From patchwork Tue Oct 10 13:11:19 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sreekanth Reddy X-Patchwork-Id: 9996101 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id AEE28603B5 for ; Tue, 10 Oct 2017 13:14:12 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 9D12A285C9 for ; Tue, 10 Oct 2017 13:14:12 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 91580285CA; Tue, 10 Oct 2017 13:14:12 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.5 required=2.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,RCVD_IN_DNSWL_HI,RCVD_IN_SORBS_SPAM autolearn=unavailable version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id E779D285CF for ; Tue, 10 Oct 2017 13:14:09 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932071AbdJJNM2 (ORCPT ); Tue, 10 Oct 2017 09:12:28 -0400 Received: from mail-qt0-f171.google.com ([209.85.216.171]:50322 "EHLO mail-qt0-f171.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756331AbdJJNMY (ORCPT ); Tue, 10 Oct 2017 09:12:24 -0400 Received: by mail-qt0-f171.google.com with SMTP id f15so50966671qtf.7 for ; Tue, 10 Oct 2017 06:12:24 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=broadcom.com; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=ti8qPTEYt9idmpgLEQirMF87dp+eXF2n76JwdAiGVSo=; b=C1Zo4q+F0PsvgzUO7rdftjbkWGilIQ6s4bYHCL2IFrq9hmHacBtqOG/2VVBD0SbLGk uOHGFv2ZxMMSioirkeiTKUwMvdxfSMC9lIXs2Ovt1BSoAc4DszD+026xcDMeW2OJ++Rn A8HUHEkwapzZlRXH9Bj3tgitbSnCbSEQf1bEg= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=ti8qPTEYt9idmpgLEQirMF87dp+eXF2n76JwdAiGVSo=; b=jCMMMD3TkgQboR7LMZ0bvg41byKZzImArNtcleqpL55s6rKI0jgOwQS32DnBlHkOXX wsVSeoB3GLJkIOyIl2aup1qCiOW8XgNWz/QKT+G8pwyhLenT+Tgpwtm/5SLPhmWq9mzM 1y46bhZ5h6vdXxFn0MGrbc3SqxA7x/M0cpBln5rgwYUNiN4MJ0czHp+b9jDDCcGC+/Xd LYZYlSD7sEFJBZQAB+XwHYiFN9KbkgIVCJMRNtvOhkUl5PCCPsLcUiRYOew6SAY2YHbM irIhbY7xFRL6TofYxeT1v28N+rrTLkWYI7ujMfvs4mDzkgZDVihvTbcShmF256Nz4jwB lxYA== X-Gm-Message-State: AMCzsaVPTA714bKQd3xHgZi+rOBdrDrZRG8s61woUJ4hhkrysMP1bPws au/EcmNyRJ0IV9fzRT8rolsi5tMY X-Google-Smtp-Source: AOwi7QDhu76FlimYoAoDtrM0Gt3/X+QqCCUwvHiYU+r0SBSsgGWoli9CjXxJCtBHu+yV+RBJjUa6WQ== X-Received: by 10.55.197.9 with SMTP id p9mr14225359qki.113.1507641142380; Tue, 10 Oct 2017 06:12:22 -0700 (PDT) Received: from host1.dhcp.avagotech.net ([192.19.239.250]) by smtp.gmail.com with ESMTPSA id h135sm634004qke.5.2017.10.10.06.12.18 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Tue, 10 Oct 2017 06:12:21 -0700 (PDT) From: Sreekanth Reddy X-Google-Original-From: Sreekanth Reddy To: linux-scsi@vger.kernel.org, hch@infradead.org Cc: martin.petersen@oracle.com, JBottomley@Parallels.com, Sathya.Prakash@broadcom.com, linux-kernel@vger.kernel.org, Sreekanth Reddy Subject: [PATCH 06/10] mpt3sas: Updated MPI headers to v2.00.48 Date: Tue, 10 Oct 2017 18:41:19 +0530 Message-Id: <1507641083-20207-7-git-send-email-Sreekanth.Reddy@broadcom.com> X-Mailer: git-send-email 2.0.2 In-Reply-To: <1507641083-20207-1-git-send-email-Sreekanth.Reddy@broadcom.com> References: <1507641083-20207-1-git-send-email-Sreekanth.Reddy@broadcom.com> Sender: linux-scsi-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-scsi@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Updated MPI headers to v2.00.48 Signed-off-by: Sreekanth Reddy Signed-off-by: Tomas Henzl --- drivers/scsi/mpt3sas/mpi/mpi2.h | 43 ++- drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 564 +++++++++++++++++++++++++++++++++-- drivers/scsi/mpt3sas/mpi/mpi2_init.h | 11 +- drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 282 +++++++++++++++++- drivers/scsi/mpt3sas/mpi/mpi2_pci.h | 112 +++++++ drivers/scsi/mpt3sas/mpi/mpi2_tool.h | 14 +- 6 files changed, 992 insertions(+), 34 deletions(-) create mode 100644 drivers/scsi/mpt3sas/mpi/mpi2_pci.h diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h index a9a659f..bc59058 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2.h @@ -8,7 +8,7 @@ * scatter/gather formats. * Creation Date: June 21, 2006 * - * mpi2.h Version: 02.00.42 + * mpi2.h Version: 02.00.48 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used @@ -103,6 +103,16 @@ * 08-25-15 02.00.40 Bumped MPI2_HEADER_VERSION_UNIT. * 12-15-15 02.00.41 Bumped MPI_HEADER_VERSION_UNIT * 01-01-16 02.00.42 Bumped MPI_HEADER_VERSION_UNIT + * 04-05-16 02.00.43 Modified MPI26_DIAG_BOOT_DEVICE_SELECT defines + * to be unique within first 32 characters. + * Removed AHCI support. + * Removed SOP support. + * Bumped MPI2_HEADER_VERSION_UNIT. + * 04-10-16 02.00.44 Bumped MPI2_HEADER_VERSION_UNIT. + * 07-06-16 02.00.45 Bumped MPI2_HEADER_VERSION_UNIT. + * 09-02-16 02.00.46 Bumped MPI2_HEADER_VERSION_UNIT. + * 11-23-16 02.00.47 Bumped MPI2_HEADER_VERSION_UNIT. + * 02-03-17 02.00.48 Bumped MPI2_HEADER_VERSION_UNIT. * -------------------------------------------------------------------------- */ @@ -142,7 +152,7 @@ #define MPI2_VERSION_02_06 (0x0206) /*Unit and Dev versioning for this MPI header set */ -#define MPI2_HEADER_VERSION_UNIT (0x2A) +#define MPI2_HEADER_VERSION_UNIT (0x30) #define MPI2_HEADER_VERSION_DEV (0x00) #define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00) #define MPI2_HEADER_VERSION_UNIT_SHIFT (8) @@ -249,6 +259,12 @@ typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS { #define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT (0x00000000) #define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW (0x00000800) +/* Defines for V7A/V7R HostDiagnostic Register */ +#define MPI26_DIAG_BOOT_DEVICE_SEL_64FLASH (0x00000000) +#define MPI26_DIAG_BOOT_DEVICE_SEL_64HCDW (0x00000800) +#define MPI26_DIAG_BOOT_DEVICE_SEL_32FLASH (0x00001000) +#define MPI26_DIAG_BOOT_DEVICE_SEL_32HCDW (0x00001800) + #define MPI2_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400) #define MPI2_DIAG_FORCE_HCB_ON_RESET (0x00000200) #define MPI2_DIAG_HCB_MODE (0x00000100) @@ -367,6 +383,7 @@ typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR { #define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE (0x08) #define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR (0x0A) #define MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO (0x0C) +#define MPI26_REQ_DESCRIPT_FLAGS_PCIE_ENCAPSULATED (0x10) #define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01) @@ -425,6 +442,13 @@ typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR Mpi25FastPathSCSIIORequestDescriptor_t, *pMpi25FastPathSCSIIORequestDescriptor_t; +/*PCIe Encapsulated Request Descriptor */ +typedef MPI2_SCSI_IO_REQUEST_DESCRIPTOR + MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR, + *PTR_MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR, + Mpi26PCIeEncapsulatedRequestDescriptor_t, + *pMpi26PCIeEncapsulatedRequestDescriptor_t; + /*union of Request Descriptors */ typedef union _MPI2_REQUEST_DESCRIPTOR_UNION { MPI2_DEFAULT_REQUEST_DESCRIPTOR Default; @@ -433,6 +457,7 @@ typedef union _MPI2_REQUEST_DESCRIPTOR_UNION { MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget; MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR RAIDAccelerator; MPI25_FP_SCSI_IO_REQUEST_DESCRIPTOR FastPathSCSIIO; + MPI26_PCIE_ENCAPSULATED_REQUEST_DESCRIPTOR PCIeEncapsulated; U64 Words; } MPI2_REQUEST_DESCRIPTOR_UNION, *PTR_MPI2_REQUEST_DESCRIPTOR_UNION, @@ -450,6 +475,7 @@ typedef union _MPI2_REQUEST_DESCRIPTOR_UNION { * Atomic SCSI Target Request Descriptor * Atomic RAID Accelerator Request Descriptor * Atomic Fast Path SCSI IO Request Descriptor + * Atomic PCIe Encapsulated Request Descriptor */ /*Atomic Request Descriptor */ @@ -487,6 +513,7 @@ typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR { #define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03) #define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS (0x05) #define MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS (0x06) +#define MPI26_RPY_DESCRIPT_FLAGS_PCIE_ENCAPSULATED_SUCCESS (0x08) #define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F) /*values for marking a reply descriptor as unused */ @@ -565,6 +592,13 @@ typedef MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR Mpi25FastPathSCSIIOSuccessReplyDescriptor_t, *pMpi25FastPathSCSIIOSuccessReplyDescriptor_t; +/*PCIe Encapsulated Success Reply Descriptor */ +typedef MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR + MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR, + *PTR_MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR, + Mpi26PCIeEncapsulatedSuccessReplyDescriptor_t, + *pMpi26PCIeEncapsulatedSuccessReplyDescriptor_t; + /*union of Reply Descriptors */ typedef union _MPI2_REPLY_DESCRIPTORS_UNION { MPI2_DEFAULT_REPLY_DESCRIPTOR Default; @@ -574,6 +608,8 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION { MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer; MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR RAIDAcceleratorSuccess; MPI25_FP_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR FastPathSCSIIOSuccess; + MPI26_PCIE_ENCAPSULATED_SUCCESS_REPLY_DESCRIPTOR + PCIeEncapsulatedSuccess; U64 Words; } MPI2_REPLY_DESCRIPTORS_UNION, *PTR_MPI2_REPLY_DESCRIPTORS_UNION, @@ -616,6 +652,7 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION { #define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION (0x2F) #define MPI2_FUNCTION_PWR_MGMT_CONTROL (0x30) #define MPI2_FUNCTION_SEND_HOST_MESSAGE (0x31) +#define MPI2_FUNCTION_NVME_ENCAPSULATED (0x33) #define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0) #define MPI2_FUNCTION_MAX_PRODUCT_SPECIFIC (0xFF) @@ -1162,6 +1199,8 @@ typedef union _MPI25_SGE_IO_UNION { #define MPI26_IEEE_SGE_FLAGS_NSF_MASK (0x1C) #define MPI26_IEEE_SGE_FLAGS_NSF_MPI_IEEE (0x00) +#define MPI26_IEEE_SGE_FLAGS_NSF_NVME_PRP (0x08) +#define MPI26_IEEE_SGE_FLAGS_NSF_NVME_SGL (0x10) /*Data Location Address Space */ diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h index fa61baf..0666e71 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h @@ -6,7 +6,7 @@ * Title: MPI Configuration messages and pages * Creation Date: November 10, 2006 * - * mpi2_cnfg.h Version: 02.00.35 + * mpi2_cnfg.h Version: 02.00.40 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used @@ -189,6 +189,35 @@ * MPI2_CONFIG_PAGE_BIOS_1. * 08-25-15 02.00.34 Bumped Header Version. * 12-18-15 02.00.35 Added SATADeviceWaitTime to SAS IO Unit Page 4. + * 01-21-16 02.00.36 Added/modified MPI2_MFGPAGE_DEVID_SAS defines. + * Added Link field to PCIe Link Pages + * Added EnclosureLevel and ConnectorName to PCIe + * Device Page 0. + * Added define for PCIE IoUnit page 1 max rate shift. + * Added comment for reserved ExtPageTypes. + * Added SAS 4 22.5 gbs speed support. + * Added PCIe 4 16.0 GT/sec speec support. + * Removed AHCI support. + * Removed SOP support. + * Added NegotiatedLinkRate and NegotiatedPortWidth to + * PCIe device page 0. + * 04-10-16 02.00.37 Fixed MPI2_MFGPAGE_DEVID_SAS3616/3708 defines + * 07-01-16 02.00.38 Added Manufacturing page 7 Connector types. + * Changed declaration of ConnectorName in PCIe DevicePage0 + * to match SAS DevicePage 0. + * Added SATADeviceWaitTime to IO Unit Page 11. + * Added MPI26_MFGPAGE_DEVID_SAS4008 + * Added x16 PCIe width to IO Unit Page 7 + * Added LINKFLAGS to control SRIS in PCIe IO Unit page 1 + * phy data. + * Added InitStatus to PCIe IO Unit Page 1 header. + * 09-01-16 02.00.39 Added MPI26_CONFIG_PAGE_ENCLOSURE_0 and related defines. + * Added MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE and + * MPI26_ENCLOS_PGAD_FORM_HANDLE page address formats. + * 02-02-17 02.00.40 Added MPI2_MANPAGE7_SLOT_UNKNOWN. + * Added ChassisSlot field to SAS Enclosure Page 0. + * Added ChassisSlot Valid bit (bit 5) to the Flags field + * in SAS Enclosure Page 0. * -------------------------------------------------------------------------- */ @@ -272,6 +301,10 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION { #define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18) #define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19) #define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING (0x1A) +#define MPI2_CONFIG_EXTPAGETYPE_PCIE_IO_UNIT (0x1B) +#define MPI2_CONFIG_EXTPAGETYPE_PCIE_SWITCH (0x1C) +#define MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE (0x1D) +#define MPI2_CONFIG_EXTPAGETYPE_PCIE_LINK (0x1E) /***************************************************************************** @@ -339,6 +372,12 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION { #define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF) +/*Enclosure PageAddress format */ +#define MPI26_ENCLOS_PGAD_FORM_MASK (0xF0000000) +#define MPI26_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI26_ENCLOS_PGAD_FORM_HANDLE (0x10000000) + +#define MPI26_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF) /*RAID Configuration PageAddress format */ #define MPI2_RAID_PGAD_FORM_MASK (0xF0000000) @@ -365,6 +404,33 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION { #define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF) +/*PCIe Switch PageAddress format */ +#define MPI26_PCIE_SWITCH_PGAD_FORM_MASK (0xF0000000) +#define MPI26_PCIE_SWITCH_PGAD_FORM_GET_NEXT_HNDL (0x00000000) +#define MPI26_PCIE_SWITCH_PGAD_FORM_HNDL_PORTNUM (0x10000000) +#define MPI26_PCIE_SWITCH_EXPAND_PGAD_FORM_HNDL (0x20000000) + +#define MPI26_PCIE_SWITCH_PGAD_HANDLE_MASK (0x0000FFFF) +#define MPI26_PCIE_SWITCH_PGAD_PORTNUM_MASK (0x00FF0000) +#define MPI26_PCIE_SWITCH_PGAD_PORTNUM_SHIFT (16) + + +/*PCIe Device PageAddress format */ +#define MPI26_PCIE_DEVICE_PGAD_FORM_MASK (0xF0000000) +#define MPI26_PCIE_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE (0x20000000) + +#define MPI26_PCIE_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF) + +/*PCIe Link PageAddress format */ +#define MPI26_PCIE_LINK_PGAD_FORM_MASK (0xF0000000) +#define MPI26_PCIE_LINK_PGAD_FORM_GET_NEXT_LINK (0x00000000) +#define MPI26_PCIE_LINK_PGAD_FORM_LINK_NUM (0x10000000) + +#define MPI26_PCIE_DEVICE_PGAD_LINKNUM_MASK (0x000000FF) + + + /**************************************************************************** * Configuration messages ****************************************************************************/ @@ -484,6 +550,12 @@ typedef struct _MPI2_CONFIG_REPLY { #define MPI26_MFGPAGE_DEVID_SAS3508 (0x00AD) #define MPI26_MFGPAGE_DEVID_SAS3508_1 (0x00AE) #define MPI26_MFGPAGE_DEVID_SAS3408 (0x00AF) +#define MPI26_MFGPAGE_DEVID_SAS3716 (0x00D0) +#define MPI26_MFGPAGE_DEVID_SAS3616 (0x00D1) +#define MPI26_MFGPAGE_DEVID_SAS3708 (0x00D2) + +#define MPI26_MFGPAGE_DEVID_SAS4008 (0x00A1) + /*Manufacturing Page 0 */ @@ -726,6 +798,12 @@ typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO { #define MPI2_MANPAGE7_PINOUT_SFF_8644_8X (0x0B) #define MPI2_MANPAGE7_PINOUT_SFF_8644_16X (0x0C) #define MPI2_MANPAGE7_PINOUT_SFF_8436 (0x0D) +#define MPI2_MANPAGE7_PINOUT_SFF_8088_A (0x0E) +#define MPI2_MANPAGE7_PINOUT_SFF_8643_16i (0x0F) +#define MPI2_MANPAGE7_PINOUT_SFF_8654_4i (0x10) +#define MPI2_MANPAGE7_PINOUT_SFF_8654_8i (0x11) +#define MPI2_MANPAGE7_PINOUT_SFF_8611_4i (0x12) +#define MPI2_MANPAGE7_PINOUT_SFF_8611_8i (0x13) /*defines for the Location field */ #define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01) @@ -736,6 +814,9 @@ typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO { #define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20) #define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80) +/*defines for the Slot field */ +#define MPI2_MANPAGE7_SLOT_UNKNOWN (0xFFFF) + /* *Host code (drivers, BIOS, utilities, etc.) should leave this define set to *one and check the value returned for NumPhys at runtime. @@ -999,11 +1080,13 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 { #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02) #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04) #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08) +#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X16 (0x10) /*defines for IO Unit Page 7 PCIeSpeed field */ #define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00) #define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01) #define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02) +#define MPI2_IOUNITPAGE7_PCIE_SPEED_16_0_GBPS (0x03) /*defines for IO Unit Page 7 ProcessorState field */ #define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F) @@ -1970,6 +2053,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 { #define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09) #define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A) #define MPI25_SAS_NEG_LINK_RATE_12_0 (0x0B) +#define MPI26_SAS_NEG_LINK_RATE_22_5 (0x0C) /*values for AttachedPhyInfo fields */ @@ -2037,12 +2121,14 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 { #define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90) #define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0) #define MPI25_SAS_PRATE_MAX_RATE_12_0 (0xB0) +#define MPI26_SAS_PRATE_MAX_RATE_22_5 (0xC0) #define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F) #define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00) #define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08) #define MPI2_SAS_PRATE_MIN_RATE_3_0 (0x09) #define MPI2_SAS_PRATE_MIN_RATE_6_0 (0x0A) #define MPI25_SAS_PRATE_MIN_RATE_12_0 (0x0B) +#define MPI26_SAS_PRATE_MIN_RATE_22_5 (0x0C) /*values for SAS HwLinkRate fields */ @@ -2051,11 +2137,13 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 { #define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90) #define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0) #define MPI25_SAS_HWRATE_MAX_RATE_12_0 (0xB0) +#define MPI26_SAS_HWRATE_MAX_RATE_22_5 (0xC0) #define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F) #define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08) #define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09) #define MPI2_SAS_HWRATE_MIN_RATE_6_0 (0x0A) #define MPI25_SAS_HWRATE_MIN_RATE_12_0 (0x0B) +#define MPI26_SAS_HWRATE_MIN_RATE_22_5 (0x0C) @@ -2240,11 +2328,13 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 { #define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90) #define MPI2_SASIOUNIT1_MAX_RATE_6_0 (0xA0) #define MPI25_SASIOUNIT1_MAX_RATE_12_0 (0xB0) +#define MPI26_SASIOUNIT1_MAX_RATE_22_5 (0xC0) #define MPI2_SASIOUNIT1_MIN_RATE_MASK (0x0F) #define MPI2_SASIOUNIT1_MIN_RATE_1_5 (0x08) #define MPI2_SASIOUNIT1_MIN_RATE_3_0 (0x09) #define MPI2_SASIOUNIT1_MIN_RATE_6_0 (0x0A) #define MPI25_SASIOUNIT1_MIN_RATE_12_0 (0x0B) +#define MPI26_SASIOUNIT1_MIN_RATE_22_5 (0x0C) /*see mpi2_sas.h for values for *SAS IO Unit Page 1 ControllerPhyDeviceInfo values */ @@ -3158,37 +3248,29 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0 { /*SAS Enclosure Page 0 */ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 { - MPI2_CONFIG_EXTENDED_PAGE_HEADER - Header; /*0x00 */ - U32 - Reserved1; /*0x08 */ - U64 - EnclosureLogicalID; /*0x0C */ - U16 - Flags; /*0x14 */ - U16 - EnclosureHandle; /*0x16 */ - U16 - NumSlots; /*0x18 */ - U16 - StartSlot; /*0x1A */ - U8 - Reserved2; /*0x1C */ - U8 - EnclosureLevel; /*0x1D */ - U16 - SEPDevHandle; /*0x1E */ - U32 - Reserved3; /*0x20 */ - U32 - Reserved4; /*0x24 */ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x08 */ + U64 EnclosureLogicalID; /*0x0C */ + U16 Flags; /*0x14 */ + U16 EnclosureHandle; /*0x16 */ + U16 NumSlots; /*0x18 */ + U16 StartSlot; /*0x1A */ + U8 ChassisSlot; /*0x1C */ + U8 EnclosureLeve; /*0x1D */ + U16 SEPDevHandle; /*0x1E */ + U32 Reserved3; /*0x20 */ + U32 Reserved4; /*0x24 */ } MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, *PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, - Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t; + Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t, + MPI26_CONFIG_PAGE_ENCLOSURE_0, + *PTR_MPI26_CONFIG_PAGE_ENCLOSURE_0, + Mpi26EnclosurePage0_t, *pMpi26EnclosurePage0_t; #define MPI2_SASENCLOSURE0_PAGEVERSION (0x04) /*values for SAS Enclosure Page 0 Flags field */ +#define MPI2_SAS_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020) #define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010) #define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F) #define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000) @@ -3198,6 +3280,18 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 { #define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004) #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005) +#define MPI26_ENCLOSURE0_PAGEVERSION (0x04) + +/*Values for Enclosure Page 0 Flags field */ +#define MPI26_ENCLS0_FLAGS_CHASSIS_SLOT_VALID (0x0020) +#define MPI26_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010) +#define MPI26_ENCLS0_FLAGS_MNG_MASK (0x000F) +#define MPI26_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000) +#define MPI26_ENCLS0_FLAGS_MNG_IOC_SES (0x0001) +#define MPI26_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002) +#define MPI26_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003) +#define MPI26_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004) +#define MPI26_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005) /**************************************************************************** * Log Config Page @@ -3497,4 +3591,422 @@ typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS { /*PageVersion should be provided by product-specific code */ + + +/**************************************************************************** +* values for fields used by several types of PCIe Config Pages +****************************************************************************/ + +/*values for NegotiatedLinkRates fields */ +#define MPI26_PCIE_NEG_LINK_RATE_MASK_PHYSICAL (0x0F) +/*link rates used for Negotiated Physical Link Rate */ +#define MPI26_PCIE_NEG_LINK_RATE_UNKNOWN (0x00) +#define MPI26_PCIE_NEG_LINK_RATE_PHY_DISABLED (0x01) +#define MPI26_PCIE_NEG_LINK_RATE_2_5 (0x02) +#define MPI26_PCIE_NEG_LINK_RATE_5_0 (0x03) +#define MPI26_PCIE_NEG_LINK_RATE_8_0 (0x04) +#define MPI26_PCIE_NEG_LINK_RATE_16_0 (0x05) + + +/**************************************************************************** +* PCIe IO Unit Config Pages (MPI v2.6 and later) +****************************************************************************/ + +/*PCIe IO Unit Page 0 */ + +typedef struct _MPI26_PCIE_IO_UNIT0_PHY_DATA { + U8 Link; /*0x00 */ + U8 LinkFlags; /*0x01 */ + U8 PhyFlags; /*0x02 */ + U8 NegotiatedLinkRate; /*0x03 */ + U32 ControllerPhyDeviceInfo;/*0x04 */ + U16 AttachedDevHandle; /*0x08 */ + U16 ControllerDevHandle; /*0x0A */ + U32 EnumerationStatus; /*0x0C */ + U32 Reserved1; /*0x10 */ +} MPI26_PCIE_IO_UNIT0_PHY_DATA, + *PTR_MPI26_PCIE_IO_UNIT0_PHY_DATA, + Mpi26PCIeIOUnit0PhyData_t, *pMpi26PCIeIOUnit0PhyData_t; + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhys at runtime. + */ +#ifndef MPI26_PCIE_IOUNIT0_PHY_MAX +#define MPI26_PCIE_IOUNIT0_PHY_MAX (1) +#endif + +typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U32 Reserved1; /*0x08 */ + U8 NumPhys; /*0x0C */ + U8 InitStatus; /*0x0D */ + U16 Reserved3; /*0x0E */ + MPI26_PCIE_IO_UNIT0_PHY_DATA + PhyData[MPI26_PCIE_IOUNIT0_PHY_MAX]; /*0x10 */ +} MPI26_CONFIG_PAGE_PIOUNIT_0, + *PTR_MPI26_CONFIG_PAGE_PIOUNIT_0, + Mpi26PCIeIOUnitPage0_t, *pMpi26PCIeIOUnitPage0_t; + +#define MPI26_PCIEIOUNITPAGE0_PAGEVERSION (0x00) + +/*values for PCIe IO Unit Page 0 LinkFlags */ +#define MPI26_PCIEIOUNIT0_LINKFLAGS_ENUMERATION_IN_PROGRESS (0x08) + +/*values for PCIe IO Unit Page 0 PhyFlags */ +#define MPI26_PCIEIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08) + +/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + +/*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo + *values + */ + +/*values for PCIe IO Unit Page 0 EnumerationStatus */ +#define MPI26_PCIEIOUNIT0_ES_MAX_SWITCHES_EXCEEDED (0x40000000) +#define MPI26_PCIEIOUNIT0_ES_MAX_DEVICES_EXCEEDED (0x20000000) + + +/*PCIe IO Unit Page 1 */ + +typedef struct _MPI26_PCIE_IO_UNIT1_PHY_DATA { + U8 Link; /*0x00 */ + U8 LinkFlags; /*0x01 */ + U8 PhyFlags; /*0x02 */ + U8 MaxMinLinkRate; /*0x03 */ + U32 ControllerPhyDeviceInfo; /*0x04 */ + U32 Reserved1; /*0x08 */ +} MPI26_PCIE_IO_UNIT1_PHY_DATA, + *PTR_MPI26_PCIE_IO_UNIT1_PHY_DATA, + Mpi26PCIeIOUnit1PhyData_t, *pMpi26PCIeIOUnit1PhyData_t; + +/*values for LinkFlags */ +#define MPI26_PCIEIOUNIT1_LINKFLAGS_DIS_SRIS (0x00) +#define MPI26_PCIEIOUNIT1_LINKFLAGS_EN_SRIS (0x01) + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumPhys at runtime. + */ +#ifndef MPI26_PCIE_IOUNIT1_PHY_MAX +#define MPI26_PCIE_IOUNIT1_PHY_MAX (1) +#endif + +typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U16 ControlFlags; /*0x08 */ + U16 Reserved; /*0x0A */ + U16 AdditionalControlFlags; /*0x0C */ + U16 NVMeMaxQueueDepth; /*0x0E */ + U8 NumPhys; /*0x10 */ + U8 Reserved1; /*0x11 */ + U16 Reserved2; /*0x12 */ + MPI26_PCIE_IO_UNIT1_PHY_DATA + PhyData[MPI26_PCIE_IOUNIT1_PHY_MAX];/*0x14 */ +} MPI26_CONFIG_PAGE_PIOUNIT_1, + *PTR_MPI26_CONFIG_PAGE_PIOUNIT_1, + Mpi26PCIeIOUnitPage1_t, *pMpi26PCIeIOUnitPage1_t; + +#define MPI26_PCIEIOUNITPAGE1_PAGEVERSION (0x00) + +/*values for PCIe IO Unit Page 1 PhyFlags */ +#define MPI26_PCIEIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) +#define MPI26_PCIEIOUNIT1_PHYFLAGS_ENDPOINT_ONLY (0x01) + +/*values for PCIe IO Unit Page 1 MaxMinLinkRate */ +#define MPI26_PCIEIOUNIT1_MAX_RATE_MASK (0xF0) +#define MPI26_PCIEIOUNIT1_MAX_RATE_SHIFT (4) +#define MPI26_PCIEIOUNIT1_MAX_RATE_2_5 (0x20) +#define MPI26_PCIEIOUNIT1_MAX_RATE_5_0 (0x30) +#define MPI26_PCIEIOUNIT1_MAX_RATE_8_0 (0x40) +#define MPI26_PCIEIOUNIT1_MAX_RATE_16_0 (0x50) + +/*see mpi2_pci.h for values for PCIe IO Unit Page 0 ControllerPhyDeviceInfo + *values + */ + + +/**************************************************************************** +* PCIe Switch Config Pages (MPI v2.6 and later) +****************************************************************************/ + +/*PCIe Switch Page 0 */ + +typedef struct _MPI26_CONFIG_PAGE_PSWITCH_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 PhysicalPort; /*0x08 */ + U8 Reserved1; /*0x09 */ + U16 Reserved2; /*0x0A */ + U16 DevHandle; /*0x0C */ + U16 ParentDevHandle; /*0x0E */ + U8 NumPorts; /*0x10 */ + U8 PCIeLevel; /*0x11 */ + U16 Reserved3; /*0x12 */ + U32 Reserved4; /*0x14 */ + U32 Reserved5; /*0x18 */ + U32 Reserved6; /*0x1C */ +} MPI26_CONFIG_PAGE_PSWITCH_0, *PTR_MPI26_CONFIG_PAGE_PSWITCH_0, + Mpi26PCIeSwitchPage0_t, *pMpi26PCIeSwitchPage0_t; + +#define MPI26_PCIESWITCH0_PAGEVERSION (0x00) + + +/*PCIe Switch Page 1 */ + +typedef struct _MPI26_CONFIG_PAGE_PSWITCH_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 PhysicalPort; /*0x08 */ + U8 Reserved1; /*0x09 */ + U16 Reserved2; /*0x0A */ + U8 NumPorts; /*0x0C */ + U8 PortNum; /*0x0D */ + U16 AttachedDevHandle; /*0x0E */ + U16 SwitchDevHandle; /*0x10 */ + U8 NegotiatedPortWidth; /*0x12 */ + U8 NegotiatedLinkRate; /*0x13 */ + U32 Reserved4; /*0x14 */ + U32 Reserved5; /*0x18 */ +} MPI26_CONFIG_PAGE_PSWITCH_1, *PTR_MPI26_CONFIG_PAGE_PSWITCH_1, + Mpi26PCIeSwitchPage1_t, *pMpi26PCIeSwitchPage1_t; + +#define MPI26_PCIESWITCH1_PAGEVERSION (0x00) + +/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + + +/**************************************************************************** +* PCIe Device Config Pages (MPI v2.6 and later) +****************************************************************************/ + +/*PCIe Device Page 0 */ + +typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_0 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U16 Slot; /*0x08 */ + U16 EnclosureHandle; /*0x0A */ + U64 WWID; /*0x0C */ + U16 ParentDevHandle; /*0x14 */ + U8 PortNum; /*0x16 */ + U8 AccessStatus; /*0x17 */ + U16 DevHandle; /*0x18 */ + U8 PhysicalPort; /*0x1A */ + U8 Reserved1; /*0x1B */ + U32 DeviceInfo; /*0x1C */ + U32 Flags; /*0x20 */ + U8 SupportedLinkRates; /*0x24 */ + U8 MaxPortWidth; /*0x25 */ + U8 NegotiatedPortWidth; /*0x26 */ + U8 NegotiatedLinkRate; /*0x27 */ + U8 EnclosureLevel; /*0x28 */ + U8 Reserved2; /*0x29 */ + U16 Reserved3; /*0x2A */ + U8 ConnectorName[4]; /*0x2C */ + U32 Reserved4; /*0x30 */ + U32 Reserved5; /*0x34 */ +} MPI26_CONFIG_PAGE_PCIEDEV_0, *PTR_MPI26_CONFIG_PAGE_PCIEDEV_0, + Mpi26PCIeDevicePage0_t, *pMpi26PCIeDevicePage0_t; + +#define MPI26_PCIEDEVICE0_PAGEVERSION (0x01) + +/*values for PCIe Device Page 0 AccessStatus field */ +#define MPI26_PCIEDEV0_ASTATUS_NO_ERRORS (0x00) +#define MPI26_PCIEDEV0_ASTATUS_NEEDS_INITIALIZATION (0x04) +#define MPI26_PCIEDEV0_ASTATUS_CAPABILITY_FAILED (0x02) +#define MPI26_PCIEDEV0_ASTATUS_DEVICE_BLOCKED (0x07) +#define MPI26_PCIEDEV0_ASTATUS_MEMORY_SPACE_ACCESS_FAILED (0x08) +#define MPI26_PCIEDEV0_ASTATUS_UNSUPPORTED_DEVICE (0x09) +#define MPI26_PCIEDEV0_ASTATUS_MSIX_REQUIRED (0x0A) +#define MPI26_PCIEDEV0_ASTATUS_UNKNOWN (0x10) + +#define MPI26_PCIEDEV0_ASTATUS_NVME_READY_TIMEOUT (0x30) +#define MPI26_PCIEDEV0_ASTATUS_NVME_DEVCFG_UNSUPPORTED (0x31) +#define MPI26_PCIEDEV0_ASTATUS_NVME_IDENTIFY_FAILED (0x32) +#define MPI26_PCIEDEV0_ASTATUS_NVME_QCONFIG_FAILED (0x33) +#define MPI26_PCIEDEV0_ASTATUS_NVME_QCREATION_FAILED (0x34) +#define MPI26_PCIEDEV0_ASTATUS_NVME_EVENTCFG_FAILED (0x35) +#define MPI26_PCIEDEV0_ASTATUS_NVME_GET_FEATURE_STAT_FAILED (0x36) +#define MPI26_PCIEDEV0_ASTATUS_NVME_IDLE_TIMEOUT (0x37) +#define MPI26_PCIEDEV0_ASTATUS_NVME_FAILURE_STATUS (0x38) + +#define MPI26_PCIEDEV0_ASTATUS_INIT_FAIL_MAX (0x3F) + +/*see mpi2_pci.h for the MPI26_PCIE_DEVINFO_ defines used for the DeviceInfo + *field + */ + +/*values for PCIe Device Page 0 Flags field */ +#define MPI26_PCIEDEV0_FLAGS_UNAUTHORIZED_DEVICE (0x8000) +#define MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH (0x4000) +#define MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE (0x2000) +#define MPI26_PCIEDEV0_FLAGS_ASYNCHRONOUS_NOTIFICATION (0x0400) +#define MPI26_PCIEDEV0_FLAGS_ATA_SW_PRESERVATION (0x0200) +#define MPI26_PCIEDEV0_FLAGS_UNSUPPORTED_DEVICE (0x0100) +#define MPI26_PCIEDEV0_FLAGS_ATA_48BIT_LBA_SUPPORTED (0x0080) +#define MPI26_PCIEDEV0_FLAGS_ATA_SMART_SUPPORTED (0x0040) +#define MPI26_PCIEDEV0_FLAGS_ATA_NCQ_SUPPORTED (0x0020) +#define MPI26_PCIEDEV0_FLAGS_ATA_FUA_SUPPORTED (0x0010) +#define MPI26_PCIEDEV0_FLAGS_ENCL_LEVEL_VALID (0x0002) +#define MPI26_PCIEDEV0_FLAGS_DEVICE_PRESENT (0x0001) + +/* values for PCIe Device Page 0 SupportedLinkRates field */ +#define MPI26_PCIEDEV0_LINK_RATE_16_0_SUPPORTED (0x08) +#define MPI26_PCIEDEV0_LINK_RATE_8_0_SUPPORTED (0x04) +#define MPI26_PCIEDEV0_LINK_RATE_5_0_SUPPORTED (0x02) +#define MPI26_PCIEDEV0_LINK_RATE_2_5_SUPPORTED (0x01) + +/*use MPI26_PCIE_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + + +/*PCIe Device Page 2 */ + +typedef struct _MPI26_CONFIG_PAGE_PCIEDEV_2 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U16 DevHandle; /*0x08 */ + U16 Reserved1; /*0x0A */ + U32 MaximumDataTransferSize;/*0x0C */ + U32 Capabilities; /*0x10 */ + U32 Reserved2; /*0x14 */ +} MPI26_CONFIG_PAGE_PCIEDEV_2, *PTR_MPI26_CONFIG_PAGE_PCIEDEV_2, + Mpi26PCIeDevicePage2_t, *pMpi26PCIeDevicePage2_t; + +#define MPI26_PCIEDEVICE2_PAGEVERSION (0x00) + +/*defines for PCIe Device Page 2 Capabilities field */ +#define MPI26_PCIEDEV2_CAP_SGL_FORMAT (0x00000004) +#define MPI26_PCIEDEV2_CAP_BIT_BUCKET_SUPPORT (0x00000002) +#define MPI26_PCIEDEV2_CAP_SGL_SUPPORT (0x00000001) + + +/**************************************************************************** +* PCIe Link Config Pages (MPI v2.6 and later) +****************************************************************************/ + +/*PCIe Link Page 1 */ + +typedef struct _MPI26_CONFIG_PAGE_PCIELINK_1 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 Link; /*0x08 */ + U8 Reserved1; /*0x09 */ + U16 Reserved2; /*0x0A */ + U32 CorrectableErrorCount; /*0x0C */ + U16 NonFatalErrorCount; /*0x10 */ + U16 Reserved3; /*0x12 */ + U16 FatalErrorCount; /*0x14 */ + U16 Reserved4; /*0x16 */ +} MPI26_CONFIG_PAGE_PCIELINK_1, *PTR_MPI26_CONFIG_PAGE_PCIELINK_1, + Mpi26PcieLinkPage1_t, *pMpi26PcieLinkPage1_t; + +#define MPI26_PCIELINK1_PAGEVERSION (0x00) + +/*PCIe Link Page 2 */ + +typedef struct _MPI26_PCIELINK2_LINK_EVENT { + U8 LinkEventCode; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U32 LinkEventInfo; /*0x04 */ +} MPI26_PCIELINK2_LINK_EVENT, *PTR_MPI26_PCIELINK2_LINK_EVENT, + Mpi26PcieLink2LinkEvent_t, *pMpi26PcieLink2LinkEvent_t; + +/*use MPI26_PCIELINK3_EVTCODE_ for the LinkEventCode field */ + + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumLinkEvents at runtime. + */ +#ifndef MPI26_PCIELINK2_LINK_EVENT_MAX +#define MPI26_PCIELINK2_LINK_EVENT_MAX (1) +#endif + +typedef struct _MPI26_CONFIG_PAGE_PCIELINK_2 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 Link; /*0x08 */ + U8 Reserved1; /*0x09 */ + U16 Reserved2; /*0x0A */ + U8 NumLinkEvents; /*0x0C */ + U8 Reserved3; /*0x0D */ + U16 Reserved4; /*0x0E */ + MPI26_PCIELINK2_LINK_EVENT + LinkEvent[MPI26_PCIELINK2_LINK_EVENT_MAX]; /*0x10 */ +} MPI26_CONFIG_PAGE_PCIELINK_2, *PTR_MPI26_CONFIG_PAGE_PCIELINK_2, + Mpi26PcieLinkPage2_t, *pMpi26PcieLinkPage2_t; + +#define MPI26_PCIELINK2_PAGEVERSION (0x00) + +/*PCIe Link Page 3 */ + +typedef struct _MPI26_PCIELINK3_LINK_EVENT_CONFIG { + U8 LinkEventCode; /*0x00 */ + U8 Reserved1; /*0x01 */ + U16 Reserved2; /*0x02 */ + U8 CounterType; /*0x04 */ + U8 ThresholdWindow; /*0x05 */ + U8 TimeUnits; /*0x06 */ + U8 Reserved3; /*0x07 */ + U32 EventThreshold; /*0x08 */ + U16 ThresholdFlags; /*0x0C */ + U16 Reserved4; /*0x0E */ +} MPI26_PCIELINK3_LINK_EVENT_CONFIG, *PTR_MPI26_PCIELINK3_LINK_EVENT_CONFIG, + Mpi26PcieLink3LinkEventConfig_t, *pMpi26PcieLink3LinkEventConfig_t; + +/*values for LinkEventCode field */ +#define MPI26_PCIELINK3_EVTCODE_NO_EVENT (0x00) +#define MPI26_PCIELINK3_EVTCODE_CORRECTABLE_ERROR_RECEIVED (0x01) +#define MPI26_PCIELINK3_EVTCODE_NON_FATAL_ERROR_RECEIVED (0x02) +#define MPI26_PCIELINK3_EVTCODE_FATAL_ERROR_RECEIVED (0x03) +#define MPI26_PCIELINK3_EVTCODE_DATA_LINK_ERROR_DETECTED (0x04) +#define MPI26_PCIELINK3_EVTCODE_TRANSACTION_LAYER_ERROR_DETECTED (0x05) +#define MPI26_PCIELINK3_EVTCODE_TLP_ECRC_ERROR_DETECTED (0x06) +#define MPI26_PCIELINK3_EVTCODE_POISONED_TLP (0x07) +#define MPI26_PCIELINK3_EVTCODE_RECEIVED_NAK_DLLP (0x08) +#define MPI26_PCIELINK3_EVTCODE_SENT_NAK_DLLP (0x09) +#define MPI26_PCIELINK3_EVTCODE_LTSSM_RECOVERY_STATE (0x0A) +#define MPI26_PCIELINK3_EVTCODE_LTSSM_RXL0S_STATE (0x0B) +#define MPI26_PCIELINK3_EVTCODE_LTSSM_TXL0S_STATE (0x0C) +#define MPI26_PCIELINK3_EVTCODE_LTSSM_L1_STATE (0x0D) +#define MPI26_PCIELINK3_EVTCODE_LTSSM_DISABLED_STATE (0x0E) +#define MPI26_PCIELINK3_EVTCODE_LTSSM_HOT_RESET_STATE (0x0F) +#define MPI26_PCIELINK3_EVTCODE_SYSTEM_ERROR (0x10) +#define MPI26_PCIELINK3_EVTCODE_DECODE_ERROR (0x11) +#define MPI26_PCIELINK3_EVTCODE_DISPARITY_ERROR (0x12) + +/*values for the CounterType field */ +#define MPI26_PCIELINK3_COUNTER_TYPE_WRAPPING (0x00) +#define MPI26_PCIELINK3_COUNTER_TYPE_SATURATING (0x01) +#define MPI26_PCIELINK3_COUNTER_TYPE_PEAK_VALUE (0x02) + +/*values for the TimeUnits field */ +#define MPI26_PCIELINK3_TM_UNITS_10_MICROSECONDS (0x00) +#define MPI26_PCIELINK3_TM_UNITS_100_MICROSECONDS (0x01) +#define MPI26_PCIELINK3_TM_UNITS_1_MILLISECOND (0x02) +#define MPI26_PCIELINK3_TM_UNITS_10_MILLISECONDS (0x03) + +/*values for the ThresholdFlags field */ +#define MPI26_PCIELINK3_TFLAGS_EVENT_NOTIFY (0x0001) + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check the value returned for NumLinkEvents at runtime. + */ +#ifndef MPI26_PCIELINK3_LINK_EVENT_MAX +#define MPI26_PCIELINK3_LINK_EVENT_MAX (1) +#endif + +typedef struct _MPI26_CONFIG_PAGE_PCIELINK_3 { + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ + U8 Link; /*0x08 */ + U8 Reserved1; /*0x09 */ + U16 Reserved2; /*0x0A */ + U8 NumLinkEvents; /*0x0C */ + U8 Reserved3; /*0x0D */ + U16 Reserved4; /*0x0E */ + MPI26_PCIELINK3_LINK_EVENT_CONFIG + LinkEventConfig[MPI26_PCIELINK3_LINK_EVENT_MAX]; /*0x10 */ +} MPI26_CONFIG_PAGE_PCIELINK_3, *PTR_MPI26_CONFIG_PAGE_PCIELINK_3, + Mpi26PcieLinkPage3_t, *pMpi26PcieLinkPage3_t; + +#define MPI26_PCIELINK3_PAGEVERSION (0x00) + + #endif diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_init.h b/drivers/scsi/mpt3sas/mpi/mpi2_init.h index bba56b6..7597c24 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_init.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_init.h @@ -6,7 +6,7 @@ * Title: MPI SCSI initiator mode messages and structures * Creation Date: June 23, 2006 * - * mpi2_init.h Version: 02.00.20 + * mpi2_init.h Version: 02.00.21 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used @@ -54,6 +54,8 @@ * 08-26-15 02.00.18 Added SCSITASKMGMT_MSGFLAGS for Target Reset. * 12-18-15 02.00.19 Added EEDPObservedValue added to SCSI IO Reply message. * 01-04-16 02.00.20 Modified EEDP reported values in SCSI IO Reply message. + * 01-21-16 02.00.21 Modified MPI26_SCSITASKMGMT_MSGFLAGS_PCIE* defines to + * be unique within first 32 characters. * -------------------------------------------------------------------------- */ @@ -373,6 +375,11 @@ typedef struct _MPI2_SCSI_IO_REPLY { } MPI2_SCSI_IO_REPLY, *PTR_MPI2_SCSI_IO_REPLY, Mpi2SCSIIOReply_t, *pMpi2SCSIIOReply_t; +/*SCSI IO Reply MsgFlags bits */ +#define MPI26_SCSIIO_REPLY_MSGFLAGS_REFTAG_OBSERVED_VALID (0x01) +#define MPI26_SCSIIO_REPLY_MSGFLAGS_GUARD_OBSERVED_VALID (0x02) +#define MPI26_SCSIIO_REPLY_MSGFLAGS_APPTAG_OBSERVED_VALID (0x04) + /*SCSI IO Reply SCSIStatus values (SAM-4 status codes) */ #define MPI2_SCSI_STATUS_GOOD (0x00) @@ -446,11 +453,13 @@ typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST { /*MsgFlags bits */ #define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18) +#define MPI26_SCSITASKMGMT_MSGFLAGS_HOT_RESET_PCIE (0x00) #define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00) #define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08) #define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10) #define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01) +#define MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE (0x18) /*SCSI Task Management Reply Message */ typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY { diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h index af4be40..74d6827 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h @@ -6,7 +6,7 @@ * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: October 11, 2006 * - * mpi2_ioc.h Version: 02.00.27 + * mpi2_ioc.h Version: 02.00.32 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used @@ -140,7 +140,32 @@ * Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and * MPI26_FW_HEADER_PID_FAMILY_3516_SAS. * Added MPI26_CTRL_OP_SHUTDOWN. - * 08-25-15 02.00.27 Added IC ARCH Class based signature defines + * 08-25-15 02.00.27 Added IC ARCH Class based signature defines. + * Added MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED event. + * Added ConigurationFlags field to IOCInit message to + * support NVMe SGL format control. + * Added PCIe SRIOV support. + * 02-17-16 02.00.28 Added SAS 4 22.5 gbs speed support. + * Added PCIe 4 16.0 GT/sec speec support. + * Removed AHCI support. + * Removed SOP support. + * 07-01-16 02.00.29 Added Archclass for 4008 product. + * Added IOCException MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED + * 08-23-16 02.00.30 Added new defines for the ImageType field of FWDownload + * Request Message. + * Added new defines for the ImageType field of FWUpload + * Request Message. + * Added new values for the RegionType field in the Layout + * Data sections of the FLASH Layout Extended Image Data. + * Added new defines for the ReasonCode field of + * Active Cable Exception Event. + * Added MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE and + * MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE. + * 11-23-16 02.00.31 Added MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR and + * MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR. + * 02-02-17 02.00.32 Added MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP. + * Added MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT and related + * defines for the ReasonCode field. * -------------------------------------------------------------------------- */ @@ -212,6 +237,9 @@ typedef struct _MPI2_IOC_INIT_REQUEST { #define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF) #define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0) +/*ConfigurationFlags */ +#define MPI26_IOCINIT_CFGFLAGS_NVME_SGL_FORMAT (0x0001) + /*minimum depth for a Reply Descriptor Post Queue */ #define MPI2_RDPQ_DEPTH_MIN (16) @@ -299,6 +327,10 @@ typedef struct _MPI2_IOC_FACTS_REPLY { U16 MinDevHandle; /*0x3C */ U8 CurrentHostPageSize; /* 0x3E */ U8 Reserved4; /* 0x3F */ + U8 SGEModifierMask; /*0x40 */ + U8 SGEModifierValue; /*0x41 */ + U8 SGEModifierShift; /*0x42 */ + U8 Reserved5; /*0x43 */ } MPI2_IOC_FACTS_REPLY, *PTR_MPI2_IOC_FACTS_REPLY, Mpi2IOCFactsReply_t, *pMpi2IOCFactsReply_t; @@ -315,6 +347,7 @@ typedef struct _MPI2_IOC_FACTS_REPLY { #define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0) /*IOCExceptions */ +#define MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED (0x0400) #define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200) #define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100) @@ -335,6 +368,7 @@ typedef struct _MPI2_IOC_FACTS_REPLY { /*ProductID field uses MPI2_FW_HEADER_PID_ */ /*IOCCapabilities */ +#define MPI26_IOCFACTS_CAPABILITY_PCIE_SRIOV (0x00100000) #define MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ (0x00080000) #define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE (0x00040000) #define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE (0x00020000) @@ -353,6 +387,7 @@ typedef struct _MPI2_IOC_FACTS_REPLY { #define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004) /*ProtocolFlags */ +#define MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES (0x0008) #define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002) #define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001) @@ -402,6 +437,8 @@ typedef struct _MPI2_PORT_FACTS_REPLY { #define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20) #define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30) #define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31) +#define MPI2_PORTFACTS_PORTTYPE_TRI_MODE (0x40) + /**************************************************************************** * PortEnable message @@ -508,6 +545,7 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY { #define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019) #define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C) #define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D) +#define MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE (0x001D) #define MPI2_EVENT_IR_VOLUME (0x001E) #define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F) #define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020) @@ -520,7 +558,12 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY { #define MPI2_EVENT_TEMP_THRESHOLD (0x0027) #define MPI2_EVENT_HOST_MESSAGE (0x0028) #define MPI2_EVENT_POWER_PERFORMANCE_CHANGE (0x0029) +#define MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE (0x0030) +#define MPI2_EVENT_PCIE_ENUMERATION (0x0031) +#define MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST (0x0032) +#define MPI2_EVENT_PCIE_LINK_COUNTER (0x0033) #define MPI2_EVENT_ACTIVE_CABLE_EXCEPTION (0x0034) +#define MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR (0x0035) #define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E) #define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F) @@ -617,11 +660,20 @@ typedef struct _MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT { U8 ReasonCode; /* 0x04 */ U8 ReceptacleID; /* 0x05 */ U16 Reserved1; /* 0x06 */ -} MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT, +} MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT, + *PTR_MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT, + Mpi25EventDataActiveCableExcept_t, + *pMpi25EventDataActiveCableExcept_t, + MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT, *PTR_MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT, Mpi26EventDataActiveCableExcept_t, *pMpi26EventDataActiveCableExcept_t; +/*MPI2.5 defines for the ReasonCode field */ +#define MPI25_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00) +#define MPI25_EVENT_ACTIVE_CABLE_PRESENT (0x01) +#define MPI25_EVENT_ACTIVE_CABLE_DEGRADED (0x02) + /* defines for ReasonCode field */ #define MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00) #define MPI26_EVENT_ACTIVE_CABLE_PRESENT (0x01) @@ -957,6 +1009,7 @@ typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST { #define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09) #define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A) #define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B) +#define MPI26_EVENT_SAS_TOPO_LR_RATE_22_5 (0x0C) /*values for the PhyStatus field */ #define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80) @@ -982,12 +1035,37 @@ typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE { } MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, *PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, Mpi2EventDataSasEnclDevStatusChange_t, - *pMpi2EventDataSasEnclDevStatusChange_t; + *pMpi2EventDataSasEnclDevStatusChange_t, + MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE, + *PTR_MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE, + Mpi26EventDataEnclDevStatusChange_t, + *pMpi26EventDataEnclDevStatusChange_t; /*SAS Enclosure Device Status Change event ReasonCode values */ #define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01) #define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02) +/*Enclosure Device Status Change event ReasonCode values */ +#define MPI26_EVENT_ENCL_RC_ADDED (0x01) +#define MPI26_EVENT_ENCL_RC_NOT_RESPONDING (0x02) + + +typedef struct _MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR { + U16 DevHandle; /*0x00 */ + U8 ReasonCode; /*0x02 */ + U8 PhysicalPort; /*0x03 */ + U32 Reserved1[2]; /*0x04 */ + U64 SASAddress; /*0x0C */ + U32 Reserved2[2]; /*0x14 */ +} MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR, + *PTR_MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR, + Mpi25EventDataSasDeviceDiscoveryError_t, + *pMpi25EventDataSasDeviceDiscoveryError_t; + +/*SAS Device Discovery Error Event data ReasonCode values */ +#define MPI25_EVENT_SAS_DISC_ERR_SMP_FAILED (0x01) +#define MPI25_EVENT_SAS_DISC_ERR_SMP_TIMEOUT (0x02) + /*SAS PHY Counter Event data */ typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER { @@ -1073,6 +1151,174 @@ typedef struct _MPI2_EVENT_DATA_HBD_PHY { /*values for the DescriptorType field */ #define MPI2_EVENT_HBD_DT_SAS (0x01) + +/*PCIe Device Status Change Event data (MPI v2.6 and later) */ + +typedef struct _MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE { + U16 TaskTag; /*0x00 */ + U8 ReasonCode; /*0x02 */ + U8 PhysicalPort; /*0x03 */ + U8 ASC; /*0x04 */ + U8 ASCQ; /*0x05 */ + U16 DevHandle; /*0x06 */ + U32 Reserved2; /*0x08 */ + U64 WWID; /*0x0C */ + U8 LUN[8]; /*0x14 */ +} MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE, + *PTR_MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE, + Mpi26EventDataPCIeDeviceStatusChange_t, + *pMpi26EventDataPCIeDeviceStatusChange_t; + +/*PCIe Device Status Change Event data ReasonCode values */ +#define MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA (0x05) +#define MPI26_EVENT_PCIDEV_STAT_RC_UNSUPPORTED (0x07) +#define MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) +#define MPI26_EVENT_PCIDEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) +#define MPI26_EVENT_PCIDEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) +#define MPI26_EVENT_PCIDEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) +#define MPI26_EVENT_PCIDEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) +#define MPI26_EVENT_PCIDEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) +#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) +#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) +#define MPI26_EVENT_PCIDEV_STAT_RC_DEV_INIT_FAILURE (0x10) + + +/*PCIe Enumeration Event data (MPI v2.6 and later) */ + +typedef struct _MPI26_EVENT_DATA_PCIE_ENUMERATION { + U8 Flags; /*0x00 */ + U8 ReasonCode; /*0x01 */ + U8 PhysicalPort; /*0x02 */ + U8 Reserved1; /*0x03 */ + U32 EnumerationStatus; /*0x04 */ +} MPI26_EVENT_DATA_PCIE_ENUMERATION, + *PTR_MPI26_EVENT_DATA_PCIE_ENUMERATION, + Mpi26EventDataPCIeEnumeration_t, + *pMpi26EventDataPCIeEnumeration_t; + +/*PCIe Enumeration Event data Flags values */ +#define MPI26_EVENT_PCIE_ENUM_DEVICE_CHANGE (0x02) +#define MPI26_EVENT_PCIE_ENUM_IN_PROGRESS (0x01) + +/*PCIe Enumeration Event data ReasonCode values */ +#define MPI26_EVENT_PCIE_ENUM_RC_STARTED (0x01) +#define MPI26_EVENT_PCIE_ENUM_RC_COMPLETED (0x02) + +/*PCIe Enumeration Event data EnumerationStatus values */ +#define MPI26_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED (0x40000000) +#define MPI26_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED (0x20000000) +#define MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED (0x10000000) + + +/*PCIe Topology Change List Event data (MPI v2.6 and later) */ + +/* + *Host code (drivers, BIOS, utilities, etc.) should leave this define set to + *one and check NumEntries at runtime. + */ +#ifndef MPI26_EVENT_PCIE_TOPO_PORT_COUNT +#define MPI26_EVENT_PCIE_TOPO_PORT_COUNT (1) +#endif + +typedef struct _MPI26_EVENT_PCIE_TOPO_PORT_ENTRY { + U16 AttachedDevHandle; /*0x00 */ + U8 PortStatus; /*0x02 */ + U8 Reserved1; /*0x03 */ + U8 CurrentPortInfo; /*0x04 */ + U8 Reserved2; /*0x05 */ + U8 PreviousPortInfo; /*0x06 */ + U8 Reserved3; /*0x07 */ +} MPI26_EVENT_PCIE_TOPO_PORT_ENTRY, + *PTR_MPI26_EVENT_PCIE_TOPO_PORT_ENTRY, + Mpi26EventPCIeTopoPortEntry_t, + *pMpi26EventPCIeTopoPortEntry_t; + +/*PCIe Topology Change List Event data PortStatus values */ +#define MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED (0x01) +#define MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING (0x02) +#define MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED (0x03) +#define MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE (0x04) +#define MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING (0x05) + +/*PCIe Topology Change List Event data defines for CurrentPortInfo and + *PreviousPortInfo + */ +#define MPI26_EVENT_PCIE_TOPO_PI_LANE_MASK (0xF0) +#define MPI26_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN (0x00) +#define MPI26_EVENT_PCIE_TOPO_PI_1_LANE (0x10) +#define MPI26_EVENT_PCIE_TOPO_PI_2_LANES (0x20) +#define MPI26_EVENT_PCIE_TOPO_PI_4_LANES (0x30) +#define MPI26_EVENT_PCIE_TOPO_PI_8_LANES (0x40) + +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0F) +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00) +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_DISABLED (0x01) +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5 (0x02) +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_5_0 (0x03) +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_8_0 (0x04) +#define MPI26_EVENT_PCIE_TOPO_PI_RATE_16_0 (0x05) + +typedef struct _MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST { + U16 EnclosureHandle; /*0x00 */ + U16 SwitchDevHandle; /*0x02 */ + U8 NumPorts; /*0x04 */ + U8 Reserved1; /*0x05 */ + U16 Reserved2; /*0x06 */ + U8 NumEntries; /*0x08 */ + U8 StartPortNum; /*0x09 */ + U8 SwitchStatus; /*0x0A */ + U8 PhysicalPort; /*0x0B */ + MPI26_EVENT_PCIE_TOPO_PORT_ENTRY + PortEntry[MPI26_EVENT_PCIE_TOPO_PORT_COUNT]; /*0x0C */ +} MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, + *PTR_MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, + Mpi26EventDataPCIeTopologyChangeList_t, + *pMpi26EventDataPCIeTopologyChangeList_t; + +/*PCIe Topology Change List Event data SwitchStatus values */ +#define MPI26_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH (0x00) +#define MPI26_EVENT_PCIE_TOPO_SS_ADDED (0x01) +#define MPI26_EVENT_PCIE_TOPO_SS_NOT_RESPONDING (0x02) +#define MPI26_EVENT_PCIE_TOPO_SS_RESPONDING (0x03) +#define MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING (0x04) + +/*PCIe Link Counter Event data (MPI v2.6 and later) */ + +typedef struct _MPI26_EVENT_DATA_PCIE_LINK_COUNTER { + U64 TimeStamp; /*0x00 */ + U32 Reserved1; /*0x08 */ + U8 LinkEventCode; /*0x0C */ + U8 LinkNum; /*0x0D */ + U16 Reserved2; /*0x0E */ + U32 LinkEventInfo; /*0x10 */ + U8 CounterType; /*0x14 */ + U8 ThresholdWindow; /*0x15 */ + U8 TimeUnits; /*0x16 */ + U8 Reserved3; /*0x17 */ + U32 EventThreshold; /*0x18 */ + U16 ThresholdFlags; /*0x1C */ + U16 Reserved4; /*0x1E */ +} MPI26_EVENT_DATA_PCIE_LINK_COUNTER, + *PTR_MPI26_EVENT_DATA_PCIE_LINK_COUNTER, + Mpi26EventDataPcieLinkCounter_t, *pMpi26EventDataPcieLinkCounter_t; + + +/*use MPI26_PCIELINK3_EVTCODE_ values from mpi2_cnfg.h for the LinkEventCode + *field + */ + +/*use MPI26_PCIELINK3_COUNTER_TYPE_ values from mpi2_cnfg.h for the CounterType + *field + */ + +/*use MPI26_PCIELINK3_TIME_UNITS_ values from mpi2_cnfg.h for the TimeUnits + *field + */ + +/*use MPI26_PCIELINK3_TFLAGS_ values from mpi2_cnfg.h for the ThresholdFlags + *field + */ + /**************************************************************************** * EventAck message ****************************************************************************/ @@ -1190,6 +1436,14 @@ typedef struct _MPI2_FW_DOWNLOAD_REQUEST { #define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A) #define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) #define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY (0x0C) +#define MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP (0x0D) +#define MPI2_FW_DOWNLOAD_ITYPE_SBR (0x0E) +#define MPI2_FW_DOWNLOAD_ITYPE_SBR_BACKUP (0x0F) +#define MPI2_FW_DOWNLOAD_ITYPE_HIIM (0x10) +#define MPI2_FW_DOWNLOAD_ITYPE_HIIA (0x11) +#define MPI2_FW_DOWNLOAD_ITYPE_CTLR (0x12) +#define MPI2_FW_DOWNLOAD_ITYPE_IMR_FIRMWARE (0x13) +#define MPI2_FW_DOWNLOAD_ITYPE_MR_NVDATA (0x14) #define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0) /*MPI v2.0 FWDownload TransactionContext Element */ @@ -1276,6 +1530,14 @@ typedef struct _MPI2_FW_UPLOAD_REQUEST { #define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A) #define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) #define MPI2_FW_UPLOAD_ITYPE_CBB_BACKUP (0x0D) +#define MPI2_FW_UPLOAD_ITYPE_SBR (0x0E) +#define MPI2_FW_UPLOAD_ITYPE_SBR_BACKUP (0x0F) +#define MPI2_FW_UPLOAD_ITYPE_HIIM (0x10) +#define MPI2_FW_UPLOAD_ITYPE_HIIA (0x11) +#define MPI2_FW_UPLOAD_ITYPE_CTLR (0x12) +#define MPI2_FW_UPLOAD_ITYPE_IMR_FIRMWARE (0x13) +#define MPI2_FW_UPLOAD_ITYPE_MR_NVDATA (0x14) + /*MPI v2.0 FWUpload TransactionContext Element */ typedef struct _MPI2_FW_UPLOAD_TCSGE { @@ -1394,10 +1656,13 @@ typedef struct _MPI2_FW_IMAGE_HEADER { #define MPI26_FW_HEADER_SIGNATURE0_ARC_1 (0x00) #define MPI26_FW_HEADER_SIGNATURE0_ARC_2 (0x01) /* legacy (0x5AEAA55A) */ +#define MPI26_FW_HEADER_SIGNATURE0_ARC_3 (0x02) #define MPI26_FW_HEADER_SIGNATURE0 \ (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_0) #define MPI26_FW_HEADER_SIGNATURE0_3516 \ (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_1) +#define MPI26_FW_HEADER_SIGNATURE0_4008 \ + (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_3) /*Signature1 field */ #define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08) @@ -1541,6 +1806,13 @@ typedef struct _MPI2_FLASH_LAYOUT_DATA { #define MPI2_FLASH_REGION_COMMON_BOOT_BLOCK (0x0A) #define MPI2_FLASH_REGION_INIT (MPI2_FLASH_REGION_COMMON_BOOT_BLOCK) #define MPI2_FLASH_REGION_CBB_BACKUP (0x0D) +#define MPI2_FLASH_REGION_SBR (0x0E) +#define MPI2_FLASH_REGION_SBR_BACKUP (0x0F) +#define MPI2_FLASH_REGION_HIIM (0x10) +#define MPI2_FLASH_REGION_HIIA (0x11) +#define MPI2_FLASH_REGION_CTLR (0x12) +#define MPI2_FLASH_REGION_IMR_FIRMWARE (0x13) +#define MPI2_FLASH_REGION_MR_NVDATA (0x14) /*ImageRevision */ #define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00) @@ -1825,6 +2097,8 @@ typedef struct _MPI26_IOUNIT_CONTROL_REQUEST { #define MPI26_CTRL_OP_DEV_ENABLE_PERSIST_CONNECTION (0x17) #define MPI26_CTRL_OP_DEV_DISABLE_PERSIST_CONNECTION (0x18) #define MPI26_CTRL_OP_DEV_CLOSE_PERSIST_CONNECTION (0x19) +#define MPI26_CTRL_OP_ENABLE_NVME_SGL_FORMAT (0x1A) +#define MPI26_CTRL_OP_DISABLE_NVME_SGL_FORMAT (0x1B) #define MPI26_CTRL_OP_PRODUCT_SPECIFIC_MIN (0x80) /* values for the PrimFlags field */ diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_pci.h b/drivers/scsi/mpt3sas/mpi/mpi2_pci.h new file mode 100644 index 0000000..a42f4a3 --- /dev/null +++ b/drivers/scsi/mpt3sas/mpi/mpi2_pci.h @@ -0,0 +1,111 @@ +/* + * Copyright 2012-2015 Avago Technologies. All rights reserved. + * + * + * Name: mpi2_pci.h + * Title: MPI PCIe Attached Devices structures and definitions. + * Creation Date: October 9, 2012 + * + * mpi2_pci.h Version: 02.00.02 + * + * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 + * prefix are for use only on MPI v2.5 products, and must not be used + * with MPI v2.0 products. Unless otherwise noted, names beginning with + * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products. + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 03-16-15 02.00.00 Initial version. + * 02-17-16 02.00.01 Removed AHCI support. + * Removed SOP support. + * 07-01-16 02.00.02 Added MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP to + * NVME Encapsulated Request. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_PCI_H +#define MPI2_PCI_H + + +/* + *Values for the PCIe DeviceInfo field used in PCIe Device Status Change Event + *data and PCIe Configuration pages. + */ +#define MPI26_PCIE_DEVINFO_DIRECT_ATTACH (0x00000010) + +#define MPI26_PCIE_DEVINFO_MASK_DEVICE_TYPE (0x0000000F) +#define MPI26_PCIE_DEVINFO_NO_DEVICE (0x00000000) +#define MPI26_PCIE_DEVINFO_PCI_SWITCH (0x00000001) +#define MPI26_PCIE_DEVINFO_NVME (0x00000003) + + +/**************************************************************************** +* NVMe Encapsulated message +****************************************************************************/ + +/*NVME Encapsulated Request Message */ +typedef struct _MPI26_NVME_ENCAPSULATED_REQUEST { + U16 DevHandle; /*0x00 */ + U8 ChainOffset; /*0x02 */ + U8 Function; /*0x03 */ + U16 EncapsulatedCommandLength; /*0x04 */ + U8 Reserved1; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved2; /*0x0A */ + U32 Reserved3; /*0x0C */ + U64 ErrorResponseBaseAddress; /*0x10 */ + U16 ErrorResponseAllocationLength; /*0x18 */ + U16 Flags; /*0x1A */ + U32 DataLength; /*0x1C */ + U8 NVMe_Command[4]; /*0x20 */ + +} MPI26_NVME_ENCAPSULATED_REQUEST, *PTR_MPI26_NVME_ENCAPSULATED_REQUEST, + Mpi26NVMeEncapsulatedRequest_t, *pMpi26NVMeEncapsulatedRequest_t; + +/*defines for the Flags field */ +#define MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP (0x0020) +/*Submission Queue Type*/ +#define MPI26_NVME_FLAGS_SUBMISSIONQ_MASK (0x0010) +#define MPI26_NVME_FLAGS_SUBMISSIONQ_IO (0x0000) +#define MPI26_NVME_FLAGS_SUBMISSIONQ_ADMIN (0x0010) +/*Error Response Address Space */ +#define MPI26_NVME_FLAGS_MASK_ERROR_RSP_ADDR (0x000C) +#define MPI26_NVME_FLAGS_SYSTEM_RSP_ADDR (0x0000) +#define MPI26_NVME_FLAGS_IOCPLB_RSP_ADDR (0x0008) +#define MPI26_NVME_FLAGS_IOCPLBNTA_RSP_ADDR (0x000C) +/*Data Direction*/ +#define MPI26_NVME_FLAGS_DATADIRECTION_MASK (0x0003) +#define MPI26_NVME_FLAGS_NODATATRANSFER (0x0000) +#define MPI26_NVME_FLAGS_WRITE (0x0001) +#define MPI26_NVME_FLAGS_READ (0x0002) +#define MPI26_NVME_FLAGS_BIDIRECTIONAL (0x0003) + + +/*NVMe Encapuslated Reply Message */ +typedef struct _MPI26_NVME_ENCAPSULATED_ERROR_REPLY { + U16 DevHandle; /*0x00 */ + U8 MsgLength; /*0x02 */ + U8 Function; /*0x03 */ + U16 EncapsulatedCommandLength; /*0x04 */ + U8 Reserved1; /*0x06 */ + U8 MsgFlags; /*0x07 */ + U8 VP_ID; /*0x08 */ + U8 VF_ID; /*0x09 */ + U16 Reserved2; /*0x0A */ + U16 Reserved3; /*0x0C */ + U16 IOCStatus; /*0x0E */ + U32 IOCLogInfo; /*0x10 */ + U16 ErrorResponseCount; /*0x14 */ + U16 Reserved4; /*0x16 */ +} MPI26_NVME_ENCAPSULATED_ERROR_REPLY, + *PTR_MPI26_NVME_ENCAPSULATED_ERROR_REPLY, + Mpi26NVMeEncapsulatedErrorReply_t, + *pMpi26NVMeEncapsulatedErrorReply_t; + + +#endif diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h index 5f9289a..4286c91 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h @@ -6,7 +6,7 @@ * Title: MPI diagnostic tool structures and definitions * Creation Date: March 26, 2007 * - * mpi2_tool.h Version: 02.00.13 + * mpi2_tool.h Version: 02.00.14 * * Version History * --------------- @@ -35,6 +35,8 @@ * 08-19-13 02.00.11 Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info. * 01-08-14 02.00.12 Added MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC. * 11-18-14 02.00.13 Updated copyright information. + * 08-25-16 02.00.14 Added new values for the Flags field of Toolbox Clean + * Tool Request Message. * -------------------------------------------------------------------------- */ @@ -105,6 +107,16 @@ typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST { #define MPI2_TOOLBOX_CLEAN_BIT26_PRODUCT_SPECIFIC (0x04000000) #define MPI2_TOOLBOX_CLEAN_MEGARAID (0x02000000) #define MPI2_TOOLBOX_CLEAN_INITIALIZATION (0x01000000) +#define MPI2_TOOLBOX_CLEAN_SBR (0x00800000) +#define MPI2_TOOLBOX_CLEAN_SBR_BACKUP (0x00400000) +#define MPI2_TOOLBOX_CLEAN_HIIM (0x00200000) +#define MPI2_TOOLBOX_CLEAN_HIIA (0x00100000) +#define MPI2_TOOLBOX_CLEAN_CTLR (0x00080000) +#define MPI2_TOOLBOX_CLEAN_IMR_FIRMWARE (0x00040000) +#define MPI2_TOOLBOX_CLEAN_MR_NVDATA (0x00020000) +#define MPI2_TOOLBOX_CLEAN_RESERVED_5_16 (0x0001FFE0) +#define MPI2_TOOLBOX_CLEAN_ALL_BUT_MPB (0x00000010) +#define MPI2_TOOLBOX_CLEAN_ENTIRE_FLASH (0x00000008) #define MPI2_TOOLBOX_CLEAN_FLASH (0x00000004) #define MPI2_TOOLBOX_CLEAN_SEEPROM (0x00000002) #define MPI2_TOOLBOX_CLEAN_NVSRAM (0x00000001)