* Queued command data */
-typedef struct {
-	int	idx;
-	u32	state;
-	struct list_head	list;
-	u8	raw_mbox[66];
-	u32	dma_type;
-	u32	dma_direction;
-
-	Scsi_Cmnd	*cmd;
-	dma_addr_t	dma_h_bulkdata;
-	dma_addr_t	dma_h_sgdata;
-
-	mega_sglist	*sgl;
-	mega_sgl64	*sgl64;
-	dma_addr_t	sgl_dma_addr;
-
-	mega_passthru		*pthru;
-	dma_addr_t		pthru_dma_addr;
-	mega_ext_passthru	*epthru;
-	dma_addr_t		epthru_dma_addr;
-} scb_t;
-
-/*
- * Flags to follow the scb as it transitions between various stages
- */
-#define SCB_FREE	0x0000	/* on the free list */
-#define SCB_ACTIVE	0x0001	/* off the free list */
-#define SCB_PENDQ	0x0002	/* on the pending queue */
-#define SCB_ISSUED	0x0004	/* issued - owner f/w */
-#define SCB_ABORT	0x0008	/* Got an abort for this one */
-#define SCB_RESET	0x0010	/* Got a reset for this one */
-
-/*
- * Utilities declare this strcture size as 1024 bytes. So more fields can
- * be added in future.
- */
-typedef struct {
-	u32	data_size; /* current size in bytes (not including resvd) */
-
-	u32	config_signature;
-		/* Current value is 0x00282008
-		 * 0x28=MAX_LOGICAL_DRIVES,
-		 * 0x20=Number of stripes and
-		 * 0x08=Number of spans */
-
-	u8	fw_version[16];		/* printable ASCI string */
-	u8	bios_version[16];	/* printable ASCI string */
-	u8	product_name[80];	/* printable ASCI string */
-
-	u8	max_commands;		/* Max. concurrent commands supported */
-	u8	nchannels;		/* Number of SCSI Channels detected */
-	u8	fc_loop_present;	/* Number of Fibre Loops detected */
-	u8	mem_type;		/* EDO, FPM, SDRAM etc */
-
-	u32	signature;
-	u16	dram_size;		/* In terms of MB */
-	u16	subsysid;
-
-	u16	subsysvid;
-	u8	notify_counters;
-	u8	pad1k[889];		/* 135 + 889 resvd = 1024 total size */
-} __attribute__ ((packed)) mega_product_info;
-
-struct notify {
-	u32 global_counter;	/* Any change increments this counter */
-
-	u8 param_counter;	/* Indicates any params changed  */
-	u8 param_id;		/* Param modified - defined below */
-	u16 param_val;		/* New val of last param modified */
-
-	u8 write_config_counter;	/* write config occurred */
-	u8 write_config_rsvd[3];
-
-	u8 ldrv_op_counter;	/* Indicates ldrv op started/completed */
-	u8 ldrv_opid;		/* ldrv num */
-	u8 ldrv_opcmd;		/* ldrv operation - defined below */
-	u8 ldrv_opstatus;	/* status of the operation */
-
-	u8 ldrv_state_counter;	/* Indicates change of ldrv state */
-	u8 ldrv_state_id;		/* ldrv num */
-	u8 ldrv_state_new;	/* New state */
-	u8 ldrv_state_old;	/* old state */
-
-	u8 pdrv_state_counter;	/* Indicates change of ldrv state */
-	u8 pdrv_state_id;		/* pdrv id */
-	u8 pdrv_state_new;	/* New state */
-	u8 pdrv_state_old;	/* old state */
-
-	u8 pdrv_fmt_counter;	/* Indicates pdrv format started/over */
-	u8 pdrv_fmt_id;		/* pdrv id */
-	u8 pdrv_fmt_val;		/* format started/over */
-	u8 pdrv_fmt_rsvd;
-
-	u8 targ_xfer_counter;	/* Indicates SCSI-2 Xfer rate change */
-	u8 targ_xfer_id;	/* pdrv Id  */
-	u8 targ_xfer_val;		/* new Xfer params of last pdrv */
-	u8 targ_xfer_rsvd;
-
-	u8 fcloop_id_chg_counter;	/* Indicates loopid changed */
-	u8 fcloopid_pdrvid;		/* pdrv id */
-	u8 fcloop_id0;			/* loopid on fc loop 0 */
-	u8 fcloop_id1;			/* loopid on fc loop 1 */
-
-	u8 fcloop_state_counter;	/* Indicates loop state changed */
-	u8 fcloop_state0;		/* state of fc loop 0 */
-	u8 fcloop_state1;		/* state of fc loop 1 */
-	u8 fcloop_state_rsvd;
-} __attribute__ ((packed));
-
-#define MAX_NOTIFY_SIZE     0x80
-#define CUR_NOTIFY_SIZE     sizeof(struct notify)
-
-typedef struct {
-	u32	data_size; /* current size in bytes (not including resvd) */
-
-	struct notify notify;
-
-	u8	notify_rsvd[MAX_NOTIFY_SIZE - CUR_NOTIFY_SIZE];
-
-	u8	rebuild_rate;		/* Rebuild rate (0% - 100%) */
-	u8	cache_flush_interval;	/* In terms of Seconds */
-	u8	sense_alert;
-	u8	drive_insert_count;	/* drive insertion count */
-
-	u8	battery_status;
-	u8	num_ldrv;		/* No. of Log Drives configured */
-	u8	recon_state[MAX_LOGICAL_DRIVES_40LD / 8];	/* State of
-							   reconstruct */
-	u16	ldrv_op_status[MAX_LOGICAL_DRIVES_40LD / 8]; /* logdrv
-								 Status */
-
-	u32	ldrv_size[MAX_LOGICAL_DRIVES_40LD];/* Size of each log drv */
-	u8	ldrv_prop[MAX_LOGICAL_DRIVES_40LD];
-	u8	ldrv_state[MAX_LOGICAL_DRIVES_40LD];/* State of log drives */
-	u8	pdrv_state[FC_MAX_PHYSICAL_DEVICES];/* State of phys drvs. */
-	u16	pdrv_format[FC_MAX_PHYSICAL_DEVICES / 16];
-
-	u8	targ_xfer[80];	/* phys device transfer rate */
-	u8	pad1k[263];	/* 761 + 263reserved = 1024 bytes total size */
-} __attribute__ ((packed)) mega_inquiry3;
-
-
-/* Structures */
-typedef struct {
-	u8	max_commands;	/* Max concurrent commands supported */
-	u8	rebuild_rate;	/* Rebuild rate - 0% thru 100% */
-	u8	max_targ_per_chan;	/* Max targ per channel */
-	u8	nchannels;	/* Number of channels on HBA */
-	u8	fw_version[4];	/* Firmware version */
-	u16	age_of_flash;	/* Number of times FW has been flashed */
-	u8	chip_set_value;	/* Contents of 0xC0000832 */
-	u8	dram_size;	/* In MB */
-	u8	cache_flush_interval;	/* in seconds */
-	u8	bios_version[4];
-	u8	board_type;
-	u8	sense_alert;
-	u8	write_config_count;	/* Increase with every configuration
-					   change */
-	u8	drive_inserted_count;	/* Increase with every drive inserted
-					 */
-	u8	inserted_drive;	/* Channel:Id of inserted drive */
-	u8	battery_status;	/*
-				 * BIT 0: battery module missing
-				 * BIT 1: VBAD
-				 * BIT 2: temperature high
-				 * BIT 3: battery pack missing
-				 * BIT 4,5:
-				 *   00 - charge complete
-				 *   01 - fast charge in progress
-				 *   10 - fast charge fail
-				 *   11 - undefined
-				 * Bit 6: counter > 1000
-				 * Bit 7: Undefined
-				 */
-	u8	dec_fault_bus_info;
-} __attribute__ ((packed)) mega_adp_info;
-
-
-typedef struct {
-	u8	num_ldrv;	/* Number of logical drives configured */
-	u8	rsvd[3];
-	u32	ldrv_size[MAX_LOGICAL_DRIVES_8LD];
-	u8	ldrv_prop[MAX_LOGICAL_DRIVES_8LD];
-	u8	ldrv_state[MAX_LOGICAL_DRIVES_8LD];
-} __attribute__ ((packed)) mega_ldrv_info;
-
-typedef struct {
-	u8	pdrv_state[MAX_PHYSICAL_DRIVES];
-	u8	rsvd;
-} __attribute__ ((packed)) mega_pdrv_info;
-
-/* RAID inquiry: Mailbox command 0x05*/
-typedef struct {
-	mega_adp_info	adapter_info;
-	mega_ldrv_info	logdrv_info;
-	mega_pdrv_info	pdrv_info;
-} __attribute__ ((packed)) mraid_inquiry;
-
-
-/* RAID extended inquiry: Mailbox command 0x04*/
-typedef struct {
-	mraid_inquiry	raid_inq;
-	u16	phys_drv_format[MAX_CHANNELS];
-	u8	stack_attn;
-	u8	modem_status;
-	u8	rsvd[2];
-} __attribute__ ((packed)) mraid_ext_inquiry;
-
-
-typedef struct {
-	u8	channel;
-	u8	target;
-}__attribute__ ((packed)) adp_device;
-
-typedef struct {
-	u32		start_blk;	/* starting block */
-	u32		num_blks;	/* # of blocks */
-	adp_device	device[MAX_ROW_SIZE_40LD];
-}__attribute__ ((packed)) adp_span_40ld;
-
-typedef struct {
-	u32		start_blk;	/* starting block */
-	u32		num_blks;	/* # of blocks */
-	adp_device	device[MAX_ROW_SIZE_8LD];
-}__attribute__ ((packed)) adp_span_8ld;
-
-typedef struct {
-	u8	span_depth;	/* Total # of spans */
-	u8	level;		/* RAID level */
-	u8	read_ahead;	/* read ahead, no read ahead, adaptive read
-				   ahead */
-	u8	stripe_sz;	/* Encoded stripe size */
-	u8	status;		/* Status of the logical drive */
-	u8	write_mode;	/* write mode, write_through/write_back */
-	u8	direct_io;	/* direct io or through cache */
-	u8	row_size;	/* Number of stripes in a row */
-} __attribute__ ((packed)) logdrv_param;
-
-typedef struct {
-	logdrv_param	lparam;
-	adp_span_40ld	span[MAX_SPAN_DEPTH];
-}__attribute__ ((packed)) logdrv_40ld;
-
-typedef struct {
-	logdrv_param	lparam;
-	adp_span_8ld	span[MAX_SPAN_DEPTH];
-}__attribute__ ((packed)) logdrv_8ld;
-
-typedef struct {
-	u8	type;		/* Type of the device */
-	u8	cur_status;	/* current status of the device */
-	u8	tag_depth;	/* Level of tagging */
-	u8	sync_neg;	/* sync negotiation - ENABLE or DISABLE */
-	u32	size;		/* configurable size in terms of 512 byte
-				   blocks */
-}__attribute__ ((packed)) phys_drv;
-
-typedef struct {
-	u8		nlog_drives;		/* number of logical drives */
-	u8		resvd[3];
-	logdrv_40ld	ldrv[MAX_LOGICAL_DRIVES_40LD];
-	phys_drv	pdrv[MAX_PHYSICAL_DRIVES];
-}__attribute__ ((packed)) disk_array_40ld;
-
-typedef struct {
-	u8		nlog_drives;	/* number of logical drives */
-	u8		resvd[3];
-	logdrv_8ld	ldrv[MAX_LOGICAL_DRIVES_8LD];
-	phys_drv	pdrv[MAX_PHYSICAL_DRIVES];
-}__attribute__ ((packed)) disk_array_8ld;
-
-
-/*
- * User ioctl structure.
- * This structure will be used for Traditional Method ioctl interface
- * commands (0x80),Alternate Buffer Method (0x81) ioctl commands and the
- * Driver ioctls.
- * The Driver ioctl interface handles the commands at the driver level,
- * without being sent to the card.
- */
-/* system call imposed limit. Change accordingly */
-#define IOCTL_MAX_DATALEN       4096
-
-struct uioctl_t {
-	u32 inlen;
-	u32 outlen;
-	union {
-		u8 fca[16];
-		struct {
-			u8 opcode;
-			u8 subopcode;
-			u16 adapno;
-#if BITS_PER_LONG == 32
-			u8 *buffer;
-			u8 pad[4];
-#endif
-#if BITS_PER_LONG == 64
-			u8 *buffer;
-#endif
-			u32 length;
-		} __attribute__ ((packed)) fcs;
-	} __attribute__ ((packed)) ui;
-	u8 mbox[18];		/* 16 bytes + 2 status bytes */
-	mega_passthru pthru;
-#if BITS_PER_LONG == 32
-	char __user *data;		/* buffer <= 4096 for 0x80 commands */
-	char pad[4];
-#endif
-#if BITS_PER_LONG == 64
-	char __user *data;
-#endif
-} __attribute__ ((packed));
-
-/*
- * struct mcontroller is used to pass information about the controllers in the
- * system. Its up to the application how to use the information. We are passing
- * as much info about the cards as possible and useful. Before issuing the
- * call to find information about the cards, the application needs to issue a
- * ioctl first to find out the number of controllers in the system.
- */
-#define MAX_CONTROLLERS 32
-
-struct mcontroller {
-	u64 base;
-	u8 irq;
-	u8 numldrv;
-	u8 pcibus;
-	u16 pcidev;
-	u8 pcifun;
-	u16 pciid;
-	u16 pcivendor;
-	u8 pcislot;
-	u32 uid;
-};
-
-/*
- * mailbox structure used for internal commands
- */
-typedef struct {
-	u8	cmd;
-	u8	cmdid;
-	u8	opcode;
-	u8	subopcode;
-	u32	lba;
-	u32	xferaddr;
-	u8	logdrv;
-	u8	rsvd[3];
-	u8	numstatus;
-	u8	status;
-} __attribute__ ((packed)) megacmd_t;
-
-/*
- * Defines for Driver IOCTL interface
- */
-#define MEGAIOC_MAGIC  	'm'
-
-#define MEGAIOC_QNADAP		'm'	/* Query # of adapters */
-#define MEGAIOC_QDRVRVER	'e'	/* Query driver version */
-#define MEGAIOC_QADAPINFO   	'g'	/* Query adapter information */
-#define MKADAP(adapno)	  	(MEGAIOC_MAGIC << 8 | (adapno) )
-#define GETADAP(mkadap)	 	( (mkadap) ^ MEGAIOC_MAGIC << 8 )
-
-/*
- * Definition for the new ioctl interface (NIT)
- */
-
-/*
- * Vendor specific Group-7 commands
- */
-#define VENDOR_SPECIFIC_COMMANDS	0xE0
-#define MEGA_INTERNAL_CMD		VENDOR_SPECIFIC_COMMANDS + 0x01
-
-/*
- * The ioctl command. No other command shall be used for this interface
- */
-#define USCSICMD	VENDOR_SPECIFIC_COMMANDS
-
-/*
- * Data direction flags
- */
-#define UIOC_RD		0x00001
-#define UIOC_WR		0x00002
-
-/*
- * ioctl opcodes
- */
-#define MBOX_CMD	0x00000	/* DCMD or passthru command */
-#define GET_DRIVER_VER	0x10000	/* Get driver version */
-#define GET_N_ADAP	0x20000	/* Get number of adapters */
-#define GET_ADAP_INFO	0x30000	/* Get information about a adapter */
-#define GET_CAP		0x40000	/* Get ioctl capabilities */
-#define GET_STATS	0x50000	/* Get statistics, including error info */
-
-
-/*
- * The ioctl structure.
- * MBOX macro converts a nitioctl_t structure to megacmd_t pointer and
- * MBOX_P macro converts a nitioctl_t pointer to megacmd_t pointer.
- */
-typedef struct {
-	char		signature[8];	/* Must contain "MEGANIT" */
-	u32		opcode;		/* opcode for the command */
-	u32		adapno;		/* adapter number */
-	union {
-		u8	__raw_mbox[18];
-		void __user *__uaddr; /* xferaddr for non-mbox cmds */
-	}__ua;
-
-#define uioc_rmbox	__ua.__raw_mbox
-#define MBOX(uioc)	((megacmd_t *)&((uioc).__ua.__raw_mbox[0]))
-#define MBOX_P(uioc)	((megacmd_t __user *)&((uioc)->__ua.__raw_mbox[0]))
-#define uioc_uaddr	__ua.__uaddr
-
-	u32		xferlen;	/* xferlen for DCMD and non-mbox
-					   commands */
-	u32		flags;		/* data direction flags */
-}nitioctl_t;
-
-
-/*
- * I/O statistics for some applications like SNMP agent. The caller must
- * provide the number of logical drives for which status should be reported.
- */
-typedef struct {
-	int	num_ldrv;	/* Number for logical drives for which the
-				   status should be reported. */
-	u32	nreads[MAX_LOGICAL_DRIVES_40LD];	/* number of reads for
-							each logical drive */
-	u32	nreadblocks[MAX_LOGICAL_DRIVES_40LD];	/* number of blocks
-							read for each logical
-							drive */
-	u32	nwrites[MAX_LOGICAL_DRIVES_40LD];	/* number of writes
-							for each logical
-							drive */
-	u32	nwriteblocks[MAX_LOGICAL_DRIVES_40LD];	/* number of blocks
-							writes for each
-							logical drive */
-	u32	rd_errors[MAX_LOGICAL_DRIVES_40LD];	/* number of read
-							   errors for each
-							   logical drive */
-	u32	wr_errors[MAX_LOGICAL_DRIVES_40LD];	/* number of write
-							   errors for each
-							   logical drive */
-}megastat_t;
-
-
-struct private_bios_data {
-	u8	geometry:4;	/*
-				 * bits 0-3 - BIOS geometry
-				 * 0x0001 - 1GB
-				 * 0x0010 - 2GB
-				 * 0x1000 - 8GB
-				 * Others values are invalid
-							 */
-	u8	unused:4;	/* bits 4-7 are unused */
-	u8	boot_drv;	/*
-				 * logical drive set as boot drive
-				 * 0..7 - for 8LD cards
-				 * 0..39 - for 40LD cards
-				 */
-	u8	rsvd[12];
-	u16	cksum;	/* 0-(sum of first 13 bytes of this structure) */
-} __attribute__ ((packed));
-
-
-
-
-/*
- * Mailbox and firmware commands and subopcodes used in this driver.
- */
-
-#define MEGA_MBOXCMD_LREAD	0x01
-#define MEGA_MBOXCMD_LWRITE	0x02
-#define MEGA_MBOXCMD_PASSTHRU	0x03
-#define MEGA_MBOXCMD_ADPEXTINQ	0x04
-#define MEGA_MBOXCMD_ADAPTERINQ	0x05
-#define MEGA_MBOXCMD_LREAD64	0xA7
-#define MEGA_MBOXCMD_LWRITE64	0xA8
-#define MEGA_MBOXCMD_PASSTHRU64	0xC3
-#define MEGA_MBOXCMD_EXTPTHRU	0xE3
-
-#define MAIN_MISC_OPCODE	0xA4	/* f/w misc opcode */
-#define GET_MAX_SG_SUPPORT	0x01	/* get max sg len supported by f/w */
-
-#define FC_NEW_CONFIG		0xA1
-#define NC_SUBOP_PRODUCT_INFO	0x0E
-#define NC_SUBOP_ENQUIRY3	0x0F
-#define ENQ3_GET_SOLICITED_FULL	0x02
-#define OP_DCMD_READ_CONFIG	0x04
-#define NEW_READ_CONFIG_8LD	0x67
-#define READ_CONFIG_8LD		0x07
-#define FLUSH_ADAPTER		0x0A
-#define FLUSH_SYSTEM		0xFE
-
-/*
- * Command for random deletion of logical drives
- */
-#define	FC_DEL_LOGDRV		0xA4	/* f/w command */
-#define	OP_SUP_DEL_LOGDRV	0x2A	/* is feature supported */
-#define OP_GET_LDID_MAP		0x18	/* get ldid and logdrv number map */
-#define OP_DEL_LOGDRV		0x1C	/* delete logical drive */
-
-/*
- * BIOS commands
- */
-#define IS_BIOS_ENABLED		0x62
-#define GET_BIOS		0x01
-#define CHNL_CLASS		0xA9
-#define GET_CHNL_CLASS		0x00
-#define SET_CHNL_CLASS		0x01
-#define CH_RAID			0x01
-#define CH_SCSI			0x00
-#define BIOS_PVT_DATA		0x40
-#define GET_BIOS_PVT_DATA	0x00
-
-
-/*
- * Commands to support clustering
- */
-#define MEGA_GET_TARGET_ID	0x7D
-#define MEGA_CLUSTER_OP		0x70
-#define MEGA_GET_CLUSTER_MODE	0x02
-#define MEGA_CLUSTER_CMD	0x6E
-#define MEGA_RESERVE_LD		0x01
-#define MEGA_RELEASE_LD		0x02
-#define MEGA_RESET_RESERVATIONS	0x03
-#define MEGA_RESERVATION_STATUS	0x04
-#define MEGA_RESERVE_PD		0x05
-#define MEGA_RELEASE_PD		0x06
-
-
-/*
- * Module battery status
- */
-#define MEGA_BATT_MODULE_MISSING	0x01
-#define MEGA_BATT_LOW_VOLTAGE		0x02
-#define MEGA_BATT_TEMP_HIGH		0x04
-#define MEGA_BATT_PACK_MISSING		0x08
-#define MEGA_BATT_CHARGE_MASK		0x30
-#define MEGA_BATT_CHARGE_DONE		0x00
-#define MEGA_BATT_CHARGE_INPROG		0x10
-#define MEGA_BATT_CHARGE_FAIL		0x20
-#define MEGA_BATT_CYCLES_EXCEEDED	0x40
-
-/*
- * Physical drive states.
- */
-#define PDRV_UNCNF	0
-#define PDRV_ONLINE	3
-#define PDRV_FAILED	4
-#define PDRV_RBLD	5
-#define PDRV_HOTSPARE	6
-
-
-/*
- * Raid logical drive states.
- */
-#define RDRV_OFFLINE	0
-#define RDRV_DEGRADED	1
-#define RDRV_OPTIMAL	2
-#define RDRV_DELETED	3
-
-/*
- * Read, write and cache policies
- */
-#define NO_READ_AHEAD		0
-#define READ_AHEAD		1
-#define ADAP_READ_AHEAD		2
-#define WRMODE_WRITE_THRU	0
-#define WRMODE_WRITE_BACK	1
-#define CACHED_IO		0
-#define DIRECT_IO		1
-
-
-#define SCSI_LIST(scp) ((struct list_head *)(&(scp)->SCp))
-
-/*
- * Each controller's soft state
- */
-typedef struct {
-	int	this_id;	/* our id, may set to different than 7 if
-				   clustering is available */
-	u32	flag;
-
-	unsigned long		base;
-	void __iomem		*mmio_base;
-
-	/* mbox64 with mbox not aligned on 16-byte boundary */
-	mbox64_t	*una_mbox64;
-	dma_addr_t	una_mbox64_dma;
-
-	volatile mbox64_t	*mbox64;/* ptr to 64-bit mailbox */
-	volatile mbox_t		*mbox;	/* ptr to standard mailbox */
-	dma_addr_t		mbox_dma;
-
-	struct pci_dev	*dev;
-
-	struct list_head	free_list;
-	struct list_head	pending_list;
-	struct list_head	completed_list;
-
-	struct Scsi_Host	*host;
-
-#define MEGA_BUFFER_SIZE (2*1024)
-	u8		*mega_buffer;
-	dma_addr_t	buf_dma_handle;
-
-	mega_product_info	product_info;
-
-	u8		max_cmds;
-	scb_t		*scb_list;
-
-	atomic_t	pend_cmds;	/* maintain a counter for pending
-					   commands in firmware */
-
-#if MEGA_HAVE_STATS
-	u32	nreads[MAX_LOGICAL_DRIVES_40LD];
-	u32	nreadblocks[MAX_LOGICAL_DRIVES_40LD];
-	u32	nwrites[MAX_LOGICAL_DRIVES_40LD];
-	u32	nwriteblocks[MAX_LOGICAL_DRIVES_40LD];
-	u32	rd_errors[MAX_LOGICAL_DRIVES_40LD];
-	u32	wr_errors[MAX_LOGICAL_DRIVES_40LD];
-#endif
-
-	/* Host adapter parameters */
-	u8	numldrv;
-	u8	fw_version[7];
-	u8	bios_version[7];
-
-#ifdef CONFIG_PROC_FS
-	struct proc_dir_entry	*controller_proc_dir_entry;
-	struct proc_dir_entry	*proc_read;
-	struct proc_dir_entry	*proc_stat;
-	struct proc_dir_entry	*proc_mbox;
-
-#if MEGA_HAVE_ENH_PROC
-	struct proc_dir_entry	*proc_rr;
-	struct proc_dir_entry	*proc_battery;
-#define MAX_PROC_CHANNELS	4
-	struct proc_dir_entry	*proc_pdrvstat[MAX_PROC_CHANNELS];
-	struct proc_dir_entry	*proc_rdrvstat[MAX_PROC_CHANNELS];
-#endif
-
-#endif
-
-	int	has_64bit_addr;		/* are we using 64-bit addressing */
-	int	support_ext_cdb;
-	int	boot_ldrv_enabled;
-	int	boot_ldrv;
-	int	boot_pdrv_enabled;	/* boot from physical drive */
-	int	boot_pdrv_ch;		/* boot physical drive channel */
-	int	boot_pdrv_tgt;		/* boot physical drive target */
-
-
-	int	support_random_del;	/* Do we support random deletion of
-					   logdrvs */
-	int	read_ldidmap;	/* set after logical drive deltion. The
-				   logical drive number must be read from the
-				   map */
-	atomic_t	quiescent;	/* a stage reached when delete logical
-					   drive needs to be done. Stop
-					   sending requests to the hba till
-					   delete operation is completed */
-	spinlock_t	lock;
-
-	u8	logdrv_chan[MAX_CHANNELS+NVIRT_CHAN]; /* logical drive are on
-							what channels. */
-	int	mega_ch_class;
-
-	u8	sglen;	/* f/w supported scatter-gather list length */
-
-	scb_t			int_scb;
-	struct mutex		int_mtx;	/* To synchronize the internal
-						commands */
-	int			int_status;	/* status of internal cmd */
-	struct completion	int_waitq;	/* wait queue for internal
-						 cmds */
-
-	int	has_cluster;	/* cluster support on this HBA */
-}adapter_t;
-
-
-struct mega_hbas {
-	int is_bios_enabled;
-	adapter_t *hostdata_addr;
-};
-
-
-/*
- * For state flag. Do not use LSB(8 bits) which are
- * reserved for storing info about channels.
- */
-#define IN_ABORT	0x80000000L
-#define IN_RESET	0x40000000L
-#define BOARD_MEMMAP	0x20000000L
-#define BOARD_IOMAP	0x10000000L
-#define BOARD_40LD   	0x08000000L
-#define BOARD_64BIT	0x04000000L
-
-#define INTR_VALID			0x40
-
-#define PCI_CONF_AMISIG			0xa0
-#define PCI_CONF_AMISIG64		0xa4
-
-
-#define MEGA_DMA_TYPE_NONE		0xFFFF
-#define MEGA_BULK_DATA			0x0001
-#define MEGA_SGLIST			0x0002
-
-/*
- * Parameters for the io-mapped controllers
- */
-
-/* I/O Port offsets */
-#define CMD_PORT	 	0x00
-#define ACK_PORT	 	0x00
-#define TOGGLE_PORT		0x01
-#define INTR_PORT	  	0x0a
-
-#define MBOX_BUSY_PORT     	0x00
-#define MBOX_PORT0	 	0x04
-#define MBOX_PORT1	 	0x05
-#define MBOX_PORT2	 	0x06
-#define MBOX_PORT3	 	0x07
-#define ENABLE_MBOX_REGION 	0x0B
-
-/* I/O Port Values */
-#define ISSUE_BYTE	 	0x10
-#define ACK_BYTE	   	0x08
-#define ENABLE_INTR_BYTE   	0xc0
-#define DISABLE_INTR_BYTE  	0x00
-#define VALID_INTR_BYTE    	0x40
-#define MBOX_BUSY_BYTE     	0x10
-#define ENABLE_MBOX_BYTE   	0x00
-
-
-/* Setup some port macros here */
-#define issue_command(adapter)	\
-		outb_p(ISSUE_BYTE, (adapter)->base + CMD_PORT)
-
-#define irq_state(adapter)	inb_p((adapter)->base + INTR_PORT)
-
-#define set_irq_state(adapter, value)	\
-		outb_p((value), (adapter)->base + INTR_PORT)
-
-#define irq_ack(adapter)	\
-		outb_p(ACK_BYTE, (adapter)->base + ACK_PORT)
-
-#define irq_enable(adapter)	\
-	outb_p(ENABLE_INTR_BYTE, (adapter)->base + TOGGLE_PORT)
-
-#define irq_disable(adapter)	\
-	outb_p(DISABLE_INTR_BYTE, (adapter)->base + TOGGLE_PORT)
-
-
-/*
- * This is our SYSDEP area. All kernel specific detail should be placed here -
- * as much as possible
- */
-
-/*
- * End of SYSDEP area
- */
-
-const char *megaraid_info (struct Scsi_Host *);
-
-static int mega_query_adapter(adapter_t *);
-static int issue_scb(adapter_t *, scb_t *);
-static int mega_setup_mailbox(adapter_t *);
-
-static int megaraid_queue (struct Scsi_Host *, struct scsi_cmnd *);
-static scb_t * mega_build_cmd(adapter_t *, Scsi_Cmnd *, int *);
-static void __mega_runpendq(adapter_t *);
-static int issue_scb_block(adapter_t *, u_char *);
-
-static irqreturn_t megaraid_isr_memmapped(int, void *);
-static irqreturn_t megaraid_isr_iomapped(int, void *);
-
-static void mega_free_scb(adapter_t *, scb_t *);
-
-static int megaraid_abort(Scsi_Cmnd *);
-static int megaraid_reset(Scsi_Cmnd *);
-static int megaraid_abort_and_reset(adapter_t *, Scsi_Cmnd *, int);
-static int megaraid_biosparam(struct scsi_device *, struct block_device *,
-		sector_t, int []);
-
-static int mega_build_sglist (adapter_t *adapter, scb_t *scb,
-			      u32 *buffer, u32 *length);
-static int __mega_busywait_mbox (adapter_t *);
-static void mega_rundoneq (adapter_t *);
-static void mega_cmd_done(adapter_t *, u8 [], int, int);
-static inline void mega_free_sgl (adapter_t *adapter);
-static void mega_8_to_40ld (mraid_inquiry *inquiry,
-		mega_inquiry3 *enquiry3, mega_product_info *);
-
-static int megadev_open (struct inode *, struct file *);
-static int megadev_ioctl (struct file *, unsigned int, unsigned long);
-static int mega_m_to_n(void __user *, nitioctl_t *);
-static int mega_n_to_m(void __user *, megacmd_t *);
-
-static int mega_init_scb (adapter_t *);
-
-static int mega_is_bios_enabled (adapter_t *);
-
-#ifdef CONFIG_PROC_FS
-static void mega_create_proc_entry(int, struct proc_dir_entry *);
-static int mega_adapinq(adapter_t *, dma_addr_t);
-static int mega_internal_dev_inquiry(adapter_t *, u8, u8, dma_addr_t);
-#endif
-
-static int mega_support_ext_cdb(adapter_t *);
-static mega_passthru* mega_prepare_passthru(adapter_t *, scb_t *,
-		Scsi_Cmnd *, int, int);
-static mega_ext_passthru* mega_prepare_extpassthru(adapter_t *,
-		scb_t *, Scsi_Cmnd *, int, int);
-static void mega_enum_raid_scsi(adapter_t *);
-static void mega_get_boot_drv(adapter_t *);
-static int mega_support_random_del(adapter_t *);
-static int mega_del_logdrv(adapter_t *, int);
-static int mega_do_del_logdrv(adapter_t *, int);
-static void mega_get_max_sgl(adapter_t *);
-static int mega_internal_command(adapter_t *, megacmd_t *, mega_passthru *);
-static int mega_support_cluster(adapter_t *);
-#endif
-
-/* vi: set ts=8 sw=8 tw=78: */
diff --git a/drivers/scsi/megaraid/Kconfig.megaraid b/drivers/scsi/megaraid/Kconfig.megaraid
index 17419e3..ad1dc16 100644
--- a/drivers/scsi/megaraid/Kconfig.megaraid
+++ b/drivers/scsi/megaraid/Kconfig.megaraid
@@ -64,17 +64,6 @@  config MEGARAID_MAILBOX
 	To compile this driver as a module, choose M here: the
 	module will be called megaraid_mbox
 
-config MEGARAID_LEGACY
-	tristate "LSI Logic Legacy MegaRAID Driver"
-	depends on PCI && SCSI
-	help
-	This driver supports the LSI MegaRAID 418, 428, 438, 466, 762, 490
-	and 467 SCSI host adapters. This driver also support the all U320
-	RAID controllers
-
-	To compile this driver as a module, choose M here: the
-	module will be called megaraid
-
 config MEGARAID_SAS
 	tristate "LSI Logic MegaRAID SAS RAID Module"
 	depends on PCI && SCSI