Message ID | 1525601658-31989-2-git-send-email-alim.akhtar@samsung.com (mailing list archive) |
---|---|
State | Accepted |
Headers | show |
On 2018-05-06 03:14, Alim Akhtar wrote: > In the right behavior, setting the bit to '0' indicates clear and > '1' indicates no change. If host controller handles this the other way, > UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR can be used. > > Signed-off-by: Seungwon Jeon <essuuj@gmail.com> > Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> > --- > drivers/scsi/ufs/ufshcd.c | 21 +++++++++++++++++++-- > drivers/scsi/ufs/ufshcd.h | 5 +++++ > 2 files changed, 24 insertions(+), 2 deletions(-) > > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c > index 00e7905..9898ce5 100644 > --- a/drivers/scsi/ufs/ufshcd.c > +++ b/drivers/scsi/ufs/ufshcd.c > @@ -675,7 +675,24 @@ static inline void ufshcd_put_tm_slot(struct > ufs_hba *hba, int slot) > */ > static inline void ufshcd_utrl_clear(struct ufs_hba *hba, u32 pos) > { > - ufshcd_writel(hba, ~(1 << pos), REG_UTP_TRANSFER_REQ_LIST_CLEAR); > + if (hba->quirks & UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR) > + ufshcd_writel(hba, (1 << pos), REG_UTP_TRANSFER_REQ_LIST_CLEAR); > + else > + ufshcd_writel(hba, ~(1 << pos), > + REG_UTP_TRANSFER_REQ_LIST_CLEAR); > +} > + > +/** > + * ufshcd_utmrl_clear - Clear a bit in UTRMLCLR register > + * @hba: per adapter instance > + * @pos: position of the bit to be cleared > + */ > +static inline void ufshcd_utmrl_clear(struct ufs_hba *hba, u32 pos) > +{ > + if (hba->quirks & UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR) > + ufshcd_writel(hba, (1 << pos), REG_UTP_TASK_REQ_LIST_CLEAR); > + else > + ufshcd_writel(hba, ~(1 << pos), REG_UTP_TASK_REQ_LIST_CLEAR); > } > > /** > @@ -5398,7 +5415,7 @@ static int ufshcd_clear_tm_cmd(struct ufs_hba > *hba, int tag) > goto out; > > spin_lock_irqsave(hba->host->host_lock, flags); > - ufshcd_writel(hba, ~(1 << tag), REG_UTP_TASK_REQ_LIST_CLEAR); > + ufshcd_utmrl_clear(hba, tag); > spin_unlock_irqrestore(hba->host->host_lock, flags); > > /* poll for max. 1 sec to clear door bell register by h/w */ > diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h > index 8110dcd..43035f8 100644 > --- a/drivers/scsi/ufs/ufshcd.h > +++ b/drivers/scsi/ufs/ufshcd.h > @@ -595,6 +595,11 @@ struct ufs_hba { > */ > #define UFSHCD_QUIRK_PRDT_BYTE_GRAN 0x80 > > + /* > + * Cleaer handling for transfer/task request list is just opposite. > + */ > + #define UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR 0x100 > + > unsigned int quirks; /* Deviations from standard UFSHCI spec. */ > > /* Device deviations from standard UFS device spec. */ Looks good to me. Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
On 5/6/2018 3:44 PM, Alim Akhtar wrote: > In the right behavior, setting the bit to '0' indicates clear and > '1' indicates no change. If host controller handles this the other way, > UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR can be used. > > Signed-off-by: Seungwon Jeon <essuuj@gmail.com> > Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> > --- > drivers/scsi/ufs/ufshcd.c | 21 +++++++++++++++++++-- > drivers/scsi/ufs/ufshcd.h | 5 +++++ > 2 files changed, 24 insertions(+), 2 deletions(-) > > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c > index 00e7905..9898ce5 100644 > --- a/drivers/scsi/ufs/ufshcd.c > +++ b/drivers/scsi/ufs/ufshcd.c > @@ -675,7 +675,24 @@ static inline void ufshcd_put_tm_slot(struct ufs_hba *hba, int slot) > */ > static inline void ufshcd_utrl_clear(struct ufs_hba *hba, u32 pos) > { > - ufshcd_writel(hba, ~(1 << pos), REG_UTP_TRANSFER_REQ_LIST_CLEAR); > + if (hba->quirks & UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR) > + ufshcd_writel(hba, (1 << pos), REG_UTP_TRANSFER_REQ_LIST_CLEAR); > + else > + ufshcd_writel(hba, ~(1 << pos), > + REG_UTP_TRANSFER_REQ_LIST_CLEAR); > +} > + > +/** > + * ufshcd_utmrl_clear - Clear a bit in UTRMLCLR register > + * @hba: per adapter instance > + * @pos: position of the bit to be cleared > + */ > +static inline void ufshcd_utmrl_clear(struct ufs_hba *hba, u32 pos) > +{ > + if (hba->quirks & UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR) > + ufshcd_writel(hba, (1 << pos), REG_UTP_TASK_REQ_LIST_CLEAR); > + else > + ufshcd_writel(hba, ~(1 << pos), REG_UTP_TASK_REQ_LIST_CLEAR); > } > > /** > @@ -5398,7 +5415,7 @@ static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag) > goto out; > > spin_lock_irqsave(hba->host->host_lock, flags); > - ufshcd_writel(hba, ~(1 << tag), REG_UTP_TASK_REQ_LIST_CLEAR); > + ufshcd_utmrl_clear(hba, tag); > spin_unlock_irqrestore(hba->host->host_lock, flags); > > /* poll for max. 1 sec to clear door bell register by h/w */ > diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h > index 8110dcd..43035f8 100644 > --- a/drivers/scsi/ufs/ufshcd.h > +++ b/drivers/scsi/ufs/ufshcd.h > @@ -595,6 +595,11 @@ struct ufs_hba { > */ > #define UFSHCD_QUIRK_PRDT_BYTE_GRAN 0x80 > > + /* > + * Cleaer handling for transfer/task request list is just opposite. > + */ Spell check - should be 'Clear' > + #define UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR 0x100 > + > unsigned int quirks; /* Deviations from standard UFSHCI spec. */ > > /* Device deviations from standard UFS device spec. */ > Looks good to me, except the spell-check.
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 00e7905..9898ce5 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -675,7 +675,24 @@ static inline void ufshcd_put_tm_slot(struct ufs_hba *hba, int slot) */ static inline void ufshcd_utrl_clear(struct ufs_hba *hba, u32 pos) { - ufshcd_writel(hba, ~(1 << pos), REG_UTP_TRANSFER_REQ_LIST_CLEAR); + if (hba->quirks & UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR) + ufshcd_writel(hba, (1 << pos), REG_UTP_TRANSFER_REQ_LIST_CLEAR); + else + ufshcd_writel(hba, ~(1 << pos), + REG_UTP_TRANSFER_REQ_LIST_CLEAR); +} + +/** + * ufshcd_utmrl_clear - Clear a bit in UTRMLCLR register + * @hba: per adapter instance + * @pos: position of the bit to be cleared + */ +static inline void ufshcd_utmrl_clear(struct ufs_hba *hba, u32 pos) +{ + if (hba->quirks & UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR) + ufshcd_writel(hba, (1 << pos), REG_UTP_TASK_REQ_LIST_CLEAR); + else + ufshcd_writel(hba, ~(1 << pos), REG_UTP_TASK_REQ_LIST_CLEAR); } /** @@ -5398,7 +5415,7 @@ static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag) goto out; spin_lock_irqsave(hba->host->host_lock, flags); - ufshcd_writel(hba, ~(1 << tag), REG_UTP_TASK_REQ_LIST_CLEAR); + ufshcd_utmrl_clear(hba, tag); spin_unlock_irqrestore(hba->host->host_lock, flags); /* poll for max. 1 sec to clear door bell register by h/w */ diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 8110dcd..43035f8 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -595,6 +595,11 @@ struct ufs_hba { */ #define UFSHCD_QUIRK_PRDT_BYTE_GRAN 0x80 + /* + * Cleaer handling for transfer/task request list is just opposite. + */ + #define UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR 0x100 + unsigned int quirks; /* Deviations from standard UFSHCI spec. */ /* Device deviations from standard UFS device spec. */