@@ -9,7 +9,7 @@
* scatter/gather formats.
* Creation Date: June 21, 2006
*
- * mpi2.h Version: 02.00.53
+ * mpi2.h Version: 02.00.54
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -121,6 +121,7 @@
* 08-15-18 02.00.52 Bumped MPI2_HEADER_VERSION_UNIT.
* 08-28-18 02.00.53 Bumped MPI2_HEADER_VERSION_UNIT.
* Added MPI2_IOCSTATUS_FAILURE
+ * 12-17-18 02.00.54 Bumped MPI2_HEADER_VERSION_UNIT
* --------------------------------------------------------------------------
*/
@@ -161,7 +162,7 @@
/* Unit and Dev versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT (0x35)
+#define MPI2_HEADER_VERSION_UNIT (0x36)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
@@ -7,7 +7,7 @@
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.46
+ * mpi2_cnfg.h Version: 02.00.47
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -244,6 +244,11 @@
* Added DMDReport Delay Time defines to
* PCIeIOUnitPage1
* --------------------------------------------------------------------------
+ * 08-02-18 02.00.44 Added Slotx2, Slotx4 to ManPage 7.
+ * 08-15-18 02.00.45 Added ProductSpecific field at end of IOC Page 1
+ * 08-28-18 02.00.46 Added NVMs Write Cache flag to IOUnitPage1
+ * Added DMDReport Delay Time defines to PCIeIOUnitPage1
+ * 12-17-18 02.00.47 Swap locations of Slotx2 and Slotx4 in ManPage 7.
*/
#ifndef MPI2_CNFG_H
@@ -810,7 +815,8 @@ typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO {
U8 Location; /*0x14 */
U8 ReceptacleID; /*0x15 */
U16 Slot; /*0x16 */
- U32 Reserved2; /*0x18 */
+ U16 Slotx2; /*0x18 */
+ U16 Slotx4; /*0x1A */
} MPI2_MANPAGE7_CONNECTOR_INFO,
*PTR_MPI2_MANPAGE7_CONNECTOR_INFO,
Mpi2ManPage7ConnectorInfo_t,
@@ -5,7 +5,7 @@
* Name: mpi2_image.h
* Description: Contains definitions for firmware and other component images
* Creation Date: 04/02/2018
- * Version: 02.06.03
+ * Version: 02.06.04
*
*
* Version History
@@ -17,6 +17,8 @@
* 08-14-18 02.06.01 Corrected define for MPI26_IMAGE_HEADER_SIGNATURE0_MPI26
* 08-28-18 02.06.02 Added MPI2_EXT_IMAGE_TYPE_RDE
* 09-07-18 02.06.03 Added MPI26_EVENT_PCIE_TOPO_PI_16_LANES
+ * 12-17-18 02.06.04 Addd MPI2_EXT_IMAGE_TYPE_PBLP
+ * Shorten some defines to be compatible with DOS
*/
#ifndef MPI2_IMAGE_H
#define MPI2_IMAGE_H
@@ -200,17 +202,17 @@ typedef struct _MPI26_COMPONENT_IMAGE_HEADER {
#define MPI26_IMAGE_HEADER_SIGNATURE0_MPI26 (0xEB000042)
/**** Definitions for Signature1 field ****/
-#define MPI26_IMAGE_HEADER_SIGNATURE1_APPLICATION (0x20505041)
-#define MPI26_IMAGE_HEADER_SIGNATURE1_CBB (0x20424243)
-#define MPI26_IMAGE_HEADER_SIGNATURE1_MFG (0x2047464D)
-#define MPI26_IMAGE_HEADER_SIGNATURE1_BIOS (0x534F4942)
-#define MPI26_IMAGE_HEADER_SIGNATURE1_HIIM (0x4D494948)
-#define MPI26_IMAGE_HEADER_SIGNATURE1_HIIA (0x41494948)
-#define MPI26_IMAGE_HEADER_SIGNATURE1_CPLD (0x444C5043)
-#define MPI26_IMAGE_HEADER_SIGNATURE1_SPD (0x20445053)
-#define MPI26_IMAGE_HEADER_SIGNATURE1_NVDATA (0x5444564E)
-#define MPI26_IMAGE_HEADER_SIGNATURE1_GAS_GAUGE (0x20534147)
-#define MPI26_IMAGE_HEADER_SIGNATURE1_PBLP (0x50424C50)
+#define MPI26_IMAGE_HEADER_SIG1_APPLICATION (0x20505041)
+#define MPI26_IMAGE_HEADER_SIG1_CBB (0x20424243)
+#define MPI26_IMAGE_HEADER_SIG1_MFG (0x2047464D)
+#define MPI26_IMAGE_HEADER_SIG1_BIOS (0x534F4942)
+#define MPI26_IMAGE_HEADER_SIG1_HIIM (0x4D494948)
+#define MPI26_IMAGE_HEADER_SIG1_HIIA (0x41494948)
+#define MPI26_IMAGE_HEADER_SIG1_CPLD (0x444C5043)
+#define MPI26_IMAGE_HEADER_SIG1_SPD (0x20445053)
+#define MPI26_IMAGE_HEADER_SIG1_NVDATA (0x5444564E)
+#define MPI26_IMAGE_HEADER_SIG1_GAS_GAUGE (0x20534147)
+#define MPI26_IMAGE_HEADER_SIG1_PBLP (0x504C4250)
/**** Definitions for Signature2 field ****/
#define MPI26_IMAGE_HEADER_SIGNATURE2_VALUE (0x50584546)
@@ -278,6 +280,7 @@ typedef struct _MPI2_EXT_IMAGE_HEADER {
#define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08)
#define MPI2_EXT_IMAGE_TYPE_ENCRYPTED_HASH (0x09)
#define MPI2_EXT_IMAGE_TYPE_RDE (0x0A)
+#define MPI2_EXT_IMAGE_TYPE_PBLP (0x0B)
#define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80)
#define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xFF)
@@ -472,12 +475,12 @@ Mpi25EncryptedHashEntry_t, *pMpi25EncryptedHashEntry_t;
#define MPI25_HASH_ALGORITHM_UNUSED (0x00)
#define MPI25_HASH_ALGORITHM_SHA256 (0x01)
-#define MPI26_HASH_ALGORITHM_VERSION_MASK (0xE0)
-#define MPI26_HASH_ALGORITHM_VERSION_NONE (0x00)
-#define MPI26_HASH_ALGORITHM_VERSION_SHA1 (0x20)
-#define MPI26_HASH_ALGORITHM_VERSION_SHA2 (0x40)
-#define MPI26_HASH_ALGORITHM_VERSION_SHA3 (0x60)
-#define MPI26_HASH_ALGORITHM_SIZE_MASK (0x1F)
+#define MPI26_HASH_ALGORITHM_VER_MASK (0xE0)
+#define MPI26_HASH_ALGORITHM_VER_NONE (0x00)
+#define MPI26_HASH_ALGORITHM_VER_SHA1 (0x20)
+#define MPI26_HASH_ALGORITHM_VER_SHA2 (0x40)
+#define MPI26_HASH_ALGORITHM_VER_SHA3 (0x60)
+#define MPI26_HASH_ALGORITHM_SIZE_MASK (0x1F)
#define MPI26_HASH_ALGORITHM_SIZE_256 (0x01)
#define MPI26_HASH_ALGORITHM_SIZE_512 (0x02)
@@ -6,7 +6,7 @@
* Title: MPI PCIe Attached Devices structures and definitions.
* Creation Date: October 9, 2012
*
- * mpi2_pci.h Version: 02.00.03
+ * mpi2_pci.h Version: 02.00.04
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -24,6 +24,8 @@
* 07-01-16 02.00.02 Added MPI26_NVME_FLAGS_FORCE_ADMIN_ERR_RESP to
* NVME Encapsulated Request.
* 07-22-18 02.00.03 Updted flags field for NVME Encapsulated req
+ * 12-17-18 02.00.04 Added MPI26_PCIE_DEVINFO_SCSI
+ * Shortten some defines to be compatible with DOS
* --------------------------------------------------------------------------
*/
@@ -41,7 +43,7 @@
#define MPI26_PCIE_DEVINFO_NO_DEVICE (0x00000000)
#define MPI26_PCIE_DEVINFO_PCI_SWITCH (0x00000001)
#define MPI26_PCIE_DEVINFO_NVME (0x00000003)
-
+#define MPI26_PCIE_DEVINFO_SCSI (0x00000004)
/****************************************************************************
* NVMe Encapsulated message
@@ -75,10 +77,9 @@ typedef struct _MPI26_NVME_ENCAPSULATED_REQUEST {
#define MPI26_NVME_FLAGS_SUBMISSIONQ_IO (0x0000)
#define MPI26_NVME_FLAGS_SUBMISSIONQ_ADMIN (0x0010)
/*Error Response Address Space */
-#define MPI26_NVME_FLAGS_MASK_ERROR_RSP_ADDR (0x000C)
-#define MPI26_NVME_FLAGS_MASK_ERROR_RSP_ADDR_MASK (0x000C)
-#define MPI26_NVME_FLAGS_SYSTEM_RSP_ADDR (0x0000)
-#define MPI26_NVME_FLAGS_IOCCTL_RSP_ADDR (0x0008)
+#define MPI26_NVME_FLAGS_ERR_RSP_ADDR_MASK (0x000C)
+#define MPI26_NVME_FLAGS_ERR_RSP_ADDR_SYSTEM (0x0000)
+#define MPI26_NVME_FLAGS_ERR_RSP_ADDR_IOCTL (0x0008)
/* Data Direction*/
#define MPI26_NVME_FLAGS_DATADIRECTION_MASK (0x0003)
#define MPI26_NVME_FLAGS_NODATATRANSFER (0x0000)
@@ -7,7 +7,7 @@
* Title: MPI diagnostic tool structures and definitions
* Creation Date: March 26, 2007
*
- * mpi2_tool.h Version: 02.00.15
+ * mpi2_tool.h Version: 02.00.16
*
* Version History
* ---------------
@@ -40,6 +40,7 @@
* Tool Request Message.
* 07-22-18 02.00.15 Added defines for new TOOLBOX_PCIE_LANE_MARGINING tool.
* Added option for DeviceInfo field in ISTWI tool.
+ * 12-17-18 02.00.16 Shorten some defines to be compatible with DOS.
* --------------------------------------------------------------------------
*/
@@ -230,11 +231,11 @@ typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST {
#define MPI2_TOOL_ISTWI_FLAG_PAGE_ADDR_MASK (0x07)
/*MPI26 TOOLBOX Request MsgFlags defines */
-#define MPI26_TOOLBOX_REQ_MSGFLAGS_ADDRESSING_MASK (0x01)
+#define MPI26_TOOL_ISTWI_MSGFLG_ADDR_MASK (0x01)
/*Request uses Man Page 43 device index addressing */
-#define MPI26_TOOLBOX_REQ_MSGFLAGS_ADDRESSING_DEVINDEX (0x00)
+#define MPI26_TOOL_ISTWI_MSGFLG_ADDR_INDEX (0x00)
/*Request uses Man Page 43 device info struct addressing */
-#define MPI26_TOOLBOX_REQ_MSGFLAGS_ADDRESSING_DEVINFO (0x01)
+#define MPI26_TOOL_ISTWI_MSGFLG_ADDR_INFO (0x01)
/*Toolbox ISTWI Read Write Tool reply message */
typedef struct _MPI2_TOOLBOX_ISTWI_REPLY {
@@ -403,7 +404,7 @@ Mpi2ToolboxTextDisplayRequest_t,
*/
/*Toolbox Backend Lane Margining Tool request message */
-typedef struct _MPI26_TOOLBOX_LANE_MARGINING_REQUEST {
+typedef struct _MPI26_TOOLBOX_LANE_MARGIN_REQUEST {
U8 Tool; /*0x00 */
U8 Reserved1; /*0x01 */
U8 ChainOffset; /*0x02 */
@@ -434,7 +435,7 @@ typedef struct _MPI26_TOOLBOX_LANE_MARGINING_REQUEST {
/*Toolbox Backend Lane Margining Tool reply message */
-typedef struct _MPI26_TOOLBOX_LANE_MARGINING_REPLY {
+typedef struct _MPI26_TOOLBOX_LANE_MARGIN_REPLY {
U8 Tool; /*0x00 */
U8 Reserved1; /*0x01 */
U8 MsgLength; /*0x02 */
Updated MPI to 2.6.8 specification and header files to 2.00.54. Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> --- drivers/scsi/mpt3sas/mpi/mpi2.h | 5 +++-- drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 10 +++++++-- drivers/scsi/mpt3sas/mpi/mpi2_image.h | 39 +++++++++++++++++++---------------- drivers/scsi/mpt3sas/mpi/mpi2_pci.h | 13 ++++++------ drivers/scsi/mpt3sas/mpi/mpi2_tool.h | 13 ++++++------ 5 files changed, 46 insertions(+), 34 deletions(-)